How to edit a path and its text wrap of zero simultaneously?

When I try to select a point on a polygon - with a Text Wrap of zero - I merely select a point on the Text Wrap instead. The Text Wrap path appears to be above the polygon path to which it is attached. How do I select an actual polygon point?
The larger problem is editing a polygon (point or points) and the Text Wrap simultaneously - rather than the two paths acting independently.
At the moment, I have to switch the Text Wrap off, edit the shape, then switch the Text Wrap of zero back on. Surely, the most common use of Text Wraps on polygons is to push text away from a polygon that follows the outline of an image - why, therefore, is it default that you can move a Text Wrap point(s) without moving the parent point(s) on the polygon – and vice versa – at once? How can they be connected so when one moves, the other moves?

For me - in CS6 - the Text Wrap path can behave as though it is above the polygon path which is frustrating if the Text Wrap is set to Zero. Though it is irregular......
Try this ...polygon with Text Wrap of Zero - nothing selected - select a point - move the point - works! (in that the polygon path moves and the Text Wrap path moves with it) - but then (without de-selecting the polygon) - select a different point - move the point - only the Text Wrap has been moved and, from then on, the polygon and Text Wrap are disconnected (unless the whole thing is selected).
I realise if the Text Wrap is set to something other than Zero, this is not an issue as the two paths are easily distinguished and, unless you deliberately choose a Text Wrap path point and adjust it, the two paths remain happily connected, but having it set to Zero gives me the most precise control. At the moment, I switch Text Wrap off and on repeatedly whilst adjusting the polygon otherwise I end up with lots of wires everywhere. I think it should be harder to disconnect a Text Wrap from its parent polygon - not sure why anyone would want to disconnect the two in any case!

Similar Messages

How do I edit the font and bold text in the message box in adobe send before sending to client?

How do I edit the font and bold text in the message box in adobe send before sending to client?

Hi BRAEWOOD DEVELOPMENTS,
You can edit the Subject & Message when you've selected Send Personalized Invitations (though you can't change the font or style of the text).
Best,
Sara

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

Material Characterstic values and its text

HI,
I need material Characterstic values and its texts
CABN Characteristic Detail
AUSP Characteristic Values
CAWN Characteristic Values
CAWNT Characteristic Value Texts
KSML Characteristic Allocation to Class
But my AUSP table dont have all material numbers which i need to give the condition ausp-OBJNUM = mara-matnr and my mara-atinn filed also blank to fetch the values directly.
But the CABN,CAWN,CAWNT holds the data
Any new inputs and conditions other than these
Regards
Rashed

Hi,
You need to search the object number in INOB(Link between Internal Number and Object) table first then you will get the record from AUSP.
In INOB you can put the material number in objek field
sample attached
MANDT CUOBJ KLART OBTAB OBJEK
013 000000000000021515 001 MARA 000000000000905030
Hopefully It should solve your probelm.
Regards,
Atul

When importing images in Pages, how do I set the default object placement to "stay on page" and "no text wrap"?

when importing images in Pages, how do I set the default object placement to "stay on page" and "no text wrap"?

Then use a Layout template.
I am a designer and I use Word Processing templates with layout breaks and all the other tools available because Layout templates are just WP templates with a lot of options removed.
Pages is not Indesign, but then Indesign is not Pages, …and Pages 5 is not Pages '09.
Unless your flyers are for the Web, why are you using Pages at all?
I am curious, what does your post have to do with the O.P.'s question? …and why are you posting it here?
Peter

How to retrieve the path and the name of the destination file in a link annotation

Hi,
In C++:
How to retrieve the path and the name of the destination file in a link annotation and a Launch action.
Sample of my code:
//Determine if the annotation is a Link annotation
if (PDAnnotGetSubtype(annot) == ASAtomFromString("Link")) {
//Determine if the action is a Launch action
if (PDActionGetSubtype(action) == ASAtomFromString("Launch")) {
// What is the method ?
Regards
David G

In general, get the annotation as a Cos object and examine it, in
accordance with the PDF Reference.
Aandi Inston

Clipping paths and coloring text

So I'm putting a brochure together in InDesign and I'm trying to create an effect that I believe could be done easily with a clipping mask as I understand them to work in Illustrator. But this is not working like I hoped. The basic idea is that I'm taking a text box and wanting to create a mask around a specific section of the text so that it cuts through different characters. However, the text box will retains its properties and the text is fitted to the new box. How can I create a mask that doesn't change the shape?
Specifically what I'm trying to do is have an unusual portion of text a different color to fit with the color scheme of the background. Right now the text and background have the same color a certain area and I want to have that areas text a different color. It cuts through the characters at odd angles so I can't gerry-rig something. Perhaps theres a better way than a clipping path?

Here is what I'm trying to acheive. I can do it in Illustrator but I need InDesign to make this brochure. The color scheme is generally the same. I'm trying to use specific colors aswell. I'm not sure how to get exact CMYK values with blending modes. Also the blending would have to only effect the text and not the background color. It was something I tried but couldn't get the result I was going for. Now I realized I had wrong terminology and this might help clarify. I made a clipping mask in Il which masks out an area. I think think in ID it's a clipping path which creates a new path (causing the text to fit to the path) around the text. Hopefully this sheds more light on my conundrum and perhaps someone knows a way?

How do I get picture in picture video + moving animation? + How do edit a clip and store the edit in the library?

How can I have picture in picture video
I want to take one video, make it smaller and then have it play on top of another video
+ How do I control its precise position?
How do I trim and edit a clip and save that clip?
I've been through the manual, I'm sure I read it, but cant remember
How do I have sliding in graphics for me video?
After xx seconds on my video, I wanted a thin strip to slide accross the bottom of the video half way
Then I wanted 4 graphics to slide onto this white line
How do I do this?
Thanks
Omar

For the first question: place one video on top of the other, as a connected clip. Change the size and position as you wish.
You have many questions that suggest you are very unfamiliar with the application. I think you'd be well served by going through a few online tutorials. All the things you ask are easy and fun to do in FCP X. It is best to learn by seeing it done. Look at rippletraining.com, izzyvideo.com, and others. I am sure you'll find that it will be time well spent.

How to create a black and white text clip?

I'm using pro Cs4 and was wondering how do I create a black and white text clip? When I used Vegas there was a clip I could put in, and simply write whatever I needed.
Still getting used to Pro Cs4 and was wondering if anybody can help me.
Thanks!

Do you wish to have a black field w/ white text, over part of an existing Video Clip, or do you want just a black field w/ white text and not have any Video showing through?
For the latter, just do a Title in Titler, w/ white text, and place that on the Timeline.
For the former, let us know the exact details, as that is slightly different.
Good luck,
Hunt
[Edit] as a little background, when in Titler, you will see a "black" background, but that is really Transparent. However, if placed on the Timeline, with nothing below it, it will show black.
Message was edited by: Bill Hunt - Added [Edit]

How to extract a folder (and its contents) from inside a zip file?

There is a zip file which contains a folder inside it. The folder itself contains a few files. I would need to know how to extract the folder (with its contents) from inside a zip file.
I have found a few unzipping code samples which show how to handle a folder inside a zip file. An example is shown below:
public static void extract(String workingDirectory, byte[] zipFile)
throws Exception {
ByteArrayInputStream byteStream = new ByteArrayInputStream(zipFile);
ByteArrayOutputStream out = new ByteArrayOutputStream();
ZipInputStream zipStream = new ZipInputStream(byteStream);
ZipEntry zipEntry = null;
String nameZipEntry = null;
byte[] contentZiphttp://forum.java.sun.com/post!default.jspa?forumID=31#
Click for code tagsEntry = null;
boolean isDirectory = false;
int indexFileSeparator = -1;
String directory = null;
String fileName = null;
while ( (zipEntry = zipStream.getNextEntry()) != null )
            nameZipEntry = workingDirectory + File.separator + zipEntry.getName();
            isDirectory = zipEntry.isDirectory();
            if (isDirectory) {
File file = new File(nameZipEntry);
file.mkdirs();
            else
                // read zipEntry
                byte[] buf = new byte[1024];
                int c = 0;
                while ( (c = zipStream.read(buf)) != -1)
                    out.write(buf, 0, c);
                indexFileSeparator = nameZipEntry.lastIndexOf(File.separator);
                directory = nameZipEntry.substring(0, indexFileSeparator);
                fileName = nameZipEntry.substring(indexFileSeparator+1,nameZipEntry.length());
                FileSystemTools.createFile(directory, fileName, out);
                out.reset();
                zipStream.closeEntry();
        zipStream.close();
        byteStream.close();
}The code sample which deals with the part where the zipEntry is a directory creates a directory with the same path and name. (highlighted in bold)
Another similar variation is:
File file = new File(dirDestiny.getAbsolutePath() + File.separator + zipEntry.getName() );
if(zipEntry.isDirectory())
      file.mkdirs();When the code creates a directory for the folder, does it unzip the contents inside the folder as well?
If not, how do I extract the files inside the folder?

Have you already tried to see if the sample code you downloaded works or not? Maybe if you try out the code yourself you can see if it extracts files from a directory within a zip file?
I like to use pkzip. It is a command line compression/uncompression tool that can be used from a batch file. If you assignment involves unzipping large amount of zip files on a regular basis, I recommend taking a look at pkzip.

How to align output formatted and output text in the same line?

Hi All,
I want an output formatted label and a text on the same line,. I've surrounded these components wth a panel form layout and they automatically align one below the other. how do I kepe them in the same line?
Thanks.

Try as per the code snippet below:
<af:document title="TestPage.jspx" id="d1">
<af:messages id="m1" inline="true"/>
<af:form id="f1">
*<af:panelGroupLayout id="pgl1" layout="horizontal">*
*<af:outputFormatted value="outputFormatted1" id="of1"/>*
*<h:outputText value="outputText1" id="ot1"/>*
*</af:panelGroupLayout>*
</af:form>
</af:document>
Thanks,
Navaneeth

How to get the table_name and its count(*) in a SQL

Hi,
Can anybody tell me how to write a sql to get the table_name and its count(*) in a SQL:
Output should be:
table_name count(*)
XXX 261723
YYY 3343
Regards,
G. Rajakumar.

hello
there r a lot ways
i'll suggest u two of them
1) the following dynamic sql procedure
DECLARE
TYPE array_type IS TABLE OF VARCHAR(30);
TYPE cur_typ IS REF CURSOR;
c1 cur_typ;
count1 integer;
tab_arr array_type;
querystr varchar2(200);
begin
SELECT table_name bulk collect into tab_arr FROM sys.all_all_tables ;
FOR I IN tab_arr.first..tab_arr.last LOOP
DBMS_OUTPUT.PUT(TAB_ARR(I));
querystr := 'select count(*) from ' ||TAB_ARR(I);
open c1 for querystr;
fetch c1 into count1;
EXIT WHEN c1%NOTFOUND;
dbms_output.put_line(count1);
END LOOP;
close c1;
END;
2) or use ANALYZE to analyze the tables and get the number of rows in the NUM_ROW column of DBA_TABLES view.
if u still have any problem mail me at [email protected]
shalini

How to fetch Junk values and its columns dynamically

Hello,
Can anyone help me in writing a procedure/dynamic SQL to fetch the column where the junk values appears and its value. Eg: If emp table contains ID and Name columns, and ID column contains junk values, the result should be the Id column and the junk value/s. It should be dynamic because next time if the other column contains junk values(like $,%...), the query should display the other column too..
Thanks in advance..

Can anyone help me in writing a procedure/dynamic SQL to fetch the column where the junk values appears and its value. Eg: If emp table contains ID and Name columns, and ID column contains junk values, the result should be the Id column and the junk value/s. It should be dynamic because next time if the other column contains junk values(like $,%...), the query should display the other column too..1. define "junk" values.
2. usually it does not matter what values are in ID, because it is used internally by application, to maintain uniqueness or relations, not having any semantical meaning. End users usually should not see IDs, such IDs are generated automatically. There is no need to cleanse them from "junk" values.
3. If you made a typo, and you are looking for "junk" values in Name column, it is a different story. You can use TRANSLATE to search such values, as already advised, translating all "junk" characters to one "junk" character and searching for the latter.
select id, name from T where translate(name,'?@#$%^<>','~~~~~~~~~') like '%~%';
Edited by: Mark Malakanov (user11181920) on Jan 4, 2013 11:40 AM

How to find custom parameters and its values?

Hi,
Please let me know how to find the list of custom parameters with its possible values and its use in programs?
Thanks.

There is no validation for the values that can be input so you can put anything in the value field. For example, try "BUK" and
then a value for a company code you know does not exist.
When you run a transaction with that it will default that value.

How to Edit Titles, Transitions, and Music in a Copy of an iMovie Project?

23 December 2009
Dear Mac Users:
Happy Holidays! I am writing to find out how to edit a copy of an iMovie project. A friend made an
iMovie (project) on his MacBook Pro and sent it to me as an MPEG4 video file. I opened that MPEG4 video file in iMovie on my MacBook Pro and dragged it into a new project in my Project Library--we
are both using iMovie '09.
Is there any way that I can view the title, transition, and music buttons/icons/markers that my friend used to create this particular iMovie project so that I can select them and make changes to the titles, transitions, and music? Primarily, I want to change the titles in this particular iMovie project, but do not see the buttons/icons/markers that are associated with the original iMovie project that my friend created. Is there any way that I can make changes to the titles and transitions that appear in this project on my computer?
SIncerely,
Corey

*24 December 2009*
*Dear Mac Users:*
Hello. Thanks to AppleMan1958 for answering my question about how to edit an iMovie project
on another computer.
Here is a question related to the process of transferring the iMovie '09 project file from my friend's
computer to an external drive so that I can edit that project in iMovie '09 on my MacBook Pro:
How do I know if my Smart Disk FireLite portable external drive is formatted to MAC OS X Extended (journaled)? How I do format this Smart Disk FireLite USBFLB80C to MAC OS X Extended (journaled)?
When I connect the Smart Disk FireLite to my MacBook Pro via USB, open iMovie '09, and select View
Events By Disk or rather "Group Events By Disk," an icon for the FireLite external drive appears, but there is a yellow triangle with a black exclamation mark on the icon for the external drive. What does this "warning" mean? There are MP3s of music on the same external drive and they open just fine in iTunes. The one iMovie project file that is already on the drive will not open up in iMovie.
So, how do I properly format this external drive in order to transfer an iMovie project file from my friend's computer so that I can edit it on my MacBook Pro using iMovie '09?
Sincerely,
Corey

How to edit a path and its text wrap of zero simultaneously?

Similar Messages

Maybe you are looking for