How to duplicate a project with a different fps

I have created a FCPX project with a frame rate that does not work well with the frame rate in the events I have taken clips from.  I see that I cannot change the frame rate in this project.  Can I copy the events on the timeline in this project to a new one with the correct frame rate?

I just couldn't believe it would be that easy!!  I tried it and, as you say....  It worked very well!!
Thank you for your good advice. 
You certainly solved my problem!!

Similar Messages

  • How to duplicate Events/Projects with only Proxies.

    I'm on a MBP Retina, with 500GB SSD. Running Mountain Lion and FCPX 10.0.5.
    I have a 3TB Seagate drive.
    I encoded all my footage to ProRes 422 first, then imported that as original media into my current Project. That footage is over 1TB in disk space.
    I then created Proxies of all that, and am pleased at the performance, and file size of the proxies.
    Now I want to copy my Event/Project to a smaller drive that only has 400 GB available (I measured my Proxies footage folder and it's only over 100GB. So plenty of space).
    I've viewed tutorials on the dangers of duplicating in the Finder, and that everything must be duplicated or copied within FCPX.
    So my question: How can I take my current Event/Project and Proxy versions only, and go home and edit, and then come back to the office and move my updated Project file and relink and keep moving with my bigger versions stored on my 3TB drive? What's the step-by-step?
    Thanks,
    Chris.

    Here is a possible way to go about this:
    Duplicate (or move) all projects to the backup drive. Duplicate the event to the backup drive.
    Click on each copied project from the backup drive (you don't need to open its timeline), go to the Inspector and click on "Modify Event References". There you will get a list with two events (the one on the original disk and the copy you just made). Move the new copy to the top an click ok. Now your projects will reference the versions of your clips in the copied event, and you can safely delete the originals.

  • IDE - eclipse. How to duplicate a project

    hi guys,
    I'm not sure this is the right place to post this message but i wonder if anyone knows how to duplicate a project in eclipse (with a diff name of course).
    thansk
    peter

    might not be the best way of doing things, but i create a new project and import a file system which contains the old code throught
    File --> Import --> File System.

  • How to share a project with a non-Adobe user and present it to prospect customers?

    I Have to share my project with a person who will present it to prospect customers. I cannot ask this person to open an Adobe account. Is there a way for him to access my DPS folio and show it? Or can I export it in a way that allows to appreciate the interaction features built inside?
    Thanks!

    OK, got it. Thank you!
    2015-01-17 14:46 GMT+01:00 Bob Levine <[email protected]>:
        How to share a project with a non-Adobe user and present it to
    prospect customers?  created by Bob Levine
    <https://forums.adobe.com/people/BobLevine> in Digital Publishing Suite
    - View the full discussion
    <https://forums.adobe.com/message/7105349#7105349>

  • How to sign into imessage with a different apple ID

    How to sign into imessage with a different apple ID

    Why are you posting the same question in a separate thread. You have already been provided an answer.
    GB

  • How to install mountain lion with a different apple ID?

    How to install mountain lion with a different apple ID?

    More information would be helpful. If you are going to use a different Apple ID, you will need to buy Mountain Lion again. If you have a computer that has Mountain Lion installed, but Mountain Lion was purchased with a different Apple ID you must use the original Apple ID to download Mountain Lion.
    Help us help You
    I need to learn to type faster.

  • Stabilization for the project with the different video settings

    If i open project with the settings for 1080p video and then add to it 720p video, how can i make stabilization for it? (When i open another video with the different sequence settings it does not allow me to make stabilization)
    Is there any way of working in one sequence with the different settings of the video?

    Footage that does not match the sequence setting nest first then add the Warp.

  • How do I make purchases with a different email?

    I have been wondering about this for quite some time now: How do I make an purchases, whether they are for apps or in-app purposes, with a different email?
    I am currently using an iPhone 4 that was given to me by my sister's ex-boyfriend about 2 years ago, and I have been using his Apple account and password to download apps and such. But I don't know how to buy something in the App Store or make an in-app purchase because it requires information/ security questions from my sister's ex-boyfriend's account, which neither my sister or I know, and her ex-boyfriend is long gone by now, so we cannot contact him anymore. So I made my own Apple account and tried to make a purchase from there, but I still needed to answer security questions from my sister's ex-boyfriend's account, which bugged me. I have been thinking that this is the case because I downloaded the apps off his account, and curious if the problem would be fixed if I resetted my iPhone entirely or deleted all the apps that I downloaded with his account, and then re-downloaded them on my new account. The only problem is that, I don't want to lose my progress with any of the apps that I am using currently, and even if I saved them on the Cloud, I would still need to use his account information to bring them back, which I don't want. Also, I have an app that lets me purchase apps from the App Store with points, and I don't want to lose those apps either or else my points would come to waste. So, is it possible for me to use an account different from my previous one, since I don't know its security answers, to make purchases, and without worrying about losing any paid apps and app progress I might have? This really bugs me. Thank you in advance.

    Sorry you're going to lose the progress of all your apps,
    settings - app/iTunes store - sign out and then sign in with your apple id.
    Delete all the apps under his and then download it with your apple id.

  • How Can I do it with to different ipod on the same computer ?

    I have and ipod(1GB) and my daughter has another ipod(4GB), how can we work with the same computer and itune for 2 different ipods ?
    iPod(1GB) and a second iPod(4GB)   Windows XP   2 different iPods on the same computer

    this document might be of some help with that:
    How to use multiple iPods with one computer
    if you decide on a multiple-user-account strategy, this document might also be useful:
    iTunes: How to share music between different accounts on a single computer

  • How to create an infocube with a different time reference characteristics

    I need to create a similiar cube with a different time characteristic.
    When I copy from inventory cube, the time reference characteristic is 0CALDAY. I tried to change it but not possible,
    How then can I create a similiar cube with 0CALMONTH as the reference time characteristics?
    Thanks
    bye

    Hi Colin,
    If you want your time reference characteristic to be 0CALMONTH, then you must ensure that all other time characteristics in the cube can be derived from this characteristic. the infocube by default chooses the most refined time charactersistics as its time reference characteristic.
    That is in the cube you could then have characteristics lik 0CALQUARTER, 0CALYEAR...You cannot have 0CALWEEK or 0CALDAY since these cannot be defined from a value in 0CALMONTH.
    Please check below the SAP help for your reference.
    http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
    Hope it helps,
    Best regards,
    Sunmit.

  • Is it possible to publish a project with a different resolution than the native project resolution?

    I think I know what the answer is going to be here, but I'm going to ask anyway. The background here is that I've made a few demo videos for new products and features my company is working on. I'm using CP4 for this. Our marketing department wants to take AVIs of my demos and insert them into their Powerpoint demonstrations. However, the native resolution of our demos doesn't make for a graceful import into Powerpoint. Thus, I've been directed to provide smaller res AVI files.
    Thus, I am wondering if you can publish a project at a different resolution than the one in which it was recorded. My initial poking around seems to indicate that the answer is "no," and if this is truly the case, I will be rumbling over to the "Suggest a Feature" forum soon. There does seem to be a kind-of-workaround in that you can change the resolution of the project before publishing it, but this is something that cannot be undone, meaning that in order to do this, I will have to save new, smaller versions of all my projects. This is a bit ungainly.
    So, if anyone knows a good trick here, I would love to hear it!

    Unfortunately, I don't know what you mean when you say "manual panning." And I'm really not sure what you mean when you say the fields are not fully visible in the original image; they are completely visible. Here's a close-up from the original slide:
    As you can see, the fields are completely visible.
    Also, the slide is not entirely static. For the slide I chose as an example, the Password is filled in before the mouse moves. This typing may be part of what is getting Captivate confused; note this sequence from the resized version of the project:
    Slide 35:
    The login window first appears. Everything is normal. During this slide, the mouse moves and clicks inside the User ID field, leading to...
    Slide 36:
    At this point, things begin to go awry. The user name is entered, and the cursor moves to the Password field.
    Slide 37:
    Whoops! As soon as we click Login, everything goes back to normal.
    Slide 38:
    I will try a few of the suggestions you offered, and will report back with the results.

  • One project with two different web services styles (JAX-RPC and JAX-WS)

    Hi theres,
    how come the same project doesn't support two different web services styles?
    First time I create a web service proxy using the wizard, the second step is to choose between JAX-RPC and JAX-WS. After that, this step is removed from the wizard and all subsquent web services are assumed to be the same style as the first one.
    Can someone explain me why?
    thanks in advance,
    Manuel Leiria

    Hi,
    yes, I think to remember that there is support for a single style only. If you need another one too then you create a new project.
    Frank

  • How to archive a project with files

    Ok the job is done and now i would like to move the project with files from my laptop to a backup hard disk.
    I saw that in project manager there is a tool to do that, but what if i already have the video files already copied to the external drive and i just want to backup the missing parts ? ( project files, previews) and how to keep files location updated with new location?
    Thanks

    ok I just did it, I also moved the preview files in a new folder inside the customer folder and pointed it when launching the copied project file and it works.
    So it's all manual or a new clean full copy with project manager.. I wish there was an option that backup in the destination harddrive just the missing files but I can just do it manually.
    Thanks!

  • I am using Windows 8 with iTunes.  How do I manage iTunes with two different Windows User Accounts?

    I have recently bought a laptop running Windows 8 and downloaded iTunes.  I subscribe to iTunes Match and have a large amount of purchased music and imported CDs, along with some films purchased from iTunes.
    I have downloaded all of the music and the films to the laptop using iTunes Match when logged in under my User Account in Windows 8.  However, when we switch to my girlfriend's User Account, she can load up iTunes but all the music and films have the cloud symbol on them indicating that they need to be downloaded
    Is is necessary to download everything to the computer twice (I can't really believe this is the answer) or are we missing something in terms of using iTunes with two different User Accounts?
    Thank you.

    Step 1
    Create a new user account on your device. For Mac users, choose “System Preferences” from the Apple Menu and navigate to the “View” menu. Click on “Accounts” and select the “+” button to add a new user account to your machine. Edit the user information and grant any relevant privileges by following the on-screen prompts.
    For Windows users, click on the Windows "Start" button, select “Control Panel” and choose “Add or Remove User Accounts.” A new window will open. Click “Create a New Account.” Name the account and set any relevant privileges by following the on-screen prompts.
    Step 2
    Sign in to the new user account you created.
    Step 3
    Open iTunes and click “Sign in.” Enter your Apple ID and password and log in.
    Step 4
    Download purchases through the iTunes store. All files related to these purchases are stored under the separate user account, thus separating both iTunes accounts and their libraries on the same computer.
    Step 5
    You can share music from both libraries by dragging your music library to a publicly accessible location on your computer. Click “Preferences” from the iTunes menu and deselect “Copy files to iTunes Media Library when adding to library file.” Add the shared folder to your library from the “File” menu.
    Tip
    Create more than one library from the same user account by deselecting “Copy files to iTunes Media Library when adding to library file” from the “Preferences” menu. Add the files you want to iTunes by dragging and dropping or by opening from the “File” menu and sync your device to that library. Quit iTunes after the sync and reopen iTunes while holding the "Shift" key in Windows or the "Option" key on a Mac.
    (tour du lịch nước ngoài)

  • How to use maven project with fusion web application

    hi i have seen the tutoriel of oracle on how to use maven 2 with jdevelopper ,
    but how to integrate it on a fusion web application ???
    Edited by: 922454 on 9 avr. 2012 04:39

    If you have not managed to help yourself out with maven for ADF here is a quick workaround you can try. Invoke ant's ojdeploy task from maven. Refer step-by-step guide here.
    http://maveninjdeveloper.blogspot.in/2012/04/handle-adf-application-maven-ant.html

Maybe you are looking for