How to edit HDV and HD 24F together?

Please help! I just did a 2-camera shoot, on Canon HV 40s. The problem is that my partner and I were in two different recording modes: HDV and HD 24f.
I am new to HD, and really don't know much about it. What is the difference between the two modes, and will it affect the look of my project when I edit footage together from the two modes?

I'd suggest using Streamclip to converty the 24F footage to the specs of the HDV camera footage.
I'm not a Canon user but I think 24F is 24 progressive.
FCE does not work directly with 24 fps.
Al

Similar Messages

HOW TO USE LOGICAL AND OR CONDITION TOGETHER

Please do not post subject in ALL CAPITALS
Hi All there,
How to use logical and or condition together
I wanted to use logical AND OR condition together in where clause of Select Query.
eg where xyz and or abc
Regards
Sagar
Edited by: Matt on Mar 17, 2009 1:05 PM
Edited by: Matt on Mar 17, 2009 1:05 PM

hi,
You cannot use the logical and or condition together at the same time in SQL statement. Sachin is correct while using the and and or in the same condition. You can get the data using or condition in SQL statement, and then use the delete statement of internal table using the end condition. please find the following code for the same.
select *
from dtab
where cond1 eq 'A1'
or cond2 eq 'A2'.
if sy-subrc eq 0.
delete itab where cond1 eq 'A1' and 'A2'.
endif.
regards,
Veeresh

How to edit custom and/or user dictionaries in OPPM v.9 (NOT P6)

Hi All:
Thanx, Sachim for your help on my earlier question.
Now that I have poked around a little more, I realized that I haven't seen anything about how to EDIT the dictionary files once created. The "organizational custom dictionary" text file could just be edited with any text editor, but what about the other available OPPM dictionaries?
I've also noticed that if a User adds a word, it goes into his/her personal dictionary. That means that its not available to other Users. How does one clean them up of accidentally (or unintentionally) added mis-spelled words? Every other application I've ever used with a spell checker has that function somewhere, but I can't see it in OPPM. It would be great to be able, as an Administrator, to be able to "harvest" those added words, to share with the other users.
Anyone have any info on these issues? Thanx in advance.

if you are using 12.1.3/4 then you can do using "Define Parameter" screen to create LOV and attach to integrator.

How to edit width and spacing of bars in Numbers?

I have a graph with 4 bars, each in a different series/set so I could edit the standard deviations separately, but they're spaced far apart and the bars are really narrow. I put the gaps between columns and sets at 0% and that didn't do much. Any way to manually widen the bars and/or move them closer together?

When I have each of the values in the same series and go to use Custom Error Values, I am only able to set one standard deviation for all of the bars, instead of one for each. That gave me this:
As I mentioned in the first post, I manipulated both the gaps between columns and sets, which only let me get the bars this wide and this close together:
This issue is something I've searched extensively, and I think the lack of customization ability might just be an error in the program itself and might not be something they offer (but should).

How to edit PSA and continue the load with corrected data from PSA.

Hi,
Can you guide me on how to edit data in PSA and then continue a load?
i.e. if you can provide me with the steps on how to fix a load problem if a load fails. The load fails and Monitor shows red, so how do I fix them in the PSA and then allow the load continue with the corrected data into the data target.
I will appreciate the details steps involved.
Thanks

Hi
First select that request then turn to Red and delete the Request , delete the qeruest then system allow to edit the psa data ,selete psa then selet packet then selet record double click modify the data, dont forget after completing save the data. after competing modification then select psa right click select- start update immediatly......
thanks
ram

How to set speaker and headphone volume together T540p

My new Thinkpoad sets the headphone and speaker volume separately. I am always adjusting as I use headphones and speakers at different times frequently.
I would lke the volumes to be synchronized and change both together using the volume key.
Can this be set?
thanks all

Only if you?switch to?Audio Creation, open the mode console, set the speakers as 4.0 and in the 'Multi-Channel Wave' tab enable the bus routing for Fronts and Rears in the 'Wave' column. The downside is that this will disable EAX 4/5. BTW it's better to plug the headphones in the line-out (especially if the hp are low-impedance), the opamp driving the line-out has more output current headroom.

Edit HDV and DV together

I want to edit clips from different tapes into one movie, some of the tapes are DV and some are HVD (DV CAM)
But when I put the clips on the sequence it's always one of the clips that wanst to be renderd (depend on what sequens setting i use).
the question is if I can edit the HVD and the DV on the same sequens with out redering the entire clip.

You're still going to have to render it. Their two different fram sizes. One is highly compressed MPEG 2. If they're both widescreen, one is anamorphic and the other is not. Completely different animals.
There's no way around having to render one or the other if you're working with two formats. You'll have to make a decision based on which format you have more footage of, what your end product is, etc.
You can always downconvert the HDV out of the camera and capture as DV. That way you'll have all DV footage and not have to render.

How does systemd, wpa_supplicant, and dhcpcd work together? rtl8188su

I'm running arch with alarm (done a pacman -Syu to get latest everything) on an original Raspberry Pi model B.
I'm using a Belkin USB adapter which is really a Realtek rtl8188su chip, which is recognized with the r8712u module. I want to do it all from the command line (not running a GUI, as this Pi won't be having a display attached.)
The system recognizes the built-in Ethernet, and dhcpcd assigns it an IP address, so I can SSH into it and try to bring up the wlan0 interface.
I'm an old-school Linux/UNIX hacker, but I haven't had a lot of experience with systemd, nor with wpa_supplicant or even much of udev, so I'm a bit lost in trying to make this work.
I made sure wpa_supplicant and wpa_cli were installed. Then I edited /etc/wpa_supplicant/wpa_supplicant.conf to add my ssid/passphrase, and saved it as /etc/wpa_supplicant/wpa_supplicant.wlan0.conf. I also did "systemctl enable wpa_supplicant," and I've rebooted.
The status of the system is that it does not enable the wlan0 interface. Further, the wpa_cli tool does not work. If I run just "wpa_cli" or with a command like "wpa_cli list" then I get the error:
could not connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
This is weird, because wpa_supplicant is running in dbus listen mode:
[root@alarmpi ~]# ps alx | grep [w]pa
0 0 94 1 20 0 5636 1416 poll_s Ss ? 0:00 /usr/sbin//wpa_supplicant -u
Each time I boot, I get this message in /dev/log/messages.log:
Nov 10 01:40:06 alarmpi kernel: [ 648.082619] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Now, if I insted does "systemctp stop wpa_supplicant" and start it manually, it does bring up the interface:
[root@alarmpi ~]# wpa_supplicant -i wlan0 -D wext -c /etc/wpa_supplicant/wpa_supplicant.wlan0.conf
wlan0: Trying to associate with a0:21:b7:63:a1:98 (SSID='jwatte' freq=2462 MHz)
wlan0: Associated with a0:21:b7:63:a1:98
wlan0: WPA: Key negotiation completed with a0:21:b7:63:a1:98 [PTK=CCMP GTK=CCMP]
wlan0: CTRL-EVENT-CONNECTED - Connection to a0:21:b7:63:a1:98 completed (auth) [id=0 id_str=]
[root@alarmpi ~]# ifconfig wlan0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::a86:3bff:feb4:c21a prefixlen 64 scopeid 0x20<link>
ether 08:86:3b:b4:c2:1a txqueuelen 1000 (Ethernet)
RX packets 30 bytes 3813 (3.7 KiB)
RX errors 0 dropped 1 overruns 0 frame 0
TX packets 5 bytes 610 (610.0 B)
TX errors 0 dropped 1 overruns 0 carrier 0 collisions 0
[root@alarmpi ~]#
However, dhcpcd is not auto-launched to provide an IP address to the interface.
So, how is this supposed to work? How am I supposed to configure the system so that all the pieces click together? It should start wpa_supplicant with the right config data, and/or configure it over dbus correctly, and it should make sure dhcpcd is then invoked to obtain an IP address. I have *no idea* how to actually configure this to do the right thing, because all the tutorials and documentation I can find on the web is either very abstract ("services live in /usr/lib/systemd/...") or just claim that things "will magically work" if I have the correct configuration.
Help! Don't know what to do next!

Your manual wpa_supplicant invocation result looks good, so the major hurdle you have taken already.
For wireless you need a management method that acts as interface to wpa_supplicant and dhcp and watches the connection. Before you browse off to archlinuxarm, also read the non-abstract introduction here: https://wiki.archlinux.org/index.php/Wi … management

Editing SD and HD footage together in one project in FCE

I have both SD and HD footage that I have imported (in addition to still shots) into a project, which is now ready to edit in FCE. This is my wedding video and I would love to avoid as many problems as possible before I get too far down the road in editing. Is there anything I should know about combining the SD and HD footage in FCE? Are there certain settings that I should check before editing? I am concerned about aspect ratios and how that might ultimately skew the picture when burned to a DVD. Any basic guidelines that you could provide would be very helpful. Thanks!

This is great information, thank you. After reading the responses, (and doing some additional research) I think I'll try create a shortened version of the video using only the HD footage and share via youtube and/or vimeo. I would also like to produce a longer video (under 1 hour) that includes both my DV and HD footage and burn that DVD for a few people. Given that I will be burning this to DVD, it seems that I should downsize the HD footage before editing to have it all at the DV level for one sequence in my FCE project. I have two questions for creating this longer video with the output to DVD:
1) How to downsize the HD footage: there seems to be several suggestions for this process, so I was wondering which is the most effective (and least time consuming). Please note that I have already loaded all the clips (DV and HD clips) and still photos into a new project, which took some time. I hope to be able to leverage that effort in some way (so I don't have to start from scratch again).
     a) Convert the HD footage using Streamclip before bringing it into the project
     b) Select the HD clips and export using Quicktime Conversion, select the DV codec, and resize for DV aspect ratio pixels (either 720 x 365 to match 4:3 DV aspect ratio, or 720 x 405 to match the 16:9 DV aspect ratio)
     c) Put all the HD clips in the project and do a batch export to DV
     d) Create a DV sequence in FCE and drag all HD clips to the timeline, which will automatically downsize them and will then require rendering
     e) Create a DV sequence in FCE and drag all HD clips to the timeline, then highlight all the HD clips, go to Modify > Fit to Sequence, which should resize it to match the sequence settings
     f) Resize the HD footage using a 3rd party app called Compressor before bringing it into the project
2) Do I still need to crop the footage even after downsizing the HD footage? I assume that "crop" means that the image will stil be too big for the DV level editing, so part of the image will not fit, so I will need to scale it (or something like that). Is that right? It seems very labor intensive to do that for every clip, hopefully this is not the case.
Thank you for your help!

How to edit tracks and disc number?

I have the iPod Classic 160GB, and I have a Windows 7 desktop PC which has the latest version of iTunes. I am not sure what is the latest, but I always have it up to date.
I have a lot of playlists for my iPod, and I have it labeled by the albums, so in that particular playlist are my songs. Some are multi disc meaning some are two, or more, or some are a complete box set. I know for a fact I'm not doing this right. In my playlist, I drag over every disc of that album, and track numbers, and disc numbers are one big line of songs. Pretty much I would like to group my disc 1 together, and when all tracks play of disc 1 then it plays the next disc, and so on. Could someone please explain how in steps?
Thank you,

I have to sleep... I live in the UK. Your last two posts were at 02:16 and 05:59 respectively. Like anyone else helping out here I'm doing so in my spare time. And you should have all the information by now... For a multi-disc CD give each disc the correct disc number, then give each disc the same album name. If you choose the right column to sort on (Album) the CDs are listed in order with the tracks listed in order within each CD.
In the screenshot you posted you should enable the Track # and Album Artist columns so you can see clearly what is going on.
In fact for a fuller picture, turn on the columns for Track #, Disk #, Album, Sort Album, Artist, Sort Artist, Album Artist and Sort Album Artist so you can see all the factors influencing the sort.
If you sort on the Album column, set to read Album by Artist, then sorting is controlled by the first non-empty value from the following fields: Sort Album Artist, Album Artist, Sort Artist, Artist, then by Sort Album or Album, then Disk #, then Track #.
tt2

Editing video and audio tracks together in timeline

I've had problems regarding the editing of audio and video tracks. For example, if I have a clip (1v, 2a tracks) that I put in the timeline and try to cut it using the razor blade, it will only cut the video track. Before, I used to be able to click only once and all the associated tracks (the 2 audio ones in this example) cut together at the same point. I know it's possibly a keyboard shortcut or something like that, but I've looked and looked and now it's making me crazy.

You probably need to turn Linking on (Command L). There is a little button on the upper right corner of the timeline that looks like a chain, click it.
If that doesn't work, you could use the Blade All tool, press B twice.
Message was edited by: Michael Trauffer

How to delete parent and child records together ?

Hi,
I'm using Jdeveloper 11.1.2.2
I want to delete a row from a table but it is showing: Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-02292: integrity constraint (TABLE1_TL_FK1) violated - child record found.So how can I delete a Child row and table row in one method ?
I cannot access the child's VO because it is not added to the AM.
Thanks,
Nigel.

John, as usually, is right with the pointer to the documentation he pasted. Just to make sure you read it carefully, let me hoghlight an important point here:
"If the option is selected, then the composed entities do not perform the DELETE statement *on the assumption that the database ON DELETE CASCADE constraint will handle the deletion of the corresponding rows*."
So make sure the database is setup for cascade delete as otherwise you still will not succeed
Frank

How to Edit Word and Excel file in N9

Hi, I can open the Ms Word and Ms Excel Files in N9 but I can not edit the text or Cells. Please advise the way to edit the text in the Word or Excel Files.

Apparently, Nokia considers it to be strange that someone want to edit documents on smartphone, and considering that most of the developers (who are able to produce office software) are not interested in MeeGo, we will not have this option available.

COMPUTE function: How to get subtotals and GRAND total together?

I am wrtiting a report using SQL and SQL*Plus to get subtotals and a grand total. The COMPUTE function allows me to COMPUTE SUM on a group, but it only gives me subtotals. I'm interested in getting a report with the SUBTOTALS and a final GRAND TOTAL. Can this be done using SQL*Plus?
Here is my current code that gives me subtotals:
COMPUTE SUM LABEL subtotal OF sal ON deptno
SELECT ename, sal, deptno
FROM emp
ORDER BY deptno;
ENAME             SAL     DEPTNO
CLARK            2450         10
VOLLMAN          5000
MILLER           1300
                 8750 subtotal
SMITH             800         20
ADAMS            1100
FORD             3000
SCOTT            3000
JONES            2975
                10875 subtotal
ALLEN            1600         30
BLAKE            2850
MARTIN           1250
JAMES             950
TURNER           1500
WARD             1250
                 9400 subtotalHere is the code to give one grand total:
Column DUMMY NOPRINT
COMPUTE SUM OF sal ON DUMMY
BREAK ON DUMMY
SELECT NULL DUMMY, ename, sal, deptno
FROM emp
ORDER BY deptno;
ENAME             SAL     DEPTNO
CLARK            2450              10
VOLLMAN          5000          10
MILLER           1300          10
SMITH             800              20
ADAMS            1100          20
FORD             3000          20
SCOTT            3000          20
JONES            2975          20
ALLEN            1600              30
BLAKE            2850          30
MARTIN           1250          30
JAMES             950          30
TURNER           1500          30
WARD             1250          30
                29025
How can I combine both on one report?

Massimo Ruocchio wrote:
Do you like this?I believe OP is looking for both department totals and grand total. Frank already showed how to do it in SQL*Plus. To do it in SQL:
SELECT CASE GROUPING_ID(real_deptno,real_ename)
          WHEN 0 then real_ename
          WHEN 1 then 'Department ' || real_deptno || ' total'
          ELSE 'All department total'
        END ename,
        SUM(sal),
        deptno
FROM (
         SELECT deptno real_deptno,
                 ename real_ename,
                 sal,
                 CASE ROW_NUMBER() OVER(PARTITION BY deptno order by ename) WHEN 1 THEN deptno end deptno
           FROM emp
GROUP BY GROUPING SETS((),real_deptno,(real_deptno,deptno,real_ename))
ORDER BY real_deptno nulls last,
           real_ename nulls last
ENAME                  SUM(SAL)     DEPTNO
CLARK                      2450         10
KING                       5000
MILLER                     1300
Department 10 total        8750
ADAMS                      1100         20
FORD                       3000
JONES                      2975
SCOTT                      3000
SMITH                       800
Department 20 total       10875
ALLEN                      1600         30
ENAME                  SUM(SAL)     DEPTNO
BLAKE                      2850
JAMES                       950
MARTIN                     1250
TURNER                     1500
WARD                       1250
Department 30 total        9400
All department total      29025
18 rows selected.
SQL> SY.

How to edit books and pdf in ibooks for mac ?

trying to edit the metadata for books and pdfs in the iBooks for mac app and it doesnt seem possible.. the "get info" window is non existant to make changes..
anyone with any suggestions or methods to edit ? or is this something the engineers left out

for a longer, more complete discussion about this, please check this discussion:
https://discussions.apple.com/thread/5468680?tstart=0
I have forwarded an enhancement request to add this feature in iBooks for Mac. The more providing this feedback, the higher this might get on the priority to solve. Please fill in your remarks and suggestion via http://www.apple.com/feedback/ibooks.html

How to edit HDV and HD 24F together?

Similar Messages

Maybe you are looking for