How to edit a instrument in Logic Pro 9

I have found a string that I want to use, but I want it to last after I release the tangent.
But I can't seem to find any mixer to edit the instrument.
Have tried to read the manual, but I don't know which section. And when I thought I found the section, I can't find the answer.
I have opened LP9, a empty project. Created a software and chose the instrument.

Did that, but the notes didn't show. But now they do. Next time I'll try to open an event list window.
Can you tell me something about fading?
In every tutorial on Youtube, the press esc and the get a lot of options. I do to. However, I only have "Fade tool" and they have "Crossfade tool". Probably nothing to care about.
But I can't fade any tracks unless I bounce the track. Why doesn't the tutorials say anything about that?
I promise you, I read, searched and listen to every advice yesterday for 4 hours. Couldn't figure the fading thing. It was just a luck I tried bounce.

Similar Messages

  • How to get oriental instrument in logic pro 9

    I have Logic Pro 9 on  Mac mini
    I want to use arabic instrument like oud, Nay etc...
    How can I get it?

    Did that, but the notes didn't show. But now they do. Next time I'll try to open an event list window.
    Can you tell me something about fading?
    In every tutorial on Youtube, the press esc and the get a lot of options. I do to. However, I only have "Fade tool" and they have "Crossfade tool". Probably nothing to care about.
    But I can't fade any tracks unless I bounce the track. Why doesn't the tutorials say anything about that?
    I promise you, I read, searched and listen to every advice yesterday for 4 hours. Couldn't figure the fading thing. It was just a luck I tried bounce.

  • How to set up external instrument in logic pro x

    how do you set up external instrument in logic pro x without triggering the instrument twice - by the external instrument GM device to control playback and playing the instrument itself?  thank you

    I use the local off method but there is another way.
    Go to Settings/MIDI and use the  "Instrument Without MIDI Thru Function" selector to pick the device and channel your hardware keyboard is transmitting on.
    Settings are on a Per Song basis, they're not global like Preferences are.

  • How to use pianoteq sounds in logic pro?

    How to use pianoteq sounds in logic pro? I've got an iMac 3.6 Ghz., intel core i5, OS 10.8.5. I want to be able to use my Bluthner piano sound (which is an add-on in pianoteq) in Logic Pro X (10.0.4).
    Thanks,
    Peter.

    Hi
    Try this in a new empty project:
    In the New Tracks box select a software instrument track, and un-check the Open Library box
    You will see a track plus the channel in the Mixer
    Click on the Input  "Inst" button, and you will see a menu like this
    Correctly installed 3rd party 64bit AU plugins will be in the AU Instruments sub-menu.
    CCT

  • How do I update/upgrade from Logic Pro 8 to 9?

    How do I update/upgrade from Logic Pro 8 to 9?

    There is no update, you have to purchase Logic 9 from the App Store, it's $199, which is close to the price of an update.
    Warning, if you do purchase Logic 9 from the App store it will download 2GB of additional patches/sounds/loops...etc. This is for first time buyers so their App Store Logic will have some basics to work with before trying to download the additional 20+GB of loop/instrument data. If you have a full installtion of Logic 8 it's possible the 2GB of data Logic initially downloads will mess with the instruments and sounds you've been using, past projects may not load properly. Just something to be aware of.

  • Where can i find the sample instruments in logic pro x.the proper plugins

    Where can i find the sample instruments in logic pro x.the proper plugins. or third party plugins too where can i find them and how in logic pro x can anyone help me please.

    My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

  • How many iMacs can i register Logic Pro on?

    How many iMacs can i register Logic Pro on?
    We use Logic Pro at our work.  We are using using 6 macs at the moment, i would like to have logic on all 6

    Hi
    Technically this is NOT the 'legal' case:
    https://discussions.apple.com/message/18228781#18228781
    CCTM wrote:
    Hi
    According to the details in this:
    http://www.apple.com/legal/itunes/uk/terms.html#SALE
    You could well be out of luck....
    MAC APP STORE PRODUCT USAGE RULES
    Except as otherwise set forth herein,
    If you are an individual acting in your personal capacity, you may download and use an application from the Mac App Store (“Mac App Store Product”) for personal, non-commercial use on any Apple-branded products running Mac OS X (“Mac Computer”) that you own or control.
    (ii) If you are a commercial enterprise or educational institution, you may download a Mac App Store Product for use by either (a) a single individual on each of the Mac Computer(s) used by that individual that you own or control, or (b) multiple individuals on a single shared Mac Computer that you own or control. For example, a single employee may use a Mac App Store Product on both the employee’s desktop Mac Computer and laptop Mac Computer, or multiple students may serially use the Mac App Store Product on a single Mac Computer located at a resource centre or library. For the sake of clarity, each Mac Computer used serially by multiple users requires a separate licence.
    (iii) Use of Mac App Store Products may require sign-in with the Apple ID used to download the Mac App Store Product from the Mac App Store. Mac App Store Products can be updated through the Mac App Store only."
    HTH???
    CCT

  • How to use Setup Assistant in Logic Pro 8?

    How to use Setup Assistant in Logic Pro 8? I can't find it! even in the User Manuel!
    Also, where can we setup the monitor number like we used to set '2 monitor ' in Logic Pro 7's setup assistant
    Thanks!

    I've been using Logic on two monitors for years. Screensets extend over all the monitors your computer sees, you can position windows on one, or the other, or size them to fit over both, so you can happily have for instance an arrange window on one monitor, and a mixer window on the other monitor, or stretch a giant arrange window over both...

  • I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

    I could really use some insight into this please also how many gigs of RAM should my power mac have it only has two right now and logic tends to glitch up majorly.

    My original question :
    I purchased a powermac pro and it came with logic Pro 9 (but with out the additional suite of programs that comes with). How can I reregister or reinstall Logic Pro 9 to get those features?

  • How do I delete locators in Logic Pro 8?

    Hi there,
    How do I delete locators in Logic Pro 8?
    It seems I created them mistakenly, now I cannot delete them.  I don't want to use them and
    I don't need to cycle anything.  I'm trying to set markers accurately to timecode on a video,
    but it seems the locators are preventing me from doing so?!!  I'm trying to match accurately
    to the timecode frame and when I reach the unwanted locator it prevents me from moving
    up a frame to the frame I want.
    Thanks
    Simon

    You can easily move locaters by dragging them. You disable them by turning off cycle mode in the transport bar. They are always there but when disabled should not be a problem.

  • Support needed to install komplete instrument in logic pro x

    Hello
    I recently bought logic pro x. I also bought komplete 10 ultimate and komplete instrument s61. As expected both these are getting detected by the audio unit manager and it's also showing as compatible. But when I try to install komplete instrument in logic pro as per the directions given by native instruments support page, I cannot find the komplete instrument option in the menu under the au instrument option in the channel strip. Any help is welcome. Thank you

    There is no Komplete Instrument under the AU Instruments section..
    Instead.. in the AU Instrument section... Look under Native Instruments and each part of Komplete, like Kontakt for example, will show up there...
    This is assuming you have run NI's Service Center once to register and authorize the plugins
    Now for the Komplete S61 Instrument which is a hardware Midi controller.... you need to setup things in OS X's Audio/Midi Utility as per NI's instructions for that device...
    Then it's plugin should show up under the Native Instruments entry under AU Instruments...
    For further information and help, contact NI's support....
    http://www.native-instruments.com/en/support/

  • How do I get more instruments in Logic Pro?

    When I was installing Logic Pro 9, I think it offered me to download extra instruments...I clicked ''no'' or something like that. I'd like to get those instruments now so I was wondering in anyone could help me. I think this is why my brother has more instruments than me...

    Logic Pro/Download Additional Content--this will bring up a dialog box which shows what you have installed and what is available for download.

  • How do I record multiple midi instruments in Logic Pro simultaneously on separate tracks?sim

    Hi. I am trying to record multiple midi instruments simultaneously into Logic Pro 9 through a MOTU USB Fas Lane so that it is similar to recording a live band.
    Essentially:
    Track 1: Midi Keyboard - Motu Fast Lane Input A - Logic Pro - Software Instrument (Absynth)
    Track 2: Midi Drum Kit - Motu Fast Lane Input B - Logic Pro - Software Instrument (Battery)
    Neither Midi device can be set to a separate channel.
    I would have thought this was a really common application (recoding from multiple live midi sources like a band would normally do) yet it seems unnecessarily complicated.
    I gather what I would have to do involves:
    1) Going into the Environment.
    2) Creating a Physical Input
    3) Creating a Sequencer Input
    4) Placing a transofrmer between the Physical Input and the Sequencer Input
    Where to go ffrom there I have not got a clue!
    Any help would be appreciated.
    Incidentally I would also like to record two audio tracks at the same time as the midi track, but hoepfully that does not complicate things further.
    Thanks,
    Luke

    I have it set to Performance mode which according to the owners manual: "This mode makes the XP-30 function as a multitimbral sound
    source, and Performance settings can be modified. If you’re
    using an external MIDI device to control the XP-30 in this
    mode, it will function as a multitimbral sound source."

  • How to set up headphone mix logic pro x

    Trying to figure out how to set up headphone mix in Logic Pro X but cannot get stereo sends.

    Maybe this will help, in Logic Pro 9 there was a box under preferences/audio called universal track mode. If you unchecked this box then when settng a send or creating a aux track you had the ability to select mono or stereo busses. Logic Pro X doesn't seem to have this. So when creating a aux channel with output stereo 5-6 I can't select stereo thus I can't create sens to the left or right side of this aux channel for headphone mixes. In Logic Pro 9 I can create a stereo aux channel with bus 1-2 output 5-6 (to headphone amp) I can then use sends to send musical instrument to bus 1 (left side) and vocals to bus 2 (right side). I hope this helps I just want to know if this function is still in Logic Pro x or we have to go back to OLD SCHOOL way of doing this.
    Thanks

  • How to Convert from Notator to Logic Pro

    In the 90's the precursor to Logic was called Notator. In the Arrange page you could place Verses and Choruses in any order you wanted to place them, which included changing the keys of any verse or chorus collectively or separately.  Slick.
    I've opened an old song from Notator into Logic Pro, does anyone have any ideas how to change the key of each arrange page without changing each instrument on each page separately……..
    ecky thump!  this is more than a bit frustrating
    Thanks in Advance
    BT

    Global Ttracks ?
    Just a wild guess.
    Cheers!

Maybe you are looking for

  • Battery will not charge. and other issues

    Well i'm working on a friend of mines notebook, its a n100 model 0768 12u running windows xp. This is the situation so far. First his hard drive had fried so i replaced that and put the o.s. back on it,but now the battery will not charge. also the wi

  • DB13 scheduled backups getting failed

    Hello Experts, Till sometime back our backups were working fine. But recently it started getting failed. I have checked the RFC connection SAPXPG_DBDEST_PRODORADB. RFC connection test is throwing the following error. Logon Connection Error Error Deta

  • Create Favourate for table content

    Hi, Jdev 11.1.1.5.0 I've created a tree structure from a single DB table using self-reference. I can select the required nodes from this tree and clcik on command button, then will display a table with the selected nodes information. Till this part,

  • Serious probl;ems getting around this blackberry curve 8520 ??

    My Blackberry has started to turn my photo and video files into a rem file ??? with this file ext jpg.rem - I cannot open these files with anmy software that i have or can find ! I do not want my files to be names rem files - i want all files to be n

  • A simple Q about package, import and classpath

    Hi! Could You help me! Where's the problem? dir is C:\Omat tiedostot\Pasin Kansio\Et�lukio\eph200, sub dirs are datat, javat (java-files) and luokat (classes), file kaanna.bat is "set classpath=C:\Omat tiedostot\Pasin Kansio\Et�lukio\eph200 del luoka