How to edit/adjust color in premire cs 5 to get color tone like box office movie (breaking down 2)?

hi, can anyone help me how to edit/adjust color in premiere cs 5 to get color tone like "Breaking Dawn part 2" (box office movie)?
I have a short indie movie project, and i want the movie to have color tone like "breaking down" movie.

Joe,
Here are some stills: http://movies.yahoo.com/movie/the-twilight-saga-breaking-dawn-part-2/photos/the-twilight-s aga-breaking-dawn-part-2-stills-slideshow/breaking-dawn-part-2-poster-photo--1274954362.ht ml
There is also a "trailer" on makeup, etc., but did not really find actual vids (probably just did not look well enough).
Hunt

Similar Messages

How do i adjust the brightness on my screen? it's dim like when the power cord is out.

After my wife had the laptop out of the house today, I plugged it back in and the screen brightness is very dim...like what it looks like when the power cord is not in...usually, when I plug the cord back in, the screen becomes brighter...that has stopped. Any ideas to fix?
thanks.

Hi,
Here are some common ways to adjust the brightness.
Open windows Control Panel, open Windows Mobility Centre and adjust the brightness here.
On a lot of notebooks, tapping f3 will often increase the brightness ( with f2 reducing it ).
Open windows Control Panel, open Power Options, click Change Plan Settings next to your selected power plan and you can adjust the brightness here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to edit citations in Word

Hi everyone!
I am working with word and trying to edit the format from my citation but don't know how to do it.
I am using format IEEE, which means that my citations look like: [1] [2] [3] etc I found out how to manage to get two citations together in brackets: [1,2].
The PROBLEM is that if I have such case: [1, 2, 3, 4],
I would like to get look like this [1-4] but I dont know how to do it... or even if gets more complicated like this: [1,
6, 7, 8], to get something like this: [1, 6-8].
Does anyone know how I can do it? prob I have to do it directly from the code right? " CITATION AJe13 \l 1031 " but I don't know
either how this code works...
Thank you very much for your help! :-)

Hi everyone!
I am working with word and trying to edit the format of my citations, maybe someone can help me...
My citations look like: [1]
[2] etc I found out how to manage to get two citations together in brackets: [1,2]. The
PROBLEM is that if I have such case: [1,
2, 3, 4], I would like to get look like this [1-4]
but I dont know how to do it... or even if gets more complicated like this: [1,
6, 7, 8], to get something like this: [1, 6-8]. Does anyone know how I can do it?
Thank you in advance :-)
Marta

How do I adjust the color of a glow/drop shadow in a title?

Some of the preset styles for text/titles have drop shadows or glow effects in various colors. How do you adjust the color? Say if I wanted the Bell Gothic Ice 26 style, but with a orange glow instead of teal?

every
In the absence of further information, I will generalize for now.
You do your text titles color changes in Color Properties in the Titler. The fill in Color Properties is enabled only after you have added a Style.
In order for the Stroke to be enabled in Color Properties, you need to apply a Style and that style must have a Stroke in its preset. Please read the details of the Titler's Color Properties in the following Adobe documents
Adobe Premiere Elements Help | Adding color and shadows to titles
We will be watching for your follow ups.
Thank you.
ATR

How can I adjust the skin color of only one person in the photo (Elements 11)

How can I adjust the skin color of only one person in the photo (Elements 11)?
Thanks for your help.

From your question, I assume you know how to do it for all persons :
Menu : Enhance/Adjust color/adjust color for skin tones
So what you have to do is to do the color correction on a layer copy. Concentrate on the person to enhance and ignore the rest of the picture.
When you are satisfied, add a mask to the layer copy and fill it with black.
Set your foreground color to white
In the layer palette, click on the mask icon on the right of the layer icon.
Then use a brush to paint white on the skin of the person to reveal the correction.

I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

I recently switched to Aperture. When I opened an image I imported from iPhoto, I don't have an option to edit it. Top of "Adjustments" tab says "image offline". How can I adjust Aperture so I can make adjustment to my iPhoto images?

I never tried importing from the iPhoto library as referenced images. I wonder if Aperture can access images stored in an iPhoto library package? Even if it would work, it sounds like a bad thing to do.
You might consider starting over and this time have Aperture manage the images. That will copy them to the Aperture library, leaving the iPhoto library untouched. This assumes you have sufficient space to make a complete copy of all the images in your iPhoto library plus another copy of each image that Aperture makes as the preview image. You can then back up your iPhoto library (two backup copies, just to be sure) then remove it from your hard drive when you start getting too low on space. As I write this I don't know where your iPhoto or Aperture libraries are/will be located so I'm assuming you have them on your HD.

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

The old calender iOS6, in the year view, it shows how much busy I am in a day by indicating the color intensity. But the new calendar year view is totally useless!!! also too bright!! Why apple does this?? What is the way to revert the calendar back???

Unfortunately, that's the way the cookie crumbles nowadays. Sir Jony Ive's GUI design for iOS7 has been met with much skepticism (to say the least). But until the company sees the compelling need for an adjustment or reversal, it "ain't happenin' ". So amble over to the feedback page ( http://www.apple.com/feedback/ ) and make your displeasure known to the company, OR make it known by not purchasing its products. Because as long as the iGadgets continue selling as fast as they can make them, they will see no need for change.
BTW, do note you are NOT talking to Apple here. This is just a user-to-user forum.
Edit: for now, you can also try out any of the alternate calendaring apps available in the App Store.

How to edit a clip in a multicam sequence (CS6)?

I am using Premiere CS6 on Mac, I have a multicam sequence set up (2 cam).
I just want to color correct cam 2 to match cam 1 and I cannot figure it out. Everything I try applies the correction to the entire sequence.
If someone can provide exact steps to apply color correction to one clip in the sequence only (it's just brightness/contract, nothing complicated), so that it's reflected in the multicam sequence I'd be grateful. Even a link to a tutorial would be good as I cannot seem to find it online (almost everything points to CC which I don't use and is totally different than CS6).
Please help!

Ok, I finally figured it out, no thanks to Adobe's crap "Help" system, which is missing MANY steps...
1. Right-click the Multi-Camera Source Sequence in the Project tab (NOT the multicam sequence you're editing). It's the one with the green/blue lines perfectly lined up.
2. Choose Open in Timeline.
3. In the Timeline, make the edits you want to the clip you want (in this case, Brightness/Contrast on clip 2)
4. Go to Window > Multi-Camera Monitor
5. You'll see your source clips stacked in the window, and you can fine tune from here.
6. Click on the Multi-Camera Sequence you're editing in the Timeline, and the Monitor should update to reflect your changes.
You can toggle back and forth between these sequences in the timeline, adjusting as you need.
This was incredibly easy for me to document, I really fail to understand why the Help file couldn't be bothered. It's completely missing things like what the difference is between the source multicam sequence and the program multicam sequence, how to edit a clip in your multicam sequence, and how the multicam monitor works. Really pisspoor documentation, but at this point, I don't expect anything else from Adobe.

CYMK slider color not staying put when trying to color match editable text

Hello-
I'm having trouble with Acropbat Pro and color matching. I tried the magnifying glass for the editable text box I created, but the color is slightly off. I used command 3 to open up the CYMK slider. I adjusted the slider to the color I do want (the CYMK color in the document made in Illustrator), hit "ok", but the color reverts to something else!!! I recheck the text color and sure enough the CYMK slider bar changed to something a little different. Why is this????
Ex: I click on text in the editable box, then another color option, adjust the CYMK slider to 0, 58, 28, 0 and then click ok to exit out of the color choices box. The text then changes to different color again!!! I click back on the color and somehow the CYMK slider is 3,56,28,0???? Why is this??? I'm so frustrated I can't figure out how to match this document and make it stay!!!
Thanks!!!
Lisa V

Here is an example on an editable text art document:
Baseball Party Invitation Editable Text Invitation by printmagic
This is what I mean. I am bringing in an art document and creating a personalized name area. I am trying to match the text to a color on the document but the magnifying glass is off. And when I go into "other color" I am given a number of color picker options including a slider. I am given a CYMK slider if I click command 3 on the grayscale slider. I change the CYMK color slider to what I want but the document switches it.

How do I adjust the piano sustain pedal?

How can I adjust the sustain pedal? I've tried in the Midi Draw section but can't quite figure out how to make it smooth. Grabbing a "dot" and moving it just doesn't work!!!

There are not actual "adjustments" for this. Instead, search
Photo Booth > Help for "background holes" (without quotation marks.)
The most common problems are:
• Camera movement, (be sure your iMac does not move)
• lack of light, and
• not using solid color background that does not move
If you are haing trouble with Photo Booth > Help on your Mac, see this web version:
http://docs.info.apple.com/article.html?path=PhotoBooth/3.0/en/27050.html
Message was edited by: EZ Jim
Mac OSX 10.7.3

How can I process a linearly converted raw file while preserving color?

Hi,
I want to convert my raw files in a linear format (to preserve all the dynamic range and detail and prevent unnecessary clipping). My question is "how can I modify the brightness or luminance while preserving the hue and saturation of every color?"
As for applying the gamma curve, I guess the best and only way in Photoshop is to create a Levels adjustment and place a 2.2 in the middle (gray) input box. However, I read in http://www.luminous-landscape.com/tutorials/hybrid-conversion.shtml that a 4.75 value should be used... Why? Is the number placed there not correspond to the gamma being applied?
Thanks in advance.
Juan Dent
P.S.: getting colorimetrically accurate color from the camera, through all the manipulations in Photoshop is for me crucial. Any pointers as to what to do and what to avoid?

First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version. Always use the very latest version. 8.3 was simply the first ACR version to support your camera model, that's all.
Note that the DNG Converter works only on folders, not on individual raw files. Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
You also need to make sure that CS5 is fully updated. You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

How can I adjust the font size of my printouts?

I have an HP Officejet 4500 all-in-one printer and a new HP pavilion Slimline computer. Since I changed to this computer, my printouts have very small font size making them hard to read. How can I adjust the font size of the printout? Is it a computer or printer function? I appreciate the help.

I, too, am frustrated. This seems like something that would easily be handled within the application software. However, none of the fixes I've been offered have been very helpful. My cousin sugested using Control C and Control V to move the text to WORD. Once in WORD, you can manipulate the text on a WORD page...sometimes. I've had good and bad luck with this method. It still requires working in two different programs to get it legible. Does anyone else have a 4500 All-in -one with this problem, or is it only me? Thanks, [Edited for Personal Information]

How do I adjust the print size of a photo?

I created a collage in PSE 10 and took the photo to Ritz to have printed out in an 18" x 24" poster. When the file was read into their computer for printing, the sizing came up as 18'1/2" x 24". Printing the photo as is will cut 1/2" off of the collage. How do I adjust the print parameters of my photo file in PSE 10 to be exacetly 18" x 24"? Thanks.

Here is my suggestion:
Open a blank, new file (File>new>blank file) size 8.5x11"
Open the collage
Go to Select>all
Go to Edit>copy
Go back to the blank file created in step #1
Go to Edit>paste. The collage will be on its own layer
Access the move tool, and with the corner handles resize the collage. Using the corner handles should preserve the aspect ratio. If you open the rulers, you will have a point of reference as you go along.
Print a draft copy to see if it will be suitable in the frame..
Please report back with your progress.

How to edit 16bit TIFF image sequence file in FCP?

Dear all,
I have a number of 16 bit TIFF image sequence files (2048 x 1024 resolution) - some of them are RED footage, and others came directly from our f/x guy. We are going into a color correction session in a post house and we've been asked to provide a sequential 16 bit TIFF image sequence of the edited time line.
I need to do a cross dissolve b/w most of the clips I have. I have created image sequence QT movie (reference files) from the TIFF images. Though they play fine in QT player, when I try importing into FCP, I am met with a "general error". I tried both dragging it into QT, as well as File --> Import.
I am wondering what can I do to get these clips into FCP in order to apply the cross dissolve transitions I need. Is this a problem relating to the 16bit nature of the TIFF files?
I tried exporting the TIFF image sequence standalone QT movie, and those imported fine. However, I have a feeling that the standalone movie conversion also decrease my bit depth from 16 to 8. (When I do my final TIFF output from FCP after dissolves / transitions had been applied, each TIFF file is now 8 MB instead of 12 MB, hence my suspicion that the bit depth is adjusted).
Are there any settings I am missing, or does FCP simply don't support 16 bit image sequence reference file. As a test, I had also converted all my TIFF to jpg, and created jpeg image sequence reference file. These reference QT file can be successfully imported to FCP and I can edit them as if they are a clip.
If FCP is not able to handle these files, what are my other options? After Effects?
Any help is appreciated.
Thank you.
Michael
<Edited by Moderator>

As far as I know, both FCP and Color only support up to 10 bit color, which is 1024 levels for each color channel, more than enough for avoiding color banding.
If you need 16 bit for sure, I believe AE will support 16 bit output. Another 16 bit application would be the extended version of Photoshop, which has some limited time line capability.

How to edit photo text in adobe photoshop?

how to edit photo text in adobe photoshop?

It will depend on the image. If it was one that was saved as a psd file and has layers (window>layers) {Look in the layers panel and see if you see a layer with a thumbnail that looks like a large T} In this instance, you can double click on that thumbnail to highlight the text then type in its replacement.
If the image is a jpg which does not support layers, transparency or live text, then that would mean that you need to use the selection tools to select that text and fill it with the same color as the background. You can then use the text tool to type in the text you want.
Remember to save a copy as a psd file so you can edit the text at a later date.

How to edit/adjust color in premire cs 5 to get color tone like box office movie (breaking down 2)?

Similar Messages

Maybe you are looking for