How to edit a SWF file

Hello,
I'm a newbie so please try to help me with a simple solution.
I have a flash banner that is designed to run animation
continuously, I need it to stop running after 15 seconds. What's
the easiest way to do so?
This is very important for me so I'd appreciate a swift
reply.
Thanks.

quote:
You consider everybody, who wishes to edit SWF and has no
FLA, as a stealers. You're not right
I hope you aren't implying that statement coming from me. I
said nothing to that effect. Why would you even be reading a post 2
months old? I'm sure the answer was either found or the post is no
longer relative.
quote:
Many of such people are pretty legal owners of the Flash
contents, they want to modify.
Legal or not, if an advertiser requested a swf file to stop
after so many seconds, why not either provide someone the flash
file in order to be able to do it, or have the originator do it
themselves? I am/was not questioning the legality of this
alteration, but was questioning the fact of why the flash file was
not provided to pascalinam and/or why he was attempting to alter
something that could easily be done by the originator.

Similar Messages

How can I associat ".swf" files with flashlite 2.1

How can I associate ".swf" files with flashlite 2.1? When I
install flash lite 2.0,it can do ---- click .swf files system can
autoly use flashlite to play.But now I install flashlite 2.1,it
lost this ability return as "unknow files formate".
Now,how can I reassociate ".swf" with flashlite 2.1?
first: I must use flashlite 2.1.
second:I must click .swf file directly.
I know another way to open :open the player and then find the
.swf,and open it. But ,unfortunately,I can not use this way to
open.Now I will be looking for another way.

unfortunately, the 2.1 developer edition you have installed
has not overwritten the original version integrated into the
symbian OS by the manufacturer. This means that the only way to
open the 2.1 files is to open the 2.1 player from your apps menuu,
and click on the swf file. You will only get direct access if the
updated player is in a firmware update for you handset.
Matt
http://www.outside-media.co.uk/blog

How to create the SWF file which was included surrogate pairs.

I would like to make sure how to create the SWF file which are included surrogate pairs.
The error of outside the scope of unicode occurred when I compiled(mxmlc) the as file which was set surrogate pairs to 'Unicoderange'.
Ex, I set the ' '(UTF-16 is '20B9F') to 'Unicoderange'.
However, I cannot add the surrogate pairs.
The error of outside the scope of Unicode occurred when I compiled the AS file.
The reason of error was that the Unicode(UTF-16) of surrogate pairs is invalid.
Then, I read the following pages.
These pages are written that unicode-range supported surrogate pairs.
http://livedocs.adobe.com/flex/3/html/help.html?content=fonts_07.html
http://www.w3.org/TR/1998/REC-CSS2-19980512/fonts.html#descdef-unicode -range
So please let me know how to create the SWF file which are included surrogate pairs.
Environment
- Flex3.5a
- TTC: meiryo(ver6.02), msgothic(ver2.50), mspgothic(ver2.50)
Thanks,
Takeshi Ishihara.

I've been able to create project jar files in Eclipse by selecting Export from the File menu, then choose Java - Jar file - and provide the required information, name, destination folder etc. But when I do this, I do not export other jars on the build path this way nor do I expect to do this. I am only concerned with creating a jar file of my own work. A jar file does not "contain" other jar files. If the jar file contains the main method, and requires other jars for it's execution, then you may wish to include a reference to required jars on the class path entry of the Manifest file of the jar file you create. I'm not sure how to create a Manifest file in eclipse though..

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How to Preloading a swf file in one application

hello friends,
How to preload a swf file in one application??
i have two panel in one panel i given login screen and In second panel there is one module i have to show this panel which is visible="false" when user logged in but i have to preload this module in second panel when the user is doing logi. and when user logged in that time i have to show the second panel hiding the first panel.
so how to do this i m not getting can anyone help me??
Thanking you,
Gajanan

i have created a jar file.Now i want to reuse this
jar file in another java program.Could anyone please
guide me with the steps of how to reuse a jar fileput your jar file in class path and import the class which u want to reuse in your code so that u can access all the methods in that class in ur code.

Editing a swf file with Adobe Flash cc or Dreamweaver

Hi,
I have a .swf file which is embedded in to a html file, I need to make changes in the swf section of the file which Dreamweaver can not help me with it.
I tried to click on the swf file and take it to Flash cc, but still I can not edit and make changes.
If I dont have the fla files, I can not edit the .swf file at all?
I have all the applications of the creative cloud but couldnt find any of them helpful in this matter.
Is there any help?
Thanks,

I have no experience with any decompilers beyond possibly attempting to trial one once. The only one I have seen recommended is made by Sothink.
Here is a link to a page with a tool that has an interface you can use to determine various properties of an swf file, including the Actionscript version.
http://blog.sitedaniel.com/2009/11/swf-info-width-height-swf-version-actionscript-version- framerate/

How to edit the nbu file when the mobile device is...

How to edit the nbu file when the mobile device is not connected?
That software that is available in the nokia site “nokia phone browser” is not useful! Why?
It is not working unless the mobile device is connected (attached)
It is quite slow when editing the contacts! (attached)
Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
Is there some workaround in this regard?
Is there some software the can edit the nbu files?
Thank you for the help,
Best
Jamal
Attachments:
Clip_774.jpg ‏166 KB
Clip_775.jpg ‏127 KB
Clip_773.jpg ‏243 KB

when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
Merry Chrasmas too ;-)

How to edit move rename files in iTunes

how to edit move rename files in itunes

I don't like iTunes.
I don't want iTunes to keep the physical location of my files because they can be on a SD card, or an USB drive and i don't want iTunes to stop me from playing a song because it cannot find it anymore.
So i would like to use physical files just to upload to iTunes Match and then delete the link to the physical file.
If needed, iTunes Match will download the file.
The problem is just that i would like to delete all references to physical files to make iTunes Match download the file only when needed and stop using the first version i had given to it
maybe i could have a Apple Script to check if there is a physical file referenced and if so delete it to have only the Cloud version

When do you think a preloader is necessary? How large should a swf file be to justify it?

I'm looking for opinions on preloaders. When do you use a preloader? How large must a swf file be before you to put a preloader in it? I am working on a small program that is 80kb in size right now and I'm not sure if I should add a preloader.

About 500kb, you should use a preloader.
Below? It depends on your file. If everything is on frame 1 , maybe it's better to use one.
You can test it with "Simulate Download" (Control - Test Scene -> View - Simulate Download)

How can I convert .swf file to exe file?

thanks

Hi
Thank for your choise.
If showing only white screen, please download the lastest version, v2.03.
http://www.bullrushsoft.com/download.html
This problem occurs in Win7 sp1, especially IE has been upgraded to v10.
Our SWF to EXE Converter must need the FlashPlayer plugin for IE, it 's not a atandalone program.
So it only 880KB.
Our online converter is the adobe flash player exe, it can be embed the swf into, and standalone, so its size > 4MB.
More details, please visit http://www.bullrushsoft.com/online.html
Best Regards.
2013-08-11
Bullrushsoft Support Team
From: mmshahid73
Date: 2013-08-11 02:52:01
To: Sandro_brs
Cc:
Subject: _How_can_I_convert_.swf fileto_exe_file?
Re: How can I convert .swf file to exe file?
created by mmshahid73 in Flash Ad Development - View the full discussion
Hi, I used bullrushsoft SWF to EXE converter, but the created EXE file showing only white screen, i think i need to add flash player also but i don't know how to add flash player duriing swf to exe conversion.
Because when i converted swf into exe from my pc, it showing size 880 KB where swf file size is 413 KB, onthe other hand, I convert the same online which is playing correctly but the converted file size is 4.57 MB.
Am i right?
Kindly help
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5583680#5583680
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5583680#5583680
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5583680#5583680. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Flash Ad Development by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Edit a SWF file from Dreamweaver in Flash

This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WSc78c5058ca073340dcda9110b1f693f21-7acf. html

If you've created the FLA file then rendered the SWF, you can locate it in your disk
If you're using just a SWF file such as a player.swf or something similar that you downloaded from a website, I'm sorry but you're out of luck! DW requires that you have the FLA source to edit the SWF file that you're using within DW.

Modify or edit a .swf file

Hi,
with the option to modify or edit a .swf file?
Can you give clarifications?
Thanks

Thanks for your reply,
but I don't have the file.fla.
What can I do?

How do I edit a .swf file in edge animate? How do I save it as a swf file?

Hello, I need to edit the actionscript in a swf animation file. How do you do that with Edge animate?

There is no such workflow for swf files.
Edge animate only understands html, javascript. SWF files are alien to it.
You should be using Flash Professional CC, for generating the swf files.
hth,
Vivekuma

Edit a .swf file to place animation part in PPT.

I have windows 7 64bit installed with adobe CS6 full suite. i am trying to learn more about flash and adobe products in general. however i have a project i need to complete with power point slides were i want to take this packetsniffer.swf file and it to my MS power point slide. i need to open the .swf file and edit a couple slides out of it. I only need the one animation in it. how do i do this with adobe flash or some other application. then i will need help putting it in the power point slide show as a slide animation. thanks

An FLA is the source file you use to make a SWF. The original creator of the SWF file would have it.
There are many SWF decompilers out there, some paid, some free. You'll just have to Google it and experiment.

How do I script SWF files instead of JPG files in XML loader?

I have a SWF loader (greensock.com platform) and a thumbnail image scroll underneath it made of small image buttons. Each image button has a link which loads a new SWF file into the SWF loader above. Here is the code for each button which loads the bigger SWF file into the loader above:
Button3.addEventListener(MouseEvent.CLICK, Button3_PlayPopUp);
function Button3_PlayPopUp(event:MouseEvent): void {
    //setting the sourceVar
    sourceVar="3.swf";
    //making the SWFLoader load
    //as setting the soureVar after the SWFLoader is created won't do anything unlesss
    //I also re-create the SWFLoader with the new sourceVar when the button is clicked
    loader_howToLoader2.url = sourceVar;
    loader_howToLoader2.load(true);
Then I decided to load all button via XML loader. I followed the tutorial on XML loaders which deals with loading jpg images and assigning URL links to them in the following manner first in XML file:
<image src="appThmb_imgs/appThmb_imgs117x175/A-illuminatorUpLit_117x175.jpg" title="UpDownGlowingVase" url="http://www.888acolyte.com"/>
and then in AS3 like this:
var xmlLoader:URLLoader = new URLLoader();
thisOne.link = imageList[item].attribute("url");
function clickScrollerItem(e:MouseEvent):void {
//trace("clicked item " + e.currentTarget.itemNum + " - visit url: " + e.currentTarget.link);
var urlRequest:URLRequest = new URLRequest(e.currentTarget.link);
try {
navigateToURL(urlRequest);
catch (e:Error) {
// handle error here
trace(e);
My question is: How do I apply the code to each individual small thumbnail button to load a bigger image into the SWF loader above? Do I have to add something to XML file or this way it will never work with jpg images? Can url in XML file set the source var (//setting the sourceVar), since they are all individual and then somehow apply the making SWL loader to load part (//making the SWFLoader load) as a standard somewhere in the AS3 code?

O.K. Here is my COMPLETE function.
xmlLoader.addEventListener(Event.COMPLETE, LoadXML);
function LoadXML(e:Event):void {
    trace("xml load complete");
    xmlData = new XML(e.target.data);
    //trace(xmlData.image); //we'll see each image xml element listed in the output panel with this xmlList
    buildScroller(xmlData.image); //rather than trace the xmlList, we send it to our buildScroller function
//build scroller from xml
function buildScroller(imageList:XMLList):void{
    trace("build Scroller");
    //var scroller_x:int=0;
    for (var item:uint = 0; item<imageList.length();item++) {
        var thisOne:MovieClip = new MovieClip();
        //thisOne.img_width=imageList[item].attribute("width");
        //outline
        var blackBox:Sprite = new Sprite();
        blackBox.graphics.beginFill(0xFFFFFF);
        blackBox.graphics.drawRect(-1, -1, 86, 128);//-1,-1 places rectangle 1px left and up.86, 128 draws rectangle 1px wider on all sides of placed image dimenstions of 84x126
        thisOne.addChild(blackBox);
        //scroller_x += thisOne.img_width + 20;
        //var currentX = currentImageWidth+spaceBetween;//modified line to adjust variable thumb widths
        thisOne.x = (84 + padding) *item;//84 is the width of the loaded images and 15 (which was before paddign var) is the padding
        //thisOne.x = scroller_x;//modified line to adjust variable thumb widths
        thisOne.itemNum = item;
        thisOne.title = imageList[item].attribute("title");
        thisOne.link = imageList[item].attribute("url");
        thisOne.src = imageList[item].attribute("src");
        thisOne.alpha = 0;//makes all thumb images at alpha=0 before they are fully loaded
        //trace(thisOne.itemNum, thisOne.title, thisOne.link, thisOne.src);
        //Loading and Adding the Images
        //image container
        var thisThumb:MovieClip = new MovieClip();
        //add image
        var ldr:Loader = new Loader();
        //var url:String = imageList[item].attribute("src");
        var urlReq:URLRequest = new URLRequest(thisOne.src);
        trace("loading thumbnail "+item+" into Scroller: " + thisOne.src);//url
        ldr.load(urlReq);
        //assign event listeners for Loader
        ldr.contentLoaderInfo.addEventListener(Event.COMPLETE,completeHandler);//tells us when the loading is complete
        ldr.contentLoaderInfo.addEventListener(IOErrorEvent.IO_ERROR, errorHandler);//tells us if there are any typo errors when the loading is complete
        thisThumb.addChild(ldr);
        thisOne.addChild(thisThumb);
        //create listeners for this thumb
        thisOne.buttonMode = true;//makes boxes act as buttons
        thisOne.addEventListener(MouseEvent.CLICK, clickScrollerItem);//makes boxes act as buttons
        thisOne.addEventListener(MouseEvent.MOUSE_OVER, overScrollerItem);//traces the title when the mouse is over the bounding box in the Output Panel
        thisOne.addEventListener(MouseEvent.MOUSE_OUT, outScrollerItem);//traces the title when the mouse is out the bounding box in the Output Panel
        //add item
        scroller.addChild(thisOne);
But I am not sure if I expressed myself clearly. All what you have indicated happens. Images are being loaded and url strings are working. I can not figure out how to tweek the code so instead of url specified in xml file I can load swf image into the SWF loader on the same screen?

How to edit a SWF file

Similar Messages

Maybe you are looking for