How to dual boot window 8.1 64 bit with xp sp1?

Hello Hp PC Experts,
Sir i was bought HP 15-r119TU two week  ago. So i face problem of dual boot with this HP note book. I need dual boot  window 8.1 64 bit with XP SP1. Kindly help me at the earliest possible.

@mp56 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • [SOLVED] Dual boot windows 7 and arch Linux with seperate hard drives

    Ok so I'm stuck trying to get my computer to dual boot windows 7 and arch. They are installed on different hard drives and I have grub 2 as the boot loader. I can't find any tutorials on how to do it with seperate hard drives I know how to do it if they are on the same hard drive. Also I want windows on the "first" hard drive how do I check to see which one it considers the first?
    Last edited by bdawg (2012-09-21 23:15:37)

    DSpider wrote:
    drobole wrote:If you want to change it so that sda becomes sdb and sdb becomes sda, you should be able to do that in BIOS.
    Not from the BIOS. He would need to physically open up the computer and switch the cables between them (or add another drive).
    There's no actual performance increase in changing this order. Performance increase is when you have the partitions as close to the beginning of a HDD as possible, where the platters spin faster (basic mechanics, not to be confused with CD/DVD, which are being written from the inside-out to prevent errors after extended usage), and it especially doesn't apply to SSDs whatsoever.
    You may be right about that. I remember I had to do this a while back but I probably switched the cables. It also messed up the drive mapping in Windows 98 if I remember correctly.

  • Dual booting Windows 8 and Arch Linux with UEFI

    Hi all!
    I'm trying to install Arch Linux on my computer where I already have Windows 8, and I'm getting a little stuck when it comes to the partitioning.
    Following the beginner's guide and the method here: https://wiki.archlinux.org/index.php/Un … n_in_Linux for setting up the partitions properly, regarding UEFI. My problem is that when using cgdisk to set up a new EFI system partition (ef00), I get an error message when trying to write the partition table (just saying that something went wrong). I figure the problem is that I already have a partition like this (correct me if I'm wrong), but it really looks like it succeded (see info below). So my question is: How do I preceed to keep my Windows 8 installation happy, but installing Arch? Do I remove the old EFI system partition and create a new one, or is there some method that allows me to edit the already existing one, to allow me to dual boot Windows 8 and Arch?
    My partition table now looks like this:
    Part. # Size Partition Type Partition Name
    1007KB free space
    1 500MB Windows RE Basic data partition
    2 300MB EFI System EFI system partition (this one was already present on my system)
    3 128MB Microsoft reserved Microsoft reserved partition
    4 63.5GB Microsoft basic data Basic data partition
    8 512MB EFI System EFI System partition (this is the one I tried to create when I got the error message)
    5 29.5GB Linux filesystem Arch (this is where I was going to put my Arch installation)
    6 22GB Windows RE Basic data partition
    7 1024MB Windows RE Basic data partition
    615KB free space
    Just for the record; I only created partition #8 and #5.
    Any help is appreciated! And sorry for beeing a total noob, but I really suck at this.

    sudo make sandwich wrote:If it is possible to share ESP between OSes, how do I do this (would it be sufficent to follow this section: https://wiki.archlinux.org/index.php/Beginners'_Guide#For_UEFI_motherboards)?
    There's really very little to do to share an ESP between OSes. Most OS installers will auto-detect the ESP and use it. Problem solved. For Arch it may be a bit more effort just because Arch uses a more hands-on installation process, but I've only done a couple of Arch installations, and the last one was several months ago, so I don't recall the details clearly enough to comment.
    And how big will the partition need to be? The beginner's guide says 512MB or higher.
    I don't know what was in the mind of the author, but my guess is that's because that's roughly the cutoff point where mkdosfs starts creating FAT32 by default rather than FAT16. The ESP is officially supposed to be FAT32, not FAT16, although FAT16 usually works OK. It's also possible to create FAT32 on smaller partitions by using an explicit option to mkdosfs ("-F 32").
    The optimal size of the ESP depends on the files stored on it. If you don't store your Linux kernels, something as small as 100MiB is usually adequate; but a few Linux kernels and their initrd files can consume twice that amount. My own recommendation is for the ESP to be 200-500MiB.
    The only error message I got from cgdisk is "Problem saving data! Your partition table may be damaged!", however booting Windows again works fine. Parted did not complain about antything.
    Use the "verify" function in cgdisk. That will reveal any problems with the data structures. If a verify turns up OK, then that means that cgdisk ran into some sort of disk problem. Running gdisk rather than cgdisk and using the gdisk "w" option (without making any changes) may produce a more helpful error message.

  • [SOLVED] How to dual boot windows on separate drive with syslinux

    I'm trying to follow the directions from the arch syslinux wiki to add a windows dual boot option to my current syslinux.
    I have two hard drives: sda (windows MBR) and sdc (arch linux GPT). My BIOS is set to boot sdc, and syslinux is currently installed fine to boot arch linux off of sdc. I would like to add an entry to boot windows.
    I added an entry to /boot/syslinux/syslinux.cfg that looks like
    LABEL windows
    MENU LABEL Windows
    COM32 chain.c32
    APPEND mbr:0xf00f1fd3 # my actual identifier for sda from fdisk is here
    When I rebooted, I saw the new entry in the syslinux menu. When I went to arch linux, it booted fine. When I rebooted again and selected windows, it hung with a blinking underscore. The next time I rebooted, it didn't even get to the syslinux menu and just hung with a blinking underscore.
    I booted from my rescue arch usb drive. In fdisk, sdc's partition table now mirrored sda's! In other words, it looked like I had windows partitions on my linux drive, and it had the same MBR identifier even though it was supposed to be GPT. I ran gdisk /dev/sdc, it detected both GPT and MBR, and I asked it to use the GPT table and wrote out the partitions, and my drive looked normal again. I ran arch-chroot, syslinux-install_update, and everything was fine the next time I booted.
    Any advice on how I can set up windows dual boot with syslinux?
    Last edited by mikemintz (2013-08-17 18:25:46)

    I am assuming that you use Bios and not UEFI (I am not that quite familiar with UEFI).
    1) You must configure the Bios to boot from the disk where syslinux is installed, having a correct mbr and with syslinux correctly installed.
    2) The disk where windows reside must be bootable by itself with a valid mbr.
    It may be possible that windows try to boot from the linux disk (and of course fails), try to add the swap option to the chain command.
    To check if Windows is correctly installed, try to boot it directly from the Bios.
    The mbr of the syslinux disk should be gptmbr.bin:
    dd if=/usr/lib/syslinux/gptmbr.bin of=/dev/sd<letter of the linux disk> bs=440 count=1
    Warning: Be very careful with what you do with dd, it is very easy to destroy all your data!
    Last edited by olive (2013-08-17 08:31:44)

  • DUAL BOOT windows 7 and linux HELP with Current info on BIOS, MBR vs GPT, etc

    I have a feeling this should be easier than what I'm making it.  Please educate me on Lenovo's BIOS Setup menus, etc.
    I have installed easyBCD in Windows 7, and plan to use it to set up my new boot menu with Linux Mint (and possibly other distros).
    I am using a live DVD.  I inserted the DVD and went into SETUP and selected to boot off the DVD drive.  It started to boot into Linux and all was going well.
    However, I realized that I had not checked on the Secure features (Secure Boot, EFI).  So I shutdown again and went into BIOS.  I went to the SECURITY menu and Disabled UEFI.  Then I disabled Secure boot.
    Tried to boot off the DVD and couldn't get anywhere.  Kept putting me back into the window to select the boot device over and over again.  THought I'd ruined my machine
    Anyway, finally stumbled upon STARTUP menu, and put it into EFI Legacy, and I was able to get back into Windows 7.
    Obviously before I pursue this further, I need some educaiton on your MENUS, Lenovo and EFI/Secure Boot.
    I have a feeling that I can probably now install the Linux but want to make sure my settings are correct before I pursue.
    Thanks, Kim
    Moderator note:  this thread gets more Linux-flavored with each post   Moved from the "T" board to the Linux board.

    Hi, thanks for ans.  Your specs are almost identical to my T530 ,which I should have listed.  The only diff is
    I have an i7 35something processor.   Same intel card, RAM and HDD, not that that should matter I'm guessing.
    I purposely avoided the Nvidia card because of all the heaadaches with Nvidia. 
    I have to teach a class tomorrow and I need to clean up my notes.  (Definitely not computer related...LOL.)  I don't want to  be stressed out about this during class, so I plan to wait to attempt a new install tomorrow afternoon.
    What I have done is find out some more info about dual booting with windows 7.  I went in to windows 7 to shrink the C: partiition and it said I'd have to reserve at least 220 GB for MS!  Not what I wanted; I don't really care a thing for MS.  I was born and raised on Unix and Linux; I never really fiddled with MS after the demise of MS-DOS during my college days.
    Given that, and the fact that I'd lose half my 500 GB HDD to the Borg, I may just chuck the entire dual boot thing and just load Linux on it. 
    If you say you're running Linux on it just fine, that would be a great encouragement.  No HW problems at all? Everything working fine?  Which distro are you using? 
    I plan to test Mint, Fedora, PCLinuxOS, Mageira (sp?), saybahon (sp again?), Debian Wheezy, and even Pear, LOL. I'll keep trying till I find a distro to run on my Lenovo T530, but I'm guessing all of 'em should do okay.
      I have Lubuntu I could give a spin, as well and Crunchbang and Bodhi, but they're all 32 bit.  (I have an antique Dell desktop that I still use down in my woman cave.)

  • Can I dual boot windows 7 and mountain lion with an external hard drive.

    I have Mac OSX mountain lion installed and running on my 2TB external hard drive. Boot camp says that I have to use the default flash storage that came with my computer.. Is there a way to put it on my external hard drive if I partition it? I also am having a problem when I tried to use the default storage the setup would not let me format it to NTFS

    By default, Boot Camp formats the drive with FAT32. That's because Windows XP could be installed with FAT32 so, in order to write on that partition on Mac OS X, Boot Camp used it instead of NTFS.
    If you want to install Windows 7 (it's the only version that your Mac supports), you will have to format the Boot Camp partition in NTFS manually. To do it, just start the Windows installation as usual but, on partitioning screen, choose "BOOTCAMP" volume, press "Drive options" and then, Format, so the partition will be formatted in NTFS and you will be able to install Windows

  • How to dual boot Windows XP and Windows 7 (XP installed first)

    All information about it available here.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

    I just installed 7 on a different partition where I usually test other OS's, and it worked fine, without any tweaking needed.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • T440P Dual Boot Windows 8 with Centos 7

    So I have a T440p with Windows 8 installed. I have been trying to dual boot Centos 7 and also have attempted Centos 6.5. I have been using a bottable USB to perform the installation for both Centos 7 and 6.5.
    When I try the Centos 7 install, I set the boot priority to USB first on startup, and it goes to a screen that lists options to install, verify Centos 7 or troubleshoot. Upon selecting any of these options, everytime I get the error message:
    "alua: not attached"
    When attempting the Centos 6.5 Live DVD install, I try to boot into the Live mode, but it freezes in the process each time.
    I have heard about there being issues dual booting Windows 8 in UEFI mode with another Linux Distrobution.
    Has anyone here sucessfully dual-booted Centos or any other Linux Distrobution on a T440P?
    Any help/advice would be much appreciated.
    Thanks

    It's been many, many years since I don't do dual boot anymore. Don't find the reason to do it, either. Different kinds of virtualization should be enough. Anyway...
    dfw1417 wrote:
    It took over 2 days to figure out how to adjust the bios to get my win 7 pro DVD to boot and install dual boot on this GREAT MACHINE!!
    ENJOY! This is the BEST machine I ever had!
    WHICH machine?
    Cheers.
    If I helped you, please give me some kudos! ^^

  • Dual Boot Windows 8 and Linux?

    I have (UEFI System) an ASUS K55A UEFI motherboard laptop that came factory with Windows 8. I would like to install backtrack linux and Windows 8, but before I go screwing up my laptop, I want to see if this would be at all possible. I would use a virtual
    machine, but I need Backtrack Linux on a physical machine for testing purposes as I am taking a course in computer forensics, and I want to test cracking my home wi-fi. My processor is an Intel Core i5 2.5 ghz with a 500 GB HDD and 8GB DDR3 RAM. Any insight
    on this would be appreciated. Thank You.

    Hi,
    You can refer to this article to get detail information.
    http://apcmag.com/how-to-dual-boot-windows-8-and-linux.htm
    Niki Han
    TechNet Community Support

  • Dual Boot Windows 7 and solaris 10

    Can some body guide me how to dual boot windows 7 and solaris 10?
    Thanks

    First partition your harddisk with at least 2 primary partitions, one for windows and the other for solaris if you only have one harddisk. It would be a good idea to create an additional small boot partition as the first partition as well if you intend on using an independent boot loader but it really depends on what your machine is capable of. For example, if you have multiple harddisk and your BIOS supports it, then you could just install each OS onto its own harddisk and use the BIOS function to disable/boot off specific harddisk. Otherwise, if you only have one harddisk and created multiple partitions, install windows7 first followed by solaris10, obviously installing into different partitions. If you have created a boot partition, then you can install the boot loader into that dedicated partition.

  • Dual Booting Windows 7 with pre-installed Windows 8 Laptop

    Hi All,
    Just after a bit of advice, my girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
    She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
    I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
    What would be the best way to dual boot?
    Cheers,
    Ben 

    Hi Ben,
    Here is a detailed guide for your reference:
    How to Dual Boot Windows 8 with Windows 7
    http://www.pagestart.com/win8dbwin701181301.html
    This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on
    these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
    Hope this could be helpful.
    Kate Li
    TechNet Community Support

  • How to dual-boot/boot other OS on a K410?

    I understand that my K410 model has Windows 8 OEM as standard, and I want to dual-boot another operating system over it. However, I have heard people claiming that this can potentially corrupt the Lenovo recovery section, so would it be possible to install Windows 7 over a secondary HDD? And can this be done if the motherboard is already tied to a Windows 8 x64 version?
    Thanks

    hi gibson221,
    Yes, it's possible to dual boot Windows 7 and Windows 8 with Windows 8 installed first.
    Try this method:
    1. Turn OFF the PC and remove the stock HDD and install the new HDD (see page 29 of the hardware maintenance manual for instructions)
    2. Turn ON the PC and boot into the BIOS by pressing F1. When you're in, navigate to the Startup & Exit Tab and set the following settings:
    UEFI Boot Mode = Legacy
    Secure Boot = Disabled  (if applicable)
    CSM = Disabled or Legacy (if applicable)
    OS Optimized Default = Disabled or Legacy (if applicable)
    Then go to "Primary Boot Sequence" on the startup tab and set the priority to the following:
    1st = Optical Disc Drive
    2nd = Stock HDD
    3rd = New HDD
    When finished, press F10 to save and exit BIOS.
    3. Insert the Windows 7 installation disc and install the OS on the new HDD. When done, remove your Windows 7 installation disc and turn off your PC. 
    4. Reconnect the stock HDD then turn ON the PC. The unit should boot into Windows 8. When you're in, install EasyBCD  and add a WIndows 7 entry into the Boot Menu.
    Check this articles in reference:
    How to Dual Boot Windows 8 with Windows 7
    Adding a Windows 7 Entry
    Hope this helps.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Dual Boot, Windows doesn't boot.

    Hi there,
    Firstly, I'd like to apologize in advance if this has already been answered somewhere, but I couldn't seem to find it anywhere.
    Yesterday, I tried to dual boot Windows 7 on my iMac with the latest version of Lion. I used Bootcamp and everything went according to plan untill I had to install Windows. My Mac restarted and began to install Windows, but after a while of installing, the disc stopped running and everytime I heard it trying to get back running, it was stopped by a weird noise, as if something was grinding onto it.
    This kept going for a minute or two, when I decided to turn it off, since nothing was happening. After that, I started my Mac again and after a white screen, the only thing it shows is a black screen with a little type cursor in the upper left corner. I've tried to reboot it many times but I can't do anything, if I take the disc out, the only thing I get is a white screen, it doesn't go back to the normal Apple logo.
    If anyone has some tips on where i should go with this, it'd be greatly appreciated!

    You need to delete the boot camp partition and start over. Use Book Camp Utility or Disk Utility to remove the partition.
    What happened is when you installed Windows and it did not finish installing the OS and will keep trying to boot to that partition and finish. Until the OS install is finished the Mac is flagged to boot automatically to that partition. This is why you are seeing the black screen.

  • How to best partition the HDD for dual boot: Windows 8 & Linux

    Hi,
    I'm a newbie in Windows 8, linux, Partition....
    I would like to use my new laptop with windows 8 pre-installed to the following:
    Create a Dual Boot Windows 8 / Ubuntu
    Create on my C drive (unique drive on my laptop):
    *a partition for the system
    *one for Windows 8
    *one for Data and
    *last one for Ubuntu OS
    My aim is :
    -to install VmWare on Windows 8 and run Checkpoint Splat with virtual machines to perform CCSA labs.
    to install GNS3 on Ubuntu for CCNP labs but with GNS3 accessing files in the Data partition
    I have a Toshiba Satellite with 750Gb and 8 Go RAM.
    According to you what's the best size for my partitions?
    Is there a better way to partition my C drive regarding my aim?
    Best Regards
    ***I don't know if it's the right section, sorry for that. Feel free to move this thread in the appropriate section***

    Hi,
    Thank you all,
    Isn't it too much 200G for Windows as i will on ly install VMWARE Workstation 9 for lab purposes and possibly a few softwares.
    VMWARE installed on Windows will require 2 GB + 1 GB per host (i will use approximatively 15 hosts).
    Checkpoint products will be installed on VMWARE that is installed in Windows :
    - disk space needed for 3 Checkpoint gateways: 3*37 GB
    - disk space needed for 2 Checkpoint gateways management servers: 2*10 GB
    On Linux I'll install GNS3 with 10 GB disk space required and a few softwares.
    I've got a Toshiba stellite computer with Windows 8 pre-installed.
    Processor: Intel(R) Core(TM) i5-3210M CPU @2.5 Ghz
    RAM: 8 Go
    64 bits OS, processor x64
    See below the screenshot
    I've taken screenshot of my partition (below).
    * Don't take into account the disk 1 (E) partition
    Can u confirm that in Disk o, partitions with 450 Mo, 260 Mo and 9.48 Go are for recovery system?
    I am planning to let the recovery partition as it is and divide the TI30985500A (C) partition (688 Gb) into:
    - 200 Gb windows partition
    -100 Gb Linux partition
    -388 Gb data partition
    What do you think about this partionning regarding the informations i've provided above?
    Greets

  • Is there any possible way I can dual boot Windows with OSX 10.7.2 on a MacBook Pro 15' from 2006?

    Hello,
    I am new to this forums.
    I have searched about dual boot win/mac, but couldn't find a clear answer, so I decided to post this now.
    I run a MacBook Pro 15' from 2006 (Intel based) and have upgraded it to OSX 10.7.2 Lion.
    I have tried to install windows 7 on a small (20GB) partition by using Bootcamp, but then I've received a notice saying that there was no windows support software available. However, I did install Windows 7 Professional by unchecking that box. After the installation I have downloaded the windows support software and tried to install it but then I've received a notice saying that I can't install it on this machine.
    Could you please give me any suggestions on how to dual boot win/mac, if it is possible at all using this machine? And how to safely go back to where I was before (with a single mac OSX 10.7.2 partition)?
    Thanks.

    This problem has been solved as I just needed to download Boot Camp 4.
    Can I delete this post?

Maybe you are looking for