How to edit a shared file on my Mac?

Hi,
Is it possible to edit a shared file on my Mac?
I know it is possible on the web, using Numbers/Pages/Keynote for iCloud Beta. But I was wondering if it is also possible to download and edit the file.
I think it is also important that the file automatically updates himself when edited on the Mac, so the other user could see my changes.
So I don't have to download the file --> edit it --> upload the file.
Hopefully there is a solution for this problem, otherwise I'm hoping this will come in the near-future!
Kind regards,
Berend

challenged2012 wrote:
How do I use a flash drive on my mac
Since most flash drives are formatted for PC's rather than Macs, if you plan to use it only with a Mac, when it's plugged in, you can click on it in Disk Utility and partition it GUID and Mac OS Extended (Journaled). Note that if you've already got files stored on it, partitioning it will erase them.

Similar Messages

  • Hi I need help ..I do not know how to edit a pdf file that I scanned in,

    Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

    What program are you using?  If it is just Adobe Reader you can not edit.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • How to edit the nbu file when the mobile device is...

    How to edit the nbu file when the mobile device is not connected?
    That software that is available in the nokia site “nokia phone browser” is not useful! Why?
    It is not working unless the mobile device is connected (attached)
    It is quite slow when editing the contacts! (attached)
    Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
    Is there some workaround in this regard?
    Is there some software the can edit the nbu files?
    Thank you for the help,
    Best
    Jamal
    Attachments:
    Clip_774.jpg ‏166 KB
    Clip_775.jpg ‏127 KB
    Clip_773.jpg ‏243 KB

    when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
    Merry Chrasmas too ;-)

  • How to edit move rename files in iTunes

    how to edit move rename files in itunes

    I don't like iTunes.
    I don't want iTunes to keep the physical location of my files because they can be on a SD card, or an USB drive and i don't want iTunes to stop me from playing a song because it cannot find it anymore.
    So i would like to use physical files just to upload to iTunes Match and then delete the link to the physical file.
    If needed, iTunes Match will download the file.
    The problem is just that i would like to delete all references to physical files to make iTunes Match download the file only when needed and stop using the first version i had given to it
    maybe i could have a Apple Script to check if there is a physical file referenced and if so delete it to have only the Cloud version     

  • How can I transmit PDF files from my Mac to my iPad, How can I transmit PDF files from my Mac to my iPad

    How can I transmit PDF files from my Mac to my iPad, How can I transmit PDF files from my Mac to my iPad

    Yes you can definitely do this. You'll need an app on the iPad that handles PDF viewing and editing. There are many around - two of the best I've seen are GoodReader and PDF Expert.
    In iTunes when you iPad is connected to your PC, go to the Apps tab and scroll down and you'll see the File Sharing section. You can drag files to there to share them to your iPad.
    You could also look at online file sync services like PDF to ePub Maker if you prefer not to have to connect your iPad to a PC

  • I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edi

    I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edit the file, but when i open AE, it still the old same keys.
    How to have this working? And why until now, we don't have a GUI for shortcuts?
    I use the Apple Wireless Keyboard, and need to change the preview keys to a suitable ones, because this keyboard don't have the num pad.
    Until CS6, i was using ? and Shift+?, in the place of some kind of Zoom.
    But this time, i edit the file, in a sort of way i tried, and non of then change at all.
    WE NEED A GUI in AE Preferences to CHANGE THE SHORTCUTS!
    Thank You!

    The best way to add a +1 would be for everyone to file a feature request. Those are officially tracked by Adobe (unlike this user-to-user forum) and the more people that ask for something, the more likely it is to be implemented.

  • How can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    how can i convert video files from my mac to watch them on my iphone?, how can i convert video files to watch them on my iphone?

    Turns out the answer to that question changes if you ask it more than 4 times, so ask it again....
    The answer depends on the type of video files you want to convert.  If they are DRM protected commercial videos, no help can be given here.  Google.

  • How can i recover deleted files from my mac book

    how can i recover deleted files from my mac book

    Check out software like Data Rescue 3 (and you need an external drive to recover to)

  • How can I delete the files .DS_store in Mac OS Yosemite?

    How can I delete the files .DS_store in Mac OS Yosemite?

    The .DS_Store file is normal. It holds certain settings related to the folder it is found in. Removing these files is futile, as they will come back, as you have observed.
    If you are seeing them on your Mac, that means you have changed settings so that your Mac is showing invisible files in the Finder. To reverse that, run the following command in the Terminal:
    defaults write com.apple.finder AppleShowAllFiles NO
    This will hide them, and any other invisible files, from view.
    If you are seeing them on a Windows machine, just ignore them. They're not doing any harm.
    If you found a Terminal command that is supposed to stop them from being created, I would be extremely skeptical as to the wisdom of running it.

  • HT204382 how can I transfer wma files to my mac?

    how can I transfer wma files to my mac?

    A Macintosh Classic (http://support.apple.com/kb/sp198) has a SCSI hard drive. Even though the hard drive can be removed and placed in an external SCSI enclosure, it is not going to be easy to find a way of connecting it to a modern Mac. That would normally require a USB-to-SCSI adapter, which may or may not be supported under the latest operating system versions.
    The easiest method of transferring files from a Macintosh Classic may be via an external USB floppy drive connected to the modern Mac. 1.44 MB Mac-formatted floppy disks can be used for such transfers (not 800K).
    A SCSI Zip (100) drive could in principle be connected to the SCSI port of the Macintosh Classic. The Zip disk could then be moved to a USB Zip (100) drive connected to a modern computer.
    The Macintosh Classic does not have built-in Ethernet, nor a slot for an Ethernet card (certain other "classic" Macintosh computers do have the ability to hold an Ethernet card). There are some external solutions (such as SCSI-to-Ethernet adapters), but with limitations. For a networking overview, the http://www.applefool.com/se30/ web page could perhaps be of interest.
    It is also possible to arrange a null-modem connection between a Macintosh Classic and a modern computer, providing that a USB-to-serial adapter is attached to the latter (appropriate terminal emulation programs are needed on both sides).
    Jan

  • HT2506 How to view a .tif file in a MAC

    How to view a .tif file in a MAC.
    I cand find an MDi convertor for a MAC Pro.  Please advise.

    Problem solved.  I went to cnet.com and searched for "postscript viewer."  The top item in the search results was "Postscript Viewer" from a company called Rampant Logic.  It works great, and is free.
    Sam Cohen
    Executive VP and CEO, Pro-Gun New Hampshire --> www.PGNH.org
    .....RKBA!..... (the exclamation point means "Shall Not Be Infringed!")

  • How do I open .exe files on my mac?

    How do I open .exe files on my mac? I've downloaded a bunch of programs but they are all in .exe format. Do I need a program to extract these files?
    Thanks,

    nps0045 wrote:
    Ok thanks. So how do you install programs that you download from the internet? I've downloaded some programs and when I try to install them it doesn't work.
    First of all, you need to download things that are built to run on OS X - there is no way to install any Windows program in OS X.  You need windows to run Windows programs.
    Most downloadable programs for OS X will be distributed in a Disc Image file - *.dmg  You would double click one to open it.  Then, often it is as simple as drag the uncompressed folder to your Applications Folder.  Sometimes there may be an installer to run.  Once installed, you can eject the mounted dmg (drag it to the trash) and either keep is in case you ever need to reinstall, or delete it.

  • How do I compress a file on a Mac.  I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

    How do I compress a file on a Mac.  I do not see and option to compress a file when I right click on it and the Apple help does not provide and accurate answer

    Select the file with one click, then go to File in the menu bar and select Compress...
    By the way Niel's post says control - click. This means click with the control key held down. It produces the same result as going to File in the menu bar and selecting Compress...

  • How do I read wmv files on my mac

    how do i read wmv files on my mac. Is there a safe/secure download i can use

    Use the free version of Flip4Mac. If those WMV files contain DRM, you don't.
    (64098)

  • How to Edit a flash file

    Hi all,
    I have a flash file, which I took from my website and want to
    modify some of the contents and links in the flash file. I
    installed "Macromedia Flash 8" and open the flash file; after
    opening all I can see in the menu bar of my flash is "File, View,
    Debug and Control" and could not find any control or tool to edit
    the file and surprisingly rest of the other macromedia toolbar
    icons are disabled. I need to know from where to start - How to
    modify my flash file.
    Your help is highly appreciated.
    Thanks in advance
    AP

    quote:
    Originally posted by:
    Purplehaze
    Also the file I am having trouble with is from a Template
    that I got from my Host it is suppose to be made to be edited I
    have both the files. I would still need the decompiler?
    I do not know what files you have, 'fraid I cannot answer
    this
    My Friend
    I think you need to check out some of the books, online
    tutorials, course etc pertaining to Flash. Build up your knowledge
    a little at a time and you will surprise yourself at what you can
    achieve, you would also probaby build your own web apps and not
    rely on templates.
    There are many good folk on here that would help you with
    your projects - go out and explore it - it's exciting - good luck

Maybe you are looking for

  • Error publishing reports from BW

    Hi, I am facing some issues while publishing reports from BW system. I have taken care of all the settings mentioned in Integration Kit guide. We are using BOXI 3.1 SP3  OS:windows 2008 (64-bit) The error that we are getting is: "0000000001 An error

  • IPhone 6 pre order delivery

    Hi everyone, I pre-ordered my iPhone 6 on (Sept 12th at 11:30PM) that is almost 24 hours after pre ordering opened up. During the checkout time, my estimated delivery was Oct 1 - Oct 6 and this is the same date shown on my order confirmatione email.

  • File Content Conversion some fields are missing

    Hello Friends, I am trying to convert a fixed length flat file to XML. Here are my parameters CompanyCodeRecord.fieldNames = field1,field2,....field50 CompanyCodeRecord.fieldFixedLengths = 1,4,15,20...,50 (for all 50 fields) CompanyCodeRecord.process

  • Calling a java application from j2ee web application

    Hi, I have a j2ee application in which i am making a call to a jar file which is a java application. Runtime a4 = Runtime.getRuntime(); Runtime a = Runtime.getRuntime(); String cmd[] = new String[14]; cmd[0] = "cmd"; cmd[1] = "/c"; cmd[2] = "start";

  • PKGBUILD source conflict problem [solved]

    I'm making a PKGBUILD for a game called noiz2sa.  The problem is, it comes in two separate pieces - one is the binary and the other is some extra files and when extracted they both have the same name - noiz2sa.  Because of this, when I put the both i