HOW TO: EDIT IN PLACE ON WINDOWS CLIENT

Hi everybody,
I work in TIBA (broadcaster company), we use FCS so much and I have a problem, actually i have running edit in place on XSAN for MAC clients, but i cant work of the same way on windows.
We have XSAN and fiber channels working.
I configure the device but it doesn´t work.
Somebody, help me please. My email is [email protected]
Kind regards
Emiliano

Hi,
No iam not using stornext for the windows clients.
The mac and windows clients running on ethernet. The the mac clients have mapped the xsan volumes using AFP or SMB protocol and the edit in place works ok.
The windows clients have mapped the xsan volumes through SMB but the edit un place doesnt work, the files are cached and doesn´t run as edit in place.
Note: sorry by my english.
kind regard.
Emiliano
Are you using StorNext FX to add the Windows clients to your Xsan? If so, then all you have to do is add the Windows Edit-in-place URI to each EIP device in the Devices section of the Java client Admin GUI (not the System Preferences pane). Once you've done that, EIP will work for the Windows clients as well. Here are the instructions for entering the correct URI syntax.
If you are not using StorNext FX for your Windows clients, please give us more detail on how your system is set up.

Similar Messages

How to edit photostream captions on Windows?

Once photos are added to a shared iCloud Photostream album on a Windows machine, there does not appear to be any way to edit the captions/comments. Is this true? Any workarounds?

Hi,
No iam not using stornext for the windows clients.
The mac and windows clients running on ethernet. The the mac clients have mapped the xsan volumes using AFP or SMB protocol and the edit in place works ok.
The windows clients have mapped the xsan volumes through SMB but the edit un place doesnt work, the files are cached and doesn´t run as edit in place.
Note: sorry by my english.
kind regard.
Emiliano
Are you using StorNext FX to add the Windows clients to your Xsan? If so, then all you have to do is add the Windows Edit-in-place URI to each EIP device in the Devices section of the Java client Admin GUI (not the System Preferences pane). Once you've done that, EIP will work for the Windows clients as well. Here are the instructions for entering the correct URI syntax.
If you are not using StorNext FX for your Windows clients, please give us more detail on how your system is set up.

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

How to edit registry in windows 7 SP1 ISO image

How to edit registry keys in windows 7 SP1 ISO image?

Hi,
You might need to refer to these two articles
Edit the registry on a mounted WIM (this link is for WIM, just want to share it with you, hope it can help you)
http://blogs.technet.com/b/migreene/archive/2006/12/07/edit-the-registry-on-a-mounted-wim.aspx
Modifying the Regstry of system image
http://blog.kace.com/2012/05/23/k2000-modifying-the-registry-of-a-system-image/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Regards
Yolanda
TechNet Community Support

How do you edit the "place" in Places?

I've been working on assigning places to images in my Aperture library. I'm doing this manually.
At the top of the Map View, you see the Country, State, City and Place. I cannot figure out how to edit the Place. Aperture keeps assigning the same Place to all of my images.
For example, I have photos from Berryville, Virginia. When I add that location, it automaticallly adds Folly Beach as the Place. Same thing happens with some photos taken in New Orleans.
Moving the Pin doesn't solve the issue. I've deleted the loation and tried adding it again, but the same thing happens. I don't see anything in the Aperture user manual that addresses this.
Any help would be appreciated.

It took me some time to figure it out, too:
What I do for my older pictures without gps data is:
- select the picture in the places view
- Main menu -> Metadata -> assign Location
- in the search field (upper left corner) I enter the name of a Landmark that I am looking for
- Aperture will show the landmark on the map, marked by a pin, and a place name that I do not want
- then I move the pin to the precise spot on the map and adjust the radius to a very small value, so that not all my pictures will show up in the same location
- now in the bottom row text field the place name can be edited. I change it to the name I want and press "assign"
Hope that helps
Léonie

Default Profile for Windows clients

Anyone know how to create default profile for windows clients from the SMB server on mac os x server? Do you just copy an account to default user on a windows client?

I am having the same issue the clients can save the data to the path therefore cant read it upon logon...Grrrrr

How To edit Display ID/Monitor ID or erase Display ID/Monitor ID Windows 7

Hi !
Started a tread in the other "answers microsoft forum" bur got redirected here hence they thought that this was a developer-question...
My original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-edit-display-idmonitor-id-or-erase-display/62eeace8-358c-4d65-8609-a3df7c3ac216?rtAction=1425277245844
question:
Have a problem that appears sometimes.
Setting up workstations at work with multiple Display-Monitors, its part of my job...
The Actual ID that the monitors get from Windows is usually not a problem, most programs can adapt to the windows settings and everything is fine.
BUT some of the systems we run sends commands and stuff to based on the actual number of the display, the number that appears on the screen when clicking the "identify button" in the desktop/display-settings from control-panel.
Lets call it the HardWare-ID of the Display
the computer, or windows remember display´s EDID and stores the monitors that has been connected in a list ?
If I installed the monitors/displays in correct order everything is good and works like we want it to.
So it happens that a display brakes or switch place for some reason, or maybe a driver-upgrade resets the display-list and windows now initiates the monitors in the wrong order.
the monitor that 1 want to have HW-ID 1 now has HW-ID 2, and everything is wrong, messages and commands now end up on the wrong display.
We have 3 options.
1 - Fix the display HW-ID
2 - Re-Configure the system and all that that includes, and hope that it wont change back at the next display-switch or driver-upgrade.
3 - re-install windows and hope that the displays get the correct ID and the continue with customer applications and so on.
I have found out that this is being stored somewhere in REG-Edit, but cant find the correct place
Having talked to HP, they don't support this kind of things... it must be a windows-problem, try with a clean install..... c-mon I switched a display !!
Tried clean driver-installs from AMD and Nvidia for the graphics cards, worked one time, until I rebooted the machine, the back to square one...
Then they ponited at Microsoft.
Having talked to Microsoft Support they dont support this kind of things....
I dont have the skills, but I cant se a problem with a scrips that deletes the reg-edit EDID list after a reboot ?
then it wouldnt be so complicated, simply:
unplug all but the display that you wan to be number 1
run script
reboot
plug in display 2 and so on ?
clearification:
Hi !
The question remains.
Not sure you guys understand my problem, doesent seem so...
I have the need to sweep the computers display-memory
The Application we are using is sending the commands to to logical screen number, not primary or secondary screen.
So It is Vital that I can decide or edit the logical numbers of the displays/screens
It doesent help me at all to switch sides in controlpanel och swtich witch is primary screen for desktop.
the application still sends the commands to teh logical numbers, and we dont want to reconfigure that if we changed a display that was faulty.
So:
I Need to disconnect displays så that I only have one connected
sweep the display-memory that is on the computer so that the disconnect monitor becomes number 2 when I reconnect it, if I dont get this memory swiped windows remembers the display and gives it the old number again.
can anyone help me `?
NOT connected to any Domain.
I realy cant understand how hard it can be to swipe the hardware ID of the displays and start over without having to to a clead install of windows !!

Hi Bobbyco57,
i've deleted my iCloud's mail ID in my iPhone 4 successfully so i've mentioned steps to delete iCould mail ID as below:
1. Select Settings icon.
2. Select iColud icon.
3. Click on Delete Account.
4. Enter new Apple ID and Password.
5. Click on Agree.
Thanks and Regards,
Suresh Balakrishnan

Geotagging - how can I edit new places that I have previously created but with typos, errors etc? How do I delete a place I have set up?

Geotagging - how can I edit new places that I have previously created but with typos, errors etc? How do I delete a place I have set up? Then I could create a new, correct entry. I'm using iPhoto '09.

Is it OK to reply to my own question?? Thanks to the related posts that appeared AFTER I'd made the post above, I learnt about the 'Manage my places' item under the Windows menu. I felt a bit dumb not knowing this.
BUT it doesn't completely resolve the issue. The info shown in the EXIF (using opt-cmd-I) under Places has the place name I choose, but it is followed by a few other lines that are incorrect and do not seem to be anything to do with any data I can see under 'Manage my places'.
Can anyone explain where these other entries might come from, and how to edit them?

How To Install Only DAC Client 10.1.3.4.1 on Windows Client Machine

Hi,
I want to install ONLY the DAC 10.1.3.4.1 client on my Windows client machine.
However, when I launch the Oracle Universal Installer the install options are greyed out and I'm forced to install both the Client and Server products.
I don't want to do this.
Please suggest me how do I go about this issue.
Thanks.

In version 7.9.5.1 the instructions say to:
You must satisfy the following requirements on the machine on which you want to
install an additional DAC Client:
■ JDK 1.5 or higher must be installed. For more information, see Section 4.3.4.5,
"Download and Install the Java JDK".
■ The appropriate ODBC database connection must be created on the machine. For
more information, see Section 4.3.4.3, "Create ODBC Database Connections".
■ Download the Hibernate files from the Hibernate Web site. For more information,
see Section 4.3.4.6, "Download Hibernate Libraries".
To install an additional instance of the DAC Client on Windows
1. Copy the \OracleBI\DAC\ directory and its subfolders from the Oracle BI
Applications installation (on Windows) to the target Windows machine (for
example, to a directory called \DAC\).
2. Copy the \OracleBI\dwrep\ directory and its subfolders from the Oracle BI
Applications installation (on Windows) to the target Windows machine.
Note: Alternatively, if the target machine already has Oracle Business Intelligence
Enterprise Edition installed, you can run the Oracle BI Applications installer on the
target machine to install the DAC Client. For information about how to run the Oracle
BI Applications installer, see Section 4.4, "Running the Oracle BI Applications Installer
on Windows."
I haven't attempted this with the 7.9.6 version yet. Nor have I reviewed the documentation to see if it is mentioned as an alternative.

My window tab is showing a different domain how to edit window title

when I type http://clear-tinnitus.org my window tab is showing videogamesplus.org which is another of my sites.I cloned my video site and copied it to my tinnitus site but I don't know how to edit the windows tab to reflect the tinnitus site.It is showing the cloned site instead.
I was given these instructions but not clear how to do it:
Click on the "Properties" tab in the sidebar on the right.
2) In the box marked "Window Title" type in your desired name
3) Update your site
Mark

A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the mozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r45
# Next Generation Java Plug-in 1.6.0_19 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

How to edit multiple regions in one Piano Roll window

I edit multiple regions in one Piano Roll window at the same time. (It is very handy way of editing especially in huge orchestra projects.)
I can see midi contents of all selected regions in Piano Roll at the same time.
1) But how to choose certain one region of many selected to edit it?
2) And how to edit all at once?
Hope the questions are clear enough.
Thanks.
Dmitriy.
iMac (27-inch, Mid 2011) 2,7 GHz Intel Core i5. 16 GB 1333 MHz DDR3.
OS X 10.10.2

First of all, the Piano Roll has two mechansim, of what it is displaying.
Selected Track: This displays all the Regions that you select in the Tracks Window
One Track: Selecting one Region in the Track Area displays all the Regions of tha tTrack in the Piano Roll. If you select multiple Regions in the Tracks Window, then the last selected Regions counts.
Whatever Regions are now displayed in the Piano Roll Editor can be edited. Select the MIDI Events and apply the command.
You can also apply edits directly to the selected Regions in the Tracks Window.
I explain all those little details in my graphically enhanced manuals ("Logic Pro X - How it Works")
One thing to be clear about:
Tracks Window: Any edit is applied to the selected Regions
Piano Roll Editor: Ay edit is applied to the selected Events
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

How to download an excel file in client place

How to download an excel file in client place?
Iam using sun apps server..
i need the code urgently..anyone help me pls,..

just build a link to that file location on the server and send it back to the client
MeTitus

How to create an Area and place main windows in scripts

How to create an Area and place main windows in scripts ?

hi prasad,
jst create a page first and define page windows.
here u can specicify whether the window is main or secondary.
to adjust the window goto form painter do the adjustment.

Windows Edit in Place

Are there any guides or is there information available for setting up windows edit in place devices? I've found scattered information here and there and the setup and administration guide has only minimal information on the subject.

I still don't understand what all is needed in order to make edit in place work on a windows machines. I started SMB on our OS X server, i shared out both the proxies folder and the volume it's stored on, i mapped the proxies.bundle to the Z drive on the windows machine and setup a windows edit in place URI on the device. Still can't get edit in place to work.
Device is setup as such:
local directory: /Volumes/MacStore2
windows edit in place URI: file://localhost/Volumes/MacStore2/

HOW TO: EDIT IN PLACE ON WINDOWS CLIENT

Similar Messages

Maybe you are looking for