How to edit movie clip in fla library?

I'm attempting to edit some fla files that have embedded
movie clips. I can't figure out how to edit the movie clip files in
the library. I tried exporting the file to SWC file but can't edit
that.
Can anyone tell me how this is done? Do I need seperate
source fla files that maybe I don't have for the movie clip files?
Thanks in advance for any suggestions.

Thanks for your reply. That's what I would normally do but I
think the original programmers of this site did every thing they
possibly could to make it difficult for a non-expert to edit. I've
edited many flash sites but this one is ridiculous.
I just can't find all the images that make up the movie clip
to edit. I've looked through every layer and double clicked on
everything. I've ran out of ideas.
If anyone wants a challenge I'd be happy to send you the .fla
file just to see what I'm talking about. You can't edit
anything.

Similar Messages

How can I move clips from one library to another? Clips are still in original drive and not in new drive.

I am using iMovie 10.0.7 on a 1-week old iMac 27" running Yosemite 10.10.2. I migrated from iMovie 9 on a 2008 iMac running Snow Leopard and updated the libraries and events, etc.
I have two external drives connected via USB. I want to move / consolidate the library and clips from one of the external drives to the new iMac's 3TB fusion drive. This is to make room on the external drive to run Time Machine backups.
Apple's instructions on managing libraries and moving/copying clips/events tell me to drag to move between libraries and to Option-drag to copy. However, simply dragging only copies. I find that if I Command-drag the events/clips, I can "move" them. But when I look outside iMovie in the Mac OS X Finder, the event folders and clip files themselves are still sitting in the original drive.
I'm very perplexed as to how to really move the clips and event structure. Should I manually copy the clips and event folder structure outside of iMovie? I worry I will mess up iMovie's internal record keeping and folder structure information.
Thanks in advance.

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.

Try this:
Select a small portion of the clip in the event (Above the timeline)
Click and hold and drag that section into the timeline, it should snap into place but if you drag it above another clip, it will not replace it but will be placed on top and the sound from the other clip will still play. Also this will allow you to use Blue/Green screen modes as well as picture in picture.
The best way is to drag it to the far right

How do I move files from Event Library to Project Library?

How do I move Files from Event Library to Project Library? I tried drop and drag, that didn't work. I am new to Apple. I have always had a windows box b4 this. If anyone can help, please do. Thanks
Alain

welcome argardner to the  boards..
you're missing the concept of iM .. you don't move 'files' from Event to Project Library.. Events is the big box of all your imported clips; now, from that box of bricks, you drag the clips into all kind of projects.. you can 're-use' the same clip again'n again in many projects.. you can use all clips of all Events in one Project.. or all clips of one Event in two projects.. or..
spend some time here:
http://www.apple.com/ilife/tutorials/#imovie
http://manuals.info.apple.com/en/iMovie08_GettingStarted.pdf
the concept of Events & Projects, Clips and Libraries is at first glance very different to 'normal' editing apps, but you'll get convenient to it within minutes..

How do I move pictures from one library to another?

How do I move pictures from one library to another?

For just a few export them out of Library A via the File ➙ Export ➙ File Export menu option with Kind = Original and import them into Library B.
However, this will not include any edits or metadata (keywords, titles, etc.) that you've added.
To get the original image, any edits and all metadata, keywords, titles, descriptions, places, etc., you'll need the paid version of iPhoto Library Manager. It can copy albums or events from one library to another and keep those items I mentioned earlier with the photos.
OT

How do I move clips from one Event to another?

How do I move clips from one Event to another?
As soon as I got the new iMovie, I started importing clips and making video's. Unfortunately, I hadn't fully understood the Events feature, so all of my clips are in a single "New Event" Event. I have now created several other Events and named them properly and would like to sort all of my clips into their proper "Event" folders. How do you do that?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How do i move photos from photo library to camera roll

how do i move photos from photo library to camera roll on ipod touch 4th generation

I also had a similar problem with "photo library" and wondered how to do about copying my photos there to my computer. I was delighted when i succeeded moving my photos from my iphone4s "Photo library" to my "camera roll".
I could do it using 3 apps: 1) fileExplorer 2) fileapp 3) dropbox
Downloading these apps on my iphone devide and then Using 1) I was able to see my albums in "photolibrary" and open it in either 2) or 3). Opening it up in 2) fileapp, will give you the option to save in "camera roll" with the top right hand corner button.
After saving it in camera roll, I will be able to easily copy them out from camera roll from DCIM folder onto your computer.
I am not a comp savvy person, and I managed.

How to edit a clip in a multicam sequence (CS6)?

I am using Premiere CS6 on Mac, I have a multicam sequence set up (2 cam).
I just want to color correct cam 2 to match cam 1 and I cannot figure it out. Everything I try applies the correction to the entire sequence.
If someone can provide exact steps to apply color correction to one clip in the sequence only (it's just brightness/contract, nothing complicated), so that it's reflected in the multicam sequence I'd be grateful. Even a link to a tutorial would be good as I cannot seem to find it online (almost everything points to CC which I don't use and is totally different than CS6).
Please help!

Ok, I finally figured it out, no thanks to Adobe's crap "Help" system, which is missing MANY steps...
1. Right-click the Multi-Camera Source Sequence in the Project tab (NOT the multicam sequence you're editing). It's the one with the green/blue lines perfectly lined up.
2. Choose Open in Timeline.
3. In the Timeline, make the edits you want to the clip you want (in this case, Brightness/Contrast on clip 2)
4. Go to Window > Multi-Camera Monitor
5. You'll see your source clips stacked in the window, and you can fine tune from here.
6. Click on the Multi-Camera Sequence you're editing in the Timeline, and the Monitor should update to reflect your changes.
You can toggle back and forth between these sequences in the timeline, adjusting as you need.
This was incredibly easy for me to document, I really fail to understand why the Help file couldn't be bothered. It's completely missing things like what the difference is between the source multicam sequence and the program multicam sequence, how to edit a clip in your multicam sequence, and how the multicam monitor works. Really pisspoor documentation, but at this point, I don't expect anything else from Adobe.

How can I move my iPhone photo library to my MacBook?

How can I move my iPhone photo library to my MacBook? My MacBook had to have a new hard drive installed and I have my wedding pictures on my iPhone library, but not anywhere else. I tried selecting them and sharing or moving them. There are 465 pictures.

Restore your backup
LN

How to edit move rename files in iTunes

how to edit move rename files in itunes

I don't like iTunes.
I don't want iTunes to keep the physical location of my files because they can be on a SD card, or an USB drive and i don't want iTunes to stop me from playing a song because it cannot find it anymore.
So i would like to use physical files just to upload to iTunes Match and then delete the link to the physical file.
If needed, iTunes Match will download the file.
The problem is just that i would like to delete all references to physical files to make iTunes Match download the file only when needed and stop using the first version i had given to it
maybe i could have a Apple Script to check if there is a physical file referenced and if so delete it to have only the Cloud version

How do i move clips from home video to roll?

how do i move clips from home video to roll?

Ahh, Ok. I actually had to go to Lynda.com to watch a training video of this highly bassackwards maneuver, but now I have it. In other words, while the intuitive thing is to make a new event to hold the clip you want and then open the old event and drag the clip into it's new event, the only way to accomplish this maneuver is to NOT create a new event, but rather, go to the clip AFTER the one you want to move, select it and then Right-Click on it and select SPLIT EVENT BEFORE SELECTED CLIP (or go to FILE>SPLIT EVENT BEFORE SELECTED CLIP). Then you wait a few seconds while the program thinks a bit (no feedback it is doing this - just a pause) and then it automatically creates a new event with the clip you wanted. Now just double-click the new event and name it something meaningful.
Thanks for your help!

How do you move and divide the Library in Aperture 3.5?

How do you move Aperture 3.5 library back to it's original location. I have a folder on my desktop in which I keep photos that i am going to convert to HDR. When I opened it today to trash some of the unwanted photos, I discovered my Aperture library there! this is a large library of over 300 G. How do I move it back to it's proper place? Should I split it? I am using referenced files. Thanks for any suggestions.

Where do you usually keep your Aperture Library? In its default location in your Pictures folder? You can drag the Aperture Library.aplibrary from the folder on the Desktop to the folder where you want to keep it. As long as the destination folder is also on your system drive, the size of the library should not matter.
Are your referenced original images also in the wrong folder? The originals should not be moved manually. Use Aperture's built-in command "Fle > Relocate Originals" to move the original image files for selected images to a different folder.
Regards
Léonie

How to control movie clips using mause scroller...?

....please look
http://www.nagaoka-id.ac.jp/gallery/gallery.html
...how to control movie clips using mause scroller...?

Hi Ldavinci, I have noticed your posts on that particular
site before. Just chiming in here... don't be afraid of Flash Help
menu. There's a wealth of information there and I've found it much
faster than waiting for a response from the forum. Then if it still
doesn't make sense, at least you have a basic idea of specifics to
ask.
If you search for mouse wheel, you'll see an example under
the Actionscript 2.0 Language Reference on this topic. That said,
here's the example:

How to resize movie clip dynamically

how to resize movie clip sccording the stage size and width

how to resize movie clip sccording the stage size and width

HT1229 How do I move photos from iphoto library to my desktop

How do I move photos from iphoto library to my desktop

This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.

How to edit movie clip in fla library?

Similar Messages

Maybe you are looking for