How to draw vertical and horizontal lines on chart as shown in image below%3F

Hi,
Is it possible to draw a horizontal line (63% as shown in image or 15.75 and vertical line at intersection to X axis) in chart.
please suggest code
Regards
mms79

Have you tried using cursors?  Right click on the chart and show the cursor legend.  Then right click the legend and add a cursor. 

Similar Messages

  • Herringbone lines, and vertical and horizontal lines on display which dims

    I have an iMac G5 purchased in 2005, six months later under the extension program for the video and power issues, Apple installed a new motherboard and a new power pack. Up to now, everything has been okay.
    This morning I turned on my computer and saw the same herringbone lines, vertical lines, horizontal lines on the display which went from dark to light in color. I waited for a while, and a message said to restart my computer which I did.
    Because of the previous problems, I am wondering if the motherboard or power pack is going out again. After the start up, my computer was okay for the rest of the day. I took some photos and a video of it to show what is happening to the display, any suggestions.

    Thanks Scott for the quick reply. Knowing what happened five years ago with the display, I figured that this was the same issue. It is just a matter of time. I quickly backed up my system to another hard drive and wanted to confirm in the discussion group that my G5 was on it's last gasp.
    Since I would be lost without my computer, I just put in an order for the new iMac 27" quad core i5 computer. Now I will have to make monthly payments again, but I think that I will have a much faster, and better computer especially with the Intel processor.
    Thanks for your reply, and I hope that my new computer will last longer than five years. My track record was five years for my lime green iMac G3, and now five years for my iMac G5.
    Thanks again,
    DaisyMay

  • Dropped my iPhone 4 and now There are strange vertical and horizontal line plus red/orange background. What is the problem and how do I fix it ?

    I can't see the apps or unlock my phone but at the top I see the time/mobile service ect.(it is turquise as if the colour has been reversed) and get notifications! Voice control ect. works as well !

    I think that there is a problem with your lcd screen which can only be fixed by replacing the whole lcd assembly. You should definitely take your phone to an apple store and have them fix it. Please dont attempt to replace the lcd screen by yourself because you can and will do more damage to your phone. Take it to an apple store and they will fix it for you.

  • How to draw vertical lines in SMART FORMS

    Hi Guys,
    Can anyone please let me know how to draw vertical and horizontal lines in smart forms, i have to do this in the secondary window.
    thanks,
    Ramesh

    Hi Ramesh,
    In the window output options you have option of check box to get lines.
    Then you need to give the spacing for vertical and horizontal.
    Another option is putting a template on window and getting the boxes, but it is quite little bit complex.
    Put the cursor on the WINDOW in which the lines you want.
    Right click on it>create>complex section.
    In that select the TEMPLATE radio button.
    Goto TAB TEMPLATE.
    Name: give some name of line.
    From: From coloumn.
    To: To coloumn
    Height: specify the height of the line.
    Next give the coloumn widths.
    Like this you can draw the vertical and horzontal lines.
    If the above option doesnot workout then u can try the below option also
    any how you can draw vertical and horizontal lines using Template and Table.
    for Template First define the Line and divide that into coloumns and goto select patterns and select the required pattern to get the vertical and horizontal lines.
    For table, you have to divide the total width of the table into required no.of columns and assign the select pattern to get the vertical and horizontal lines.
    if this helps, reward with points.
    Regards,
    Naveen

  • Why are some of my pages centering themselves (vertically and horizontally) after I select the "Shrink document to avoid overwriting..." option under Add Headers and Footers?

    I'm working in Adobe Acrobat X Pro. I added header and footers through Adobe. I needed to select the "Shrink document to avoid overwriting the document's text and graphics" feature under the "Appearance Options..." option within the "Add Header and Footer" window. Some of the pages in my document that only had a few lines of text on them centered themselves (vertically and horizontally). How can I prevent that from happening?

    Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Word document pdf printing with vertical and horizontal pages

    I have a Word document that has both vertical and horizontal formatted pages.  When I print to PDF, the I get a new pdf file whenever a page orientation change is found.  pages 1 to 7 are vertical, 8 to 12 are horizontal and 13 to 20 are vertical again.  If I print to a file named "out_to_PDF" I get 3 files named "out_to_PDF", "out_to_PDF2" and "out_to_PDF3", the first one with pages 1 to 7, the second one with pages 8 to 12 and the third one with the remaining pages.  Is there a way to get only one file with all the pages?
    I know I can merge the files later.  This file with 20 pages is no problem.  I have several 70+ page docs, with multiple changes between horizontal and vertical that will result in 20 or more separate pdf files.
    Any pointers?

    Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
    You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
    This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

  • Quick Look PDF with vertical and horizontal pages

    Is there any way to make Quick Look preview a PDF file with vertical and horizontal pages without adding white padding and retaining the aspect ratio?
    Now, if I have a PDF with page 1 vertical and the other pages horizontal QL shows the latter also with the ratio of a vertical page and adds white padding at their top and bottom. You get the inverse output if the first page is horizontally oriented, but the rest are vertical.

    Word renders print jobs that change the orientation as separate print jobs. So, each print job becomes its own PDF.
    You can make an Automator workflow to combine PDFs. I’m not sure how it decides the order it combines them, so you’d have to experiment.
    This is built as an Application where you’d drop all of the PDFs onto the App icon and it will open the combined PDF where you can edit, name, and save.

  • Center all vertically and horizontally?

    I'm trying to self-publish a book using CreatSpace on Amazon.  They want an extra 1/8" around all margins of a 6x9" book (actually more on the width) to allow for bleed.  I have to generate a PDF.  When I changed the page size it kept the type in the same spot, and made the pages jump back and forth a little in the PDF.  It would be good if they stayed in the same place.  How can I center ALL the artwork -- including the headers on the master page -- both vertically and horizontally to fill a particular page size?  Thanks for any advice.

    There may be a bit of miscommunication going on. You should be designing with the final trimmed page size in mind, and if you have images or solids that need to bleed, they need to extend beyond the trim size. When output to PDF, you specify whether to include crops and bleeds, and the size of the crop marks and bleed area. For example, if you want something like this crappy example I just knocked off:
    You would set up your page size at 6x9 and place the images like this:
    …and when output to PDF with the marks of your choice:
    …you get something like this:
    …which results in a PDF whose size is 6.83x9.83, but when trimmed will be 6x9. If you measure from the crop marks, the size is 6x9, and if you measure from the bleed marks, the size is 6.25x9.25, which is the trim size with 1/8" bleeds on all sides. Ask the publisher what marks they would like. They may not want bleed guides or color bars, so just give them what they want.

  • Center vertically and horizontally with a single layout?

    verticalLayout has the horizontalAlign property, and horizontalLayout has the verticalAlign property.  How can you use a particular layout to determine the flow of the children, but also specify vertical and horizontal alignment?  In Flex 3 this was as simple as <VBox verticalAlign="middle" horizontalAlign="center">...

    Take a look at http://forums.adobe.com/thread/448063
    If you don't want to use extra containers then you could use Spacer components.
    For example to align vertically in the center:
    <s:VGroup width="200" height="200" horizontalAlign="center>
      <mx:Spacer height="100%" />
      <s:Button label="center aligned" />
      <mx:Spacer height="100%" />
    </s:VGroup>
    Or at the bottom:
    <s:VGroup width="200" height="200" horizontalAlign="center>
      <mx:Spacer height="100%" />
      <s:Button label="center aligned" />
    </s:VGroup>

  • How to draw a straight  dotted line on Bar chart at 70%?

    Hi
    Could you please let me know how to draw a straight dotted line on BAR CHART at 70%?
    Thank you

    Hi,
    This may vary depending on what version of crystal you are using.
    Right click on the graph & go to 'chart options' & choose 'Grids'
    In the grids pane go to the grids tab.  From there check the 'draw custom line at' and specify where you want to draw the custom line.
    Once the line is drawn highlight the line, right click and go to 'chart options' & 'selected item'.
    select what format you want the line to look like (choose the dashed one).
    good luck!

  • Can't fix jagged images and horizontal lines when scanning

    Hello, I just bought the HP Envy 5660 and it prints fine but scanning is horrible. I keep getting jagged and horizontal lines after scanning. They came out fine a few times but even on 300 ppi it looks bad. Please give me some advice. Thank you.

    Hello Hulkamania,
    Welcome to the HP Forums.
    I see that you are having some issues with the scan quality with lines and jagged images.
    I have seen this issue before and I was able to resolve it quit easily by doing one simple step.
    Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Use the ON/OFF button to do a proper power cycle on the printer once it has been connected to a wall outlet.  This will do a Semi Power reset on the printer.
    Try another scan and let me know how it turns out.  Try multiple scans if you like.
    Thanks for your time.
    Cheers,  
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • HP LaserJet 5500dtn print quality issues: vertical and horizontal streaks

    Hi,
    I am getting large vertical yellow streaks, accompanied by cyan and magenta vertical dashes on each print.  Also, each page has vertical and horizontal black streaks.  I've cleaned the fuser and that hasn't made much of a difference.  I've also tried cleaning some of the cartridges, which didn't help.  The internal roller of each cartridge continues to get covered with excess toner.  Furthermore, I get a weird offset of some of the text (a faded version of the text that is offset about 1.5" from the regular text).  Is there anyway to fix this issue by cleaning certain parts?  Any other suggestions?  Thanks

    Hi,
    Yes it is in Warranty. It is virtually brand new.
    After I last posted I got through to the online chat support and was sent an email with options to 'troubleshoot' which I had already done with no success.
    I was also given a link to try to update the printer firmware - which I will try when I get home from work.
    I will see if that makes any difference but am sceptical as the printer worked fine the first time round but hasn't worked since and nothing has changed on it.
    Chris.

  • Center text in text field - vertically and horizontally

    Hi to all,
    I have a text field with a specific size (for example 10x10 cm) I need this size because all the fields in the report must have this minimum size and they just can grow vertically (expand).
    But i need to put the text centered in the field, vertically and horizontally. just in the middle whatever the size of the box.
    The parameter "Center" in justify text doesn't help. Only adjust horizontally.
    Thanks in advance.
    Filipe Almeida

    Hello,
    If you want to center vertically, you have to use an anchor .
    Regards

  • How to provide space and new line to the text in AI Script

    how to provide space and new line to the text in AI Script

    ?? can you explain better, can you at least add another sentence?
    space
    var mySpace = " ";
    new line
    var newLine = "\n";

  • Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.

    New Iphone 5 rotates between vertical and horizontal modes, but does not flip vertically.
    Tried restarting, checked the lock, gyroscope.

    Hey Oprion,
    Thanks for the question and congrats on your new iPhone 5c. The orientation of your iPhone will depend on the application you are using. For example, most of the built in applications only support the three main orientations (Horizontal, Vertical, Horizontal), whereas the Voice Memo’s application will operate “upside down” for easier access to the microphone.
    Change the screen orientation - iPhone
    http://help.apple.com/iphone/7/#/iph3badf94ec
    Thanks,
    Matt M.

Maybe you are looking for