How to dual boot with Windows 8.1 and Arch?

Hello everyone,
I've been looking into using Linux as my daily driver since having some experience with it on a server. After some digging around, I think Arch Linux is the best distro for me, now onto where I am.
I'm currently running Windows 8.1 (updated from Windows 8, which updated from Windows 7) on a Dell Inspiron 15R SE laptop, I want to dual boot Arch Linux with it. I've looked at the wiki and I'm still not entirely sure what to do.
Can anyone give me a quick list of steps of what to do to dual boot this? I've dual booted Ubuntu in the past and it was really simple because an installer did it all.
Thanks, Expi.

stqn wrote:
Expi1 wrote:Thanks, I'm mostly struggling with how to partition for Arch and then how to do the bootloader. I'm using Win8 64-bit and from what I understand a Legacy BIOS bootloader. I'm not entirely sure what I should be partitioning the C: into, I've done partitions before, just not for Arch and then I'm not sure whether to use GRUB or syslinux, or if I even need those. Or if I need to use GPT or MBR?
Your disk is already partitionned so you don’t have to choose between GPT or MBR, the choice is already made.
You don’t partition “C:”, that is the name of a Windows partition. You partition a drive.
Grub or syslinux, use whatever the beginners guide tells you to. Personally I think syslinux is simpler which is why I’m using it (but I’m not dual-booting, if that matters).
You’re not saying what your problem is with partitionning, so it’s hard to help.
Thanks for getting back to me, I'm not sure if I just create one large partition for Archlinux or if I have to create multiple? Where I'm also confused is with the Creating Filesystems part of the guide. I don't understand how I'd do this in Windows, or what /dev/sda1 is referring to.
As for the bootloader part, the Beginner's Guide gives you a choice between syslinux and grub, what I'm not sure about is which to use considering I'm dualbooting. How it will affect my windows bootloader, do I disregard that and use GRUB now? I'm unclear on how that works.
I'm also aware I need to disable Secure Boot, I just searched my BIOS options and couldn't find anything remotely relating to that, so I'm assuming it's not an issue since this computer was originally on Windows 7 anyway?
Thanks again, Expi.
Last edited by Expi1 (2014-03-06 19:54:30)

Similar Messages

Dual Boot with Windows ME

i am very new to all this stuff. Can someone please guide me on how to go about installing Unix so that it also dual boots with windows ME.
i am planning on doing some unix work..and installing oracle and learning oracle in the bargain at home. do u think this is the best way to go. any suggestions/guidance is appreciated.
many many thanks

I'd consider buying a second, inexpensive PC for Solaris. You can get a $20 mechanical switch that will let you share a single monitor. If two keyboards and mice are inconvenient, you can buy a KVM (keyboard-video-mouse) switch. If you just want to hack around, it's much more convenient to have two PCs. (IMHO)

Arch does not show up in Grub when dual booting with windows 8

I just installed Arch linux, dual booting with windows 8 using the beginners guide[https://wiki.archlinux.org/index.php/Beginners'_Guide] itself. Now Grub is installed and i can only find Windows 8 and I cannot find Arch. Is there a way I can find if arch linux has been installed and show up in Grub.
Sorry, I am a newbie, but i chose to post this topic here and not newbie corner as it is installation related.
My windows 8 is installed on /dev/sda1 with ntfs partition type. Arch Linux is installed on /dev/sda6 and it is ext4 partition. I dont know if this info helps. I am using Thinkpad R61
Last edited by sutro_droid (2013-03-06 00:30:48)

ivokosir wrote:It may be that you didn't install os-prober before running grub-mkconfig. This happened to me once, I hope I'm not too late to warn you.
I am sorry, yes you are too late. I have wiped windows 8 and performed clean install. No regrets. And as a matter of fact, I did grub-config and then installed os-prober. That could be the problem. Thanks. I will try this again another time.

[SOLVED] RTC and dual booting with Windows 8/8.1

I am planning ahead of installing Arch on a windows 8.1 laptop, and need to understand whether or not the known Windows registry hack to get windows to use UTC for the RTC is still valid for Windows 8/8.1? I have been searching via google and the usual sources of information, but it is not clear to me if there are problems doing this, specifically if arch is dual booted with Windows 8/8.1 rather than older versions of the MS OS. Certainly I have used the technique without any problem in the past when dual booting Windows XP with Arch on several different machines.
Does anyone have personal experience with doing this on a Windows 8 or 8.1 machine and can report here on whether it works successfully or not?
Thanks for any advice.
Last edited by mcloaked (2014-02-11 21:16:21)

Since there were no replies at this point I thought I would just go ahead and implement the registry hack on the Windows 8.1 O/S in the laptop and see if Windows behaves. It appears to be OK, with the displayed time being correct after reboot, and time synchronisation remaining fine with no problems seen in the displayed time, although I won't be able to read the RTC directly until I have completed the Arch install in the coming week or two. I now don't foresee any issues with the time synchronisation between booting Arch and Windows 8.1 so I will mark this as solved.
Since the RTC is now in UTC then normal clock config in Arch using chrony should perform normally once the install is done and the new system set up.
Last edited by mcloaked (2014-02-11 21:17:11)

Dual Booting with Windows 8 and 7 Pro in a G6 - 2235us Notebook

I have a G6 - 2235us Notebook 64 bit that came with Windows 8.0 installed.
I would like to install Windows 7 Pro and make it dual book with Windows 8.0 with 7 as the default to start.
Would you please give me steps as to how to proceed and also the drivers, etc I would need to download.
Thank you.
This question was solved.
View Solution.

Thank you Paul. I understad I just have one more question:
I found this page that gives info about dual booting:
http://www.pagestart.com/win8dbwin701181301.html
From your expertise, would you say the steps suggested on that
page could succeed for making Win 8 and 7 dual boot in this particular machine?

When dual-booting with Windows 7, Mac OSX time settings reset every reboot.

I have recently installed Windows 7 Professional on my mid 2010 MacBook Pro via BootCamp (Running Mavericks BTW). Everything runs grean and have not experienced any problems on the Windows side, but I have a problem with Mac OSX now. When I am using Windows 7, and I reboot into Mac OSX, I find that my time settings are wrong. It seems like my time zone has changed, because the date is correct, as well as the minutes, but the hour is always wrong. When I go to Date & Time in System Preferences, and my time zone is correct, but I still have to chage the hour in the time. Any ideas as to why this is happening and how to stop it would be greatly appreciated.

If you dual boot your Windows PC with OS X or Linux, you may have experienced a problem in which your clocks reset themselves incorrectly every time you boot into Windows. Here's a simple registry edit to fix that.
Essentially, the incorrect clock setting happens because OS X and Linux use GMT time while Windows tries to synchronize with your local time zone, getting confused when you reboot between the two. Apple's own Boot Camp drivers for Windows are supposed to fix this problem, though some users have noticed that it still happens even with the drivers installed, and some Linux users are left out in the cold. Furthermore, if you have a Hackintosh, you can't install the Boot Camp drivers, so you'll need to find another way around the problem.
To fix it, just hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
Lastly, reboot into OS X, then reboot back into Windows. You should now notice that your clock actually displays the correct time.

HP Envy 700-430qe DT CTO - - - Trying to dual boot with Windows 7

HELP HELP HELP
I know how to set up double boot for several different HP computers, based mostly from what I have learned in this great forum, but this one has me stumped.
I have been trying to install Windows 7 on this computer to double boot with Windows 8.1. I have tried to set the bios up correctly, enabled legacy, disabled secure boot, disabled fast boot. I booted under UEFI to get in to GPT mode, still no luck at all.
The installation always goes all the way through the first 4 steps and through most of the 5th. After the reboot in the 5th step, it stops and can not go any further. A message appears without any error code.
I think it may be a problem in this computers UEIF settings, but I do not know if anymore of them to try.
I can use all the help you all can offer.
Thank, Brad
PS, If we ever get this to work, then I will have to ask you where to find drivers for this model, if they exist!

Hi Brad,
According to the information that you posted you have a W8 delivered PC.
If the graphics card in your PC can run in legacy mode then you should be OK.
I suggest that you use a separate HP for W7 as you will probably run into partition placement issues when you try to install W7 to the same HD. Installation to the same HD is not impossible but you will have to remove some partitions such as the recovery partition and then resize the "C" partition to make room for W7. You should be able to use Disk Management to delete partitions and resize the "C" partition.
Be sure to create the external HP recovery media as it will be needed. Backup your data to separate external media.You should also consider installing the HP diagnostics to an external flash drive.
Boot in the BIOS and set the BIOS to legacy mode and fast boot off. Save the changes on exit.
Now boot up the external recovery media (don't select the EFI media if shown) and reload your PC with W8.
If your PC boots up and runs OK then you should be good to load W7.
If you are using a separate HD for W7 then unplug the original HD. If you don't then W7 will install a boot manager to the primary HD.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Can I dual boot with MAC OS/X and Windows

What is the best way to configure a dual boot on my MAC Bookpro laptop? Also, can I dual boot Windows 8 and MAC OS?

The first alternative is a dual-boot arrangement between OS X and Windows provided with OS X.
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
   1. Install the Apple Boot Camp software. Purchase Windows
         XP w/Service Pak2, Vista, or Windows 7. For Boot Camp
         4.0 and above you can only use Windows 7 or later. Follow
         instructions in the Boot Camp documentation on
         installation of Boot Camp, creating Driver CD, and
         installing Windows. Boot Camp enables you to boot the
         computer into OS X or Windows.
     2. Parallels Desktop for Mac and Windows XP, Vista Business,
         Vista Ultimate, or Windows 7. Parallels is software
         virtualization that enables running Windows concurrently
         with OS X.
     3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
         or Windows 7. VM Fusion is software virtualization that
         enables running Windows concurrently with OS X.
     4. CrossOver which enables running many Windows
         applications without having to install Windows. The
         Windows applications can run concurrently with OS X.
     5. VirtualBox is an Open Source freeware virtual machine such
         as VM Fusion and Parallels that was developed by Solaris.
         It is not as fully developed for the Mac as Parallels and VM
         Fusion.
Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Dual Booting with Windows Off of Different Hard Drives

Hi,
Been reading the guides but I'm still struggling with this.
I have this set up
SSD1 - Windows 7 (includes windows boot)
HDD1 - Windows Files (NTFS)
HDD2 - Arch Linux
When I installed, Arch, I unplugged the windows drives.
I partitioned arch as following (from fdisk -l)
sda1 /boot
sda2 /
sda3 swap
sda4 Extended
sda5 /var
sda6 /home
my menu.lst file looks like this
# (0) Arch Linux
title Arch Linux X11
root (hd0,0)
kernel /vmlinuz-linux root=/dev/sda2 ro 5
initrd /initramfs-linux.img
# (1) Arch Linux Multi-User
title Arch Linux Multi-User
root (hd0,0)
kernal /vmlinuz-linux root=/dev/sda2 ro 3
initrd /initramfs-linux.img
# (2) Arch Linux
title Arch Linux Fallback
root (hd0,0)
kernel /vmlinuz-linux root=/dev/sda2 ro
initrd /initramfs-linux-fallback.img
After I reconnect the windows drives, i set the boot drive in the bios to HDD2. It boots to grub, but now booting the options fails. i tried changing (hd0,0) to hd1 and hd2 but it fails to do anything, so i assume (hd0,0) is correct. Booting as is puts me into the recovery shell. I tried changing the root=/dev/sda2 to root=/dev/sdb2 thinking it might work, and while it booted, it said it could not find the file system and asked for the root password for maintenance mode. I'm having a hard time discerning which hard drive is which and what the partitions are called once I added the extra disks. Is there some way to determine this? I noticed I couldn't use fdisk in the recovery shell.
Many Thanks.

This is precisely the reason to use UUID, or even better labels, instead of actual device names which might change depending on the order in which your system "discovers" the disks.
Here's what I would have done:
1) Connect all three drives and boot into a LiveCD
2) Run blkid to get UUID for each partition (might be useful if labels fail for whatever reason). This will also show you the currently assigned labels, if any, for the partitions
3) Use e2label to set label for ext{2,3,4} and ntfslabel for NTFS partitions. (Both use slightly different syntax, so be sure to check manpages before proceeding)
4) In menu.lst, replace all occurences of
root=/dev/sdxy
with
root=LABEL=arch
, assuming you set the label for your / partition as "arch"
5) In menu.lst, replace all occurences of
root (hdx,y)
with
label boot
, assuming you set the label of your /boot partition as "boot"
6) In /etc/fstab, replace all occurences of
/dev/sdxy
with
LABEL=<insert corresponding label here>
7) Profit!!!

How to sync icloud with windows 8.1 and ipad 4

How do I sync Icloud with Windows 8.1 and Ipad4?

Hi gemret,
Welcome to the Apple Support Community!
To be able to sync your information across your Apple devices and your Windows computer, you will need the iCloud for Windows 4.0 control panel. Please use the following Apple link for information and download link for the control panel.
iCloud for Windows
Cheers,
Joe

How do i set up a dual boot with windows

I am trying to set up a dual boot system with both the snow leapard and win 7, I have partioned the drive and have windows booting up. How do I get the drivers for the machine that windows will recognize. I am researching this for my dad his I mac is one of the new 21 inch models.

If you want dual boot you would use Boot Camp which is built into Snow Leopard. You will need a license of WIndows 7. You can install it by using Boot Camp Assistant however prior to doing so you probably should look at how it's correctly done, here is a You Tube Boot Camp instructions video I would recommend you watch first.
If your dad wants to run Windows 7 & OS X simultaneously then he will need either Parallels or VMWare Fusion. Both are virtualization applications that allow one to run Windows and OS X side by side. This is a great solution unless he is a gamer or needs to run graphics intensive applications like CAD/CAM or 3D Games or anything that is 3D intensive. For all other types of applications virtualization is an excellent solution.
If you choose the Boot Camp solution there is a forum specifically for that which is where I'd recommend posting questions.
Roger

Windows 7 already installed.. how to dual boot with archlinux?

Hi, I have already windows 7 installed on my laptop and as I want to start with arch linux, I now want to dual boot. I want both OS on the same SSD. I could install archlinux on my 2nd hdd but that would be a performance loss compared to an installation my my SSD. As my windows partition already has a fixed size (the fully 79gb or my 80gb SSD), how can i get archlinux on it? Also, can i simply delete archlinux later and windows 7 will work just fine?
Thanks

Deemoney14 wrote:
Stephanie wrote:If you let GRUB override the Windows bootloader during install you will have to reinstal it if you delete Linux and need the Windows bootloader again.
You just need to restore the bootloader to the MBR, which is easily done with tools like Super Grub Disk.
Its easier than that, boot off a Windows XP install CD, go into recovery mode and type "fixmbr" and it will be back to normal
To get it working op, you will need to make room on the disk for Arch (shrink your Winxp partition), install Arch onto the spare disk and then tell Grub where your XP is located (theres normally a commented out option at the end of /boot/grub/menu.lst anyway).

I have a dual boot with Ubuntu 10.10 and Windows 7, with linked profiles. When I upgraded to 4.0, my tabs and settings would show in Windows, but not Ubuntu. How do I fix this?

This worked when I first installed and booted in Ubuntu. When I booted in windows, my tabs which were open in Ubuntu opened in Wndows. But, when I booted back into Ubuntu, all of my tabs and pinned tabs were gone, as well as the firefox button. My bookmarks and firefox background remained, but none of my tab settings.

Norton is due to release a patch for both IE9 and Firefox 4 in May. See [http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-compatibility-with-IE9-and-FF4/td-p/420020 Norton compatibility with IE9 and FF4]
To revert to 3.6.16, do the following.
* Go to [http://www.mozilla.com/en-US/firefox/all-older.html Download Firefox v3.6.16] and download it to the desktop.
* Then go to Add/Remove Programs, scroll down to Mozilla Firefox and remove it, choosing to keep your bookmarks, customizations etc., (don't checkmark the box).
* Then reboot and delete the folder called Mozilla Firefox at this location: C:\Program Files\Mozilla Firefox
* Finally run the installation file you downloaded.
Actually, Firefox 4 does have a means of identifying untrusted sites. See [[Site Identity Button]]

Dual Boot with Windows Vista

Hi
I am a complete n00b with Mac. The director at my company requested me to set up her MacBook (running Mac OSX 10.4.11) to dualboot with Windows Vista 32 bit. I have been searching Google and I cannot find anything.
Can someone please run me through what I'll need and how exactly to do it?
Thank you in advance

Hi and Welcome to Apple Discussions...
Check out the BootCamp set up guide before installing Windows on a Mac.
http://manuals.info.apple.com/en/bootcampinstall-setup.pdf
As Kurt mentions... you must be running Leopard 10.5.x to do this.
And more information here. http://lifehacker.com/software/geek-to-live/virtualize-and-dual+boot-the-same-wi ndows-on-your-mac-267905.php
Carolyn

Trying to create dual boot with Windows 7 on Yoga 11s

I was trying to install Windows 2008 server (I said Windows 7 in the title because it's essentially the same) on a Yoga 11s in dual boot configuration with the factory-installed Windows 8 upgraded to 8.1, and as expected it's a pain in the butt.
I ran into the catch-22 that you can only boot from a USB external optical drive in legacy mode, and then Windows refuses to install on a GPT-type partition. Dead end there.
As plan B, I tried installing from my MSDN DVD from within Windows 8.1. It chugged along for a while, but then hung after the second restart. It reached a state where the machine is dual boot, and goes into Windows 8.1 OK, but 2008 server hangs on startup even in safe mode. Probably it's a driver problem. I downloaded all Windows 7 drivers for the Yoga 11s from the Lenovo website, and they would work fine for 2008 server if there was a way to put them in place.
I have been through the process twice before on previous machines. After getting the server OS to install, none of the devices work well or at all, but I could patiently install the drivers using device manager. This is the first time where I can't get the server OS to install to a bootable condition. Is it hopless, or might there be documentation somewhere about how I could manually place drivers in the right folders to enable the OS to start?
Plan C might be to follow Lenovo's instructions to create a UEFI bootable USB flash drive and try to install from that. Would that work better than installing from within Windows 8.1, or just reach the same roadblock?

Reformat that new drive with SL DVD.
Go into SL DVD again, go to Utility Menu and choose DU.
Then try repairing the drive or better yet, just erase the drive (not the volume) and try again.
There are enough changes between Tiger partition scheme and SL that you would want to. RAID arrays built with Leopard will not allow installing SL, they have to be recreated (and can then have Leopard and SL).
Go

How to dual boot with Windows 8.1 and Arch?

Similar Messages

Maybe you are looking for