How to edit "learn" in mail ???

is there any way to edit or remove a word from the "learn" dept in mail?
thanks

Quote from this article Apple.
"If you accidentally add a misspelled word to the dictionary, type the misspelling in the Spelling and Grammar window and click Ignore, or Control-click the misspelling and choose Unlearn Spelling from the shortcut menu."
http://support.apple.com/kb/PH3965
Best.

Similar Messages

Can't figure out how to edit a Draft e-mail message--simple, right? Wrong.

OK, sorry if this is too basic and belongs in the Getting Started folder, but I couldn't find the problem here or in that location.
I thought I could figure out how to edit a message in the Drafts folder. I tried; it didn't work. I looked online, found a tutorial, which showed that I was indeed trying to do the right thing the right way. So why doesn't it work????
Here's what happens.
I start an e-mail message, click Cancel, then save as a Draft. That works fine. But then...
From the Home screen, I tap Mail.
On the Mailboxes screen, I tap Drafts (there's a number on the right -- 2 -- which disagrees with the number of messages actually seen -- 1 -- at the next step; I don't know if that's an important detail or not).
I see the draft message I want to edit. I tap it.
I tap Edit. According to the tutorial, the message is supposed to open up for me to edit further. But it doesn't. Instead...
The two lines representing the message (Recipient and first few words) move a bit to the right, and the Edit button changes to Cancel.
A dull red Delete button and a blue-gray Move button show up at the bottom. But the first line of the draft message, which has (accurately) shown up under the boldface "(No Recipient)" line, stays where it is -- showing as part of an entry in the list but not as something I can edit. I don't see the complete message, and I can't edit anything, even though I think I have just entered an Edit mode.
I click those two lines, and a red checkmark appears on the left, and the dull buttons at the bottom become brighter red and brighter blue-gray.
Tapping, double-tapping, tap-and-holding... all just toggle that checkmark on and off.
THIS MUST BE REALLY SIMPLE... HOW DO I EDIT THE TEXT OF THE DRAFT MESSAGE????

Zero replies??? Wow, I guess this is a really uncommon problem.
Well, the Genius Bar fixed the problem. They confirmed that it WAS real, and they couldn't figure out how it had gotten that way. There must have been some internal list in an inconsistent state... or something.
The fix was to deactivate my MobileMe account on my iPhone -- just wipe it out. Then they re-activated it. Everything re-synched and the problem was gone.

How to edit file attachments in Mavricks Mail?

Does anyone know how to edit file attachments in Mavricks Mail?
Eudora, Foxmail and many other email programs allow you to simply click file attachment, open it, edit it, and FORWARD it to others.
This is extremely difficult with Mail because it forces every single incoming file attachment to be READ-ONLY which means you are forced to re-save a copy in a folder then after editing it you need to spend time to fish it out of the folder, reattach it and then forward to others. It is a huge time wasting headache not to mention polluting your system with extra copies of files.
Thanks

I believe you are missing something. I'm not on my Mac right now but there should be a setting where to save attachments and also muiltiples at one time.

How can I edit external e-mails accounts configurations I had on Mobile Me mail and now on iCloud?

how can I edit external e-mails accounts configurations I had on Mobile Me mail and now are
on iCloud?

Thanks for the answer, but the external POP accounts I had in my MobileMe are working in my iCloud! I receive all the e-mails that are directed to those POP accounts, in my iCloud e-mail, since I migrated from Mobileme to iCloud. So, iCloud accepts external accounts, but i doesn't allow us to edit new configurations or to send e-mails using Pop Accounts through it. Very weird. Does anybody have a solution?

I am not able to send my slideshow from iphoto because I entered the wrong username (e-mail address) by accident. I cant see how to edit it. Can anyone help me?

I am not able to send my slide show from iPhoto because I entered the wrong user name (e-mail address) by accident and I dont see how to edit it. Can anyone help me out?

Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us

How to edit out multiple ipad mail addresses

How to edit out multiple ipad mail addresses

How do you mean? the yahoo app? or accessing via safari? or using the mail app?
Using the mail app there is no way to sign out of mail accounts. The presumption is that the iPad is a single user device, so no need to sign out.

I have forgotten my Mail account password on my MacBook Pro. How can I learn what it is?

I have forgotten my Mail account password on my MacBook Pro. How can I learn what it is? (It doesn't give the option of resetting my password!)
Thank you!

tarheelwill wrote:
Accidentally posted it twice; first time user!
The password it prompts for is the third password line in a box under 1) my name and 2) my me.com email address. I assume it is the password I set up back in 2009 when I bought my MacBook Pro. However, I have since fogotten it, and it doesn't give you an opportunity to "remember" it.
Thank you!
Glenn posted the method, try it.

Is there someplace I can learn how to set up e-mail?

I am not very technical, and have just got the new i-phone 3G, Is there any place where there are step by step easy instructions on how to set up e-mail? Thanks

Depending on your email provider, most of them have instructions how to setup in Apple Mail or Microsoft Outlook. The instructions/settings are the same for the iPhone.
Others, like Gmail and AOL have built-in setup guides in the iPhone.
Who is your email provider? The first step is to visit their web site and look under their support section for the appropriate email settings.

How to edit a pfd document then save using Preview?

I received a form in pdf format. I need to fill out some blanks with text and e-mail it back to the sender. I could not figure it out using Preview. Actually I tried the Adobe acrobat reader also and had zero success. Thanks
Bob

Daniel Kiechle wrote:
I know Acrobat Reader 8 won't let you save a filled-in PDF form.
Then you know wrong. I do this routinely.
No, you are wrong. I just tried it 2 minutes ago. Neither Adobe Acrobat 7 nor 8.1 will allow you to save a filled-in PDF form. You cannot preview. You cannot print to PDF. All you can do is Print.
Why do you need to print the filled-in form to a PDF file? You just save it; it's already a PDF file!
Because saving is disabled in Adobe Reader. Usually, if one is using a fill-in PDF form, it is some important document such as a tax form. It is always a good idea to keep an electronic form of such documents. The free Adobe Reader will not allow you to do this.
As I stated above, you can fill in and print with Preview, +but you cannot save.+
No, I can save a filled-in form to PDF using Preview. It is no longer editable, but I have an electronic copy of what I entered. That is impossible using Adobe Reader.
I really did not want to respond, and from now on I will not,
Good!
but if you say that you know Adobe Reader 8 won't let you save a filled-in PDF file, then you are spreading misinformation, and this is a disservice to those people who come here for answers. I save filled in PDF forms all the time; in your opinion, am I routinely doing the impossible?
Apparently, you must own the full Adobe Acrobat package. That will allow you to do all sorts of things with a PDF.
I think getting to the bottom of what works and what doesn't in a thread titled "How to edit a pdf document then save using Preview" is hardly doing a disservice. I appreciate your giving me the inclination to try a fill-in form using Preview again. I am quite pleased to learn that PDFView and Preview (in Tiger and Leopard) will allow you to enter data into a filled-in PDF form. Somehow I missed that. Often, it is a good idea to go back and re-try something even if you are sure you know the results. Sometimes things change underneath without your knowledge and sometime your knowledge expands to allow you to accomplish what had before been "impossible."
You can sigh all you want. But please, check your facts next time. And a bit more civility would be appreciated too. Sometimes people are wrong. That's life. The purpose of this discussion forum is not strictly to respond to questions without further elaboration. I am not here trying to make myself look smart. I am here because sometimes the questions posed are interesting and make me think. I often learn something new while trying to help someone else. That is exactly what happened in this thread. If such elaboration were not allowed, then the only people answering questions would be those who want people to think they are smart or are trying to sell some book. That would truly be a disservice.

How to edit a file

Ok I probably realise that I've missed something in the literature on installing arch somewhere along the way, but I've spent the last 3 hours trying to find how get past this stage to no avail.
I've managed to realise I have a dhcp connection.
For DHCP IP
For this option, you need the dhcpcd package (already available on most installations). To make use of it, edit /etc/rc.conf like this:
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
but when i type "edit /etc/rc.conf" I get a colon
I presume I'm in some kind of editor, but I can't see what I'm supposed to change and what commands to use inside the editor.
Any help gratefully received

bzzzz Arch is for competent Linux users - not knowing how to edit a file suggests that you do not fall into this category. If you wish to persevere and use Arch as a learning tool, then you need to be aware that you will be required to do most of the work yourself.
See the wiki: https://wiki.archlinux.org/index.php/FA … se_Arch.3F

Verizon Blackberry Internet Service Client (BIS)- How to create an e-mail Filter

Hello. Thank you in advance for replying to my question. I am trying to create an e-mail filter so that a contact's e-mail messages do not get delivered to my BB and instead just go straight to my regular e-mail account. I understand that you can do this function from the BIS, however when I tried to create an account I received a message that said "please use your device to access the BIS." I did just as the message told me but I did not get the same menu options from my BB as I would have gotten from doing it from the internet. The page only showed a list of my e-mails and an "edit" and "delete" choice for each one. There was no "Filter" button for me to click. I remember a while ago I able to access this page and was able to remove the BB signature (i.e.. "This message is being sent from a BB"), so I know that it was possible to access this page. I do not know why I am not able to accesses it now.
If anyone out there has Verizon and knows how to access the BIS, please let me know how. Or if you know how to create an e-mail filter function, please let me know.
Thank you,
Fred
Solved!
Go to Solution.

Hi there!
To log into your BIS account from a PC/browser (not the BB browser), go to this URL:
https://bis.na.blackberry.com/html?brand=vzw
Enter your BIS credentials and you will then be in your BIS account screen. From there, use this KB to create the filter you desire:
KB04558 Add a filter to a BlackBerry Internet Service account
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

How do I stop sharing mail with other users on my computer

How do I stop sharing mail with other users on my Macbook pro?

You may have to set up different user accounts in the computer if you wish to
continue sharing the computer among other people, and only use the Mail app.
Otherwise, if you use a webmail such as yahoo, gmail, or other, just use a browser
and login each time; then there is no saving of your email to the computer as such.
I've never used an email client software, nor had an ISP based email account. So
my numerous computers have never downloaded email into software. No loss.
But the answers do include setting up extra user accounts, not admin level, so the
other users do not mess with the operating system; a standard account or just a
guest account to use a browser to access web-based login email accounts, works.
There are third-party email client for OS X, some are free applications, others are
part of a larger browser product, such as SeaMonkey, & other Mozilla derivatives.
They provide an email segment or client aspect; unlike Firefox that's a browser.
Setup information should be within the Help viewer in the computer itself. Or by a
simple search online, including the OS X version and any email client software
your computer may have installed. Some browser software includes email client.
Also there are several ways to go in this matter. I don't see questions, only answers.
To learn how the Mail application works, if you want to import everyone's mail, then
figure how to set up user accounts in the OS X. Or use web-mail & login by browser.
Hopefully you can find the best solution for the unasked question.
Good luck & happy computing!

Can anyone help me sync calendars from my iPhone to my Mac and help me figure out how to edit or delete lists in Reminders?

Can anyone help me sync calendars from my iPhone to my Mac and help me figure out how to edit or delete lists in Reminders? I thought upgrading to Mountain Lion would work, but I'm having the same problem as before under Snow Leopard. So, here's my situation.
I'm running 10.8.2 on a Macbook Pro. I have a 3GS iPhone running 6.0.1. I can make entries on my Mac Calendar and they will show up on my iPhone, but if I make an entry on my iPhone, it never makes it to my Mac. Also, I notice that when I log in to my iCloud account on my Mac, it has a "me.com" email address as my apple i.d., but it is not my primary account i.d. and I can't figure out how to delete it. Also, my Reminders application won't allow me to delete lists I created. Contacts, on the other hand, work instantaneously regardless of where the change is initiated.

On you iPhone check Settings>Mail,Contacts,Calendars>Default Calendar (in the calendars section). Here be sure you have selected the Calendar listed under your iCloud account ID as your default. If you haven't, make this change, then enter a new event on your phone and see if it syncs properly now.
You should be able to delete you reminders list by, from the Lists view, tapping Edit at the top, then tapping next to the list you want to delete and tapping Delete.

How To edit Display ID/Monitor ID or erase Display ID/Monitor ID Windows 7

Hi !
Started a tread in the other "answers microsoft forum" bur got redirected here hence they thought that this was a developer-question...
My original Thread:
http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/how-to-edit-display-idmonitor-id-or-erase-display/62eeace8-358c-4d65-8609-a3df7c3ac216?rtAction=1425277245844
question:
Have a problem that appears sometimes.
Setting up workstations at work with multiple Display-Monitors, its part of my job...
The Actual ID that the monitors get from Windows is usually not a problem, most programs can adapt to the windows settings and everything is fine.
BUT some of the systems we run sends commands and stuff to based on the actual number of the display, the number that appears on the screen when clicking the "identify button" in the desktop/display-settings from control-panel.
Lets call it the HardWare-ID of the Display
the computer, or windows remember display´s EDID and stores the monitors that has been connected in a list ?
If I installed the monitors/displays in correct order everything is good and works like we want it to.
So it happens that a display brakes or switch place for some reason, or maybe a driver-upgrade resets the display-list and windows now initiates the monitors in the wrong order.
the monitor that 1 want to have HW-ID 1 now has HW-ID 2, and everything is wrong, messages and commands now end up on the wrong display.
We have 3 options.
1 - Fix the display HW-ID
2 - Re-Configure the system and all that that includes, and hope that it wont change back at the next display-switch or driver-upgrade.
3 - re-install windows and hope that the displays get the correct ID and the continue with customer applications and so on.
I have found out that this is being stored somewhere in REG-Edit, but cant find the correct place
Having talked to HP, they don't support this kind of things... it must be a windows-problem, try with a clean install..... c-mon I switched a display !!
Tried clean driver-installs from AMD and Nvidia for the graphics cards, worked one time, until I rebooted the machine, the back to square one...
Then they ponited at Microsoft.
Having talked to Microsoft Support they dont support this kind of things....
I dont have the skills, but I cant se a problem with a scrips that deletes the reg-edit EDID list after a reboot ?
then it wouldnt be so complicated, simply:
unplug all but the display that you wan to be number 1
run script
reboot
plug in display 2 and so on ?
clearification:
Hi !
The question remains.
Not sure you guys understand my problem, doesent seem so...
I have the need to sweep the computers display-memory
The Application we are using is sending the commands to to logical screen number, not primary or secondary screen.
So It is Vital that I can decide or edit the logical numbers of the displays/screens
It doesent help me at all to switch sides in controlpanel och swtich witch is primary screen for desktop.
the application still sends the commands to teh logical numbers, and we dont want to reconfigure that if we changed a display that was faulty.
So:
I Need to disconnect displays så that I only have one connected
sweep the display-memory that is on the computer so that the disconnect monitor becomes number 2 when I reconnect it, if I dont get this memory swiped windows remembers the display and gives it the old number again.
can anyone help me `?
NOT connected to any Domain.
I realy cant understand how hard it can be to swipe the hardware ID of the displays and start over without having to to a clead install of windows !!

Hi Bobbyco57,
i've deleted my iCloud's mail ID in my iPhone 4 successfully so i've mentioned steps to delete iCould mail ID as below:
1. Select Settings icon.
2. Select iColud icon.
3. Click on Delete Account.
4. Enter new Apple ID and Password.
5. Click on Agree.
Thanks and Regards,
Suresh Balakrishnan

How to restore AND REPLACE mail folders (don't want duplicates etc)?

Bad OS X 10.5.7 upgrade has made my machine real slow doing many things.
So I want to revert to my superduper backup: the only new data since the OS upgrade is my email (and my Aperture data, but I can just restore from my vault for that).
If I use Mailbox->Archive Mailbox... function in Mail,
and then restore my old image, how do I get my mail up to date with the info in the archive without getting duplicate messages or other problems?
In other words, after reverting to my old image, if I execute File->Import Mailboxes... to get my newest email data, what will happen? E.G. restore folder "FAMILY", but I already have a folder "FAMILY" with mostly the same content (just a few new messages in the archive). Will I be left with two copies of most messages?
ALSO: Does the Archive function keep the folder hierarchy in tact even for the inbox - where the subfolders are different accounts?
Regards, Strathglass.

strathglass wrote:
Bad OS X 10.5.7 upgrade has made my machine real slow doing many things.
So I want to revert to my superduper backup: the only new data since the OS upgrade is my email (and my Aperture data, but I can just restore from my vault for that).
If I use Mailbox->Archive Mailbox... function in Mail,
and then restore my old image, how do I get my mail up to date with the info in the archive without getting duplicate messages or other problems?
In other words, after reverting to my old image, if I execute File->Import Mailboxes...
this will import the archive into a new local mailbox in "on my mac section". it will be quite separate from your inbox. you can then copy what you need from that local mailbox back to the inbox and delete the local mailbox.
to simplify matters you can make a new local mailbox now, move recent messages there and archive only that.
to get my newest email data, what will happen? E.G. restore folder "FAMILY", but I already have a folder "FAMILY" with mostly the same content (just a few new messages in the archive). Will I be left with two copies of most messages?
ALSO: Does the Archive function keep the folder hierarchy in tact even for the inbox - where the subfolders are different accounts?
archive function only archives one mailbox at a time a so you can't talk about any folder hierarchies here.
Regards, Strathglass.
Message was edited by: V.K.
Message was edited by: V.K.

How to edit "learn" in mail ???

Similar Messages

Maybe you are looking for