How to edit footage in the same sequence from two different cameras:  1) Standard Def 4:3 aspect ratio, and 2) Standard Def shot 16:9, anamorphic?

What can I say.  We blew the shoot.  His high-end Sony camera - std def at 4:3 aspect ratio.
My camera - the little Panasonic DVX100, set to anamorphic, so 16:9 aspect ratio.
I have to edit this footage together in the same sequence.  Obviously, I'm getting prompts to change the sequence settings every time I try to move footage onto the timeline.
Alternatively, would someone just thunk me in the head. 
I'm sad about this.  I can't believe it happened.

What is the ouput - standard 4:3 DV?
If so, put a clip of the 4:3 material into a timeline and accept the offer to conform the timeline to that material. Then, any of the 16:9 material will be part of that settings - however - you will want to go into the DISTORT settings in the Viewer to alter the material so that the image extends beyond the sides (aka a center cut). It has been a long time since I've done this but I remember the number is something like 33 (or -33).
x

Similar Messages

  • How to handle an update of the same record from two different user JSP

    how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

    I'm not sure whether I understand your question. If one user changes a record then you would like other users to see those changes. Normally those changes will be visible to other users when they refresh their browser, after the first user has committed changes to the record. I you want to be sure that the same row isn't updated at the same time by to different user, you need to configure some locking (pessimistic locking) - this depends of what technology you use. In EJB3 pessimistic locking is performed by adding a version to every entity object. If you are using ADF, the framework is able to handle either pessimistic or even optimistic locking.
    If you want the changed row to be updated in other users browsers without any user interaction by these users, you should take a look at Reverse Ajax (ex. DWR http://ajaxian.com/archives/reverse-ajax-with-dwr) - or Ajax in general. But you will never get a realtime solution, where changes is visible in other users browsers right after each record update.

  • How to handle an update of the same record from two different user  in JSP

    how to handle an update of the same record from two different user
    how do you handle an update of the same record from two different users in JSP... if one person updates the record from one drop downs should be updated as well.. is the possible.

    Usually, if two users try to update the same row at the same time, you want the first to commit to succeed, and when the second commits, they should fail with the error that the row was being concurrently updated. They you may want to show them the new row values and give them the opportunity to merge their values with the new row values...
    How can you achieve this? Google optimistic locking.

  • Working on the same website from two different computers

    So I have a mac running iweb09 at work and a macbook with iweb08 on it and I would like to be able to work on the web page from both of these computers. Any suggestions or am I wishing for too much?

    So I have a mac running iweb09 at work and a macbook with iweb08 on it and I would like to be able to work on the web page from both of these computers. Any suggestions or am I wishing for too much?
    you can transfer Domain.sites2 between the two machines.
    but you should have the same iweb version on both machine. otherwise, you will run into hassle of this:
    http://discussions.apple.com/thread.jspa?messageID=9382549&#9382549

  • How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)

    How can i buy again the same software from the same mac? (where it is installed and runs ok: it is for licences issues)
    Thanks for your help.

    Hi ..
    You can redownload previously purchased apps from the App Store using the same Apple ID on all your authorized Macs for free.
    How to re download apps from the Mac App Store:
    Open the App Store. From the menu bar click Store > Sign In
    Click Purchases from the top of the App Store window.
    Select which apps you want to re download. Then right or control click where you see Installed  then click Install.
    Make sure and use the same Apple ID used for the original purchase.

  • How can i use the same id on two different laptops?

    When trying to use the same login on two different laptops so that i can connect my nook to either depending on which one is free, i get the error that the id is already in use on another computer?

    The issue is embedded in the way the software works.  To comply with the
    Digital Millenium Copyright Act of 2000, all software companies in this
    business keep track of where their software is installed, making
    information about the computer and ereaders part of an ID file.  So, your
    user ID is embedded in the ID file of each computer, but each computer has
    a different ID of its own that is also embedded in that file.  Adobe's
    master server (yes, there is one that you connect to even if you didn't
    know it) also has that information, and when you try to use an ID on one
    that's embedded in the file of another, Adobe's server blows the whistle,
    and as you can see, you can't do that....
    ==========

  • I would like to import two different cf cards from two different cameras into the same project/folder and have them be in order of the times they were taken, is there a trick?

    I would like to import two different cf cards from two different cameras into the same project/folder and have them be in the order of the times they were taken, any ideas on how to do this?

    Just import them normally and sort the project by date. They will fall into place. If you tried this and it isn;t happening then make sure the data and times on the two cameras are identical and make sure you are sorting by date and time and nothing else.

  • Urgent ! Assigning (or Linking ) the same workbook into two different roles

    Hi Gurus,
    Coul you tell how to link the same workbook to two different roles.
    I am assigning the same workbook to two different roles, but in the second role the workbook is displaying with different structure than in the first role. I want the workbook should be displayed with same structure in both the roles.
    This is Urgernt.
    Thanks in advance.
    Best regards
    Hari

    Hello hari,
    Both the roles should diplay the same layout for a single workbook.
    please ensure that both the users(with these 2 roles) have similar (all the other)authorisations.
    it's possible that one of the users may have further restrictions in authorisations. check out for z-authorisation objects if any.
    hope it helps..
    thanks,
    (*Don't forget to Assign points on SDN)

  • Use two indicators for the same variable in two different VIs

    hello, I want to use two indicators for the same variable in two different VIs running at the same time
    should I use global variables?? I want to avoid because I have lot of variables and it would takes too much memory,I tried with this code but the value of the second indicator is not updated 
    I tried to use the queue and it works but the problem is as i said previously that i have many variables shoud I use a queue for each one??
    what should I do?
    thank you in advance
    cordialy
    Attachments:
    projet.zip ‏13 KB

    CrisSTine01 wrote:
    hello, I want to use two indicators for the same variable in two different VIs running at the same time
    I'm a huge fan of User Events to send updates to GUIs from who knows where.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

    Can I put the same information on two different i-phones with different numbers and different ID's?

    Yes and no it really depends on what information you are putting on the devices.

  • HT2498 If I use camera window to download my pictures to my computer, and then I copy and paste the pictures to iPhoto. Would I be ending up having the same pictures in two different files in my computer, and so wasting space in my hard drive?

    I recently bought a canon camera. The instructions of the camara recommend to use the canon software (camara window) to download pictures to my computer.  I would like to have my pictures in i-photo because it syncs them to my ipad.
    I want to download the pictures from my camera to camara window, and then drag and drop the pictures to i-photo. If I keep my pictures in both programs would I be wasting space in my computer hard drive by having the same pictures in two different files?

    Yes.
    Ignore the Canon software. It gains you nothing and adds complexity. Just use iPhoto for the lot.
    Regards
    TD

  • Is it possible to use the same Switch for two different clusters.

    I have 10g Rac setup on windows.
    Now I am planning to install 11gR2 on different servers.
    Is it possible to use the same Switch for two different clusters.

    user9198027 wrote:
    I have 10g Rac setup on windows.
    Now I am planning to install 11gR2 on different servers.
    Is it possible to use the same Switch for two different clusters.
    Yes.  Technically there will not be any conflict as long as the private addresses used by the 2 clusters do not collide, and provided that the switch's port capacity and bandwidth will not be exceeded.
    Your NA (netadmin) can also configure the switch to separate the 2 Interconnects from one another (called partitioning when using Infiniband) - if the switch supports such features.
    A major consideration is not to make the switch, public. That typically cause a range of problems and can have a serious impact on an Interconnect. But using 2 private networks on the same infrastructure should not have the same problems - if configured and implemented correctly.

  • Possible solution to avoid deadlock when two inserts happen on same table from two different machines.

    Possible solution to avoid deadlock when two inserts happen on same table from two different machines.
    Below are the details from deadlock trace.
    Deadlock encountered .... Printing deadlock information
    Wait-for graph
    NULL
    Node:1
    KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
    Grant List 2:
    Owner:0x00000013F494A980 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:376 ECID:0 XactLockInfo: 0x000000055014F400
    SPID: 376 ECID: 0 Statement Type: INSERT Line #: 70
    Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
    Requested by:
    ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
    NULL
    Node:2
    KEY: 8:72057594811318272 (ffffffffffff) CleanCnt:3 Mode:RangeS-S Flags: 0x1
    Grant List 2:
    Owner:0x0000000B3486A780 Mode: RangeS-S Flg:0x40 Ref:0 Life:02000000 SPID:238 ECID:0 XactLockInfo: 0x0000002AA53383F0
    SPID: 238 ECID: 0 Statement Type: INSERT Line #: 70
    Input Buf: RPC Event: Proc [Database Id = 8 Object Id = 89923542]
    Requested by:
    ResType:LockOwner Stype:'OR'Xdes:0x000000055014F3C0 Mode: RangeI-N SPID:376 BatchID:0 ECID:0 TaskProxy:(0x000000080426E538) Value:0x30614e80 Cost:(0/41748)
    NULL
    Victim Resource Owner:
    ResType:LockOwner Stype:'OR'Xdes:0x0000002AA53383B0 Mode: RangeI-N SPID:238 BatchID:0 ECID:0 TaskProxy:(0x00000027669B4538) Value:0x10d8d500 Cost:(0/38828)
    deadlock-list
    deadlock victim=process5daddc8
    process-list
    process id=process5daddc8 taskpriority=0 logused=38828 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994026815 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.347 XDES=0x2aa53383b0 lockMode=RangeI-N schedulerid=43 kpid=14156 status=suspended spid=238 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.463 lastbatchcompleted=2014-07-25T12:46:57.463 clientapp=pa hostname=pa02 hostpid=1596 loginname=myuser isolationlevel=serializable (4) xactid=2994026815 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
    executionStack
    frame procname=mydb.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
    INSERT INTO [dbo].[Prod1] .....
    inputbuf
    Proc [Database Id = 8 Object Id = 89923542]
    process id=process5d84988 taskpriority=0 logused=41748 waitresource=KEY: 8:72057594811318272 (ffffffffffff) waittime=2444 ownerId=2994024748 transactionname=user_transaction lasttranstarted=2014-07-25T12:46:57.320 XDES=0x55014f3c0 lockMode=RangeI-N schedulerid=39 kpid=14292 status=suspended spid=376 sbid=0 ecid=0 priority=0 trancount=2 lastbatchstarted=2014-07-25T12:46:57.440 lastbatchcompleted=2014-07-25T12:46:57.440 clientapp=pa hostname=pa01 hostpid=1548 loginname=myuser isolationlevel=serializable (4) xactid=2994024748 currentdb=8 lockTimeout=4294967295 clientoption1=671088672 clientoption2=128056
    executionStack
    frame procname=pa.dbo.SaveBill line=70 stmtstart=6148 stmtend=8060 sqlhandle=0x03000800d61f5c056bd3860170a300000100000000000000
    INSERT INTO [dbo].[Prod1]....
    inputbuf
    Proc [Database Id = 8 Object Id = 89923542]
    resource-list
    keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
    owner-list
    owner id=process5d84988 mode=RangeS-S
    waiter-list
    waiter id=process5daddc8 mode=RangeI-N requestType=convert
    keylock hobtid=72057594811318272 dbid=8 objectname=pa.dbo.prod1 indexname=PK_a id=lock1608ee1380 mode=RangeS-S associatedObjectId=72057594811318272
    owner-list
    owner id=process5daddc8 mode=RangeS-S
    waiter-list
    waiter id=process5d84988 mode=RangeI-N requestType=convert

    Don't know. Perhaps these can help. I scanned the second link but didn't see much about Ending Deadlocks. I'd say the Fourth link probably has better information than the first three links. But maybe read them all just in case the Fourth is missing something
    one of the first three have.
    Deadlocking
    Detecting and Ending Deadlocks
    Minimizing Deadlocks
    Handling Deadlocks in SQL Server
    Google search for "SQL Deadlock"
    La vida loca

  • Cannot Upload all edited Images of the same Image from Organisor

    Can anyone tell me how I can upload edited verions of the same image using the Share Option to create an Online Album in Adobe Showcase?  Only the most recent image will upload.  If you have any ideas to adress this problem, I would appreciate your cooperation in forwarding them to me.  Regards

    Right click on the edited files > Version Set > Convert Version Set to Individual Items and now try to upload. See if that helps ?
    Thanks

  • How do i make the same song have two different genre

    how do i make the same song have 2 different genre for 2 different playlist?

    In my example, we will create a Smart Playlist that includes all songs in the genre Acid Jazz and one extra song that has the genre of Afro-beat. That extra song will be "Music For Gong Gong". To create your Smart Playlist, substitute the genre types and the song title (anything with <  > around it) for the ones you want.
    In your iTunes Library, either click on the + symbol in the lower left corner of iTunes playlists, or click CTRL+ALT+N to create a New Smart Playlist. The following will appear (my orange numbering):
    1. Using the drop-down menus, change "Artist" to Genre, "contains" to is and in the text box (marked 1) type in the text <Acid Jazz> (remember to chose the genre you want, and with the exact spelling used for that genre in your library - don't type in the <  > obviously!)
    2. Click on the + symbol at the end of that line (marked 2), which creates an additional line
    3. In this new line, change "Artist" to Grouping, change "contains" to is and in the text box type in <Acid Jazz> (Notice that I have used the same name as the genre itself. You don''t have to, but it makes it easier to add those extra songs. You'll understand why in step 7.) You now have a box like this:
    4. Change the Match rule at the top (notice it has already changed in the two screenshots above) to any. This is a crucial step, do not forget it.
    5. Notice that I have also selected Match only ticked items. This is optional, but selecting it will exclude songs that have been unticked. If you use Sync only ticked songs and videos, this can be useful way of keeping the Playlist the same as the one on your device.
    6. Click the OK button. You now have the opportunity to name your Playlist. I have chosen <Genre is Acid Jazz +> so that it is obvious what it is.
    So that's the Playlist created. As you can see, <Genre is Acid Jazz +> has 89 songs in it and I can assure you that's how many songs are in the Acid Jazz genre section. Now, all that remains is to add the additional song.
    7. Find your "two-genre" song and click File/Get Info/Info (or CTRL+I - that's an "eye") to bring up the edit song option. In the Grouping field, type in <Acid Jazz> (remember to use the same text you used in the Grouping box in step 3. This means you only have to type in the same genre name to the Grouping box,  to get it into that particular Playlist. I mentioned this in step 3).
    Notice that we are not changing the Genre. Click the OK button.
    Now look at the Playlist <Genre is Acid Jazz +> again.
    Notice that is now has 90 songs and at number 60 is the <Music For Gong Gong>. Note that the genre for that song is still Afro-beat, so the song still appears in the genre Afro-beat as well.
    To add any other song to this particular two-genre Playlist, simply find the song in your Library and type <Acid Jazz> into the Grouping box, as in step 7. It's that simple!
    Here's an extra tip. Too many Playlists and having issues finding your way through them?
    I have renamed the Playlist Genre is Acid Jazz + so that it is now named Acid Jazz Plus and I've dropped it into a Playlists Folder named GENRES (capitals makes it easy to find the folders on iDevices).
    Notice that here in iTunes, Playlists are sorted in the following order:
    Playlist Folders (and then the Smart Playlists and Regular Playlists inside it)
    Smart Playlists
    Regular Playlists
    ... but on my iPod Classic (for example), they are sorted in alphabetical order. So to find the Playlist Acid Jazz Plus, go into the Playlists menu and scroll down to G, go into GENRES, and in there will be Acid Jazz Plus, with all 90 songs!
    I hope you will give this a try, you have nothing to lose but a little time. Let us (all) know how you get on with it. We'd like to know.

Maybe you are looking for