How to edit font conversion in se73

Hi all,
Do you k now how to edit font conversion in se73
I can't find change mode there.
I remember that i used to change it once when i worked with 4.6C
Thanks & Regards,
Pichet A.

Hy All,
In my point of view, target conversion font datas are fill in function module 'LOAD_PRINTER'.
These are importing from data cluster.
But how configure these data ?
Anyone have a idea ?
Tkank you in advance,
Best regards,
Fabien
Edited by: Fumagalli Fabien on May 27, 2011 2:21 PM

Similar Messages

How to edit font of printer depend on size of abap list report.

Hi all,
How to edit Format type"X_65_255" of HP Laser printer when print out the same preview in abap list?
Example:
I want print as below:
     Title of abap list:                 AAAAAAAAAAAA --> size 15
    body of abap list:
                                           colum1   column2   columm3 ---> size 10
                                            s1          cccc          bbbb    -
> size 10
I need it whenever you find time out of your busy schedule.. Please help me .. Thank you so much.
Edited by: kishan P on Oct 13, 2010 12:02 PM

Hi,
I have to set font type on matrix printer.
Can You please explain how did you find
\e(s0p24h15v0s0b16602T
for
select arial 24 cpi 15 point normal
As I can see, all the escapes defined in "Printer initialization" are in
\e\0xqw\0xer0x\tz
form, where qw, er, tz are hexa decimal interpretation of escapes from printer manual.
I am confused where did You find annotation such as
\e(s0p24h15v0s3b16602T
Thank you, cheers.
p.s. - if You want me to open another subject with this question so I can express my gratitude, please let me know.
p.s. - in SPAD > Device Type, Print Control tab, we have
SF005     |     1B6B001B4D121B57001B461B35
and I know the
"1B"
stands for
\e
but then at "6b........" I am lost...

How to edit fonts in Xcode prefs ?

I would like to change the font Xcode uses to display the keywords in the text editor. Open Preferences > Fonts & Color > Category select "Keyword" > double-click > the font panel pops up, but making changes does not work at all. Only changing colors seems possible.
Any idea what I'm doing vrong ?

Frederic Hahn wrote:
I would like to change the font Xcode uses to display the keywords in the text editor. Open Preferences > Fonts & Color > Category select "Keyword" > double-click > the font panel pops up, but making changes does not work at all. Only changing colors seems possible.
Any idea what I'm doing vrong ?
Hmm. I don't have Xcode 3, just 2.4, but on that same prefs pane, look for a checkbox that says "Allow separate fonts" or something like that. When I check that, then I can set the font a different font for keywords.
charlie

How to edit a text with same font in a image in photoshop 7

how to edit a text with same font in a image in photoshop 7

Good day!
The question seems to provide insufficient information for a relevant answer.
Do you have the font?
Is the text a (Type) Layer of its own or part of the image?
Could you please post a screenshot with the Layers Panel visible?
Regards,
Pfaffenbichler

How do I add text boxes that people can edit font type, size, and color in Adobe Reader

How do I add text boxes that people can edit font type, size, and color in Adobe Reader? I am using Acrobat Pro XI.

It is possible. Add your text fields and in their Properties set them to have Rich Text Contents (under Options). This will allow the users to specify all kinds of formatting settings for those fields (by pressing Ctrl+E and using the Properties bar).

How create new font in sap

Hi,
We want use Times roman in our smart form.
i tried to load the fonts using spad and se73.
still it is not reflecting in the report.
regards,
viren.

Hi,
Apart from SE73 i think that you have to create a new print control, which will probably contain the name of the font in hexadecimal code. I am not very sure of that but you can find the following SAP note a bit helpful...
<b>SAP Note Number: 12462
How can I define a new printer font?</b>Version: 7, Note Language: EN, Released on: 28.08.1998
Symptom
Key word: Printer font
What settings have to be made to define a new font for an R/3 device type (that is, a new printer font) that can be used for SAPscript documentation output.
Additional key words
Printer, font, printer font, device type, fontmetrics, AFM file, SE73
Cause and prerequisites
You would like to use a new font on the printer.
Solution
General advice:
1. This procedure can be used only if the desired font is available on the printer (that is, installed on the printer itself, installed via font cassette, resident in the printer via softfont download or, in case of device type SAPWIN/WIN, installed on the Windows PC) and can be called with a short printer command (max. 29 bytes). This printer command is maintained in the print control.
Solution procedure:
1. The original SAP printer type used previously must be copied to a customer printer type with a name starting with Z... (see Note 3166 for reasoning behind this). The function "Utilities->Copy device type" from transaction SPAD (spool administration) is used for this.
Example: HPLJIIID is copied to ZHPLJ3.
2. A new print control SFxxx must be maintained for device type Z.... It contains in most cases the printer control commands for setting the desired font. To find out what this printer command looks like, refer to the printer manual and the print controls SFxxx already contained in printer definition Z... . A certain amount of knowledge of the printer language is a prerequisite. The xxx numbering of the SFxxx print controls is arbitrary.
NOTE: The exact contents of the SFxxx print controls depend on the SAPscript printer driver used. For information on this, consult the CD documentation ("Basis system administration printer handbook") and the field documentation (F1 help) for input field "Print control" in SE73, Printer font maintenance.
Printer driver HPL2 (PCL 5 printer):
SFxxx must contain the PCL 5 command for character set and print selection. CAUTION: As of Release 4.0A there are special rules which apply if the flag "Scalable font" is activated.
Printer driver POST (Post script printer):
SFxxx must contain the name of the Post script font, for example "Helvetica"
Printer driver PRES (Kyocera PRESCRIBE printer):
SFxxx must contain the PRESCRIBE command "FONT xx:" for font selection, for example "FONT 42;"
Printer driver SWIN (Windows print via SAPWIN/SAP1pd):
SFxxx must contain the Windows font name. CAUTION: As of Release 4.0A special rules apply if the flag "Scalable font" is activated for the printer font.
Printer driver STN2 (Target printer):
SFxxx must contain the complete command for the selection of the
character set, the increment, bold and italic print and font.
Print control SFxxx is defined for device type Z... in transaction SPAD under the heading "Print control for device type". Example: print control SF900 for device type ZHPLJ3 with replacement text (i.e. printer command)
1B28304E1B28733070313068313276307330623354 is created.
3. In the SAPscript font maintenance transaction SE73 under "Printer fonts", a new entry must be made for the desired font on the desired device type. The following information must be given:
     device type Z...
(printer type to which the font belongs)
     family   ....
(Font name used in R/3, for example COURIER, HELVE, LETGOTH, LNPRINT, TIMES)
     size      ...
(Font size 1/10 point, for example 240, for printer drivers that support scalable fonts, 000 is entered here)
     bold      .
(X if bold type, otherwise blank)
     italic    .
(X if italic type, otherwise blank)
     CPI       ..,..
(number of characters per inch (CPI)
If font is not a proportional font (for example HELVE,TIMES),
for example 05.00)
     PrtCtl 1 SFxxx
(Refer to field documentation (F1 Document) for exact meaning. The name of the 2nd created printer control is normally entered here.
     PrtCtl 2 SFxxx
Refer to field documentation (F1 document) for exact meaning. The name of the 2nd created printer control is normally entered here.
If the font is a proportional font (HELVE or TIMES), an AFM file that contains the width values for the individual characters in the font must be entered under "Printer fonts" in SE73. Direct maintenance of the AFM data is done from the list of printer fonts with Menu "Edit -> fontmetric using a menu function. To do this you place the cursor on the line with the newly created printer font and choose "Edit->Copy fontmetrics" on the menu. If you have created, for example, a new printer font
ZHPLJ3 HELVE 200 _ _
you can copy the metric of
ZHPLJ3 HELVE 160 _ _
here.
Releases before 3.0A do not have this menu function, and you must manually copy the AFM files from the group box to the new printer font via the XX.XX function in the AFM editor. Then the new AFM files can be checked for correctness (Menu "Fontmetrics ->Check") and saved.
As of Release 3.0 it is possible to establish a link to the fontmetrics of another device type or to a default (all characters with width 500) instead of copying the fontmetrics explicitly. You can check the correctness of the complete font definition in SE73 in the list of printer fonts with the function "Edit->Generate font def.".
4. As a final step, the device type of the output device used must be changed from the SAP original to the new printer definition Z... in transaction SPAD. This is done in SPAD under the heading "Output devices".
Example: printer LP05 previously had device type HPLJIIID and is now being given device type ZHPLJ3.
Source code corrections
Thanks and Regards,
Bharat Kumar Reddy.V

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

How to change font size of lyrics in iTunes

I pasted Arabic lyrics onto the Lyrics tab of a song. However, the font is too small to read easily.
Can someone please tell me how to change lyrics font size?

See if either of these provide help:
Edit font iTunes uses - Gnarlodious Jun 20, 2014 - https://discussions.apple.com/thread/6408851 - presumably could be changed to any valid font available in OSX
Re: I want iTunes to show text that is readable!

Font conversion of symbols

Before purchasing I would like to know how the font conversion works and if there are further settings once purchased. In my free trial I converted a simple music chord chart (lyrics and chords only, not notation) and though it did a fair job of conversion, the flat signs were missing. I do have notation fonts installed on my PC and need to know if this can be set to recognize upon conversion or not. This would be my primary reason for even purchasing the converter being a worship leader and needing the flexibility to alter charts, etc.
Here is a sample of what it converted, though missing the flat sign after the 'E's: etc. (the cut/paste misaligned some placement, otherwise that wasn't too bad after conversion)
Through It All
Words and Music by Andrae Crouch
Verse 1
E
Key -E
I've had many tears and sorrows
E maj7
I've had questions for tomorrow
E 7
There've been times I didn't know right from wrong
0 9                                       E                   C7
But in ev'ry situation God gave blessed conso-lation
Fm                   8 7                      E    Fm7    8 7
That my trials come to only make me strong
Chorus
E              E 7     A              Fm
Through it all       through it all
B                   Cm/B    8 7
I've learned to trust   in       Jesus
E          Cm7 8 7 E I've learned to trust          in God
E              E 7     A              Fm
Through it all       through it all
F7       B
Cm/B    8 7
E   A /E
E
I've learned
to de   -   pend    upon
His word

Could you try disabling the 'Recognize Text' function and converting your document again? I've seen mixed results in the past with converting guitar tab pages. This has helped in some cases.
-David

How to set the conversation id programmatically in a BPM process

Hi all,
I am using BPM/SOA 11g PS3.
Is it possible to set the conversation id programmatically in a BPM process starting with a none start event?
I know I can set it easily if I use a BPM process starting with a message start event.
All I have to do is set it in the "wsa:MessageID" node in SOAP Header when I initiate the process instance.
However, I have no idea how to set the conversation id programmatically in a BPM process starting with a none start event.
I looked for if there is any appropriate method in the Java api for the process instance management, such as IInstanceManagementService and CompositeInstance, but no method seems to be appropriate.
Does anyone know how to do this?
Regards,
Kenji
Edited by: Kenji Imamura on 2011/04/20 0:10

Hi fifty,
Did you get a solution to the above problem you have mentioned? I have a similar issue i am trying to fix.
I have a webservice call in a process activity and if the call does not work i get a soap fault and the fuego.lang.ComponentExecutionException . My process requires that i catch the exception infact any kind of exceptions that occur on that call and perform another activity in the process.
I have defined an exception handler at the activity level for java.lang.Exception and java.lang.RunTimeException.
i don't see anything in the catalog which would handle the SOAP fault OR the componentexception.

How to Edit PSD Files In Flash Template

Hi Everyone,
I am new to flash and I am trying to create my first flash site using a template that I have downloaded. I can edit the first page fine, but when I click the "about us" or any other section, the standard template text, Which isn't even in english, appears. I believe that these are psd files, and I have tried to edit them, saved and replaced file on my computer, but still I get the same unchanged text on this site when I preview. Could someone please tell me how to edit and replace these files within the flash movie?

Instance names are the reference names that you give to the individual items on the stage. Only movieClip and button symbols can have instance names.
When you import a photoshop file to Flash you will get individual bitmap objects on the stage and in a folder in the movie's Library. You will need to select each item, one at a time, on the stage and convert each one to a symbol. When you make that conversion the name that you give to that new movieClip or button is the name that you will see in the Library.
When you select that new symbol on the stage, look at the Properties window. You will now see a space at the top where you can give that item an instance name. The instance name is what you will use in Actionscript to control that object on the stage.
When you look in the movie's Library, you will see the original bitmap and the symbol that you created that contains that bitmap.
Does that help?

How to change font in just one column of JTable

I have a table with 4 column.
I want to have Courier font in column number 2, and Arial in columns number 1, 3 and 4.
With:
table.setFont(new Font("Courier New", Font.PLAIN, 12));
I can set fonts in all columns but how to set font in just one column.
Thanks
Srdan

Hi,
there are 2 methods of JTable where every rendering resp. editing component "comes" through - prepareRenderer(...) and prepareEditor(....) - by overwriting this methods and calling its super method first you get the component and can manipulate it before you return it. This component is exactly that, what is used for rendering resp. editing afterwards.
greetings Marsian

How to Edit Comment Tag in DW CS3?

I would like to customize the HTML comment tag for my own
preferences. I know how to edit the colors and font under
Preferences, but I would like to change the whole tag and add some
more spaces and dashes. How do I edit this in DW CS3?
Thanks..

That's invalid, I believe. You cannot have more than two
dashes on either
side, as I recall.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Macronutz" <[email protected]> wrote in
message
news:f63tkh$222$[email protected]..
> For example, DW currently write the HTML comment tag as:

>
> But I want to change it so that comments tags appear
differently, with
> more
> dashes and spaces, for example:
>
> 
>
>

How to use content conversion for Complex structure

Hi All,
I want to know how to use content conversion for the following complex structure:
Data
...Details            1 to Unbound
.....Header           1 to 1
.......HF1
.......HF2
.......HF3
.......ITEM           1 to unbound
.........ITF1
.........ITF2
all are of type string.
Thanks & Regards,
Viswanath
Message was edited by: Viswanath Mente

Hi,
In the content conversion,
give ur
1.document name as message type
2.give ur recordstructure as Details,,Header,1,ITEM,
3.mention ur keyfield.
conversion parameter
Header.fieldFixedLength - give the field lengths
Header.fieldNames=mention all the field name
Header.keyField=enter the value of keyfield
Header.endSeparator='nl'
repeat the same for Item
regards
jithesh

How to add fonts to Font window

I use a variety of fonts in Pages and I would like to know how to move fonts (really the names of fonts, like Baskerville, Helvetica, etc.) into that little box that appears when you click on Fonts .... I have about 6 in that box or window now but I can't figure out how I got them there long ago. Also, once they are in the box ... how do I delete one or more, selectively. Many thanks for answering this simple question.

Mr SeekHelp. I tried to tell you that you can only have the last six font you have used there in that box. You can't add more. They will change when you use other fonts. You have to look in the long list if you want to use another one then the last six fonts you have used. That is the way Pages works.
You do not move anything from the Font palette window. You can select it and start writing. It is just another option to select a font.
What you could do is creating in the Font Book a collection of your favourite fonts. Give the collection a name. In the Pages Font palette you can choose to just see that collection of fonts. Choose the font you want to use for the moment and start writing.
Edit:
I am learning while i try to help you. you do not have to go to the Font Book to create the collection. You can do it right in the Font palette. I didn't know that until now as I haven't had any need for it.
Click on the plus sign
Give the collection a name
Select All fonts and drag selected fonts to you new collection
Click on the collection name to see that you have your chosen fonts in the collection.
Select a font and start writing!

How to edit font conversion in se73

Similar Messages

Maybe you are looking for