How to edit CANCEL TECO user exit

Can anyone tell me how to edit the user exit for cancelling the technical completion. It will be like this TCODE ---> IW32 ---> ORDER ---> FUNCTIONS ---> COMPLETE ---> CANCEL TECHNICAL COMPLETION
Thx & regards

Hi Ilango,
This this user exit : EXIT_SAPLCOIH_004.
Regards,
Prabhu Rajesh.

Similar Messages

How to find out all user exits edited

Hi All,
Would you know how to find out all user exits have been ever edited?
Can we find out those user exit by some tcode or table?
Thank you very much
Best Regards,
Calvin
Edited by: Sam Sum on Mar 2, 2009 5:09 AM

Hi,
Just try this in your system.
Go to SE38 and give ZX* and press F4.
Have a look at table MODATTR to find the active projects in your system.
Regards
Edited by: Rajvansh Ravi on Mar 2, 2009 5:17 AM

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find the appropriate user exit for invoic02 idoc in idoc_output_invo

Hi all,
I am new to this community p
i have issue regarding the How to find the appropriate user exit for invoic02 idoc in idoc_output_invoic function module.........
thanks,

Hi ,
welcome to SDN.
You can select the appropriate Customer exit accrding to the available parameters .
The list of exits available are
EXIT_SAPLVEDF_001
EXIT_SAPLVEDF_002
EXIT_SAPLVEDF_003
EXIT_SAPLVEDF_004
For Example , if you want to modify the Idoc data(EDIDD) you have to use the EXIT_SAPLVEDF_002. accodingly you can select the user exit according to the avaialable parametres.Use Table MODSAP fto get the Enhancement name.
Hope this Helps
Rgds
Sree
Edited by: Sree on Jul 23, 2010 12:11 PM

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find the exact user exit for our requirement?

Dear Mr. keerthi,
can you please explain me how to find the exact user exit for our requirement?

Hi sandip
There is more than one method in which you can check for user-exits.The following method is used very often.
How to find the exact user-exit for your requirement.
1. You can check the user exists using transaction SE85.
2. Repository Information System -> Enhancements -> Customer exits
3. You can search the user-exits by package name.
4. Double click on each exit name to check the function module exits.
The procedure to find the package name.
Execute transaction SE93
Enter the tcode of the transaction for which you want to check the user exit.
Example: if you want to find the user-exit for purchase orders while changing, enter ME22n and press display.
You will get to see the package name
But you need to confirm that the user exit will get triggered at the appropriate event.
( example: you might want some validations to be done ON SAVE of a purchase order)
Checking if the user-exit is getting triggered or not.
1. Open the user exit function module (that you have got in step 4) in Tcode SE37.
2. Click on where used button. In the pop up that immediately appears choose only programs .
3. You will get a list of programs. Double click on the program name.
4. You will get the list of location where this function module user exit is used.
5. Place session break points at each of these location ( at each CALL FUNCTION statement)
6. Now go to your transaction ( say change purchase order tcode:Me22n) and check if the user exit is getting triggered on appropriate event.
regards,
Prasad

How to find the ME29N 'USER EXIT' when our save the release PO after.

How to find the ME29N 'USER EXIT' when our save the release PO after.
which user exit will be used?
thanks.
alex.

Hi,
process :
    go to tranx code :   ME29N ,
       System---->Status , here copy the program name (SAPLMEGUI),
     go to abap editor and specify the program name SAPLMEGUI and find the package "ME".
     tranx code : CMOD , Utilites--->Sap Enanchement,
                                     specify the package name : ME
                                      and execute, displays a list of exits ,
                             and find out our suitable exit based on requirement.
check these :   EXIT_SAPMM06E_021
reg
Siva

How to find a correct User-Exit

Hi All
      I need to make changes in the user exit and there are many user-exits in the standard program here my question is how to find the correct user-exit which suits our requirement.
Thanks
srini

run this program by giving ur t code...and click the exit it will go to SMOD there u read the documentation of that exit..if ur requirement satisfies try to use that one..
REPORT ZUSEREXIT.
*report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : devclass like tadir-devclass.
parameters : tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
                  and object = 'PROG'
                  and obj_name = tstc-pgmna.
move : tadir-devclass to devclass.
if sy-subrc ne 0.
   select single * from trdir where name = tstc-pgmna.
   if trdir-subc eq 'F'.
     select single * from tfdir where pname = tstc-pgmna.
     select single * from enlfdir where funcname = tfdir-funcname.
     select single * from tadir where pgmid = 'R3TR'
                        and object = 'FUGR'
                        and obj_name eq enlfdir-area.
     move : tadir-devclass to devclass.
   endif.
endif.
select * from tadir into table jtab
               where pgmid = 'R3TR'
                 and object = 'SMOD'
                 and devclass = devclass.
select single * from tstct where sprsl eq sy-langu and
                                  tcode eq tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
      20(20) tcode,
      45(50) tstct-ttext.
skip.
if not jtab[] is initial.
   write:/(95) sy-uline.
   format color col_heading intensified on.
   write:/1 sy-vline,
          2 'Exit Name',
         21 sy-vline ,
         22 'Description',
         95 sy-vline.
   write:/(95) sy-uline.
   loop at jtab.
     select single * from modsapt
            where sprsl = sy-langu and
                   name = jtab-obj_name.
     format color col_normal intensified off.
     write:/1 sy-vline,
            2 jtab-obj_name hotspot on,
           21 sy-vline ,
           22 modsapt-modtext,
           95 sy-vline.
   endloop.
   write:/(95) sy-uline.
   describe table jtab.
   skip.
   format color col_total intensified on.
   write:/ 'No of Exits:' , sy-tfill.
else.
   format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first   screen.

How can I find the USer Exit...

Hi,
How can I find the USer Exit...
I need to do changes for this User Exit :EXIT_SAPLKEII_002
In which T-code I can open this Exit
Ex: Go to some Transcation code and then give the name of the Exit ato access this Exit
...any sugesstions will be apprecaited!
Thanks & Regards,
Kittu

Hi,
the EXIT : EXIT_SAPLKEII_002 is the exit,in this SAPLKEII is the standard Program.Copy this program and go to transactio SE38 and press Enter and then go for the option Where used list and check the check box Transaction. It displays the possible Transactions that the Exit triggers
Regards,
Vijaya Lakshmi.T

How to access variables outside user exit

Hi,
I'm working with a user exit and my problem is that in a particular moment I have to access variables located outside the scope of the user exit (they are in a standard program)
How can I reach these variables?
thanks in advance

Hi,
If they are global variables then you can access them using Global assign technique,
For example,
FIELD-SYMBOLS: <fs_value> TYPE ANY.
ASSIGN ('(SAPMV45A)XVBAK') TO <fs_value>.
It is basically,
ASSIGN ('(<Std. Program Name>)<Variable name>') TO <field symbol>.
NOTE: To make sure they are accessible in your user exit, just put a break-point in the user exit and once you are there in debugging, type in,
(<Std. Program Name>)<Variable name> in the Field names section and if it does not show it in RED then it is accessible..
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni

How to find the exact user exit in enhancement.

Hi All,
I am in learning phase. I am working on TCODE VA01 and want to change the PO Date. But i am unable to find out the exact user exit. If somebody could guide me that what is the procedure to find the exact user exit for a perticular field or like that. I am know how to find all the enhancements in the TCODE.

hi
Run this program and give the tcode and it will list down all the user exits for that Tcode.
REPORT z_find_userexit NO STANDARD PAGE HEADING.
TABLES : tstc, tadir,            modsapt,            modact,            trdir,             tfdir,      enlfdir,     tstct.
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
SELECT SINGLE * FROM tstc    WHERE tcode EQ p_tcode.
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir       WHERE pgmid    = 'R3TR'         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir          WHERE pgmid    = 'R3TR'            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
    SELECT * FROM tadir      INTO TABLE jtab      WHERE pgmid    = 'R3TR'        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct      WHERE sprsl EQ sy-langu        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',    20(20) p_tcode,    45(50) tstct-ttext.    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,      2 'Exit Name',      21 sy-vline ,      22 'Description',      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt        WHERE sprsl = sy-langu AND        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,   2 jtab-obj_name HOTSPOT ON, 21 sy-vline , 22 modsapt-modtext, 95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
     SKIP.
     FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards
Sajid
Edited by: shaik sajid on Jun 26, 2009 12:06 PM
Edited by: shaik sajid on Jun 26, 2009 12:10 PM

How to find out whether USER-EXIT is active or not

Hello!
How can I find out whether USER-EXIT is active or not ?
I set a break-point at these points and nothing happens
if I want save my daocument ???
Why
PERFORM USEREXIT_SAVE_DOCUMENT.
PERFORM USEREXIT_SAVE_DOCUMENT_PREPARE.
Ragards
Ilhan

Hi Ilhan
The easiest way, I guess, is by going to transaction SMOD, sticking in your enhancement name and pressing the test button.
When placing breakpoints, don't use Breakpoints > Breakpoint at > Statement... and enter
PERFORM USEREXIT_SAVE_DOCUMENT
because you won't get any hits since the function module names are stored dynamically.
Rather use Breakpoints > Breakpoint at > Function Module... and enter
USEREXIT_SAVE_DOCUMENT
for a better chance of hitting the breakpoint.
Cheers
Lyal
Message's terrible grammar was edited by:
Lyal Schumann

How to know where the user exits or enhancement used in standard sap code?

Hi
I m pretty new to abap.
How can I know where the user exits or enhancement used in standard sap code?
As i have to add some functionality to the standard sap code. I m looking to search the enhancement or user exits used in this standard code wher i can add my functionality.
thanks in advance.
Moderator message : Search for available information, thread locked.
Edited by: Vinod Kumar on Oct 19, 2011 2:38 PM

Hi Henry,
I don't think this is the easiest way to look at the code around a particular field on the screen. Debugging standard programs also can be very tedious, if not impossbile. So, instead of this question, I would like to find out exactly what you want to do if you know the code.
If you are in a transaction and you want to know where the code of a particular field is, the fastest way to get to it is by pressing the F1 key on the field and then press the Technical info button on the help screen. In here you will typically see the same kind of information but it is very specific to the field you selected.
PROGRAM(SCREEN) tells you which program is manipulating the main screen, in which your field is embedded. Remember your field may be included in a sub-screen and that subscreen may be the one included in the main screen.
PROGRAM(SUB SCREEN) tells you which program is directly responsible for the field on the subscreen it is included in. This is where you should find the code most appropriate for the field, but not necessarily.
PROGRAM(GUI) controls how your push buttons and the menu options in the screen behave and controlled.
Srinivas

How can I cancel my user billing info?

I created a virtual credit card to be able to buy mountain lion and now I cant download free apps because my billing info is not valid anoymore. how can I cancel this?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
You will need to replace the virtual bank card with another form of payment, either a real bank card or an iTunes gift card, unless you are one of the lucky few who has a None option in the payment options of their account, which would let you remove a payment option completely.
To view your account info, open the iTunes app on your Mac, in the Quick Links on the right choose Account, after signing into your account you will see the different ares of ifo that you can edit.

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

How to edit CANCEL TECO user exit

Similar Messages

Maybe you are looking for