How to DVR a program in the future?

How dos one DVR a program in the future? Say a program that airs three days from now?

You can do a search, or just find it in the guide and hit record.

Similar Messages

Ordered prints. Several were cut off at edges or were printed off center. How do I prevent this in the future?

Ordered prints from my Mac library to Apple. Several came back cut off or printed off-center. How do I prevent this in the future?

How do I prevent this in the future?
Before ordering any print product proof it by creating a PDF file of it according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Save the PDF file to compare with the printed copy when it arrives.
For this book contact Apple via the 800-275-2273 phone number. Apple has been very good a correcting problems. They gave me a refund so I could order again.

I have lost iTunes on my phone and sent it in for repair, how do I prevent this in the future?

I needed to reactivate my iTunes on my phone, needed to send in for repair. How can I prevent this in the future?

You may have transferred all your songs, but your iPad is seeing the library as a different entity.
The following article(s) may help you.
Moving your iTunes library to a new computer

How to get deleted programs in the start menu?

Hi,
I foolishly deleted (by accident) my all programs folder on the start menu.
This has emptied the programs folder on the start menu through windows explorer as well.
I still have access to all of my programs by searching for them or by going through program files. How can I rebuild my start menu back to the original WITHOUT reinstalling windows or anything like that.
Unfortunatly, I can't do a restore because it is set to do a clean up of all old restore points, and it did this about 5 minutes before the problem occured.
PLEASE HELP ME!!!
Tom

Hi,
Is there any way of getting all of the links back without having to do them manually.
There must be a way of restoring or forcing the computer to research for all of the installed programs on the "Vista C" drive. I have tried going through the RegEdit but that hasn't helped at all. The CMD code that I got off another forum doesn't work either.
Thanks for your reply though
Tom

How to calculate a date in the future and set it as field value?

I'm trying to set the value of a read-only field to a date and time 72 hours from the current date and time. Here's how I'm doing it now:
var futureInMilliseconds = new Date().getTime() + 259200000; // current date and time + 72 hours in milliseconds
field.value = new Date(futureInMilliseconds);
The field is formatted as "m/d/yyyy h:MM tt". When I test this in the debugger I see it listing the correct date and time in the future, but the value applied to the field is always the current date and time. So, I'm having a difficult time getting this to work for something that should be fairly straight forward and simple. I'd appreciate any suggestions.

What is the "field" object?
What happen when you use "event" for the object and not "field"?
Even if this script is placed at the document level or any other location, it is still a calculation. It just not a field Custom Calculation Script. You are adding one value to another to get a new value.

How to run Struts program with the help of tomcat

Hello Everybody
This is Adesh.I am a newcomer of java and facing a problem with struts, so if any one know how to set the path of struts and how to run struts program, so plz inform me.
THX in Advance.............................................

struts-config.xml
<struts-config>
<action-mappings>
 <action path = "/welcome"
 type = "Welcome"
 scope="session">
 <forward name="success" path=".welcome"/>
 <forward name="failure" path=".base.error"/>
 </action>
</action-mappings>
 <plug-in className="org.apache.struts.tiles.TilesPlugin">
 <set-property property="definitions-config" value="/WEB-INF/tiles-defs.xml"/>
 <set-property property="definitions-debug" value="1"/>
 <set-property property="definitions-parser-details" value="0"/>
 <set-property property="definitions-parser-validate" value="true"/>
 </plug-in>
</struts-config>tiles-defs.xml
<tiles-definitions>
 <definition name = ".base" path = "/include/template.jsp">
 <put name = "title" value = "${title}"/>
 <put name = "header" value = "/include/top.jsp"/>
 <put name = "body" value = "${body}"/>
 <put name = "footer" value = "/include/footer.jsp"/>
 </definition>
</tiles-definitions>web.xml
<servlet>
 <servlet-name>action</servlet-name>
 <servlet-class>org.apache.struts.action.ActionServlet</servlet-class>
 <init-param>
 <param-name>config</param-name>
 <param-value>/WEB-INF/struts-config.xml</param-value>
 </init-param>
<init-param>
 <param-name>definitions-config</param-name>
 <param-value>/WEB-INF/tiles-defs.xml</param-value>
 </init-param>
 <load-on-startup>1</load-on-startup>
 </servlet>
<servlet>
 <servlet-name>init</servlet-name>
 <servlet-class>Init</servlet-class>
 <load-on-startup>2</load-on-startup>
 </servlet>
 <servlet-mapping>
 <servlet-name>action</servlet-name>
 <url-pattern>*.do</url-pattern>
 </servlet-mapping>
<jsp-config>
 <taglib>
 <taglib-uri>/WEB-INF/struts-bean.tld</taglib-uri>
 <taglib-location>/WEB-INF/struts-bean.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/struts-html.tld</taglib-uri>
 <taglib-location>/WEB-INF/struts-html.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/struts-logic.tld</taglib-uri>
 <taglib-location>/WEB-INF/struts-logic.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/wall.tld</taglib-uri>
 <taglib-location>/WEB-INF/wall.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/c.tld</taglib-uri>
 <taglib-location>/WEB-INF/c.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/fn.tld</taglib-uri>
 <taglib-location>/WEB-INF/fn.tld</taglib-location>
 </taglib>
 <taglib>
 <taglib-uri>/WEB-INF/fmt.tld</taglib-uri>
 <taglib-location>/WEB-INF/fmt.tld</taglib-location>
 </taglib>
</jsp-config>
 <resource-ref>
 <description>DB Connection</description>
 <res-ref-name>jdbc/SQLServerDB</res-ref-name>
 <res-type>javax.sql.DataSource</res-type>
 <res-auth>Container</res-auth>
 </resource-ref>
</web-app>This should help....

How can I get back to the future?

I have a 15" MacBook Pro running 10.6.8. Last night I upgraded to Lion and honest to goodness I'd rather have a Windows PC. I have only to programs for which I use a computer -- Adobe PhotoShop CS2 and Bible software,for both of which I paid near $600 -- neither of which are supported in Lion. Is it possible to get back to 10.6.8 without loosing everything on my hard drive? Thank you kindly.

As far as I know, Apple mail itself is not directly compatible between 10.7 and 10.6.   This gives you a couple options. You could:
1. Buy an external hard drive, partition it for room, install 10.6 onto it, and install Photoshop, your Bible program, and use 10.7 for everything else on your internal, and a second partition act as an exact clone of your internal.     You will probably need to contact Adobe to register your external hard drive as the registration code for its Photoshop. Partitioning is described here: http://docs.info.apple.com/article.html?artnum=61301
Cloning is described on my FAQ*:
http://www.macmaps.com/backup.html
Lastly, I'd make a second clone of the first to ensure you don't lose data in the future, and manage both clones.
2. More complicated would be to export your applications to all 10.6 compatible formats. Mail would have to be copied to an IMAP account.    Addressbook exported to vCard. iTunes and Office are thankfully already compatible. Once that is all setup, you would clone your machine twice. Next you'd erase and install 10.6.   You'd then copy your Users -> yourname -> Music folder from the backup, and the Users -> yourname -> Documents folder on your backup to your 10.6 Users -> yourname folder, and copy the supporting preferences of Photoshop, and your bible program to the relevant folders.   Lastly you'd open Photoshop and work with Adobe on reregistering your Photoshop to your 10.6 machine.   In the future always keep at least two clones of your data before installing any updates, and read the tips on upgrading like those on my FAQ*:
http://www.macmaps.com/upgradefaq.html

I have two hard drives one SSD, one HDD. How do I make programs on the two HDs appear in one applications folder?

I am use to windows when you install a program regardless of where is it install it will appear in the programs part of start. I was wondering if there is a way to do something similar on mac?

Two things -
You really should only install programs in the /Applications folder on your system HD. Installing them in other locations is an invitation to problems.
OS X isn't Windows and there is no "Start Menu". If you want to see all applications you can do that by opening the /Applications folder that is by default on your Dock. The second way is to open the OS X Launchpad. But your applications need to be in the /Applications folder to begin with. You can also use the Dock to see or access any or all of your applications. Just drag them from the /Applications folder directly to the Dock. The "icons" in the Dock are actually aliases to the actual applications. There are also third-party Dock replacements or enhancements that do more than what the OS X Dock does itself.

How to finish ABAP program in the process chains

Hello All,
we have one ABAP program in the process chains which was created in the BW system only.
this program we are using in the synchronous mode. according to my understanding we can not capture the failure of the ABAP program when it is in the synchronous mode.
but i found a way through one this forum topic to capture the failure of the program through asynchrous mode by calling a function module RSPC_ABAP_FINISH but it was with the R/3 program in BW.
can we use the same function module for BW program also.
kindly let me know what steps we need to follow for the BW program in the process chains to capture the failure status.
Regards,
Ala.

Hi Ala,
we created an own processtype, look at this HowTo: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/45d8a990-0201-0010-a290-f22083728179
and than also an abap which can end red or green:
PARAMETERS: red RADIOBUTTON GROUP radi,
green RADIOBUTTON GROUP radi.
IF NOT green IS INITIAL.
MESSAGE i162(00) WITH 'Status' 'Green'.
ELSE.
MESSAGE e162(00) WITH 'Status' 'Red'.
ENDIF.
with i-message process ends green, with e-message process ends red.
/manfred

How do you transfer programs from the old mac to a new one

How do you move programs from your current IMAC to a NEW one??

See Pondini's Setup New Mac guide.

How to let two programs access the same BDB data

I want to use two programs to access data in one BDB database, but get this error
multiple databases specified but not supported by file
db open failed:Invalid argument
I do not know how to deal with it.....
anyone can help?
thank you first

Hello,
Can you clarify a bit more as to what you are doing?
A message like:
multiple databases specified but not supported by file
open: Invalid argument
is expected when you are incorrectly creating multiple databases
within a single physical file.
The details are at:
http://www.oracle.com/technology/documentation/berkeley-db/db/ref/am/opensub.html
http://www.oracle.com/technology/documentation/berkeley-db/db/api_c/db_open.html
It is possible to contain multiple databases in a single physical file
but the application has to follow some steps in order to do that.
For example you can not attempt to open a second database in a file that
was not initially created using a database name. Doing will generate
the error you posted.
Thanks,
Sandra

How to post a document in the future using DI API?

Hello friends
Please can someone help me find a clever way around this....
I am using SAP 2005 SP01 PL09. I am trying to add an invoice into SAP using a VB.Net application. I want to set the date for the invoice to a future date (e.g. 01/01/2008). The problem is that even though I have set the setting which "Allows future Posting Date" in SBO I still get a "Date deviates from permissable range" Error (-5002) when I try adding the invoice.
I know that when I try post the invoice through the SAP front end (i.e. still posting it in 01/01/2008) I get a confirmation screen which pops up and says "Posting Date later that System Date" and I can either click on "OK" or "Cancel". If i click on OK the Invoice goes through no problem.
This however does not work when i try use the DIAPI to do the same thing.
How can i bypass this error when i use the DIAPI??
Any help is much appreciated
Greeshma

Hello,
if you want to escalate to SAP, I think you upgrade your SAP B1 to the latest PL i.e. PL 36. Let me know if the error still persists after upgrading.
Rgds,

How to find out program form the entry made in MCHB table thro backgrounnd

Hi,
we have one case where table MCHB was updated with zero quantity for batches by user ZZZBATCH which is for background job.
Table MCHB was updated with batches with Zero quantity though process order number was set for deletion flag.
Now our client wants by which program this entry has been made?
we dont know which is the background job/program?
we are sure that background job was run as user ZZZBATCH is set for background job.
please help to find out How this entry has been created in the MCHB table.

Find out from CDPOS table for the date/ time this entry was made. From SM37 look out for the jobs that were running then. You should get some clue.
If you can't do that, just try for all programs run by ZZZBATCH and see which of the program uses MCHB table or some BAPIs with * BATCH*.
cheers
Rav

How can you delete programs off the imac g5 osx 10.5.8 completly. My goal is to gain more memory/gigs because my speed is dragging not to mention i only have like 14 free gigs

My imac g5 osx 10.5.8 is running slow and getting froze alot some programs just take forever. If someone knows how to remove programs safely could you please help me. I don't want to make a mistake that's unfixable. Like, i.e ( operating firefox now ,but i have a safari app. Do i need safari ? Am i even running that at all ?) Also i have 4 dvd players-imovie,dvd player,mac the ripper and front row do i need all them ?
And quicktime but running bit torrent. If anyone knows where to download good games for my version i would appreciate it also rpg,action,strategy,puzzle please and thanks.

bjones81 wrote:
Thank you so much ...
You're Welcome. Enjoy your Mac.
http://www.apple.com/findouthow/mac/

MP/WebEx 8.0 - How to View Meetings Scheduled in the Future

I have a newly deployed MeetingPlace/WebEx 8.0 on-prem node solution with primary/backup configuration, with the WebEx productivty tools. After an upgrade, I want to verify that any meetings scheduled before the upgrade, are still there- that those entries/reservations on MeetingPlace didn't somehow get wiped out during the upgrade. MeetingPlace Conference Manager allows me to see meetings in progress or what has already taken place, but I don't see a way how to view future/upcoming scheduled meetings. In our environment we can do ad-hoc conferencing by starting it via the TUI, or WebEx short-cut on the desktop, and I'm wondering whether MeetingPlace 8.0 even bothers to reserve audio ports, and doesn't really care about the schedule since we have an integration into Outlook calendar. Does MeetingPlace 8 just let Outlook calendar keep track of the reservations and Meetingplace doesn't care? I'm think that since the meeting organizer doesn't necessarily state how many attendees per meeting, MeetingPlace wouldn't even know how many audio or web ports to reserve. So,can someone speak to whether MeetingPlace 8 keeps track of scheduled meetings and/or reserves audio ports, such as MeetingPlace Express did, or where to look whether it isn't configured to keep track?
Thanks!
Mike.

Mike,
If you scheduled you MP 8 meetings using the WebEx productivity tools you are all set. When scheduling using WebEx productivity tools the meetings are not reserved on MP as you suppected.
If you scheduled using MP scheduling then you need to reschedule the meetings using the WebEx productivity tool. This is easily done by going into the Outlok scheduled meeting and clicking on the WebEx ball and then saving. The recipiants will get the new meeting information.
Let me know if you have any questions.
John

How to DVR a program in the future?

Similar Messages

Maybe you are looking for