How to edit in Standard def with 1920x1080 24fps clips

I have Jpegs of digital images 1920 x 1080 24fps which I have used shake to make them into quicktime files in Standard definition (which I understand you can use Uncompresses 8 bit 422, I am then putting them into FCP and I want to edit them in standard def. What settings should I use for my sequence settings and video set up?

Look in your EASY SETUPS...there is one in there called UNCOMPRESSED 8-BIT...
Shane

Similar Messages

  • Uncompressed 8-bit standard def with anamorphic?

    I read somewhere about using a sequence with uncompressed 8-bit standard def with anamorphic as an option for downcoverting from hdv. I'm using fcp5 and don't see that as an option - just uncompressed 8-bit without anamorphic.
    Any solutions will be greatly appreciated.

    Easiest way to get there (I think) is to copy the NTSC (or PAL) DV preset, then change the codec to uncompressed 8-bit. The anamorphic will be set and you'll be properly at 480 lines instead of 486.
    That I think answers your question.
    But you will then be faced with a sequence which requires rendering before viewing, and after most edits. Which is a lot of work in HDV.
    Consider instead converting the media itself using Compressor. Don't let the name fool you - it can also save out as uncompressed. You can take an NTSC DV preset there as well, and edit it to be uncompressed 8-bit.

  • How to edit 1440 x 1080 with SQUARE PIXELS?

    Yes, I know it's weird. I would like to edit 1440 x 1080 with square pixels - HD with a standard aspect ratio. Unfortunately, any preset in 1440 x 1080 (HDV for example) is anamorphic and won't let me change it to square pixels. How do I create a project in 1440 x 1080 with square pixels?
    I know I can alter the aspect ratio on export, but that would squish the images, so that won't do. I need to maintain square pixels from start to finish.

    Ah, but it is not coming from a camera. I am creating it from images. In fact the main purpose of creating this video is
    so the projectionist can adjust zoom and focus to bring the projector back to optimal "standard" settings while the audience has something funny to watch. Sure, I could create it in DV 4:3 format, but my images are already sized for 1080 height (I made a similar video for adjusting the zoom/focus for widescreen, which is really 4:3 with the top and bottom offscreen since the projector doesn't do 16:9). It is an older projector before HD standards and 16:9, but is higher resolution than the typical 4:3 formats. Another reason I want to use higher resolution is because I previously made the video at 720 x 480 resolution and it looks much better in HD.
    So the question remains - how do I set custom resolution with square pixels?

  • How to edit a standard Portal page in NWDS

    I'm looking for a guide explaining how to pull a standard Portal Web Dynpro in to Netweaver Developer Studio, make changes to it, and deploy the changed copy to the Portal.
    I have experience with the Portal and with adding ABAP Web Dynpros to it, but I'm new to NWDS and Java Web Dynpros.
    I've searched online extensively but haven't  been able to find a guide explaining how to access the standard Portal Java content.

    Hope you mean to edit WebDynpro java application in NWDS. In this case, You need NWDS (on your desktop) and NWDI (to be configured on java server) to modify any standard WebDynpro java application.
    Read the below help to understand better:
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/68d64260752a78e10000000a155106/frameset.htm

  • How to enhance the standard search with custom field?

    Hi all,
    I would like to know the general optimal procedure to enhance the standard searches like Opportunity search or Lead search.
    I've gone through some of the threads here. Some suggest, to add the new field using AET and copy the IMPL class of the search and then code the custom logic. Some say, append the new field to the structure of the search object and then implement the BADI.
    I'm actually a bit confused to understand the correct procedure.
    Can someone please help me with a generic procedure to enhance the standard search with a custom field?
    Thanks in advance.

    Hi Maren,
    Once I have got the same development. I have followed the below steps, please check with this. Let me know for further inputs.
      Add new field using Append structure of type ‘XXX’ in search
      Create BADI implementation for Enhancement spot ‘ES_CRM_RF_Q1O_SEARCH’ and include filter ‘BTQOPP’
      Put your logic in BADI implementation – SEARCH method
      Add it in WebUI configuration
      Remove the operator if required
    Regards,
    Swadini Sujanaranjan

  • How to edit a PDF created with Acrobat XI Pro after signatures have been applied (like I can in 7, 8.0

    I have a major issue that I need to resolve before we can purchase Acrobat XI Pro:
    Currently, with Acrobat 8.1 Pro, after all signatories sign a document, we add an Effective Date (we add it after they sign since we don't know when the last signature will be acquired and we can't have an Effective Date that is before the date of the last signatory, otherwise, it would be effective before they signed it, which is not possible). I'm also allowed the latitude (as stated in our Documentation Control procedure) to make spelling corrections, hyperlink updates and minor formatting changes (by using the typewriter tool and also by replacing a page that is NOT the signed page if the change repaginates the document or involves modifying a hyperlink that has changed).
    In all of the previous versions of Acrobat that we've used (7 Pro, 8 Pro and 8.1 Pro) , this has been easily possible and all changes would be listed under the Signatures tab, which is exactly what we want, which is traceability.
    I'm using the trial version of Acrobat XI Pro now but am getting the message "This document is signed and can not be edited." If I bring the same PDF that was created from Word 2003 & 2013 using Acrobat XI Pro into 8.1 Pro, though, I CAN add the date, use the typewriter tool and replace non-signed pages, save it and exit without clearing or losing any signatures.
    My question is this: How can I do this in Acrobat XI Pro, as XI Pro (in the Signature pane) also lists the changes made to the document when it was edited using 8.1 Pro? (It's OK that the changes made to the PDF then mark the signatures as "invalid", as the reason why they were invalidated is also listed in the Signature pane, e.g. "Form Field Added", which is usually the applied Effective Date.)
    Thanks for any help!

    Acrobat versions prior to 9 had a bug which allowed you to do what you did. In Acrobat 9 this bug was fixed. In order to do what you want you need to certify (apply special certification digital signature with your certificate -- it is "Certify (Visible/Invisible)" choice in the "Work with Certificates") your document first. In the process of certification you can specify which modification permissions you allow the users of your document to make after signing. Certification signature must be the first signature in the document.

  • How to edit a Finder "Open With" entry

    How do I edit an "Open With" entry on the context menu in Finder? I have an application which updated recently and has added a rather long version number to the application name in the "Open With" entry for the app. I have run a command line which was given to me in these forums to update file-type associations and remove old apps from the list but the version number on this app seems to be resisting efforts to be cleaned up. I am guessing there is something in a PList somewhere but I don't know where.
    Any help would be appreciated.

    Use an encrypted disk image or a third-party method. Placing the password in the keychain will automatically unlock the image when your Mac OS X account is active.
    (53277)

  • How to edit spfile in RAC with location +DATA/

    Dear All,
    My RAC is 2 node 11gR2 on Linux.
    I need to modify my spfile since my UNDO tablespace is giving error while Oracle Starts up:
    ORA-01092: ORACLE instance terminated. Disconnection forced
    ORA-30012: undo tablespace 'UNDOTBS2' does not exist or of wrong type
    I changed UNDO TABLESPACE recently using alter system only.
    Now I want to change the UNDO TABLESPACE in spfile.
    When i go to dbs directory i can see the parameter file and its contents are: SPFILE='+DATA/racdb/spfileracdb.ora'
    I need to edit this file, how can i edit it?
    Kindly help
    Regards,
    Imran

    mrimran,
    After asking an enormous amount of doc questions you should know
    alter system scope=spfile
    alters the spfile
    You should also know how to find the documentation (searchable) at http://tahiti.oracle.com and to use it
    Your abuse of this forum with doc questions is completely unacceptable.
    I will, from now on, mark every further doc question from your handle as abuse of this forum. Every question, until moderators have removed you!!!
    Sybrand Bakker
    Senior Oracle DBA

  • How to edit video to audio with a sub-frame precision?

    As all of my other posts I must begin by stating that this is not an RTFM issue. I have read the manuals and searched the web and this forum already.
    Also I beg you to read this question first before answering some nonsense. Ok, off the soapbox now.
    I am having issue synching video to audio.
    I am editing a music video at the moment at 23.976 fps. There is a master sound track (48/16) to which all of the video must be synched.
    I have not found a way of changing the position of a video clips in the timeline relative of the master audio track with a higher than a frame precision in order to obtain a perfect lip-sync.
    I am aware of the fact that one should enable "display audio units" in the timeline in order to shift an audio track relative the video with the sub frame precision, which is very useful when doing dialogue replacement to a video. For the video I am still not able to do so. Is it at all possible? Is there a workaround?
    How do they achieve a perfect lipsync when they make professional music videos?
    Thank you!

    Actually, you can set markers on the audio clip between frames.  I rember this from Jacob Robenbergs book Premiere Pro 2.0 Studio Techniques.
    You double click on the audio clip.  It opens in the Source monitor.  Then click on the fly-out menu and select SHOW AUDIO UNITS.
    Now in the source monitor you can place a marker (to be used for syncing) anyhere within the frame.  Set a numbered marker.
    Now you have a sync marker intraframe on the Audio.  You then sync this audio marker the Frame you need. Select both clips and choose syncronize.
    So it is not sub video frame, it is sub Audio frame to the correct video frame start.
    See below.  The audio sync marker is in the middle of the frame.  Hope this helps.

  • How to edit  a site made with iWeb?

    I made a simple site with pictures with iWeb 08, I would like to edit some text and also to add more pictures, and 'easy' solution would be to add the new pictures edit the text, delete the 'old' site and upload to new one.
    www.fuentebonita.com
    Is there an easier way to make changes or add pictures to an already posted website?
    Thanks in advance

    You're in good shape then.
    From the file menu in Transmit, use the Preferences tab to customize your upload process: Preferences/Transfers
    Let us know how it works out for you...I don't think you will find a better ftp client. There's also a good list of tools for iWeb, including ftp clients, here:
    http://www.iwebtoolchest.mheaton.net/iWebToolChest/
    -Mark

  • How to edit both audio tracks with video that has two tracks?

    I have video that has 2 tracks with it. Both however are marked ch. 1 on the premiere timeline. The properties say they are 48000 hz audio. Now when i hilight both tracks and right click to edit in Audition, only one comes over. I am wondering a few things here. Why are they both the same channel and how can i edit both of them at once since they ae exactly the same in Audition? Do i even need both tracks?

    Well, that's another nasty problem with multicam editing in PP. It cuts only the video but not both. The audio track is always that of the first selected clip (of that in the first video track) when I create a multicam sequence. I have manually to open it in the timeline, enable or disable certain audio tracks, go back to the sequence and cut. But when I have to switch the audio for only some camera angles it is impossible, because I can only change the audio track for the whole sequence. Or do I miss something? Maybe it is another cool "design feature"?

  • How to edit a template gallery with not xml files?

    i bought a template and have edited too my satisfaction,
    however i am unable to add more pics to the gallery,
    i can add frames and pics in the pics/thumbs timeline, but they do not show,
    i can change the 12 pics in the original timeline without difficulty, but cannot find anyway to add more pics or thumbs.
    i have been trying to sort this for a week with no joy, i would really appreciate any help that i can get on this, any at all.
    i did post the .FLV file on the adobe server Case #0181222772 ,
    i now realise that was in the wrong place to request help with issue,
    however if you can see that, maybe you can find whatever it is i am missing???? please help before i go insane ;-).

    Thanks for that,Webqaflash however thats my problem, after searching through the files for a week many hours of frustration later i find i cannot find anyway to find or edit that restriction, it may be because i am an absolute noob, or that the template seems to be very scruffy, i picked up the template and flash and a week or two later had everything sorted except the gallery, im sure some flash expert can point me in the right direction,and that may be all i need, in the FLV file symbol 10,11,12 and 13 seem to be associated with the gallery, nothing else appears to be, but i just cant find the way to edit it. noobs what can we do but ask for help.....;-)

  • How to edit a standard  form and print progarm

    hi experts,
                  I have lot of standard scripts for my works.but it is very tough to change the print progarm according to our own forms.Is there any easy way yo change the print progarm????
    and some of the print progarms are not avilable for smarttforms .i am using ECC 6.0
    but the smartform is available .when we try to run it it is saying the fm doesnt exists.what i ahev to do?

    Hi
    In most of the cases there is no need to EDIT/Change the Std driver programs.
    We just need to copy the std forms/smartforms and need to change them and to asign the same changed forsm to the driver programs.
    see few Scripts/programs
    SALES ORDER
    Output type         : BA00
    ScriptForm Name     : RVORDER01
    Driver Program Name : RVADR01
    smartform name
    DELIVERY NOTE
    Output type         : LD00
    ScriptForm Name     : RVDELNOTE
    Driver Program Name : RVADDN01
    smartform name      : LE_SHP_DELNOTE
    Smartform Driver Pgm: RLE_DELNOTE
    INVOICE
    Output type         : RD00
    ScriptForm Name     : RVINVOICE01
    Driver Program Name : RVADIN01
    smartform name      : LB_BIL_INVOICE
    Smartform Driver Pgm: RLB_INVOICE
    PUCHASE ORDER
    Output type         : NEU
    ScriptForm Name     : MEDRUCK
    Driver Program Name : SAPMF06P
    smartform name      : /SMB40/MMPO_L
    Reward points if useful
    Regards
    Anji

  • How to Call a standard screen with in a custom function module

    Hi Guru,
    I am copying a standard function module SWU_WF_TASK_DISPATCH in to Z function module in that they where calling a standard screen.
    Some one help me how to copy or call this standard sceen within the function module.
    Regards
    Paul

    Hi,
               for that you have to create screen from SE51 same number in standard and program name should be the name of Z function group's main program and declare all varriable in function group's top inclue.
    I think copy is not possible u have manually create screen for that.
    Regards
    Gagan

  • How to edit a standard SAP Query

    I need to do authority check for satndard SAP Query....How to do it

    If you put code similar the following in the Infoset ---> Extras -> Code -> Start of Selection it should work
    CALL FUNCTION 'SD_ORGDATA_AUTHORITY_CHECK'
    EXPORTING
       I_VKORG            = P_VKORG
    *   I_VTWEG            =
    *   I_SPART            =
        I_ACTVT            = '01'
    EXCEPTIONS
       NO_AUTHORITY       = 1
       OTHERS             = 2.
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
             WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    So, if the user does not have the proper authorization, it will exit the program.  You will need to check with your Security administrator to verify what value to use for the Activity Code.

Maybe you are looking for