How to edit files

how do i edit my files

If you Import a document, it will be converted into a Buzzword document which you can then edit.
If you Upload a document, you will not be able to edit it.

Similar Messages

How to edit file attachments in Mavricks Mail?

Does anyone know how to edit file attachments in Mavricks Mail?
Eudora, Foxmail and many other email programs allow you to simply click file attachment, open it, edit it, and FORWARD it to others.
This is extremely difficult with Mail because it forces every single incoming file attachment to be READ-ONLY which means you are forced to re-save a copy in a folder then after editing it you need to spend time to fish it out of the folder, reattach it and then forward to others. It is a huge time wasting headache not to mention polluting your system with extra copies of files.
Thanks

I believe you are missing something. I'm not on my Mac right now but there should be a setting where to save attachments and also muiltiples at one time.

How to edit file names.

How to edit file names.

Right click the file and choose "Rename".
Type the new name and press "Enter".

How to edit files directly from server?

I'm new to dreamweaver (CS5) and I'm really lost when it comes to editing files directly in remote servers.
When you add a new site, you have to select a Local Site Folder. I dont mind that html editor saves auto backups to my computer, but I really dont want to download files from the server, edit them and upload them back to the server. In my work I always edit files directly over SFTP servers.
After spending time configuring DW, I can now connect to the remote server, edit a file and save it to the server (I know that really the files are automatically downloaded to my pc and sent back when saved). The only problem with this is that everytime I open a file from server, I get this annoying prompt "Do you wish to overwrite your local copy of [FILE]?"
How can I disable this for good, or is the dreamweaver just not the right tool to edit files directly from servers?

Again, if you are doing it the easy way, you don't download files from the server to edit them.
Always edit local files. Then upload them.
When you open Dreamweaver, your Files panel should be showing Local View, NOT Remote View. That way you are working with local files.
The way you're doing it here's what happens:
1. You doubleclick a file in the Files panel (Remote View)
2. Dreamweaver connects to your server and MUST download the file and related content (because the software IS NOT installed on the server and you CANNOT edit there)
3. When the file is downloaded, Dreamweaver asks if you wish to overwrite the local file because when you save it before putting the file back, your OS will not allow two files of the same name in the same location and the file MUST be saved before you can put it back.
4. You then put the file to the server, overwriting the original file.
All of that can be avoided by simply opening THE LOCAL FILE and editing it. Then you put it to the server, and overwrite the original with the edited file.
"What if someone else modifies a file on the server after I saved it, when I open and edit a local file, wont I just replace it when I upload it?"
If multiple people have access to the same files on the server, you NEED to have collaboration software so that when a change is made it can be saved by EVERYONE who has access to the site. Something like LiveCycle.
Without that your site will be a mess in no time because six different people (or more) will have six different copies of six different sites locally and they will all be working on it at the same time and it will end up like a Three Stooges movie where Larry, Curly and Moe are all cooking dinner and each adds the same ingredients at different times.

On iBooks in Mac, how to edit file information

I would like to add author information, etc. to some of my previously transferred books.

Hi yousufmnsr,
After reviewing your post, it sounds like you want to edit some book information in iBooks. I would recommend that you read this article, it may be able to help the issue.
How to edit book information in iBooks for Mac - Apple Support
Thanks for using Apple Support Communities.
Have a nice day,
Mario

How to edit files in Microsoft office that are read only?

So I copies all of my documents using migration assistant. Now when I go to edit a file in Word or Excel, it won't let me save the document under the same name, it says I opened it in read only. How can I correct this?

Cieritaqt wrote:
So I copies all of my documents using migration assistant.
was it transfered from a pc?

Png type not recognized in widget - how to edit file type?

Dear all,
I almost got crazy these last hours as a nice widget I am working on suddenly refused to work.
I now understand the source of the problem: the file type of the PNG background image is not "Portable Network Graphics Image" but "Adobe Photoshop PNG".
This causes the widget to refuse to load, apparently.
I can not find a way to edit this (even FileInfo does not propose PNG?)... or to make photoshop produce a generic PNG.
Has anybody encountered this problem and/or has an idea on how to solve it?
I can not imagine that there is no way in mac os x to edit the inner properties of the file..
THANKS for any hint,
Olivier.

Hi
I think there's a similar issue in Fireworks, where the native file format appears to be an extended form of PNG. In Fireworks, there's a file export command, which enables you to create a separate copy of the file in PNG (or any other) format whilst retaining the extended PNG for the master version of the file. I'm not a Photoshop user but I would look to see if there's an "export" command, and I would use it to create a separate PNG version of the file, in the hope that this does not have any of the extensions.
Bob

How to edit file 'Title' in 'Get Info' (More Info)

Hi, I hope this makes sense!
I have several MP3 Audio files saved to my music file in places. When I use the 'Get Info' function the files have a Title. Is there a way to edit this Title. I can see that the 'name & extension' can be edited but when I import into itunes it is the title that is shown.
Thanks

Thanks for the replies K T & V.K.
I can also drop the file into itunes and click on 'name' to change it. What I really want to do is as follows;
The music files all have the same 'title' but different 'name & extension'
When dropped into itunes this application uses it's title as it's name, therefore all files would have the same name in itunes!
Before putting the file into itunes if I can re-title these files it would save me loads of time.
Thanks again.

How to edit file description on the General tab of File Properties.

I have several files that are rather cryptically named. I want to put a more human friendly description in the Description field inthe Properties/General tab but am unable to access it. It seems to get automatically populated with
the name of the file, which is not helpful at all.
Is there a way to do this?
thanks,

Hi,
I just make a supplement, to add more description details to a file, you can refer to the screenshot below:
If I misunderstand your meaning, please feel free let me know.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to edit file title bar?

In Frame 7.2, when I open two or more files (stored in a folder several levels below My Documents), the path is long enough in the file title bar that it's difficult to see the file name without dragging the window to the left or shutting down some control boxes stored on the right side.
Is there a way to make Framemaker show only the file name? My alternative is to move all files up a few levels to shorten the path.
Yours,
Michael F
=======

Michael,
This is a known problem. Unless you can live with waiting for the tool tip showing the full path (at least in the most recent versions of FrameMaker), the only option is to modify this property via FDK programming. A friend of mine has a script titled In Window Title, Display File Name Only (to be used with FrameScript) in his free script collection:
http://www.i-frame.itl.info/en/feature-description/free-scripts/in-window-title-display-fi le-name-only.html
If it really bugs you, it might be worth investing the $149 for the FrameScript plug-in to run this (and other useful) scripts.
- Michael

How to edit file sent in Read-only ?

I want to add a stamp to a document that was sent to me in a read-only format to prevent modification, is this possible?

If it's just read-only you can change that setting by right-clicking the
file and going to Properties and unticking the read-only box.
If it's actually secured then you can't change that in Acrobat unless you
know the password.

How to edit a file

Ok I probably realise that I've missed something in the literature on installing arch somewhere along the way, but I've spent the last 3 hours trying to find how get past this stage to no avail.
I've managed to realise I have a dhcp connection.
For DHCP IP
For this option, you need the dhcpcd package (already available on most installations). To make use of it, edit /etc/rc.conf like this:
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
but when i type "edit /etc/rc.conf" I get a colon
I presume I'm in some kind of editor, but I can't see what I'm supposed to change and what commands to use inside the editor.
Any help gratefully received

bzzzz Arch is for competent Linux users - not knowing how to edit a file suggests that you do not fall into this category. If you wish to persevere and use Arch as a learning tool, then you need to be aware that you will be required to do most of the work yourself.
See the wiki: https://wiki.archlinux.org/index.php/FA … se_Arch.3F

How to edit the content.opf file of a FXL EPUB?

I'm exporting a fixed layout epub and I cannot find out where the content.opf file is and how to edit it. I'm trying to do the same thing that was done here: Indesign CC 2014 Fixed Layout export
Can anyone point me in the right direction? I've googled to no end!
Thanks,

Please follow these steps to edit your EPUB:
1. Download Sigil https://code.google.com/p/sigil/downloads/list
2. Open your EPUB in this editor.
3. In the book browser view on your left, look up for content.opf file. Edit this file and save your EPUB.
Regards,
Pooja
InDesign Engineering

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How to edit an XML file?

Guys, I have a podcast in iTunes, I want to start to promote it. In order to do this, I think I will have to put tags in the XML file for different sites and I would like to know how to edit this. Does anyone have any good places for me to check out how to do this?
Thanks!

Vinnie, thanks for getting back to me on this, I am pulling my hair out!
What FAQ are you speaking of? The one in iTunes or someplace on this board?
By claim, what I mean is this. Lets say I try to add my podcast to Podcast Alley's directory. If I copy and paste my RSS feed in there, it says that it needs me to add their "tag" or whatever in my RSS so they know it is my podcast. They need me to add this line in the XML file I think to "claim" my podcast so it will show up in their directory. This seems to be a common thing with other sites as they give me some XML code to add to my RSS also.
Make sense at all?

How to edit files

Similar Messages

Maybe you are looking for