How to dynamically call and order program modules

Hey guys,
I have ‘x’ pieces of code (x could be 10’s or 100’s of modules).
I need to be able to dynamically call and run ‘y’ of them, but I need to be able to do it in parallel, and some of them might be in order.
For instance ‘A’, ‘B’ and ‘C’ need to run in parallel,
but 'D' needs data from 'A' and will run after 'A',
and 'E' needs to run after ‘D’,
and ‘F’ needs data from 'C' and will to run after ‘C’
So I have two questions.
How should I organize and order these dynamic calls?
and What method should I use to pass data along from one VI to another?

jcyth wrote:
[...]But when you thought of Teststand, did you have a specific feature of Teststand that you thought it would be a viable solution?
Since we will probably have the end user choose the modules required in this module operation, having a premade sequence editor might be nice
My point mentioning TestStand is that my feeling tells me that you are going to re-implement some very basic functions which are already included in TestStand.
To be honest: TestStand adds additional costs. You have to purchase licenses, you should get some training which takes time until getting payed off.
But on the other hand: You also need time to implement and test your self-made approach. Also: Does this project grow in the future? Do you need additional features in the (near) future?
Going into this will result in a break even in costs where you can say: if i take more time in my self-made approach, it is cheaper to go for TestStand right from the beginning.
TestStand is designed to be VERY flexible. But you have to get familiar to this flexibiity in order to get where you want. Therefore, i recommend you to collect some information before making the decision. Maybe you want to invite some sales guy from NI in order to present TestStand to you....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

The customers and orders form modules

Please,i am new to oracle forms.I have been reading a book on forms ,but the book uses two form modules created by Oracle for demo purposes, the Customer and Orders form modules.I need to access and open these form modules from my form builder.I have not been able to figure out how to do that.Please how can i open the customers and orders module from form builder.
I will appreciate any help.

Assuming you have the .FMB files stored on your hard drive, you can simply double-click on them or use File -> Open in Forms Builder.

How to edit a program dynamically called from another program

Hi all,
Can anyone help me in coding for a program which call's another
report dynamically from selection screen(for instance z_dynam_called)
and retreive the whole content of the dynamically called program(z_dynam_called)
into an internal table and replace the contents of the internal table with some new code and put it back in z_dynam_called and save it.
Thanks in advance.
Needful will be rewarded with points

Hi,
Follow this:
1) U can pass data from one program to another in a single login using SAP memory......
2) u can create a DBtable update dat table using ur first pgm and fetch from second program.....
3) U can pass the report output using EXPORT TO MEMORY addition and get it back using IMPORT FROM MEMORY..........
Eg:
Export the selected rows to the next program
EXPORT final TO MEMORY ID 'ABC'.
CALL TRANSACTION 'XXX'.
XXX is the tcode for the other program where u want to import the values.
In the second program
INITIALIZATION.
IMPORT the internal table from the first program
IMPORT final FROM MEMORY ID 'ABC'.
Thanks and Regards,
Reward If Helpful

Issue in Dynamic Structure and Component Program

Hi,
I have a requirement of creating an inbound idoc program and populating dynamic structures. The program for the dynamic structure creation is as follows: ( I have been referencing Heilmans Blog ): The part for the inbound idoc creation works fine. The data will come in a flat file with Table name and 15 characterstcis. The table name is known at runtime. I need to create the dynamic table, find out the components and then populate the custom table with the dynamically created structures.
Custom table: 4 components
Internal table from file: 15 components with value.
There could be more than one table in the flat file and not all components or char in the flat file is mapped to the table. I would need some expertise in coding the OO part of the program.
Any inputs will be apprciated:
<removed 6845 lines of code (forum software cut off at this point, there was more!) - did you actually expect anyone to read that? Also, please use code tags (the "<>" icon on the toolbar)>
Edited by: Mike Pokraka on Aug 3, 2008 6:15 PM

Hi,
The program works fine fo creating inbound idocs. It is the dynamic structure population that seems to be the problem mentioned earlier: Here is the code:
*& Report /FACTGLB/GTDMI_VARTAB_IDOCS02                               *
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
          DEVELOPER: Aveek Ghose
      CREATION DATE: 2008-04-18
         RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
          DEVELOPER:
       DATE APPLIED: YYYY-MM-DD
         SCR NUMBER: <Scope Change Request ID>
         RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
        DESCRIPTION:
REPORT ZGTDMI_VARTAB_IDOCS_DYNAMIC
        NO STANDARD PAGE HEADING
        LINE-SIZE   150
        LINE-COUNT 55
        MESSAGE-ID zfactglb.
**Include for Global Data Declaration
*INCLUDE /FACTGLB/GTDMI_VARTAB_TOP02.
**Include for Selection Screen
*INCLUDE /FACTGLB/GTDMI_VARTAB_SEL02.
**Include for Sub Routines
*INCLUDE /FACTGLB/GTDMI_VARTAB_FORMS02.
*& Include           /FACTGLB/GTDMI_VARTAB_TOP02                      *
*& Include           /FACTGLB/GTDMI_VARTAB_TOP02                      *
*& Include           /FACTGLB/GTDMI_VARTAB_TOP
*& Include           /FACTGLB/GTDMI_VARTAB_TOP
PROGRAM DESCRIPTION: Variant Table and Content Upload Interface.
          DEVELOPER: Aveek Ghose
      CREATION DATE: 2008-04-18
         RDD NUMBER: DCDD027
TRANSPORT NUMBER(S): RD2K902769
*-- REVISION HISTORY -
          DEVELOPER:
       DATE APPLIED: YYYY-MM-DD
         SCR NUMBER: <Scope Change Request ID>
         RDD NUMBER: <Toolset Object ID>
TRANSPORT NUMBER(S):
        DESCRIPTION:
TYPE POOLS
*Type declaration for ALV display
TYPE-POOLS : slis.
Include .
type-pools: col,                                            "#EC *
            icon,                                           "#EC *
            sym,                                            "#EC *
            abap.                                           "#EC *
Target structure definitions
tables:
E1CUVTM,                                                  "#EC *
E1DATEM,                                                  "#EC *
E1CUV1M,                                                  "#EC *
edp21,                                                    "#EC *
edi_dc40,                                                 "#EC *
edi_dd40,                                                 "#EC *
edi_ds40.                                                 "#EC *
GLOBAL TYPES
TYPES : BEGIN OF ty_vartab.
        include structure E1CUVTM.
TYPES: END OF ty_vartab.
TYPES : BEGIN OF ty_vartabdate.
        INCLUDE STRUCTURE E1DATEM.
TYPES : END OF ty_vartabdate.
*Structure for data retreived
TYPES : BEGIN OF ty_vardetails.
        INCLUDE STRUCTURE E1CUV1M.
TYPES : END OF ty_vardetails.
*Structure for data retreived from table tabinput.
TYPES : BEGIN OF ty_tabinput,
          lines type string,
        END OF ty_tabinput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_dsninput,                               "#EC *
          LINE(101) type c,
        END OF ty_dsninput.
*Structure for data retreived from Table dsn_input.
TYPES : BEGIN OF ty_newinput,                               "#EC *
          LINE(101) type c,
          flag(1) type c,
        END OF ty_newinput.
*Structure for keeping the values of all the custom tables
TYPES : BEGIN OF ty_custom_tabs,
          matnr   TYPE matnr,    "Material Number
          werks   TYPE werks_d, "Plant
          lgort   TYPE lgort_d, "Storage Location
          qunty   TYPE P DECIMALS 2, "Standard Order Quantity
          det_loc TYPE CHAR6, "Detail Location
          class   TYPE CHAR2,   "Class
          rate    TYPE P DECIMALS 2,    "Rate
        END OF ty_custom_tabs.
*Type declared for the internal table and work area which will store
*fields for error log
TYPES : BEGIN OF ty_error_log,
          matnr TYPE matnr,       "Material Number
          mtart TYPE mtart,       "Material Type
          sel_data TYPE char10,   "No of selectyed data
        END OF ty_error_log.
*Structure for keeping the output data
TYPES : BEGIN OF ty_final,
          VTNAM(018) type C,
          CHAR1(030) type C,
          CHAR2(030) type C,
          CHAR3(030) type C,
          CHAR4(030) type C,
          CHAR5(030) type C,
          CHAR6(030) type C,
          CHAR7(030) type C,
          CHAR8(030) type C,
          CHAR9(030) type C,
          CHAR10(030) type C,
          CHAR11(030) type C,
          CHAR12(030) type C,
          CHAR13(030) type C,
          CHAR14(030) type C,
          CHAR15(030) type C,
          FLAG(001) type C,
        END OF ty_final.
TYPES: begin of TY_CONTENTHD,
          VTNAM(018) type C,
          FLAG(001) type C,
end of TY_CONTENTHD.
TYPES: begin of TY_CONTENT,
          VTNAM(018) type C,
          CHAR1(030) type C,
          CHAR2(030) type C,
          CHAR3(030) type C,
          CHAR4(030) type C,
          CHAR5(030) type C,
          CHAR6(030) type C,
          CHAR7(030) type C,
          CHAR8(030) type C,
          CHAR9(030) type C,
          CHAR10(030) type C,
          CHAR11(030) type C,
          CHAR12(030) type C,
          CHAR13(030) type C,
          CHAR14(030) type C,
          CHAR15(030) type C,
          FLAG(001) type C.
TYPES: end of TY_CONTENT.
TYPES: BEGIN OF TY_E1CUVTM,
          MSGFN       TYPE MSGFN,
          VAR_TAB       TYPE APITABL,
          STATUS       TYPE RCUTBST,
          VTGROUP       TYPE RCUTBGR,
          AUTHSTRUC       TYPE RCUTBBE,
          AUTHENTRY       TYPE RCUFNBI,
          FLDELETE       TYPE FLLKENZ,
          DBTABNAME       TYPE TABNAME16,
          DBCONACTIVE TYPE DBCON_ACTI,
          PRESDEC       TYPE VTDCT,
       END OF TY_E1CUVTM.
TYPES: BEGIN OF TY_E1CUV1M,
          MSGFN     TYPE MSGFN,
          VTLINENO     TYPE VTLINENO,
          VTCHARACT     TYPE ATNAM,
          ATWRT     TYPE ATWRT,
          ATFLV     TYPE ATFLV,
          ATAWE     TYPE MSEHI,
          ATFLB     TYPE ATFLB,
          ATAW1     TYPE MSEHI,
          ATCOD     TYPE ATCOD,
          ATTLV     TYPE ATTLV,
          ATTLB     TYPE ATTLB,
          ATPRZ     TYPE ATPRZ,
          ATINC     TYPE ATINC,
          VTLINENO5     TYPE VTLINENO5,
       END OF TY_E1CUV1M.
TYPES: BEGIN OF TY_E1DATEM,
          MSGFN       TYPE MSGFN,
          KEY_DATE       TYPE SYDATUM,
          AENNR       TYPE AENNR,
          EFFECTIVITY TYPE      CC_MTEFF,
       END OF TY_E1DATEM.
TYPES: BEGIN OF ty_vtnam,
         vtint TYPE vtint, " Internal number of variant table
         vtnam TYPE vtnam, " Name of variant table
         error TYPE char1, " Indicates error in data format
         reas   TYPE char50, " Reason for failure
       END OF ty_vtnam.
Get data type for characteristic
TYPES: BEGIN OF ty_cabn,
        atinn TYPE atinn,       "Internal characteristic
        atnam TYPE atnam,       "Characteristic Name
        atfor TYPE atfor,       "Data type of characteristic
        atson TYPE atson,       "Indicator: Additional Values
        atprt TYPE atprt,       "Check table
        atprr TYPE atprr,       "Name of Check Report Program
        atprf TYPE atprf,       "Function Module for Checking Values
        anzdz TYPE anzdz,       "Number of Decimal Places
        check TYPE char1,       "Indicates check required or not
       END OF ty_cabn.
Get field names of variant table
TYPES: BEGIN OF ty_cuvtab_fld,
         vtint TYPE vtint,   " Internal number of variant table
         atinn TYPE atinn,   " Internal characteristic
         vtpos TYPE vtpos,   " Item number of characteristic in variant
         exist TYPE char1,   " X Indictaes characteristic is part of fil
       END OF ty_cuvtab_fld.
Store all data in internal table
TYPES: BEGIN OF ty_file,
          vtnam TYPE vtnam,
          char1 TYPE atwrt,
          char2 TYPE atwrt,
          char3 TYPE atwrt,
          char4 TYPE atwrt,
          char5 TYPE atwrt,
          char6 TYPE atwrt,
          char7 TYPE atwrt,
          char8 TYPE atwrt,
          char9 TYPE atwrt,
          char10 TYPE atwrt,
          char11 TYPE atwrt,
          char12 TYPE atwrt,
          char13 TYPE atwrt,
          char14 TYPE atwrt,
          char15 TYPE atwrt,
          flag   TYPE char1,
          error TYPE char50,
       END OF ty_file.
To check for duplicates
TYPES: BEGIN OF ty_dupl,
          vtnam TYPE vtnam,
          char1 TYPE atwrt,
          char2 TYPE atwrt,
          char3 TYPE atwrt,
          char4 TYPE atwrt,
          char5 TYPE atwrt,
          char6 TYPE atwrt,
          char7 TYPE atwrt,
          char8 TYPE atwrt,
          char9 TYPE atwrt,
          char10 TYPE atwrt,
          char11 TYPE atwrt,
          char12 TYPE atwrt,
          char13 TYPE atwrt,
          char14 TYPE atwrt,
          char15 TYPE atwrt,
          slnid TYPE slnid,
        END OF ty_dupl.
Get previously loaded characteristic values for internal table (CHAR)
TYPES: BEGIN OF ty_cuvtab_valc,
        vtint TYPE vtint,   " Internal number of variant table
        slnid TYPE slnid,   " Key for value combination in variant tab
        atinn TYPE atinn,   " Internal characteristic
        valc   TYPE atwrt,   " Characteristic Value
      END OF ty_cuvtab_valc.
Get previously loaded characteristic values for internal table (NUM)
TYPES: BEGIN OF ty_cuvtab_valn,
        vtint TYPE vtint,      " Internal number of variant table
        slnid TYPE slnid,      " Key for value combination in variant tab
        atinn TYPE atinn,      " Internal characteristic
        val_from TYPE atflv,   " Internal floating point from
       END OF ty_cuvtab_valn.
Store column positions of characteristics
TYPES: BEGIN OF ty_col_pos,
         vtint TYPE vtint,   " Internal number of variant table
         vtnam TYPE vtnam,   " Variant table name
         atinn TYPE atinn,   "Internal characteristic
         atnam TYPE atnam,   "Characteristic Name
         field TYPE fieldname,   "Field name
         req    TYPE char1,       " Required or not
         vtpos TYPE vtpos,       " Item number of characteristics
       END OF ty_col_pos.
Store valid values for characteristics
TYPES: BEGIN OF ty_cawn,
          atinn TYPE atinn,   " Internal characteristic
          atzhl TYPE atzhl,   " Int counter
          atwrt TYPE atwrt,   " Characteristic Value
          atflv TYPE atflv,   " Internal floating point from
          lkenz TYPE lkenz,   " Deletion indicator
      END OF ty_cawn.
Store error messages for individual lines
TYPES: BEGIN OF ty_error,
         vtnam TYPE vtnam,       " Variant table name
         fname TYPE fieldname,   " Fieldname
         atnam TYPE atnam,       " Characteristic name
         atwrt TYPE atwrt,       " Characteristic value
         row    TYPE char5,       " Row id
      END OF ty_error.
Begin TPR# 4618
To store unique number for variant
TYPES: BEGIN OF ty_vnt_ma,
        vtnam     TYPE vtnam,
        unique_no TYPE ZGTDM_UNQN,
        no_chr    TYPE ZGTDM_NO_CHR,
      END OF ty_vnt_ma.
To find out concatenated number for
TYPES: BEGIN OF ty_split,
        f1 TYPE char6,
      END OF ty_split.
TYPES: BEGIN OF ty_charval,
        char TYPE char30,
      END OF ty_charval.
TYPES: BEGIN OF TY_DATA,
       name TYPE string,
       value(15) type c,
      END OF TY_DATA.
DATA: I_DATATAB TYPE STANDARD TABLE OF TY_DATA.
TYPES:
TUMLS_MESSTYPE type /SAPDMC/LS_MESSTYPE,
TUMLS_MESSTYPETXT type EDI_TEXT60,
TUMLS_MESSCODE type EDIPMESCOD.
TYPES:
TUMLS_TABNAME TYPE TABNAME,                               "#EC *
TUMLS_SEGMENT TYPE TABNAME.                               "#EC *
TYPES:
TUMLS_PATHFILE TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILENAME TYPE /SAPDMC/LS_FILENAME,
TUMLS_FILETEXT TYPE /SAPDMC/LS_FILETEXT.
TYPES:
BEGIN OF type_errorline,
     msgty type SYMSGTY,
     id type SYMSGID,
     msgno type symsgno,
     par1 type symsgv,
     par2 type symsgv,
     par3 type symsgv,
     par4 type symsgv,
END OF type_errorline.
TYPES:
type_errortab TYPE SORTED TABLE
                OF type_errorline
                WITH NON-UNIQUE KEY id msgno par1 par2 par3 par4.
DATA:
    LV_INDEX TYPE SY-INDEX,
    LV_INDEX2 TYPE SYINDEX,
    LV_TABLE1 TYPE REF TO DATA,
    LV_TABLE2 TYPE REF TO DATA,
    LV_TABLE3 TYPE REF TO DATA,
    LV_TABLE4 TYPE REF TO DATA,
    LV_LINE1 TYPE REF TO DATA,
    LV_LINE2 TYPE REF TO DATA,
    LV_LINE3 TYPE REF TO DATA,
    LV_LINE4 TYPE REF TO DATA,
    LV_OFFSET1 TYPE SYTABIX,
    ST_IS_LAYOUT_ALV TYPE SLIS_LAYOUT_ALV,
    L_IT_FCATLOG_ALV TYPE SLIS_T_FIELDCAT_ALV,
    L_IT_FLDCAT TYPE LVC_T_FCAT.
GLOBAL INTERNAL TABLES
DATA : i_newinput TYPE STANDARD TABLE OF ty_newinput INITIAL SIZE 0."#EC *
DATA : i_contentheader1 TYPE STANDARD TABLE OF ty_contenthd INITIAL SIZE 0."#EC *
DATA : i_contenttab1 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab2 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab3 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_contenttab4 TYPE STANDARD TABLE OF ty_content INITIAL SIZE 0."#EC *
DATA : i_E1CUV1M TYPE STANDARD TABLE OF E1CUV1M INITIAL SIZE 0."#EC *
DATA : i_errortab TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
GLOBAL WORK AREAS
**Internal Table for the structure TY_T001L
DATA : wa_vartab TYPE ty_vartab.                            "#EC *
DATA : wa_vartabdate TYPE ty_vartabdate.                    "#EC *
DATA : wa_vardetails TYPE ty_vardetails.                    "#EC *
DATA : wa_tabinput TYPE ty_tabinput.                        "#EC *
DATA : wa_dsninput TYPE ty_dsninput.                        "#EC *
DATA : wa_newinput TYPE ty_newinput.                        "#EC *
DATA : wa_gnewinput TYPE ty_newinput.                       "#EC *
DATA : wa_ginput_data TYPE ty_newinput.                     "#EC *
DATA : wa_final TYPE ty_final.                              "#EC *
DATA : wa_content TYPE ty_content.                          "#EC *
DATA : wa_contenthd TYPE ty_contenthd.                      "#EC *
DATA : wa_contentheader type ty_contenthd.                  "#EC *
DATA : wa_contenttab TYPE ty_content.                       "#EC *
DATA : wa_content1 TYPE ty_content.                         "#EC *
DATA : wa_contenthd1 TYPE ty_contenthd.                     "#EC *
DATA : wa_contentheader1 type ty_contenthd.                 "#EC *
DATA : wa_contenttab1 TYPE ty_content.                      "#EC *
DATA : wa_contenttab2 TYPE ty_content.                      "#EC *'
DATA : wa_contenttab3 TYPE ty_content.                      "#EC *
DATA : wa_contenttab4 TYPE ty_content.                      "#EC *
DATA : wa_E1CUVTM TYPE E1CUVTM.                             "#EC *
DATA : wa_E1CUV1M TYPE E1CUV1M.                             "#EC *
DATA : wa_E1DATEM TYPE E1DATEM.                             "#EC *
DATA : wa_error_tab TYPE solisti1.                          "#EC *
INTERNAL TABLES AND WORK AREAS FOR BDC
*Internal Table to store the data to display the error message
DATA : i_errormsg TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
*Internal Table to store the data to display the error message
DATA : i_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
DATA : itab_error TYPE STANDARD TABLE OF solisti1 INITIAL SIZE 0."#EC *
**Work area to store the data to display the error message
DATA : wa_errormsg TYPE solisti1.                           "#EC *
**Internal table which will store data for the error log
DATA:i_error_log TYPE STANDARD TABLE OF ty_error_log INITIAL SIZE 0."#EC *
GLOBAL VARIABLES
DATA: G_FILE TYPE string.                                  "#EC *
DATA : g_ctr_input_recs(5) type c.                          "#EC *
DATA: g_ctr_output_recs(5) type p.                         "#EC *
data : g_msg(100) type c.                                   "#EC *
data: g_struct_file TYPE string.                           "#EC *
data: g_login type FILEINTERN.                             "#EC *
data: g_phyin type string.                                 "#EC *
DATA: g_lprnt type RSPOPSHORT.                             "#EC *
DATA: g_FNAME1 TYPE STRING.                                "#EC *
DATA : g_repid TYPE repid,                                  "#EC *
       g_exit(1) TYPE C,                                    "#EC *
       gx_variant type disvariant.                         "#EC *
DATA : g_lines    TYPE i .                                  "#EC *
data : g_save(1) type c.                                    "#EC *
DATA : g_splid     TYPE rspoid .                            "#EC *
data: p_login type FILEINTERN.                             "#EC *
data: p_phyin type string.                                 "#EC *
DATA:
go_table         TYPE REF TO cl_salv_table,
go_sdescr        TYPE REF TO cl_abap_structdescr,
go_tdescr        TYPE REF TO cl_abap_tabledescr,
gdo_data         TYPE REF TO data,
gdo_handle       TYPE REF TO data,
gs_comp          TYPE abap_componentdescr,
gt_components    TYPE abap_component_tab.
FIELD-SYMBOLS:
       TYPE table.
GLOBAL CONSTANTS
CONSTANTS c_msgar   TYPE rslgarea   VALUE 'F8'.             "#EC *
CONSTANTS c_msgid   TYPE rslgsubid VALUE 'E'.              "#EC *
CONSTANTS c_urgnc   TYPE char04     VALUE 'HIGH'.           "#EC *
CONSTANTS C_X(1)       TYPE C          VALUE 'X'.           "#EC *
CONSTANTS C_Y(1)       TYPE C          VALUE 'Y'.           "#EC *
CONSTANTS C_Z(1)       TYPE C          VALUE 'Z'.           "#EC *
CONSTANTS C_E(1)       TYPE C          VALUE 'E'.           "#EC *
CONSTANTS C_SAP(3)     TYPE C          VALUE 'SAP'.         "#EC *
CONSTANTS C_MOD(3)     TYPE C          VALUE 'MOD'.         "#EC *
CONSTANTS C_MD1(3)     TYPE C          VALUE 'MD1'.         "#EC *
CONSTANTS C_MD2(3)     TYPE C          VALUE 'MD2'.         "#EC *
CONSTANTS C_MD3(3)     TYPE C          VALUE 'MD3'.         "#EC *
constants:   c_000001(6) type c value '000001',            "#EC *
             c_e1cuv1m(7) type c value 'E1CUV1M',           "#EC *
             c_02(2) type c value '02',                    "#EC *
             c_009(3)   type c value '009',                 "#EC *
             c_0001(4) type c value '0001'.                 "#EC *
constants: c_e1datem(7) type c value 'E1DATEM'.            "#EC *
constants: c_e1cuvtm(7) type c value 'E1CUVTM'.            "#EC *
GLOBAL INTERNAL TABLES FOR ALV DISPLAY
*Internal tables for ALV Field cat
DATA :
i_fieldcat_ov TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_dtl TYPE STANDARD TABLE OF slis_fieldcat_alv INITIAL SIZE 0,"#EC *
i_fieldcat_ov1 TYPE lvc_t_fcat,                             "#EC *
i_events       TYPE slis_t_event.                           "#EC *
GLOBAL WORK AREAS FOR ALV DISPLAY
*Work area for ALV Field layout
DATA : wa_layout TYPE slis_layout_alv.                      "#EC *
*Work area for Field Cat. Table
DATA : wa_fieldcat TYPE slis_fieldcat_alv.                  "#EC *
GLOBAL VARIABLES FOR ALV DISPLAY
DATA : g_event TYPE slis_t_event.                          "#EC *
DATA : g_top_of_page TYPE slis_t_listheader.                "#EC *
DATA : g_ok_code     TYPE char4.                            "#EC *
DATA : g_variant     type disvariant.                       "#EC *
GLOBAL CONSTANTS FOR ALV DISPLAY
BAL handling
data: iv_log_handle type BALLOGHNDL.                        "#EC *
data: is_log_header type bal_s_log.                         "#EC *
data: iv_object     type bal_s_log-object    value 'CAPI'. "#EC *
data: iv_subobject type bal_s_log-subobject value 'CAPI_LOG'."#EC *
data: iv_tcode      type bal_s_log-altcode   value 'SE38'. "#EC *
*MOD-005
RANGES:
    R_MESTYP FOR EDIDC-MESTYP,                              "#EC *
    R_CREDAT FOR EDIDC-CREDAT,                                  "#EC *
    R_CRETIM FOR EDIDC-CRETIM,                              "#EC *
    R_SNDPRT FOR EDIDC-SNDPRT,                              "#EC *
    R_SNDPRN FOR EDIDC-SNDPRN.                              "#EC *
DATA:
    L_MESSTYPE TYPE TUMLS_MESSTYPE.                         "#EC *
*MOD-005
data:        p_sndprn TYPE EDI_SNDPRN,                      "#EC *
             p_sndprt TYPE EDI_SNDPRT,                      "#EC *
             p_sndpor TYPE EDI_SNDPOR.                      "#EC *
data:        p_rcvprn TYPE EDI_RCVPRN,                      "#EC *
             p_rcvprt TYPE EDI_RCVPRT,                      "#EC *
             p_rcvpor TYPE EDI_RCVPOR.                      "#EC *
data:
init_E1CUVTM type E1CUVTM,                                "#EC *
prev_E1CUVTM type E1CUVTM,                                "#EC *
init_E1DATEM type E1DATEM,                                "#EC *
prev_E1DATEM type E1DATEM,                                "#EC *
init_E1CUV1M type E1CUV1M,                                "#EC *
prev_E1CUV1M type E1CUV1M.                                "#EC *
Source structure definitions
data:
begin of LSMW_TAB_CONTENT,                                "#EC *
    VTNAM(018) type C,
    CHAR1(030) type C,
    CHAR2(030) type C,
    CHAR3(030) type C,
    CHAR4(030) type C,
    CHAR5(030) type C,
    CHAR6(030) type C,
    CHAR7(030) type C,
    CHAR8(030) type C,
    CHAR9(030) type C,
    CHAR10(030) type C,
    CHAR11(030) type C,
    CHAR12(030) type C,
    CHAR13(030) type C,
    CHAR14(030) type C,
    CHAR15(030) type C,
    FLAG(001) type C,
end of LSMW_TAB_CONTENT.
Counters
data:
g_cnt_VAR_TAB type i,                                    "#EC *
g_cnt_TAB_CONTENT type i.                                "#EC *
Counter ct_xxxxxxxxxx: number of transferred records
data:
ct_edi_dc40 type i,                                       "#EC *
cs_edi_dc40 type i,                                       "#EC *
ct_E1CUVTM type i,                                       "#EC *
cs_E1CUVTM type i,                                       "#EC *
ct_E1DATEM type i,                                       "#EC *
cs_E1DATEM type i,                                       "#EC *
ct_E1CUV1M type i,                                       "#EC *
cs_E1CUV1M type i.                                       "#EC *
Global data definitions and data declarations
DATA: wa_cabn TYPE ty_cabn,
      wa_cawn TYPE ty_cawn,
      wa_file TYPE ty_file,
      wa_vtnam TYPE ty_vtnam,
      wa_cuvtab_fld TYPE ty_cuvtab_fld,
      wa_cuvtab_valn TYPE ty_cuvtab_valn,
      wa_cuvtab_valc TYPE ty_cuvtab_valc,
      wa_col_pos     TYPE ty_col_pos,
      wa_error       TYPE ty_error,
      wa_dupl        TYPE ty_dupl,
      wa_dupl_file   TYPE ty_dupl.
DATA: wa_vnt_ma TYPE ty_vnt_ma,
      wa_split TYPE ty_split.
DATA: wa_charval TYPE ty_charval.                           "#EC *
Internal table
DATA: i_cabn        TYPE STANDARD TABLE OF ty_cabn,         "#EC *
      i_cabn_temp   TYPE STANDARD TABLE OF ty_cabn,         "#EC *
      i_cabn_atinn TYPE STANDARD TABLE OF ty_cabn,         "#EC *
      i_file        TYPE STANDARD TABLE OF ty_file,         "#EC *
      i_file_tmp    TYPE STANDARD TABLE OF ty_file,         "#EC *
      i_vtnam       TYPE STANDARD TABLE OF ty_vtnam,        "#EC *
      i_cuvtab      TYPE STANDARD TABLE OF ty_vtnam,        "#EC *
      i_cuvtab_fld TYPE STANDARD TABLE OF ty_cuvtab_fld,   "#EC *
      i_cuvtab_valn TYPE STANDARD TABLE OF ty_cuvtab_valn, "#EC *
      i_cuvtab_valc TYPE STANDARD TABLE OF ty_cuvtab_valc, "#EC *
      i_col_pos     TYPE STANDARD TABLE OF ty_col_pos,      "#EC *
      i_cawn        TYPE STANDARD TABLE OF ty_cawn,         "#EC *
      i_cawn_n      TYPE STANDARD TABLE OF ty_cawn,         "#EC *
      i_cawn_c      TYPE STANDARD TABLE OF ty_cawn,         "#EC *
      i_cawn_i      TYPE STANDARD TABLE OF ty_cawn,         "#EC *
      i_cuv_error   TYPE STANDARD TABLE OF ty_vtnam,        "#EC *
      i_dupl        TYPE STANDARD TABLE OF ty_dupl.         "#EC *
DATA: i_vnt_ma TYPE STANDARD TABLE OF ty_vnt_ma,            "#EC *
      i_split TYPE STANDARD TABLE OF ty_split.             "#EC *
DATA: i_dupl_file TYPE STANDARD TABLE OF ty_dupl.           "#EC *
DATA: i_charval TYPE STANDARD TABLE OF ty_charval.          "#EC *
Constants
CONSTANTS: c_char TYPE atfor VALUE 'CHAR',                  "#EC *
           c_date TYPE atfor VALUE 'DATE',                  "#EC *
           c_time TYPE atfor VALUE 'TIME',                  "#EC *
           c_varcond TYPE atnam VALUE 'Z_VARCOND'.          "#EC *
Field Symbols
FIELD-SYMBOLS: TYPE ANY.
Variables
DATA: g_raw(500) TYPE c,                                   "#EC *
      g_invalid   TYPE char1,                               "#EC *
      g_error     TYPE char1,                               "#EC *
      g_message   TYPE char50,                              "#EC *
      g_slnid_c    TYPE slnid,                              "#EC *
      g_slnid_n    TYPE slnid,                              "#EC *
      g_row        TYPE char5.                              "#EC *
DATA: g_varcond TYPE varcond, "Variant condition "#EC NEEDED
      g_split_var TYPE i.                                   "#EC *
Types: begin of ty_charname,
         name type atnam,
       end of ty_charname.
data: wa_charname type ty_charname,                         "#EC *
      i_charname type standard table of ty_charname.        "#EC *
data: cnt_i type i,                                         "#EC *
      g_tabix type char10.                                  "#EC *
Types: begin of ty_itab_zedidc40.
        include structure edi_dc40.
TYPES:       end of ty_itab_zedidc40.
Types: begin of ty_itab_zedidd40.
        include structure edi_dd40.
TYPES: end of ty_itab_zedidd40.
DATA: itab_zedidc40 type standard table of
                  ty_itab_zedidc40 initial size 0.          "#EC *
DATA: itab_zedidd40 type standard table of
                  ty_itab_zedidd40 initial size 0.          "#EC *
DATA: wa_itab_zedidc40 type ty_itab_zedidc40.
DATA: wa_itab_zedidd40 type ty_itab_zedidd40.
*MOD-009
data: itab_ze1cuvtm type e1cuvtm,                           "#EC *
      itab_ze1datem type e1datem,                           "#EC *
      itab_ze1cuv1m type e1cuv1m.                           "#EC *
data: wdocnum(16) type n value 0.                           "#EC *
data: wsegnum(6) type n value 0.                           "#EC *
data: witemno(10) type n value 0.                           "#EC *
data: witemno_new(10) type n value 0.                      "#EC *
data: witemno_gst(10) type n value 0.                      "#EC *
data: witemno_qst(10) type n value 0.                      "#EC *
TYPES: BEGIN OF ty_input_data1,                             "#EC *
          line(560) type c,
          flag(1) type c,
       END OF ty_input_data1.
DATA: i_input_data type standard table of
                  ty_input_data1 initial size 0. "with header line.
DATA: i_input_data1 type standard table of
                  ty_input_data1 initial size 0. "with header line.
DATA: wa_input_data type ty_input_data1.                    "#EC *
DATA: g_cnt_input_recs type i.                              "#EC *
DATA: g_flg_error type c.                                   "#EC *
DATA: l_lines type i.                                       "#EC *
DATA: l_tabix type i.                                       "#EC *
DATA: wa_input_data1 type ty_input_data1.                   "#EC *
DATA: FILE TYPE STRING.
Fields that are made available to the user:
DATA:
g_cnt_records_read TYPE i,                                "#EC *
g_cnt_records_transferred TYPE i,                         "#EC *
g_cnt_transactions_read TYPE i,                           "#EC *
g_cnt_transactions_transferred TYPE i,                    "#EC *
g_cnt_idocs_package TYPE i.                               "#EC *
data: v_log_handle type balloghndl.                         "#EC *
DATA: gt_curr_edi_dc40 TYPE STANDARD TABLE OF edi_dc40 initial size 0."#EC *
DATA: gt_curr_edi_dd40 TYPE STANDARD TABLE OF edi_dd40 initial size 0."#EC *
DATA: wa_curr_edi_dc40 TYPE edi_dc40.                       "#EC *
DATA: wa_curr_edi_dd40 TYPE edi_dd40.                       "#EC *
internal table for error messages during conversion
DATA: g_error_tab TYPE type_errortab,                       "#EC *
      wa_errortab TYPE type_errorline.                      "#EC *
DATA: g_edidd_segnam type EDI4SEGNAM,                      "#EC *
       g_edidd_hlevel type EDI4HLEVEC.                      "#EC *
DATA: g_segnum(6) TYPE n.
DATA: g_objecttype(2) type C.
DATA: P_FNAME(128) TYPE C VALUE '/usr/sap/trans/vartabheader'. " MODIF ID MD1 OBLIGATORY.
DATA: P_FNAME1(128) TYPE C VALUE '/usr/sap/trans/vartabcontent'. " MODIF ID MD1 OBLIGATORY.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
      it_fldcat TYPE lvc_t_fcat.
field-symbols: .
data: dy_table type ref to data,
      dy_line type ref to data,
      xfc type lvc_s_fcat,
      ifc type lvc_t_fcat.
data: l_wa_data TYPE TY_CONTENT,
      itab_data TYPE standard table of TY_CONTENT.
DECLARATION FOR SELECTION SCREEN
*selection-screen skip 1.
*For all the input field entries
SELECTION-SCREEN BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
*Parameter for Input File Name:
PARAMETERS:   p_inpt   TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File Variant table
PARAMETERS:   p_inpt1 TYPE RLGRAP-FILENAME MODIF ID MOD . " Presentation server File variant Content
SELECTION-SCREEN END OF BLOCK bl1.
IDoc creation
selection-screen begin of block idocpars
                 with frame title text-006.
parameters:
   p_trfcpt as checkbox default C_X MODIF ID MD3,
   p_packge(5) type n default 1 MODIF ID MD3.
selection-screen end of block idocpars.
SELECTION-SCREEN BEGIN OF BLOCK bl3 WITH FRAME TITLE text-032.
Radio Buttons :
parameters:
rb_apsrv RADIOBUTTON GROUP RB1 DEFAULT 'X' USER-COMMAND UCOM,
rb_convt RADIOBUTTON GROUP RB1,
rb_idoc RADIOBUTTON GROUP RB1,
rb_proc RADIOBUTTON GROUP RB1.
SELECTION-SCREEN END OF BLOCK bl3.
INITIALIZATION
INITIALIZATION.
Check selection-screen entries *
*AT SELECTION-SCREEN.
PERFORM sub_get_physical_file USING p_fpath p_fname.
PERFORM sub_get_physical_file1 USING p_fpath1 p_fname1.
AT SELECTION SCREEN
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
PERFORM sub_get_file. " CHANGING p_fname.         "#EC *
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname1.
PERFORM sub_get_file1. " CHANGING p_fname1.       "#EC *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      STATIC        = C_X
    CHANGING
      FILE_NAME     = P_INPT
    EXCEPTIONS
      MASK_TOO_LONG = 1
      OTHERS        = 2.
IF SY-SUBRC <> 0.
    MESSAGE e241.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INPT1.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      STATIC        = C_X
    CHANGING
      FILE_NAME     = P_INPT1
    EXCEPTIONS
      MASK_TOO_LONG = 1
      OTHERS        = 2.
IF SY-SUBRC <> 0.
    MESSAGE e241.
ENDIF.
At Selection Screen Output
AT SELECTION-SCREEN OUTPUT.
IF rb_apsrv = 'X'.
   LOOP AT SCREEN.
     IF SCREEN-GROUP1 = c_mod.
       SCREEN-INPUT = 0.
     ENDIF.
     IF SCREEN-GROUP1 = c_md2.
       SCREEN-INPUT = 0.
     ENDIF.
     IF SCREEN-GROUP1 = c_md3.
       SCREEN-INPUT = 0.
     ENDIF.
     MODIFY SCREEN.
   ENDLOOP.
endif.
IF rb_apsrv = 'X'.
LOOP AT SCREEN.
    IF SCREEN-GROUP1 = c_md1.
      SCREEN-INPUT = 0.
    ENDIF.
    IF SCREEN-GROUP1 = c_md2.
      SCREEN-INPUT = 0.
    ENDIF.
    IF SCREEN-GROUP1 = c_md3.
      SCREEN-INPUT = 0.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
endif.
START-OF-SELECTION
START-OF-SELECTION.
*Subroutines for start of selection event
PERFORM sub_start_selection.
IF rb_apsrv = 'X'.
    PERFORM sub_upload_data_app.
    MESSAGE i256.
    LEAVE LIST-PROCESSING.
    EXIT.
ELSE.
    PERFORM sub_upload_data.
ENDIF.
PERFORM sub_upload_data.
Get characteristic details
PERFORM sub_get_cabn.
Get value for characteristics
PERFORM sub_get_cawn.
perform sub_convert_transaction.
END-OF-SELECTION.
END OF SELECTION
*MOD-012
Final message
perform sub_final_message_idoc.
Display errorneous variant tables.
perform sub_display_variant.
Display lines with incorrect data
perform sub_display_errorlines.
*Subroutines for end of selection event
PERFORM sub_end_selection.
perform sub_clear_source_tables.
*MOD-012
*& Include           /FACTGLB/GTDMI_VARTAB_FORMS02                    *
*& Include           /FACTGLB/GTDMI_VARTAB_FORMS02                    *

How to find called T-code/Program of another T-code/Program

Hi Experts,
Transaction 1 calls Transaction 2. I need to know, which transaction called transaction 2, being in transaction 2. How?
i.e., Can I find the program which called the current program which is running?? Is there any function module to find out??
Thanks and regards,
Venkat

Standard program is calling custom program and I want to know the standard program.
I created a menu item in help menu of sap screen. So, that Item will come, wherever you are( all SAP sessions ).
I want to give help info based on the t-code in which my new menu item was clicked.
So, I created a new menu item in standard pf-status, which will call my custom program.
In that pf-status I have set the function type as transaction code and it calls the custom transaction code as I require.
Now in my custom transaction code's program, I need to check, from which standard transaction I clicked the new menu item.
I think now you will be able to catch my requirement.
Edited by: VENKAT RAMAN on Dec 9, 2009 3:41 PM
Edited by: VENKAT RAMAN on Dec 9, 2009 3:42 PM

Need idea on how to do question and answer program

I want to create a troubleshooting program where it asks the user questions until its drilled down to an appropriate answer.
I've done this with a web server before but I can't seem to figure out how to do it in a program without involving many many forms. Any ideas on how to do the UI?
Thanks!

Building an expert system is not a trivial process so for a commercial app you'll need to do some research. For an internal app you should probably use a database. For a school project you can get away with storing the data in a file that is loaded into
memory (or simply building the data in memory directly). In any case you'll need to define a table of questions. If you support questions with fixed answers then you'll need a separate table for the answers associated with the questions.
If questions can be different types (as mentioned previously) then you'll also need to track the question type with the question. For the relationship between questions you can go different ways depending upon your requirements. If question 1 with answer
A goes to question 2 but answer B goes to question 3 then you can create a simple reference table that indicates what the next question is given the current question and answer, basically a state machine. If a single answer opens a whole series of questions
then you might do better to group the questions together and manage the transition between groups of questions. It really depends upon your requirements. You'll want to research state machines to implement this though.
On the UI side you really don't need to dynamically create anything. The only thing that changes between questions is the text and possibly the answer format (if you support multiple questions). As I mentioned earlier you can create a separate container
(Panel) for each question type and then show or hide the container based upon the type of question (from your database data). This eliminates the need to dynamically create the UI.

How can I call a java-program as receiver

Hi Folks,
I have to call a java program, based on the XI-Server as receiver. My qustions are:
What is the right adapter type
What are the parameters to give the xml to the program
Thanks a lot
matthias

Hi Mathias,
I would suggest, generate a java proxy of ur inbound interface (reciever).
1. In the java proxy implementation method you will
have access to the message sent to the interface,
2. You could then use this message(XML) and Call ur
custom java program from the java proxy.
here is a link on how to implement java proxies
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Naveen

How to incorporate training and event management module in ess1.0

Hi all,
I am implementing ess1.0 on EP6.0, NW7.0, ecc6.0.
now in ess1.0 i could not find traing and event manag. module, but i found it in ITS version of ess.
how can i incorporate 'traing and event manag' module in ess1.0??
do i need to download two version of ess?...i doubt if its feasible!...can anybody guide me on this?
I am new to portal, and hence trying to learn thing in EP ESS...please throw in your help ASAP
Regards,
JJ

hi all,
can anybody please throw some light on the above query?
i m trying to search in forum but i am unable to find any reasonable answer to this.
Regards,
JJ

How to append calling and called number with translation rules?

Hello,
I have one question about digit manipulations.
How to append calling number and called number with IOS commands?
For example, when 123 dials 45678, translations have to be performed and the new called number to be 12345678.
Thank you,
I will vote this conversation.

It is not possible with translation rules.
However, you can do that with a TCL/IVR script.

How to dynamically call image in PDF for Acrobat ver 8.1 onwards?

Hi Experts,
I am using Web Dynpro Java. My requirement is to call the images dynamically on a PDF form. There are no of company code. I have to call different logos for different company codes/
We are now using Acrobat 8.1.1. Please refer following thread.
http://kb2.adobe.com/cps/405/kb405270.html
From Acrobat 8.*, we have to use some different method for dynamically calling the images. Earlier we were using the concept mentioned below to dynamically call images.
However this method is not applicable for Acrobat Reader 8.* onwards due to security reasons.
Click on the Layout tab and choose None for the Caption position.
u2022 Click on the Object, then the Binding tab and choose None for Default Binding.
u2022 Click on the Field tab, enter $record.SapOnlineShopUrl for the URL entry, and select Use Image Size for the Sizing field.
u2022 Click on the script editor and enter the following FormCalc script statement, which enables the dynamic integration of the image. Show: initialize Script: this.value.image.href = xfa.resolveNode(this.value.image.href).value; Language: FormCalc Run At: Client
write following code in wddoinit
try { String url = WDURLGenerator.getAbsoluteWebResourceURL( wdComponentAPI.getDeployableObjectPart(), "sap_online_shop.jpg"); wdContext.currentDataSourceElement().setSapOnlineShopUrl(url); } catch(Exception e) { throw new WDRuntimeException(e); }
Please let me know what is the alternate method for Adope ver 8.1.1
Regards,
Gary

Hi Gary,
First you upload the image in SAP through se78.then write the below code in your adobe form interface.
data : v_object type TDOBJECTGR value 'GRAPHICS',
        v_id type TDIDGR value 'BMAP',
        v_btype type TDBTYPE value 'BCOL',
        V_FIELD TYPE XSTRING.
V_NAME = 'ZW_DEVMAN_LOGO'.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = v_object " 'GRAPHICS'
p_name = v_name " Name of the logo as in se78
p_id = v_id " 'BMAP'
p_btype = v_btype " 'BCOL' ( whether the image is in color or black and white )
RECEIVING
p_bmp = v_field
EXCEPTIONS
not_found = 1
internal_error = 2
OTHERS = 3.
g_logo = v_field.
Declare g_logo as xstring in global data.
In context of the form make one graphic element with field g_logo and mime type BMP.It will work.
Regards,
Simi A M
Edited by: amsimi on Jan 26, 2011 5:30 AM

How do I call a C++ program from Java?

I've tried using Runtime.exec to call my C++ program from Java but I don't think I'm doing it correctly. Could someone explain how to properly use it? Here's what I'm trying (this is in an applet that is only going to be running on an intranet so only PCs in my LAN will be affected):
Runtime runtime=runtime.getRuntime();
Process proc =runtime.exec("mkdir C:\\Test");

What do you expect your operating system should do with a command "mkdir"? It doesn't understand this. "mkdir" is a shell command, so you need to execute the shell:
runtime.exec("cmd /c mkdir C:\\test");

How to open quotation and order form?

How to open quotation and sales order form from code behind in VB?

Hi,
On the button click event u need to execute the following code to open the required system forms,
sbo_application.ActivateMenuItem("2049") 'For sales Quotation
sbo_application.ActivateMenuItem("2050") 'For Sales Order form.
Hope it helps,
Vasu Natari.

How can i import and order photo books from older iPhoto versions?

I have made a photobook which i have not ordered at apple yet. It's on another macbook still running iphoto 07 (unable to update iphoto, because to old for Mavericks)... Somehow i can't import this album on my laptop running iphoto 9.5.1 and order it from here...
Does anyone have solution?

Read again - the word "import" does not appear in either answeer - you never ever import one iPhoto library into another one
books do not actually exist - they are simply database entries - so you have to move the entire iphoto library
1 - rename it on the source machine
2 - Connect the two Macs together (network, firewire target mode, etc) or use an external hard drive formatted Mac OS extended (journaled)
3 - drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac
4 - depress the opeion key and launch iPhoto on the new mac
5 - select the library with the book, convert it as needed and you will be ready move forward
- be sure to
Before ordering your book preview it using this method -http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
there may be differences in the book due to a new system
Spacing added for clearity in reading
LN

How can we call a C program in Labview

Hi
a) In one of our application we have to call a C progran in Labview. I am not able to call it. Can somebody help me.
b) When we call a C program ,is Labview makes block diagram for it.
Please reply
Thanking You

hi there
well, then we need more information what you mean with a "C program". are you talking about C source code, a command line executable, a high end executable with a GUI, a dll, ActiveX.... what are the parameters you have to pass? what parameters are returned from the "C program"? please post some code....
as a startup you could search the examples shipped with LV. open the example finder from the runtime menu.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!"

How can I call a C program or call a C function in my JAVA code?

Could I call a C program or a C function in my JAVA code?
somebody told me that I should define a native() method, but what should I do in this native() method?
could u give me an example?
thanks in advance.

Maybe these will give a clue:
http://java.sun.com/docs/books/tutorial/native1.1/index.html
http://java.sun.com/j2se/1.3/docs/guide/jni/

How to dynamically call and order program modules

Similar Messages

Maybe you are looking for