How to draw these ornaments?

Hello!
I'm trying to recreate this thing:
1. How do I draw those circular ornaments? Like the joining together of those circular lines seems really difficult, I have no idea where to start.
2. The rest should be pretty straight forward right? Ie. just draw everything straight horizontally and then somehow do some sort of circular bend?
Thanks!

Thanks, Bugge!
I think I'm getting there:
Download: Untitled-1.ai
In addition to your posts I found Illustrator: Pen Tool (Curves) - YouTube very helpful.
Anything you guys would change with regards to my points or paths or whatever they're called?
Many thanks!
P.S. Check out "Bugge Wesseltoft" on YouTube if you haven't already :-)

Similar Messages

Can anyone tell me how to draw these pictures

i dunno how to draw the lower two circuits ...can anyone draw them for me ?
Attachments:
Picture 001.jpg ‏821 KB

If your drawing for cct 3 is correct (with a node/junction @ the center of the X), then it will be like mostafa_cct3-1. This is equivalent to the next cct that I have drawn, i.e. mostafa_cct3-2.
It's your drawing, only you can tell if it is drawn correctly (or ask your lecturer?). Calculating the current is simple in this case - just a matter of series/parallel resistors.
Attachments:
mostafa_cct3-1.jpg ‏61 KB
mostafa_cct3-2.jpg ‏58 KB

How to draw valves and tanks in labview 6

hello all
I am a beginner in LabVIEW. As a newcomer I have done small programs on blinking LEDs and controlling water level in tank and so on. Now I am doing a project on gas mixer. While exploring through the examples I saw a more or less similar example in the HELP option. In the GUI there were valves and tanks and pipes. Now my question is that how will I be able to draw these pipes, valves etc in the front panel of labview?
Thanks in advance
Rohini
N.B i am attaching the picture of the front panel.
Solved!
Go to Solution.
Attachments:
gas mixer.JPG ‏98 KB

You asked basically the same question in July 2010, and it was indicated that the valves and tanks came from the DSC module. If you cannot buy it then you will need to use LabVIEW's Control Editor to customize controls. The LabVIEW Help describes how to customize controls. You can also search the NI site for examples, like this one:
http://decibel.ni.com/content/docs/DOC-4819

How to draw a line of sin x and its area under the line?

Hi,
I know how to draw a line from two points. However, I do not know how to draw a line of function sin(x) and its area under the line. Anyone know where to read or how can I draw it, please help me. Thanks !!
Calvin

use Graphics2D:: draw(Shape)
create a class that implements Shape, and specifically the getPathIterator methods, in these methods you should return a path iterator that follows the sin/cos curve.
All fairly simple to do.
rob,

I get nothing but error messages, -"Your IMAP server wants to alert you to the following: 113 that mail is not available" or 364? there are hundreds stacked up.You must give answers to how to fix these when we do "search" add the error code number

I get nothing but error messages, -
"Your IMAP server wants to alert you to the following: 113 that mail is not available" or the same with: 364?
Now there are hundreds stacked up on my desktop.
I cannot find the answer anywhere. You need to give answers to how to fix these errors because when I "search" "error code" or the number there is NOTHING. NOTHING! Yet you give us these stupid error codes
then you do not give us ANYTHING on how to fix these. These error codes make me so mad it makes me hate outlook, and hate the developers and hate microsoft. How in the world can you give us ERROR codes without the explanation of what
to do or how to fix it. You need to add each error code number in your "search" then explain what it is and how to fix it. I am not a tech. I am a lawyer. I have googled the entire string of error code and nothing is clear.
So, for the last several years, I get these error codes. Also, there is another error code that won't go away--it is the password error code that asks if I want to store the password. Yes, so I say YES. but it pops back. I am sick of this. This is the reason
I hate Microsoft and I love google. #1 they respond to error, #2 them try to fix them you do not. I paid the full price to buy the OUtlook 2010, almost $500 just to get outlook, and all I got was error codes. I could not even open it because all I would get
was that error codes and NO ONE knew how to fix them. WHAT IS YOUR PROBLEM that you cannot fix the stupid error codes that you imbed? PLEASE HELP

Hi,
I understand how frustrated you are when facing such an issue, maybe I can provide some suggestions on the problem.
Based on the description, you should be using an IMAP account setup in Outlook. As for the error message, usually it's caused by a corrupted message on the Server. I suggest you logon the Webmail site, check if sending/receiving emails works well.
If you find any unusual emails that cannot be read or sent, try deleting them to try again.
I also suggest you create a new profile to setup the IMAP account:
http://support.microsoft.com/kb/829918/en-us
Contact your Email Service Provider to get the correct and latest account settings, since you have been using Outlook for years, some settings may have been changed while you haven't been informed.
For the steps to setup an account in Outlook 2010, please refer to:
http://office.microsoft.com/en-001/outlook-help/add-or-remove-an-email-account-HA010354414.aspx
I hope this helps.
Regards,
Melon Chen
TechNet Community Support

My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?

My Apple TV was set up with a different Apple ID than I have for my ITunes Account. In other words I have multiple Apple ID's. How can get these accounts to sync up?

If you wish to use home sharing then you need to setup the Apple TV under your ID.

How to draw horizontal line in smartform after end of the all line items

Hi Friends,
I am working on the smartform. I have created TABLE node in Main window.
i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
Could you please help me how to resolve this issue.
FYI: I tried with the below two options. But no use.
1. desinged footer area in the table node of the main window.
2. tried with uline and system symbols.
please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
this is very urgent.
Thanks in advance
Regards
Raghu

Hello Valter Oliveira,
Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
Could you please tell me how to insert blank line text.
1 - in your table, create a line type with only one column, with the same width of the table
2 - in table painter, create a line under the line type
3 - insert a blank line text in the footer section with the line type you have created.

When I forgot my password for home screen and it disabled my iPod, i had to reset my iPod. My iCloud had saved all of my data such as photos in storage or something. But I do not know how to access these photos. Any ideas?

How do i access my photos that were saved in icloud storage from before i had to reset everything. I know the photos can still somehow be accessed because icloud showed that space was being taken up for photos straight after i had reset the device and there were no photos there on the device at the time. So any ideas on how to access these photos from icloud? Any help very much appreciated, thanks.

iCloud: Restore your iOS device from iCloud

How to draw text vertically, or in an angle

please help me how to draw text vertically, or in an angle

I robbed the framework from Dr Las or 74phillip (don't remember which) ...
import java.awt.*;
import java.awt.geom.*;
import javax.swing.*;
import javax.swing.event.*;
public class AngleText extends JPanel {
private int      degrees = 16;
private JSpinner degreesSpinner;
public AngleText () {
    setBackground ( Color.WHITE );
} // AngleText constructor
protected void paintComponent ( Graphics _g ) {
    super.paintComponent ( _g );
    Graphics2D g = (Graphics2D)_g;
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON );
    AffineTransform at = AffineTransform.getRotateInstance ( Math.toRadians ( degrees ) );
    Font f = g.getFont();
    g.setFont ( f.deriveFont ( at ) );
    g.drawString ( "Rotating Text!", getWidth()/2, getHeight()/2 );
    g.setRenderingHint ( RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_OFF );
} // paintComponent
public JPanel getUIPanel () {
    SpinnerModel degreesModel = new SpinnerNumberModel (
                                  degrees // initial
                                 ,0        // min
                                 ,360      // max
                                 ,2        // step
    degreesSpinner = new JSpinner ( degreesModel );
    degreesSpinner.addChangeListener ( new DegreesTracker() );
    JPanel panel = new JPanel();
    panel.add ( degreesSpinner );
    return panel;
} // getUIPanel
// DegreesTracker
private class DegreesTracker implements ChangeListener {
    public void stateChanged ( ChangeEvent e ) {
      Integer i = (Integer)((JSpinner)e.getSource()).getValue();
      degrees   = i.intValue ();
      repaint();
} // DegreesTracker
// main
public static void main ( String[] args ) {
    JFrame f = new JFrame ( "AngleText" );
    f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
    AngleText app = new AngleText();
    f.getContentPane().add ( app );
    f.getContentPane().add ( app.getUIPanel(), BorderLayout.SOUTH );
    f.setSize ( 200, 200 );
    f.setVisible ( true );
} // main
} // AngleText

How to draw vertical lines in SMART FORMS

Hi Guys,
Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
thanks,
Ramesh

Hi Ramesh,
In the window output options you have option of check box to get lines.
Then you need to give the spacing for vertical and horizontal.
Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
Put the cursor on the WINDOW in which the lines you want.
Right click on it>create>complex section.
In that select the TEMPLATE radio button.
Goto TAB TEMPLATE.
Name: give some name of line.
From: From coloumn.
To: To coloumn
Height: specify the height of the line.
Next give the coloumn widths.
Like this you can draw the vertical and horzontal lines.
If the above option doesnot workout then u can try the below option also
any how you can draw vertical and horizontal lines using Template and Table.
for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
if this helps, reward with points.
Regards,
Naveen

When closing and reopening, my tabs aren't restoring like the once did. My history is only keeping one day. Need to know how to change these settings.

When closing and reopening Firefox, my tabs aren't restoring like they once did. I used to have all my tabs restore each time I opened Firefox. Now it starts with one fresh new tab and all my others are lost. I do a lot of research so this is important.
My history is only displaying one day even though I have never changed my settings even after I updated it last year.
Need to know how to restore these settings.
***OH! special note: I can't use the recently closed tabs or recently closed windows because its a grayed out option****

Are you using cleanup software like CCleaner?
If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.
* http://kb.mozillazine.org/Session_Restore
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Java Plug-in 1.6.0_05 for Netscape Navigator (DLL Helper)
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that ! Do you get the idea ? Thanks !

I would like to know how to draw up a list in a cell (like a pull-down menu) to ease data capture, but I don't know how to do that !
Do you get the idea ?
Thanks ever so much !

the numbers manual can be downlaoded from this website under the Apple support area...
http://support.apple.com/manuals/#numbers
What your looking for is written out step by step for drop downs and all other special types of user input starting around page 96 in the '09 manual.
Jason

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

How to draw table in layout in module pool

how to draw table in layout in module pool with wizard or table control

Hi
Goto Screen Painter .
here we can create table in 2 ways,
with wizard and without wizard.
with wizard it will step by step...
for without wizard (its quite easy)
Click Table control and Drag into ur screen.
then --> click input box and place into to that table control
for two column do this two times.
then for header click the text icon in left side and drag into
correspoding places .. then ur table is ready..
then give names using double clicking the elements
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
Reward if useful.

My library has went from thousands of songs to 60 and i dont know why, any suggestions how to get these back?

My library has went from thousands of songs to 60 and i dont know why, any suggestions how to get these back?

See Empty/corrupt iTunes library after upgrade/crash.
tt2

How to draw these ornaments?

Similar Messages

Maybe you are looking for