How to edit in proxy mode in cs6

Hi,
i am doing My first feature film edit in premiere cs6 it's red footage 2k,i am new to edit r3d files in cs6 can any one help me the best way to edit my film ( do i edit directly 2k footage or edit in proxy?)

Run the following test:
- import several R3D footages into a PrPro project;
- drop them into the timeline (I assume you know how to create a sequence, which matches your footages);
- try to play the timeline back. If you have some issues, set the Playback Resolution to 1/2 (I also assume you know how to change the Playback Resolution) and try to play the timeline back again. If you still have playback issues, set the Playback Resolution to 1/4.
Hope the above is clear enough. If you have some questions after performing the test, please, be specific and as detailed as possible.

Similar Messages

In FCPX 10.1.2 how do you edit in proxy mode...and after you are done editing in proxy mode, how do you switch back to original media? I had no problems with old version but complicated with newer version.

In old version of FCPX I could easily edit in proxy mode which i found to be a quicker way of editing...all i did was goto preferences and click on playback tab and change it from original media to proxy...and i could go right into editing, and when i was finished before i would export my project i would switch back to original media...then i would export my project. Now i'm having a hard time accomplishing this on the newer version fcpx 10.1.2. Somebody please help me....thanks in advance!!!

Click the triangle at the top right of the viewer and choose proxy or optimized/original as appropriate.

How to edit an animated GIF in CS6

I've looked all over but have yet to find a good tutorial on how to edit an existing GIF I've found on the web. What is the best way to take an existing animated GIF and add text or images on it in CS6? BTW there are lots of tutorials on how to create a gif from scratch from a video but they don't help on editing an existing GIF.

try this tutorials..
" http://www.yvelledesigneye.com/2012/05/31/cs6-photoshop-tutorials-tips-tricks/ "
" http://www.pxleyes.com/video-tutorial/photoshop/17095/Use-the-New-Timeline-in-CS6-to-Creat e-an-Animated-GIF-from-a-Video-.html "

How to edit 4, red footage using cs6 pc win7 24gb ram please

hello,
i've chosen to create this thread so i can keep track of the stuff that happens
a colleague of mine is setting up to shoot/edit a feature with a red camera (4k)
i'm looking for 2 things:
1.) samples of downloadable 4k footage so i can see what it does to my current edit rig
2.) the most optimal system to edit 4k 2hour length feature on a win 7 pc...budget is not an issue (unless you go stupidcrazy diamond encrusted cpu, etc.)
thanks in advance, j

hello, thanks for the link, getting some now (i use yahoo)
i found this one:
canon eos 1d
http://planet5d.com/1dcsample1
http://planet5d.com/1dcsample2
http://blog.planet5d.com/2013/01/come-and-get-your-canon-eos-1d-c-4k-video-samples-here-on -planet5d-can-your-machine-cope/
what about specifically 4k r3d samples?

Editing with proxy media

Does editing with proxy media files affect the video quality once its time to export project?
I shoot 1080P HD video, import both optimized and proxy media files. When its time to export the project or share to yutube the video comes out grainy and dull. I color correct during the edit process. I don't use compressor because I don't create dvd's.
This is a bit frustrating. Any comments or suggestions?

John Lyons wrote:
Even if I checked optimize and proxy video at the same time?
Do I lose the color corrections I did when I go back to optimized?
You don't lose anything. Edit in proxy mode, then before exporting go to preferences->playback and select Original/Optimized media. FCP X will keep all your edits, but will then use the high quality media so that you export your work in full glory.
If you choose this workflow, you really do not need to create optimized media.
I don't see any point in creating both proxy and optimized versions of your media. Either edit in proxy (if your mac or drive is relatively slow, or if you use multicam with several angles) - and then you don't need optimized - or edit in optimized and you don't need proxy.

While I am in a selective mode in cs6 my screen flickers black. How do i fix this?

This is extremely frustrating while I try to work. It makes my editing time so much longer. Does anyone know how to fix this?

"in a selective mode in cs6" ??? 32 bit or 64 bit standard or entended OS config
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

How to edit JVC/Panasonic/Canon .mod video in Windows Movie Maker then upload to YouTube for sharing

Quick View:
Part 1: How to import .mod video to Windows Movie Maker
Part 2: How to edit the video with Windows Movie Maker
Part 3: How to upload your video to YouTube
Know More:
1. Which Camcorders record video in .MOD type?
2. What file types are supported by Windows Movie Maker?
3. What file types are supported by YouTube?
Part 1: How to import .mod video to Windows Movie Maker
Step 1: Load files
First copy the MOD file from your video camera to your hard drive, then download, install and run MOD Converter, click the "Add Files" button to browse your computer hard disc and load the MOD/TOD video files you want to convert to the program.
Step 2: Output Setting
In the bottom of the main interface, select an output format supported by Windows Movie Maker for each video file and specify a directory on your computer to save the output files.
Step 3: Start convert
Click "Start" button on right bottom of the main interface, you are allowed to start conversion.
Step 4: Import converted video to Windows Movie Maker
Click on "File". Then click on "Import". A window will appear. In the window, navigate to the video clip you converted just now. Then double click on the file. You'll see the icon for the file in your Windows Movie Maker "Collections".
Part 2: How to edit the video with Windows Movie Maker
Step 1: Add transitions and special effects
In the Movie Tasks pane, under Edit Movie, click View video transitions.
Preview transitions by double-clicking them and watching the Preview Monitor. Once you've found a transition you like, drag it from the Video Transitions pane, under Edit Movie pane to the box between two of your clips. This inserts the transition between the two clips.
Step 2: Add titles and credits
If you want to add a title before, after, or on top of a clip, click the clip on the storyboard or timeline.
In the Movie Tasks pane, under Edit Movie, click Make titles or credits.
Step 3: Add Music
In the Movie Tasks pane in Movie Maker, under Capture Video, click Import audio or music.
In the Import File dialog box, click the name of the song you want to use in the background. Then click Import. This adds your song to your collection but does not add it to your video. Drag the song from the collection to the video clip where you want the music to start playing.
Step 4: Add narration
If you have a desktop computer, connect a microphone. Microphones are available from most electronics stores. If you have a portable computer, you can use the built-in microphone. However, you will get a better-quality recording if you connect an external microphone. In Movie Maker, click the Tools menu, and then click Narrate Timeline. On the timeline, click the clip you want to narrate. You can narrate clips one at a time, or you can narrate the entire movie all at once. If you narrate individual clips, you can rearrange them later and keep your narration synchronized. If the narration is too loud or too soft in comparison to the movie, right-click the narration on your timeline, and then click Volume.
Step 5: To save your movie to your computer
In the Movie Tasks pane, under Finish Movie, click Save to my computer.
The Save Movie Wizard appears. On the Save Movie File page, type a name for your movie. You can also choose a folder to save it in by clicking the Browse button, but My Videos (the default) is usually the best place to save your movie. Then click Next. On the Movie Setting page, click Next to accept the default setting of Best quality for playback on my computer.
Movie Maker saves your movie, which might take several minutes. On the Completing the Save Movie Wizard page, click Finish. If Play movie when I click Finish was selected (it is selected by default), the movie will automatically play in Windows Media Player. Now you can watch your videos anytime by opening your My Videos folder and double-clicking your movie.
Part 3: How to upload my video to YouTube
A video file should meet the following requirements so that it can be uploaded to YouTube site.
1. In an acceptable format: WMV, MPEG4, MOV, AVI and MPEG.
2. Video length is shorter 10 minutes.
3. File size is smaller than 1GB.
Step 1: Sign up a YouTube account or Gmail account, then click the Upload button on any YouTube web page. See the figure below:
Step 2: Type in the information of your video file, including Title, Description, Category and tags. To increase the chances that your video can be easily found, you should put as much information as possible.
Step 3: Set this video to be public or private.
Step 4: Click the "Upload a video" button. When you see the next window, click the "Browse" button to select the video file you want to upload. Then click the "Upload Video" button to upload it. After the upload is finished, you will see the completion page. See the figure below:
Step 5: Click "My Videos" and you will see the video.
Know More:
1. Which Camcorders record video in .MOD type?
MOD is the video file type used on many digital camcorders, such as the JVC Everio, the Canon FS100 and the Panasonic D-Snap SD-card camcorders. Accompanying the MOD video file, there exists MOI file that stands for the index file for MOD.
2. What file types are supported by Windows Movie Maker?
You can import files with the following file name extensions into Windows Movie Maker to use in your project:
Video files: .avi, .wmv, .mpeg, .mpg., .asf, m1v, .mp2, .mp2v, .mpe, , .mpv2, and .wm.
Audio files: .mp3, .wav, wma, .mp2, .aiff, .aif, .aifc,.asf, .au,.mpa, and .snd.
Picture files:.jpeg, .jpg, .jpe, .png, .bmp, .dib, .emf, .gif, .jfif,.tif, .tiff, and .wmf
3. What file types are supported by YouTube?
YouTube accepts a wide range of video file formats.The video files below are all accepted by YouTube. Some video formats work best and are most compatible with certain computers, software or devices. Windows Media Video (.WMV)
.3GP (cell phones)
.AVI (windows)
.MOV (mac)
.MP4 (ipod/psp)
.MPEG
.FLV (adobe flash)
.SWF (shockwave flash)v
.MKV (h.264) If you do not think your current video file format is recognized by YouTube, you may get the best uploading results from converting your file to MPEG4 video with MP3 audio.

I prefer this
iPad Manager software, with the assistance of iPad Manager, you can make iPhone ringtone, connect your PC to iPad to backup iPad files to Computer directly, import computer file or folder to iPad.
Furthermore, it's easy to convert DVD/video to iPad.
This versatile iPad Manager can help you transfer videos, songs, photos from computer to iPad and from iPad to PC in fastest speed. Have a try with this tool and manage your iPad, iPod, iPhone in a much easier way.
* Convert DVD/video to iPad
* Backup iPad files to PC
* Import computer file or folder to iPad
iPod Manager
iPod Video Converter
DVD to iPhone Converter
iPod Mate

How to edit a clip in a multicam sequence (CS6)?

I am using Premiere CS6 on Mac, I have a multicam sequence set up (2 cam).
I just want to color correct cam 2 to match cam 1 and I cannot figure it out. Everything I try applies the correction to the entire sequence.
If someone can provide exact steps to apply color correction to one clip in the sequence only (it's just brightness/contract, nothing complicated), so that it's reflected in the multicam sequence I'd be grateful. Even a link to a tutorial would be good as I cannot seem to find it online (almost everything points to CC which I don't use and is totally different than CS6).
Please help!

Ok, I finally figured it out, no thanks to Adobe's crap "Help" system, which is missing MANY steps...
1. Right-click the Multi-Camera Source Sequence in the Project tab (NOT the multicam sequence you're editing). It's the one with the green/blue lines perfectly lined up.
2. Choose Open in Timeline.
3. In the Timeline, make the edits you want to the clip you want (in this case, Brightness/Contrast on clip 2)
4. Go to Window > Multi-Camera Monitor
5. You'll see your source clips stacked in the window, and you can fine tune from here.
6. Click on the Multi-Camera Sequence you're editing in the Timeline, and the Monitor should update to reflect your changes.
You can toggle back and forth between these sequences in the timeline, adjusting as you need.
This was incredibly easy for me to document, I really fail to understand why the Help file couldn't be bothered. It's completely missing things like what the difference is between the source multicam sequence and the program multicam sequence, how to edit a clip in your multicam sequence, and how the multicam monitor works. Really pisspoor documentation, but at this point, I don't expect anything else from Adobe.

In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

The switch is in the upper right of the viewer.

I'm stuck in proxy mode, how can I get out?

I seem to be be stuck in proxy mode. Even with a new library and a new clip, it shows a 'missing proxy' label. I can't switch to 'optimized/original media'. FCPX simply doesn't do it. I already tried trashing prefs and reinstalling FCPX. please help?
Arnoud Kwant
The Netherlands

What exactly happens when you try to switch by selecting Original/Optimized as in Alchroma's image? Does it still show Proxy as selected?
You may also try Window->Revert to Original Layout.
If reinstalling, it is recommended that you use FCS Remover to make sure that all traces of the application are deleted. And then you'd need to download a fresh copy from the App Store, and also download the additional content from inside the application.
It stays on Proxy. That is the issue.
Revert to original layout didn't help.
I uninstalled using AppCleaner. I deleted all files (except the 1Gb of additional content)
(BTW thanks for Luis and Alchroma for trying to help)

How to set up proxy on Symbian S60 3rd edition?

Everybody knows how to set up the proxy settings for Nokia web browser. But does anybody know how to set up proxy for use in any applications? For example, I would like to use Google maps app. through proxy server.
Thanks in advance.

I don't have a proxy set-up to try this, so you'll have to give it a go yourself. If memory serves correctly the network connections (WiFi/Cellular) are shared and reused, if already open, by any application requesting them on the phone.
Is it possible to initiate the connection in the web browser, logging in and negotiating whatever gateway as necessary there, then with the browser still open going to the application you want to use?
I know that when I used a free point in a hotel I was at last year you had to log in to their system via a webpage with a password. I was able to do this and then use other applications on my phone like SicFTP, eBuddy!, Windows Live etc. without any issues where they all failed to work previously, when I had not logged in via the browser.
I hope this helps, I'm about to need to do this very same thing when I go travelling in a few weeks too!

Dropped Frames consider using proxy mode

The message:
Many video frames were dropped during the last playback.
The disk does not appear to be fast enough.
Consider using proxy mode
I am resonably new to FCP X so I cant tell whether this is new (after update) or if its a known problem and how to solve it. I have seen a couple of other posts that suggest its new.
iMac
Core i5
2.7GHz
8GB RAM
Snow Leopard

This is my pet checklist for questions regarding FCP X performance.
FCP X 10.0.3 runs very well on my 2009 MacPro 2 x 2.26 GHz Quad-Core Intel Xeon with 16 GB RAM and ATI Radeon HD 5870 1024 MB.
First, check that you have at least 20% free space on the Hard Drive that your System and your Media, Projects and Events are on.
Check the spec of your Mac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Check the spec of your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
If you are short of drive space, use ProRes 422 Proxy - but remember to select High Quality when you export your movie.
Hide Audio Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power. (Use the switch icon at the bottom-right of your timeline to select a format without waveforms if you don't need them at the moment, then switch back when you do).
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
The biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

HT3775 how can i convert a mod file (on vlc) to mp4 to work on quicktime

how can i convert a mod file (on vlc) to mp4 to work on quicktime
when i connected my video camera and imported the videos, they're default is to play on vlc
they are mod files
i want to edit the videos on imovie and for that the videos need to be mp4 and open in quicktime player
what do i do

iPhone supports
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
If your video is supported, drag it to iTunes and sync it to your iPhone.

Can't figure out how to edit a Draft e-mail message--simple, right? Wrong.

OK, sorry if this is too basic and belongs in the Getting Started folder, but I couldn't find the problem here or in that location.
I thought I could figure out how to edit a message in the Drafts folder. I tried; it didn't work. I looked online, found a tutorial, which showed that I was indeed trying to do the right thing the right way. So why doesn't it work????
Here's what happens.
I start an e-mail message, click Cancel, then save as a Draft. That works fine. But then...
From the Home screen, I tap Mail.
On the Mailboxes screen, I tap Drafts (there's a number on the right -- 2 -- which disagrees with the number of messages actually seen -- 1 -- at the next step; I don't know if that's an important detail or not).
I see the draft message I want to edit. I tap it.
I tap Edit. According to the tutorial, the message is supposed to open up for me to edit further. But it doesn't. Instead...
The two lines representing the message (Recipient and first few words) move a bit to the right, and the Edit button changes to Cancel.
A dull red Delete button and a blue-gray Move button show up at the bottom. But the first line of the draft message, which has (accurately) shown up under the boldface "(No Recipient)" line, stays where it is -- showing as part of an entry in the list but not as something I can edit. I don't see the complete message, and I can't edit anything, even though I think I have just entered an Edit mode.
I click those two lines, and a red checkmark appears on the left, and the dull buttons at the bottom become brighter red and brighter blue-gray.
Tapping, double-tapping, tap-and-holding... all just toggle that checkmark on and off.
THIS MUST BE REALLY SIMPLE... HOW DO I EDIT THE TEXT OF THE DRAFT MESSAGE????

Zero replies??? Wow, I guess this is a really uncommon problem.
Well, the Genius Bar fixed the problem. They confirmed that it WAS real, and they couldn't figure out how it had gotten that way. There must have been some internal list in an inconsistent state... or something.
The fix was to deactivate my MobileMe account on my iPhone -- just wipe it out. Then they re-activated it. Everything re-synched and the problem was gone.

How does ABAP client proxy determine the sender business system

When we use ABAP client proxy to send a message in XI-SOAP format to the integration engine, how does the client proxy determine what is the sender business system, i.e. how does it know what value it should insert in the sender service field in the SOAP envelop.
For example, at first, the business system X8A_105 corresponds to the technical system X8A_105, so when the client proxy sends out a message, the sender service is X8A_105. Then I delete the business system X8A_105 in the SLD, and create a new business system that is associated with the technical system X8A_105.when the client proxy sends out a message, the sender_service is still X8A_105, why?

Hi Annie,
Execute the following function module in your business system and see what name it returns..
LCR_GET_OWN_BUSINESS_SYSTEM.
You can always debug the code inside the above FM to find out how it gets the business system name...
I think the issue should be related to cache. I would also suggest you to logoff from your business system and then login again.
Regards,
Sumit
Message was edited by:
Sumit Khetawat

How to edit in proxy mode in cs6

Similar Messages

Maybe you are looking for