How to edit images on local drive and then archive to external?

I have a Drobo that I use to archive my permanent lightroom archive and image files. Currently, everything lightroom resides on this external drive. But the Drobo is no where near as fast as my internal hard drive as far as read/write and seek speed. I was wondering if there is a fairly easy way for me to work with my most recent import of images off of my internal hard drive and then "move" the images to the drobo once my post-processing is complete. I'm thinking storing the catalog on my internal drive would make sense as well and then use lightroom's built in catalog backup feature to backup the catalog file to the external drive. Any suggestions for those of you out there using Drobos or other large external storage devices on some type of "best practice" would be great. I apologize if this has been covered elsewhere in the forum; I searched but I couldn't find anything.

bisabuelo wrote:
... I was wondering if there is a fairly easy way for me to work with my most recent import of images off of my internal hard drive and then "move" the images to the drobo once my post-processing is complete. ...
You can do exactly that, I do it all the times. Import your photos to an internal drive, work on them, and once you're done with the major work, move the photos or folder(s) from within LR to your drobo. LR will keep track of where your photos are if you move them from within LR.
I even sometimes move an image to a tomporary directory on a local drive from my NAS storage before opening it in PSE, since the building of a large TIFF takes forever on my NAS. I then move it back after finishing my work.
... I'm thinking storing the catalog on my internal drive would make sense as well and then use lightroom's built in catalog backup feature to backup the catalog file to the external drive. ...
I think that's a good way of handling it.
Please also be aware of the fact that the most important performance topics are access times to
Catalog
Previews
ACR cache (!!)
Access time to the raw file itself is actually not the most important issue.
Beat Gossweiler
Switzerland

Similar Messages

Resize image from local drive and upload to server

Hi there
I want to allow the user to chose an image from his local
hard drive.
The image should then be loaded into the Flex 2 application.
There I wanna show him infos about the image e.g. height and
width.
He should then be able to scale/resize the image and upload
it to the server.
I have no idea how to do that :-)
Any thoughts on that?
Thanks in advance
Bernd

Well in short, you need a second language to support that,
e.g. PHP/ASP/CF.
First you'll have to build a GUi in which you can upload the
jpg, putting it to the server using php/asp/cf, then you'll need to
make a call to that image, (importing it into your flex), then
you'll have to set the parameters for the resizing, then you'll
have to call a php/asp/cf script which does te resizing

How to upload images to a DB and then view them in the site?

Hi
I have a form, and i want it to insert some data on a DB, so
that the site can display that information. But i'm not able to
upload images or files, because dreamweaver does not have a file
upload option.
I'm using PHP, can anyone help me on how to upload a image
and display it on the web site?

> I don't think its possible to store files in a
> database.
It is. But it's not a great way to do things.
> store it's path in the DB
Actually, what you want to store in the DB is the filename
only. Put the
path into the HTML. That way you don't have to change every
record when you
rename a folder.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"IndioDoido" <[email protected]> wrote in
message
news:e1rdmu$819$[email protected]..
> Hi there!
>
> I don't want to upload a image to a DB...i want to
upload it to a folder
> but
> store it's path in the DB. I don't think its possible to
store files in a
> database.
> After the upload i want to display the image on the
page, with its name
> and
> discription, in other words, with the information
uploaded from the web
> form
> created with dreamweaver record insertion form.
>

How can I use wget, cron and Automator to periodically pull a dynamic image from a URL to local storage, and then update a Keynote slide with that image, automatically?

How can I use wget, cron and Automator to periodically pull an image from a URL (which is dynamically updated - like a weather map, say - to local storage, and then update a Keynote slide with that image, automatically?

Any particular reason for those specific technologies? wget does not exist on a mac, although you can nstall it I guess. OS X has curl installed which should do pretty much anything you want to do with wget. cron is being replaced by launchd, although cron still exists on mountain lion.
As far as I can tell from automator all the standard 'actions' to access keynote available to it require keynote to be open and running, but does not provide a function to actually open it. So I think you will have to write some applescript, as a minimum to open and quit keynote. I notice that the keynote actions are mostly circa 2005 an wonder if they would even work.
Under utilities in automator 'actions' there is a capability to add applescripts as part of the workflow.
Also, note that cron is being dprecated by Apple and replaced by launchd. that said cron is stil on my mountain lion instalation.
This entry at stackoverflow shows use of cron with curl to get web urls. http://stackoverflow.com/questions/1683620/getting-started-with-cronjobs-on-a-ma c
If I have any time I may try and get this to work as it is quite interesting and new to me. But otherwise, good luck.

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file ext

I recently had some 8mm film transferred to DVD. I am trying to edit the film clips using Premier Elements 4.0. so I can reburn the films on a single BluRay disc. Some of the film clips copy into the project but others don't. I tried copying the VOB filed onto my hard drive and then changing the file extensions on the VOB files to MPEG but this was no help. Some of the VOB files contain numerous film clips but my software does not appear to be able to recognize them as such. I need to know if replacing my old Premier Elements with the new Version 13 would solve this problem or not. Any advice would be greatly appreciated!
Bob

Bob
What do you have now.....
What computer operating system do you have?
We can go into the finer points of source and your intentions, but for now it would appear that you are using SD 4:3 source media to get to a HD 16:9 result. Lots to discuss in this regard.
What was given to you on the DVD disc? DVD-VIDEO 4:3 or something else?
If DVD-VIDEO on DVD disc, you should expect to find on the disc a folder named VIDEO_TS. That is your target for your video files.
If you were given a DVD-VIDEO on DVD disc, then all you want from it are the video files, specifically
VTS_01_1.VOB, VTS_01_2.VOB, and so on through that series until possibly getting to
VTS_02_1.VOB, and so on. How many files you have beyond the VTS_01_1.VOB file will depend on the size of the DVD-VIDEO.
Does the above scenario apply to you?
The alternative might be someone giving a DVD disc (data disc) which contains just the VTS files mentioned which were copied from
the VIDEO_TS Folder. So, you do not get the whole VIDEO_TS Folder, just the essential video files. Does this scenario apply to you.
I see no need to replace your Premiere Elements 4 with a later version unless you have a huge project and need a later version that will be a 64 bit application running specifically on Windows 7, 8, or 8.1 64 bit computer.
Consider...Premiere Elements 4 and if you have DVD-VIDEO on DVD....
1. Place the DVD disc in the burner tray
2. Open Premiere Elements 4 and set the project preset for NTSC DV Standard (assuming you are working in a NTSC setup)
3. Go to
Get Media
"DVD, Digital Camera, Mobile Phone, Hard Drive Camcorder, Card Reader"
"Adobe Premiere Elements - Media Downloader" and its Advanced dialog.
Set the Source in the latter dialog for the drive which has your DVD disc inserted in its tray
You should see your VTS_01_1.VOB thumbnail in the "Adobe Premiere Elements - Media Downloader" Advanced dialog.
With this VOB selected, click on Get Media to get the file from there into the project.
Should work fine.
Complications may be involved if the people who processed your footage gave you something other what is described above.
Please review and consider, and then we can plan our project strategy accordingly.
Thank you.
ATR

Set up to save directly to external Hard Drive so cannot have separate 'back up'I now want to reverse i.e save to internal Hard Drive and 'back up' on external 'hard Drive'. Please advise me how to do this.

Macbook Air 13 inch purchased October 2013. set up to save [mainly photos] to external 'hard drive' i.e. not saved to internal hard drive. Cannot find easy way to create 'back up'. Please advise how I can reverse i.e save directly to internal 'hard drive' and 'back up on external 'hard drive'

For backing up your data I recommend that you use Time machine:
http://pondini.org/OSX/Home.html
rob at the orchard wrote:
save directly to internal 'hard drive'
When you import images or create other data files, file them in the appropriate places on your internal drive, don't delete them and let Time machine back them up.
Ciao.

How to upload images on hard drive to iPad?

how to upload images on hard drive to iPad?

You can import them into iTunes then use that to get them onto your iPad.
You can download the iCloud control panel and use photo stream to get the photos onto your iPad
You can e-mail them to yourself and them save them from that e-mail
You can upload them to something like dropbox and then download them onto your pad from there.

Loading PDF from local drive and sending it to Agent Inbox

Hello experts,
I have a question regarding to sending e-mails to inbox agent (so that it will appeared in the Inbox in the transaction SBWP). Sending e-mail is not a problem and I use FM called SO_NEW_DOCUMENT_ATT_SEND_API1 to do it.
The problem starts when I want to attach a PDF file. I can not find information how to load a pdf file from a local drive and add it as an attachment to an email. I will be grateful for your help and peace of code.
Best regards
Andrew

Hi,
Using cl_bcs much simpler
Based on BCS_EXAMPLE_3 .
See attached program Y_R_EITAN_TEST_10_07 .
Regards.

I just bought a iMac G5 iSight from my school, how do I clean the hard drive and set it up as a new iMac, I just bought a iMac G5 iSight from my school, how do I clean the hard drive and set it up as a new iMac

I just bought an iMac G5 with iSight. How do I wipe the hard drive and set it up as a new iMac

Boot from your Mac OS X installer DVD. After selecting a language, choose "Disk Utility" from the menu bar.
When Disk Utility launches, use the "Zero Out Data" option under the Erase tab. Erase the entire disk, not only the free space.
One pass of zeros is secure enough for normal use. One pass will take a couple of hours, so plan some time.
Message was edited by: EZ Jim

How do i upgrade my hard drive and get it to boot in Mountain Lion?

I have a Late 2009 Macbook 6,1 and want to install a new, larger capacity hard drive. Currently I am running Mountain Lion and don't have any install disks, so the question is, what is the process to change out the drive and get the Mac to boot after the new drive is installed. Since it is a new drive it won't have a recovery partition or any operating system files. My plan is to migrate my data using my Time Machine backup, but I worry that when I try to boot after the new drive is installed, all I will be greeted with will be a flashing question mark. I'm really having a hard time finding a step-by-step set of instructions for someone attempting what I'm trying to do. I do have an external enclosure I could put the new drive into before I put it into the Mac. Would I try using something like Migration Assistant to transfer all of the files to the new drive and then just swap out drives afterward? Would the OS migrate as well, or would I still not have a bootable drive? Or is there some kind of minimal boot disk I could burn onto a CD or flash drive and then once the machine boots go with a restore from Time Machine Backup? I'm open to any ideas anyone may have on the least painful way to go about this process. Maybe use some (hopefully free) software of some sort to clone the current drive onto the new drive while it's still in the external enclosure? Any help or ideas would be greatly appreciated!

How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the external drive then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Can some please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my Mac

Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.

Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

How to use ssd as boot drive and hdd as storage on a macbook pro 13

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one . by formatting using mac software . I would like to run all programs and OS but would love to have my downloads and useless data on run on my 1tb 5400rpm hdd without me have to manual send it there..

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one
Each drive mounts as a separate volume. There is no convenient way to make them look like one contiguous volume.*
Franky, with an hdd and a ssd I would recommend you put your home dir on the hdd and leave the ssd for the OS and your key applications. It's relatively easy to do and I think better than moving only portions of your stuff.
How to Move the Home Folder in OS X – and Why
* There are ways to to make musltiple volumes appear as one large drive but I think it is beyond the scope of this discussion and not appropriate to this configuration.

How can I put my recently purchased iTunes movies on to my thumb drive and WD My Passport external hard drive. My Mac keeps saying "can't be copy because it is too large for the volumes format

How can I put my recently purchased iTunes movies onto my thumb drive and WD my passport external hard drive.My Mac is saying that can't be copied because it is too large for volumes format

[file] is too large for the volumes format
That is usually an indication that the Volume was never Erased or Partitioned for GUID partition table and Mac OS, and is still in a Windows format.
Mac OS X Extended (journaled) has no such file-size limitations

I have a late 2008 Macbook Pro last updated to Mavericks OS. The screen died and it's not worth replacing. How do I remove the hard drive and use a drive sled to access info I need?

I have a late 2008 Macbook Pro last updated to the Mavericks OS. The screen died and I took it into an Apple store and was told replacing the screen and the hardware to repair everything would cost almost as much as buying a new laptop or a cheaper model. I was told that I can use a drive sled to access data I need on my hard drive. How do I remove my hard drive and use a drive sled to get to the information I need? What makes matters more complicated is I need to update my iPhone and my iTunes/App store purchases. How can I accomplish this?
My wife has a late 2008 Macbook Pro as well, which I am assuming I need to run my hard drive. Is there a way to just access just my hard drive without interfering with hers?
I know this is lengthy. Thanks to whoever looks at this and offers advice/instruction.

the device you need is an External enclosure for a 2.5" (laptop form factor) SATA drive.
A USB-interface enclosure will be slow, but is adequate for this task and for re-purposing as a backup drive later. A firewire-interface drive would be faster, but is harder to find, more expensive, and faster than needed for this purpose.
The drive will mount as an "extra" drive on your wife's Macbook, and you can drag and drop whatever you wish. You could create a separate Account for yourself on her computer, and use Migration Assistant or just copy your stuff over to the new account. Then it would not interfere with her files.

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

I can no longer edit the info for my songs, movies and tv shows. This occurred since I loaded Windows 7 Pro on my C drive, and then fownloaded ITunes 10. Why will the program not allow me to access the track info to edit it?

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

How to edit images on local drive and then archive to external?

Similar Messages

Maybe you are looking for