How to edit data selection(Date) for an Init Delta Infopackage

Hi Experts,
We have a Process Chain which contains an Delta Infopackage.
This Delta Infopackage has a Data Selection (Date) condition which is till 12/2008. As well the same date selection is present in the init method as 12/2008.
Also we need to change the date selection in the data sources in R/3 side.
*Is there a way to edit the Init condition so that we can pull 2009 data without deleting the present Init and recreating a new Init?????? please suggest us with the procedure for the same.
Also could you tell us the impact of changing the date selection in BW and R/3 side??
Appreciate your response.
Thanks
Vivek Das Gupta

Hi Ajeet,
I followed the steps you mentioned.
I created a new infopackage, gave the condition (01/2009 to 12/2999) and did a Init without Data transfer.
1. Now if we do a Delta load, will the loading be based on both Init Selections (01/2004 to 12/2008 and 01/2009 to 12/2999) or will it take the recent Init condition only(01/2009 to 12/2999)??
2. After doing the New Init(01/2009 to 12/2999), the Delta InfoPackage still shows the old Data Selection (01/2004 to 12/2008) In Selection Tab of IP, do we need to change the Date Selection as 01/2009 to 12/2999?
3. Where can we the Data selection in R/3 (TCODE)??
Vivek Das Gupta

Similar Messages

How to edit the selectable languages for spell checking?

Hallo Mozzila Community
After using Firefox nightly 23 on Chakra Linux via bundle and I think it messed up my settings of the spell checker via Firefox sync.
The Problem pop up on openSUSE and Chakra Linux but not In Kubuntu 12.04(it has separate language packs).
I want to have German and English GB and maybe Bosnian or Croatian spell checker but I can not select it via right click -languages.
Now I have on both Chakra Linux and openSUSE 12.3 Firefox 20 by default maybe 30 languages installed but I can not select the language I want.
For example on Chakra Linux Firefox 20 I have only German variants selectable,German Luxenbourg,German Belgium ... and so and I can not select other language via add-on or about:config spellchecker.dictionary; it stay alwas on a German variant so I need to edit the right click language selector to bring it to work.
2.Example on openSUSE can not select German and En_GB but I can select a bunch of other languages I do not need in the right click languages selctor.
Both are Firefox 20 with openSUSE KDE modifications and have all available spell dictionary installed.
So how can I edit the list of selectable languages on the right click-languages?

There is a difference between language packs that affect the Firefox user interface and spell check dictionaries.
*http://kb.mozillazine.org/Language_packs
At least one dictionary should be installed and have a check mark to indicate that it is selected.
*Open the "Add Dictionaries" link to install a dictionary if you do not have one.
*Make sure that [X] "Check Spelling" in the right-click context menu is check-marked.
You can look here for dictionaries:
*https://addons.mozilla.org/firefox/language-tools/
*http://kb.mozillazine.org/Dictionaries
*http://kb.mozillazine.org/Spell_checking

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

I can't see how to edit PDF inside Portfolio for Acrobat X. In Acrobat 9 Pro

I can't see how to edit PDF inside Portfolio for Acrobat X. I can do this in Acrobat 9 Pro with the Document pull down menu. Did they take this away in Acrobat X?

Whether it's maxed or not doesn't make any difference.
The bottom part of the image/scroll bar is always under the Windows taskbar any time the URL is opened.
It is always fixed by doing something, either switching to and back from another window, or turning on and off one or more toolbars.
That shouldn't be necessary. The bottom part should be visible when the URL is opened.

How to Create a selection variable for Fiscal period/year range

How to Create a selection variable for Fiscal period/year range. The idea is to filter the query results using a fiscal period/year range user input rather than a full fiscal year input.

Hi Priya,
Open the query in a query designer -> in the left hand side you would find the fiscal year period under the time dimension -> right click -> create variable -> create the variable.
The better option would be use any of the SAP provided variable. You would find them under the Fiscal year period in the left hand side in the query designer.
Bye
Dinesh

How to edit PDF/ebook data?

I'm not sure if this is the right place to ask this, but is it possible to edit PDF information (author/title/year etc.) within Snow Leopard, or do I require additional software?
If so, can anyone recommend a simple application that can do this?

Hi Ramu,
To check cube data, use the manage button next to cube and in contents tab use InfoCube contents option. You could also check Fact table data in the same tab.
You could also use TCODE listcube.
If you want to edit the cube data, there is no direct option. You have to selectively delete the incorrect data and reload it.
For selective deletion of data goto the manage button next to cube and in contents tab use Delete Selection option.
Regards,
Pankaj

How to edit XML parsed data and save on iPhone app

Hi,
How to edit and XML retrieved data that is displayed on an iPhone app and save again in the same XML file using iPhone SDK.
In other words I want to change the XML file data or edit and save.
Thnx in advance.
Regards
Amit

Hello amit,
No, not at all. Surely you will parse your XML file using the NSXMLParser class. OK! i think i get it now, do you wants to change/modify the value of any tag in the XML file? For that you will be required to parse your XML file using NSXMLParser class, and fill out some data structure (according to the the XML format) do some changes into your data structure, and then write your XML to the file (according to the edited data structure) using the method i told u earlier. This is what my preferred method is, and i am pretty much sure that it is not a bad way to do this at all.
Hope this clarifies some of your queries.
Best regards,
Obaid

How to Edit a XML data file from AS3 class...

Hi...
             I need to edit an XML data file I have at the exit of application.... I have a demo code which is not working....
This is the code :
public function UpdateData():void
               trace("Closing....");
               var FileData:XML=<Hello>Hai</Hello>
               var urlLdr:URLLoader = new URLLoader();
               var urlRqst:URLRequest = new URLRequest ("AppData.xml");
               urlRqst.data=FileData;
                urlRqst.contentType = "text/xml";
               urlRqst.method = URLRequestMethod.POST;
               urlLdr.load(urlRqst);
This AppData file already exist and has some data in it.
    Plus :
   How to find the application is exiting.

use: fscommand('Quit');
to exit your app.
and this is how you would use the urlloader class to save data:
public function UpdateData():void
         trace("Closing....");
          var FileData:XML=<Hello>Hai</Hello>
var urlVar:URLVariables=new URLVariables();
urlVar.fileData=FileData;
            var urlLdr:URLLoader = new URLLoader();
           var urlRqst:URLRequest = new URLRequest ("this must be an executable to parse and write data");
           urlRqst.data=urlVar;
           urlRqst.contentType = "text/xml";
               urlRqst.method = URLRequestMethod.POST;
              urlLdr.load(urlRqst);
but i don't think you can use an executable on a fl4 device so you will need to use a different class. i don' know how you're storing an xml file on a fl4 device but you should be able to use the sharedobject to read and store xml.

How to mofidy the selection text for a report

Dears,
Do you know how to modify a selection text in the selection screen of a standard report, such as changing "Storage Location" in the selection screen of report MB5B to "storage Loc"?
one of a way to realize it is to modify the text of relevant data element.
except modifying the data element directly, It seems that use SE63 could do it, but I forgot how to use it.
Thanks all for your reply.
Zhongkai

Hi Liu,
Check this link for translations thru SE63:
http://help.sap.com/saphelp_sm310/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/content.htm
Hope this helps you.
Regards,
Chandra Sekhar

How to create the select option for the Plant in screen (Module pool)

HI,
I am developing one module pool program and I have below requirement,
currently plant is acting like PARAMETER and the now it should be changed to select option.
how to create the select option in the screen
Thanks and regarding,
Malla
Moderator message - Cross post locked
Edited by: Rob Burbank on Dec 16, 2009 1:41 PM

Steps to get SELECT-OPTIONS in module pool programs.
1.Start one dialog program with SAPMZ_001.
Place the below code in the TOP include of the dialog program.
TABLES marc.
SELECTION-SCREEN BEGIN OF SCREEN 3200 AS SUBSCREEN.
SELECT-OPTIONS: werks FOR marc-werks.
SELECTION-SCREEN END OF SCREEN 3200.
2 .Create one screen 3000.
Go to Layout of the screen and Define subscreen area on the screen and Name it as l_subscreen.
Place the below code in the Flow logic of the screen.
PROCESS BEFORE OUTPUT.
CALL SUBSCREEN l_subscreen INCLUDING 'SAPMZ_001' '3200'.
PROCESS AFTER INPUT.
CALL SUBSCREEN l_subscreen.
Activate all.
Create Transaction code for the dialog program .
Execute the transaction code. You will see the select-option for werks how we see on Selection-screen.

Dreamweaver and PhoneGap: How to Edit the Application Manifest for an Android app

I successfully created an Android app using dreamweaver cs6 and the PhoneGap build service. I submitted the app and it is live in Google Play. The only problem is that the app is requiring all kinds of permissions from users that are not necessary for the app. The app requires Internet access, but it does not require access to the camera or the user's contacts, etc. I understand that this information is held in the Application Manifest file, but I don't know where that file is.
Can you help me figure out how to edit the Application Manifest file for my android app?
Thanks,
Michael

To edit permissions, you do so in the config.xml file. After making changes, you can directly upload on build.phonegap.com or from within Dreamweaver.
See this page for info on customizing config.xml: https://build.phonegap.com/docs/config-xml#features

How to create column selection variant for VA05?

Hi Experts,
How do I create column selection variant for VA05?
Thanks,
Sachin

Hi,
Goto SU3, enter user name and press enter
goto parameters tab, enter parameter ID SD_VARIANT_MAINTAIN and parameter value 'A' and save.
Now check in VA05, you will get save button in active mode.
Regards,
Chandra

How to get One Selection Screen for all queries?

Hi Experts,
I have three queries having selection screens. All the selection screen have the same variables, but the reports are different.
I have created a workbook having these three queries. Each time when the workbook opens, the three selection screen pops up one after the another. Same values are entered in all the selection screens.
Now the user wants only one selection screen for all the three reports. Is it possible? I tried but I do not see any way.
I think there should be some way of getting it done.
Waiting for your inputs,
With kind regards,
Shreeem

Hi
If a workbook contains multiple queries that use the same variable, you are prompted to enter the variable values again for each query. To avoid this, set the Display Duplicate Variables Only Once flag.
Goto Workbook Settings>Under Variables Tab>select Display Duplicate Variables only Once
http://help.sap.com/saphelp_nw70ehp1/helpdata/EN/54/a493f7256b43698191a2623e5a0532/frameset.htm
Hope this helps,
Aparna Duvvuri

How to create own Selection Parameter for ME2M list

Dear Sir,
We use ME2m tcode for getting list related to Purchase Order . We have been told that we can create our own "SELECTION PARAMETER" for ths report . Kindly guide us as what steps need to be done for this pl .
With Thanks and Regards
Sonia Mittal

you can also set a variant for the existing / default ME2M screen
fill all the required entries then click on GOTO >>Variants >Save as Variant
next time when you run T code ME2M, you can select the variant and run the t code
hope this will help you

How to edit the starting time for clips in properties?

Hello there ,
I’m testing the CS5 Audition right now and find it great except for one thing:
In the properties for each clip there is a starting time. But it just can’t be edited!
I can change the starting time of the whole session – yes.
But not the ones of the individual clips. Only by moving them around and that is not very precise.
Is there a way to edit this starting times for the clips by typing in numbers?
Thank you :).

AAUser777 wrote:
But wasn't that easier before?
Do I have to save any time I make a change?
As far as I'm aware, you've always had to save changes to metadata to make them permanent!
One more please:
Can't I group Clips and move them together anymore?
One more thing please:
Many people say that CS5 is worse than 3.
Why are all those people bothered?
No you can't group clips in CS5.5. And the reason that a lot of people are bothered is - because you can't group clips in CS5.5.
There are a few other reasons cited too, but I think that the lack of clip grouping may be at the top of the list, judging from the number of comments about it. If you look around the forum you will find a lot of discussion about this.

How to edit data selection(Date) for an Init Delta Infopackage

Similar Messages

Maybe you are looking for