How to edit file names.

Right click the file and choose "Rename".
Type the new name and press "Enter".

Similar Messages

How to edit file attachments in Mavricks Mail?

Does anyone know how to edit file attachments in Mavricks Mail?
Eudora, Foxmail and many other email programs allow you to simply click file attachment, open it, edit it, and FORWARD it to others.
This is extremely difficult with Mail because it forces every single incoming file attachment to be READ-ONLY which means you are forced to re-save a copy in a folder then after editing it you need to spend time to fish it out of the folder, reattach it and then forward to others. It is a huge time wasting headache not to mention polluting your system with extra copies of files.
Thanks

I believe you are missing something. I'm not on my Mac right now but there should be a setting where to save attachments and also muiltiples at one time.

How to place file names with thumbnails?

I have several thousand images that need to go online but I cannot for the life of me figure out how to add file names to the thubnails. Every bit of documentation I've read talks about adding it to the larger images only. I figured that part out but can't I have file names for the thumbnails too?

Bummer. I was hoping for a secret key to take me there. I have too
many images that can be scanned via thumbnails and for the detail
shots they can go larger. There is no way I can use this as it is with
9000+ images that need to be gone through quickly. Thanks for the
answer.
Mark

How to add file name by sqlldr

Hi All,
Can anyone kindly give me an approach to use a variable in a sql loader ctl file. I am trying to add the value before each insert of row and this value is the file name. So the question is how can I dynamically identify the input data file name, if not, is there a way I can make my SQL Loader to insert a value (file name) before each row into the table.
my control file like below ,
LOAD DATA
INTO TABLE "user"."AAA_BILL"
APPEND
REENABLE DISABLED_CONSTRAINTS
EXCEPTIONS "USER"."AAA_BILL"
FIELDS TERMINATED BY '|'
(Streamnumber ,
MSID ,
UserName,
Domain,
UserIP ,
Correlation_ID)and the loading script as below ,
for j in $(GetFileNames)
do
let i=$i+1
sqlldr user/pass control="/u01/ctrlfile/loadBILLDtl.ctl" log=$WiMAXlog$j.log data=$WiMAXsource$j bad=$WiMAXlog$j.bad
GetFileNames ()
sqlplus -s user/pass << EOF
set echo off
SET FEEDBACK OFF
SET heading off
set pagesize 50000
select bi_file_name from dbm_bill_head where bi_file_name like 'WiMAX_%' and bi_auto_status=35 order by bi_file_name;
EOF
}What I am trying to accomplish here is, I want to insert the data file name along with other data in the data file into table AAA_BILL and this table has the file name coloumn, but the data file does not contain the file name as one of its contents.
Note : my DB is 10G and OS is RHEL
any help please ,
Edited by: 876602 on 18/12/2011 05:44 ص

Hi,
Now it is working just well.
I kept 2 variables: one with the POSIX file path for my do shell script and another one (using the provided tip here) for the Applescript function.
The only problem I had left was that teh file was writen in, maybe, UTF8 so I added to the open for access a "as text" at the end to make the file as straith text file.
I always found languages like Applescript a little bit hard to learn. Strangely, I have less difficulty with Cocoa!
Thanks for avery one here!

How to generate file name dynamically in receiver FIle adapter? Please help

Dear Experts,
   I have a scenario where I need to generate output file with the name dynamically pulled from the XI payload.
   In receiver File communication channel I don't see any option where we can specify the XML path for the file name.
   For example:
   If my inbound XML structure (inbound interface) is like below:
   <filename>file123.txt</filename>
   <RootNode>
         <Element1>Product123</Element1>
   <RootNode>
From this I need to pick the filename value and generate the output file with the same value.
How can I achieve this? Please help!
Thanks & Regards
Gopal
Edited by: gopalkrishna baliga on May 3, 2011 1:10 PM

Gopal,
You can use DynamicConfiguration class for this.
You need to write UDF for this and with input of filename you want to set and map this UDF to the top level node.
Refer the below famous blog from Micheal:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
You can also use Variable substitution to get value from payload, search SDN on this.
--Divyesh Vasani

How to get file name using File adapter Sync read

Hi All,
I am using SOA 10.1.3.3 and JDEV 10.1.3.3.
I have an async bpel process.
I have to read file name in this process... so i have used file adapter sync read operation.
How can we get the file name with out payload using sync read.
For normal read (Inbound Spec)we have UseHeaders="true" property.
Is there any property for sync read to read the file name.
Please help me
Regards
PavanKumar.M
Edited by: [email protected] on Oct 27, 2009 11:23 PM

Hi Eric,
The info in the link provided by you is for a normal read.
I need to read he file name using Sync read operation.
Regards
PavanKumar.M

How to know file names & version on EBS 12.1.1

Hi guys
Please help I work with EBS 12..1.1 on HP-UX
When apply patch no. 8429053 to support financial consultant ,I read the patch read me and as required I must know the file name and version as following .
*3. Fixed File Names and versions*
*$xla/patch/115/sql/xlaaptrn.pkb 120.63.12010000.14*
and i found wrote *"cd $XLA"* then I didn't find it how to know this info
Thanks

Hi,
It's not uncommon for the documentation to omit '_TOP' from the environment variable names, unfortunately. Try 'cd $XLA_TOP' instead.
You can refer to Note 121916.1: How To Get Version of Programs, Files, and Objects Necessary for Oracle Applications? to find out how to get the version of the file you need.
(Edit: Whoops, look like I left my browser tab open too long, and Srini already answered your question. :) )
Regards,
John P.
http://only4left.jpiwowar.com
Edited by: jpiwowar on Apr 24, 2010 8:17 AM

How to edit files directly from server?

I'm new to dreamweaver (CS5) and I'm really lost when it comes to editing files directly in remote servers.
When you add a new site, you have to select a Local Site Folder. I dont mind that html editor saves auto backups to my computer, but I really dont want to download files from the server, edit them and upload them back to the server. In my work I always edit files directly over SFTP servers.
After spending time configuring DW, I can now connect to the remote server, edit a file and save it to the server (I know that really the files are automatically downloaded to my pc and sent back when saved). The only problem with this is that everytime I open a file from server, I get this annoying prompt "Do you wish to overwrite your local copy of [FILE]?"
How can I disable this for good, or is the dreamweaver just not the right tool to edit files directly from servers?

Again, if you are doing it the easy way, you don't download files from the server to edit them.
Always edit local files. Then upload them.
When you open Dreamweaver, your Files panel should be showing Local View, NOT Remote View. That way you are working with local files.
The way you're doing it here's what happens:
1. You doubleclick a file in the Files panel (Remote View)
2. Dreamweaver connects to your server and MUST download the file and related content (because the software IS NOT installed on the server and you CANNOT edit there)
3. When the file is downloaded, Dreamweaver asks if you wish to overwrite the local file because when you save it before putting the file back, your OS will not allow two files of the same name in the same location and the file MUST be saved before you can put it back.
4. You then put the file to the server, overwriting the original file.
All of that can be avoided by simply opening THE LOCAL FILE and editing it. Then you put it to the server, and overwrite the original with the edited file.
"What if someone else modifies a file on the server after I saved it, when I open and edit a local file, wont I just replace it when I upload it?"
If multiple people have access to the same files on the server, you NEED to have collaboration software so that when a change is made it can be saved by EVERYONE who has access to the site. Something like LiveCycle.
Without that your site will be a mess in no time because six different people (or more) will have six different copies of six different sites locally and they will all be working on it at the same time and it will end up like a Three Stooges movie where Larry, Curly and Moe are all cooking dinner and each adds the same ingredients at different times.

Can't Select/Edit File Name Text - they go blank

Sometimes when I try to select a file name to edit it, the name disappears when I first click it. This often happens in list view. If I switch to icon view, most of the times, but not always, I can then select the file name text. Sometimes if I switch back to list view, then I can select the file name text as expected, but again not always.
It is intermittent so I can't give any consistent info on how or when it happens.
Thanks,
Steven

Try this. Select the file and hit the enter key. Does that highlight the name without deleting it? If so, adjust your mouse click settings and see if that fixes the problem. If not, create a new admin account, log into, and see if the problem's gone. Report back.

How to delete file names from Adobe Reader list

How can I delete file names from the Adobe Reader list? I have deleted the file & it's empty, but deleted file names remain in my list & it's very annoying. I can't seem to find an option anywhere to delete the file names.

Thanks for the answer, I will try this & post my results with this method. I have set the amount to zero, & it seems if I want to put back valid files into my list I first need to find them in another file in my pc, such as documents, open them in Adobe Reader, & then then they will reappear in the Adobe Reader list. Is this correct? Thank you!
This seems to be the case, you need to restore each file you want in your list one by one by accessing them elsewhere on your pc, & then you must open them with Adobe Reader to have files reappear in your Adobe Reader list. However, this seems to be a tedious process if you only want to delete one obsolete file from your list by first emptying the list & rebuilding it file by file. It works, but I'm wondering if there is a more sensible & efficient way to do this?

How to keep file name in print queue when printing crystal report

We are using VB .Net 2003 + Crystal Report 2008 SP2 up to Fix Pack 2.6
When the VB program spools crystal report files to print queue, the print queue only shows "Crystal Report" for each document. How to keep the original file name? In the past when we were using Crystal Report 11, the original file name can be shown in the print queue.
Please help because it's so important for operation to see which report is failed in printing when reports are printed in batch.
Thanks

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

How to pass file name as parameter into url: or fo:external-graphic src

Hello gurus,
In my rtf I want to dynamically get the name of the image file and display the image in the report. If use hard coded image file name it works but if I try to get the name into a variable and pass that variable it is not working.
Basically my client is having different logos for each operating unit. in the OA_MEDIA directory there are separate logos for each OU. during run time based on OU name we need to display the corresponding image. If I can get this entire path($OA_MEDIA/logo.jpg') in XML field<?CF_OU_LOGO?> then I'm able to print the logo using url:{CF_OU_LOGO}
But I'm using seeded data source and I cant modify the data source, I need to handle this in RTF only. I could able to get the file name into a variable but not sure how to pass to url.
could some one help me on this. I tried the following options
<fo:external-graphic src="url($ln)" />
url:{$ln} in web etc...
here 'ln' is the variable which holds '$OA_MEDIA/logo.jpg'. ln is defined as <xsl:variable name="ln" select=".//CF_OPERATING_UNIT" />
later I set the values as <?xdoxslt:set_variable($_XDOCTX, 'ln',translate( concat('${OA_MEDIA}/','Logo',.//CF_OPERATING_UNIT,'.jpg'),' ',''))?><?xdoxslt:get_variable($_XDOCTX, 'ln')?>
thanks,
Vijay

Vijay
What version of EBS is the customer running? I read somewhere that in R12 all of the concurrent parameters are passed to the XMLP template. I have not tried this but if true. You could create a conc program parameter that would hold the location of the image. You could either have the user pick the image or maybe derive it from the other parameter choices.
Lets assume the token name is DLOGO you can reference that in your template.
<?param:DLOGO?>
this needs to be at the top of the template. Then where you need to embed the image just reference the value using
$DLOGO
You can embed this in the external graphic field
As I mentioned I have not tested it yet, hopefully its there, if not there are ways around it. Try it first.
Tim

How to keep file name on "Insert as new"

If a record has a related file, the file-name is stored in a field of that record.
When you open the record and choose "Insert as new" everything is copied to a new record, except this file-name.
How to save this file-name too?
thanx

Hello,
Set the PrintOption.JobTitle value for the print job. Here's C# code on how to:
               System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
            CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptionsClass();
            CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new PrintOptionsClass();
               pDoc.PrinterSettings.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PrinterName = cboCurrentPrinters.Text;
               rasPROpts.PaperSize = (CrPaperSizeEnum)
                    pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
            // this sets the name of the print job
            rasPROpts.JobTitle = "MYPrintJob";
               rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
               MessageBox.Show("Printing report.", "RAS", MessageBoxButtons.OK,MessageBoxIcon.Information );
Thank you
Don

How to get File name in Proxy program

Hi,
According to my business scenario, one XML file name comes from Legacy system and stores in a predefined directory. Now XI has to pick up that XML file and needs to call BAPI's which in turn updates the Target system ( SAP Tables).
Now my problem is , XML File name is a combination of three fileds those are DATE , OBJECTKEY AND WORKFLOWNAME.
Ex : YYYYMMDD_1234565789_WORKFLOWNAME.XML
DATE_OBJECTKEY_WORKFLOWNAME.XML
In proxy i need to get the file name and split into three fields ( those are DATE , OBJECTKEY AND WORKFLOWNAME ) which needs to send as import parameters in BAPI's.
So please let me know from anyone in this group how to get the file name in the proxy program.
Thanks & Regards
K. naveen Kumar

Hi,
have a look at my new weblog:
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
to see how you can access filename
Regards,
michal

How to print file name and date on document

How can we print the file name and date, like in the old days, on a document as a header or footer?

Not the print dialog for iWork but in the app itself. Here is Pages:
Regards,
Colin R.

How to edit file names.

Similar Messages

Maybe you are looking for