How to edit music album names - too long to display in Ipod

How can I edit music/audio album names. I don't really care about music but I have a lot of audio files and they all have the same name, followed by "Disk 1," "Disk 2," etc. The problem is that the "Disk 1" doesn't get displayed because there's not enough room on the Ipod display. I would think I could edit this in Itunes but don't see how to do it. I would like to1 shorten the title so the "Disk 1" can be displayed. Hope that is clear.
Thanks for any help.

You can edit album names in iTunes on your computer.
Select all of the songs in the album, Select Get Info from the File menu, edit the Album name in the Info tab of the Get Info window and select OK.
This will change the name of the album. Note that you must change the album name for all of the songs in the album or you will end up with two albums.

Similar Messages

File name too long cannot copy (cont'd)

This is a continuation of the post started September 01, 2009, with the last post on
October 17, 2011 named File name too long cannot copy
Since this is an ongoing unsolved issue, and the thread was locked, it continues here.
It is ever so easy to create a long file/path using explorer.exe as will be shown below.
What needs to be solved is, what is an easy way (no, not by listing out all the files in a directory to a text file and counting characters), perhaps using a shell extension, to find out which files in a directory and it's subdirectories will be (or were)
too long to copy, (and then perhaps even copying those over either intact or renamed)?
Maflagulator said:
I'm running the 7100 build...enjoying it except for one big thing:
While attempting to copy 402gb from my main storage volume onto a spare 500gb drive (for the purpose of changing to a new RAID array) I've come across something that I would expect a Windows 98 OS to give me.
It tells me that a file has TOO LONG of a file name, then provides with two unhelpful options: SKIP or CANCEL
I never had XP give me an issue like this at all, so what gives? And while some specific files did have long file names (such as for songs, etc.) it had 7 issues with folders stating that their name was too long, but in fact they were not since they were
titled '07-06-07' for the date that I dumped the audio files in them. However, they may have contained FILES with long file names though.
Anyone else get this same situation? Perhaps the RTM version does not do this? Can anyone verify this regarding their install of the RC or the RTM?
It made it through 400gb out of the 402gb transfer.
I'm just happy to see that it doesn't spazz out about an issue like this until it has done all the other transfers that it can do because it saves the issues it has with files until the very end. In XP it would spazz about it the moment it came across it
causing the transfer process to halt.
Since long path/file names can so easily be created on Win7, it might be useful to see a typical way this happens, which might then give clues how to work with them.
In Windows Vista, we learnt from:
File names and file name extensions: frequently asked questions that:
Windows usually limits file names to 260 characters. But the file name must actually be shorter than that, since the complete path (such as C:\Program Files\filename.txt) is included in this character count.
In Windows 7, we are told here:
File names and file name extensions: frequently asked questions that:
It depends on the length of the complete path to the file (such as C:\Program Files\filename.txt). Windows limits a single path to 260 characters. This is why you might occasionally get an error when copying a file with a very long file name to a location
that has a longer path than the file's original location.
From the Windows Dev Center - Desktop, we read about Maximum Path Length Limitation here:
Naming Files, Paths, and Namespaces
This helps us understand why a folder can be a maximum of 244 characters, from the defined 260 length of MAX_PATH as follows:
260 minus C:\ (3) minus <NUL> (1) = 256
256 minus 8.3 file name (12) = 244
We also learn there that: The Windows API has many functions that also have Unicode versions to permit an extended-length path for a maximum total path length of 32,767 characters.
And we read the claim that: The shell and the file system have different requirements. It is possible to create a path with the Windows API that the shell user interface is not be able to interpret properly.
There is also a comment below this document that reads: In a previous iteration of this document, it is mentioned that The Unicode versions of several functions permit a maximum path length of approximately 32,000 characters composed of components up to
255 characters in length. This information is now gone.
So we are in a position where the file system and Windows API can create long path/flies that the shell cannot handle.
But then we need to be able to handle it, so a little exploration might lead to a better understanding of how to do this.
For most tasks being performed on long folder/files, Windows 7 and other Windows programs balk when the Path+Filename length > 260
Let's create a long path/file.
Create a folder called A at the root of a Drive.
Create a sub-folder of A called: B
Create a sub-folder of B called: C
Make a FILE in sub-folder C called (no spaces or break, one long continuous string): 123456789A123456789B123456789C123456789D123456789E123456789F123456789G123456789H123456789I123456789J 123456789K123456789L123456789M123456789N123456789O123456789P123456789Q123456789R123456789S123456789T
123456789U123456789V123456789W123456789X123456.txt
Rename sub-folder C to the string (no spaces or break, one long continuous string) (The actual directory created will be slightly shorter than this full length): 123456789A123456789B123456789C123456789D123456789E123456789F123456789G123456789H123456789I123456789J
123456789K123456789L123456789M123456789N123456789O123456789P123456789Q123456789R123456789S123456789T 123456789U123456789V123456789W123456789X123456789Y123456789Z
Rename sub-folder B to the same full string above. (The actual directory created will be slightly shorter than this full length but 2 characters longer than the step above.)
Rename folder A to that same full original string. (Again the actual directory created will be slightly shorter than this full length but 2 characters longer than the step above.)
You now have the lovely file placed at (the breaks are just so it fits into the screen):
C:\123456789A123456789B123456789C123456789D123456789E123456789F123456789G123456789H123456789I123456789J 123456789K123456789L123456789M123456789N123456789O123456789P123456789Q123456789R123456789S123456789T 123456789U123456789V123456789W123456789X1234\ 123456789A123456789B123456789C123456789D123456789E123456789F123456789G123456789H123456789I123456789J
123456789K123456789L123456789M123456789N123456789O123456789P123456789Q123456789R123456789S123456789T 123456789U123456789V123456789W123456789X12\ 123456789A123456789B123456789C123456789D123456789E123456789F123456789G123456789H123456789I123456789J 123456789K123456789L123456789M123456789N123456789O123456789P123456789Q123456789R123456789S123456789T
123456789U123456789V123456789W123456789X\ 123456789A123456789B123456789C123456789D123456789E123456789F123456789G123456789H123456789I123456789J 123456789K123456789L123456789M123456789N123456789O123456789P123456789Q123456789R123456789S123456789T 123456789U123456789V123456789W123456789X123456.txt
You have a folder length of over 700 and a file length of over 250 for a total of over 950
However you will notice that each folder, when created, could only be a maximum of 247 charachters including the path (example C:\ , & C:\A , & C:\A\B
This only applies backwards, that is up the path. It did not matter what was further down the path.
Now, you can't easily access or rename the file, but you can rename the folders easily.
For best results, start renaming from the top of the Tree, working down the subfolders, because renaming from down up will limit you, and in fact won't work if the folder lengths are too long.
So how might knowing this help us?
Well, to copy this long_file from the C:\ drive to the D:\ drive, and keeping the path structure, this should work:
Note the name of the top folder. Rename it to something very short, say: A (Make sure C:\A does not exist)
Note the name of the 2nd folder. Rename it to something very short, say: B (Make sure C:\A\B does not exist)
Note the name of the 3rd folder. Rename it to something very short, say: C (Make sure C:\A\B\C does not exist)
Make sure D:\A does not exist - then copy the A folder on disk C: to disk D: (which gives you D:\A\B\C\long_file
Rename D:\A\B\C to D:\A\B\Original_3rd_Folder_name
Rename D:\A\B to D:\A\B\Original_2nd_Folder_name
Rename D:\A to D:\Original_top_Folder_name
Rename C:\A\B\C back to their original names, in this same reverse order starting with C, then B, then A
Note: If using Explorer, at some points you might have to press the F5 refresh key.
This is of course how you might copy such long path/files without using the other more "easy" techniques for the "normal" everyday user like:
sharing a sub-folder
using the commandline to assign a drive letter by means of SUBST
using AddConnectionunder VB to assign a drive letter to a path
using the "\\?\" prefix to a path string to tell the Windows APIs to disable all string parsing and to send the string that follows it straight to the file system
and so on.
See how simple Windows can be for Dummies!
But then, how can we know that files to be copied exceed this MAX_PATH? Or also after a copy has taken place, know exactly which files that have NOT been copied because of exceeding the MAX_PATH limit, and then a procedure to copy these either by renaming
them, or by copying them intact as they are?
There have been suggestions to use
LongPathTool, but this does not have a facility to check a series of folders and tell you which files are going to be caught by the error when copying. So once a copy has taken place using Windows 7, one does not know which files did not get copied, and
where exactly they are located.
Neither does the free
Old Path Scanner do that. It can only check for overly long directory paths, but misses out when the directory path is within limits, but adding in the file name puts it out of bounds.
So, as shown above, it is ever so easy to create a long file/path using explorer.exe
So, what then is an easy way (no, not by listing out all the files in a directory to a text file and counting characters), perhaps using a shell extension, to find out which files in a directory and it's subdirectories will be (or were) too long to copy,
(and then perhaps even copying those over either intact or renamed)?

This is a not a "solution" ....but a "work around": a low tech fix....for error message "your file name is too long to be copied, deleted, renamed, moved" :
1.   problem is this: the "file name" has a limit on number of characters.....the sum of characters really includes the entire path name; you gotta shorten it first (i.e, if the total number of characters in the file name + Path name are over the
limit, the error appears). The deeper your file folder sub levels are, the more this problem will come up, especially when you copy to a subfolder of a subfolder/subfolder of another path ...adds to character limit)
2. How do you know which combined file names + path names are too long if you are in the middle of a copy operation and this error pops up? Some files copied but the "long files error message" says "skip" or "cancel" ... but not which
files are the "too long" ones. If you hit "skip" or "cancel" the "too long" files are left behind...but are mixed in with non-offender "good" "short name" files.   Sorting thru 1000s of "good" files to find a few "bad" ones manually is impractical.
3.   Here's how you sort out the "bad" from the "good":
4.    Let's say you want to copy a folder ..."Football" ...that has five layers of subfolders; each subfolder contains numerous files:
C:/1 Football / 2 teams/ 3 players/ 4 stats/ 5 injuriessidelineplayerstoolong
       There are five levels root "1 football" with subfolders 2, 3, 4 and lastly "5 injuries"
5.    Use "cut" and "paste" (for example to backup all five levels to a new backup folder):
       select "1 football" ....cut....select target folder....paste
       ("cut" command means as the files are copied to the target destination, the file is deleted from the source location)
      Hint: avoid "cut" and "paste" to a target folder that is itself a sub/sub/sub folder ...that compounds the "characters over the limit" problem ...because the characters in the sub/sub/sub folder are included in the "file name
character limit"...instead "paste" to a C:/ root directory.
       Suppose in the middle of this operation...error pops up: "5 files have file names that are too long" Skip or cancel?
       select "skip" ...and let operation finish
6.    Now go back and look at the source location: since the software allows only the "good" "short name" files to be copied (and because you "skipped" the "bad" "Long name" files so they are not copied or deleted) ...all that remains
in the source location are the "bad" "long name files" (because "good" ones were deleted from the source location after the "cut" operation...the bad ones stick out like a sore thumb.
7.   You will find ....all that remains in source folders are: the "bad" "too long" files; in this example the "bad" file is in level 5:
      C:/ 1 football / 2 teams /3 players /4 stats /5 injuriessidelineplayerstoolong
8.   select folder 5 injuriessidelineplayerstoolong (that's right...select folder, not file) gotta rename the folder first.
9. hit F2 rename folder..folder name highlighted...delete some of the letters in the folder name:
       like this:   5 injuriessidelineplayers ....you should delete 'toolong'....from the folder name
10. then go into folder 5....and do the same operation ...with the too long file name:
        hit F2 rename file....file name hightlighted...delete some of the letters
           like this: injuriessidelineplayers.....you should delete 'toolong' from the file name
11. Now..."cut and paste" the renamed file to the target backup folder.
The Error message will pop up again if you missed any "bad" files....for example, it will indicate "5 files too long" ....then repeat process 5 times until you fix all of them
12.    Finally, copy the target destination files back to the source location (when you are certain all source location file folder locations are empty)
Of course, this "makeshift" solution would not be necessary if MSFT would fix the problem...

Error in Project Coding Mask "Edit screen is "1" too long" Message no. CJ62

Hi Friend's
In sandbox already i have Define Special Characters for Projects is as "2" (Length of key for coding)
Now when i go for defining Project Coding Mask by making following new entry in the spro
example "PR .0000000000.00.00.00.00 Dairy Process Project
after entering above details system gives following error
Edit screen is "1" too long
Message no. CJ627
How i can resolve this issue.
Thanks & Regards,
Sandeep

Your coding mask is exceeding the limit of 24 characters(including special characters). Reduce some characters to make it 24 or less then 24.
Edited by: Kuldeep Bidalia on Sep 9, 2010 4:42 PM
Edited by: Kuldeep Bidalia on Sep 9, 2010 4:43 PM

"Maximum number of application files exceeded or file names too long"...help!!!

Hi there…
I am trying to create a game for my mobile.
The “problem” is that I have more than 500 swfs that I want to pack using the Adobe Mobile Packager. And I am getting this error:
“Maximum number of application files exceeded or file names too long”
How could I solve this problem?
Thanks everyone!
Cheers.
Leo.

500?? What are there so many files?
The problem is that the CAB format only allows for 300 files maximum, so there's nothing that we can do about that I'm afraid.
Mark
www.flashmobileblog.com

File communication channel issue : object name too long

Hi Experts,
My requirement is to place the successful files in folder and un-successful files in one folder after processing.
we used parameterized mapping to achieve this requirement.
I'm facing below issues, please help me to resolve.
" An error occurred while connecting to the FTP server. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Unexpected reply codeSpecified object name too long, limit is 10 characters: $Filepath_Su.'. For details, contact your FTP server vendor.
As per my understanding it is not taking the path specified,because of length issue.
Please send me your valuable inputs and help me.
Thanks in advance for your help.
Regards
Bhargava Krishna

Hello,
By loking ur error description, it's quite evident that it's a FTP sever issue?
Sometime on FTP server, there is a check which is enabled to limit the length of file names, and i think the same has been recently implemented on ur FTP server. So instead of changing ur config, check with ur FTP admin.
Tested the same after tweaking existing FTP server settings.
Thanks
Amit Srivastava

How do I add Album name to the Album field in Home Videos?

With the new iTunes, I cannot figure out how to add the album name to the Album field. Any suggestions?

New problem, New computer, I can't download iTunes with IE 11. It thanks me for downloading, but it's not on my computer nor do I get a run save pop up? Any suggestions.
You're up late for the UK.

How to edit the job name in SM37

Hi All,
I have job in SM37 with the mane ZBI_PROCESSING and the Job in Release status. Now I want to change the Job Name to Z_PROCESSING_SS. Please let me know how to edit the Job Name.
Regards,
Ravi

Hi Ravi,
In SM37 when you have the list of all jobs, right-clic on the job you want to rename, copy, enter the new name.
Then you can delete the first job. The copied one will then be executed.
Regards,
Fred

How to delete music albums from iPhone

How to delete music albums from iphone?

They're DEFINITELY pushing Apple users that way. I just saw yet ANOTHER new/incredible feature the Galaxay can do that Apple (I mean Tim Cook) can't even DREAM about doing.
At this point, it's becoming an embarrassement to even own an iPhone. *sigh*

Disk Utility (10.5.6) error: File name too long

Hello, here is one for you all...
I am in the midst of creating a new "build image" so I can start deploying Leopard.
Before I upgraded the build to 10.5.6 I was able to create a disk image of this build machine.
After updating it to 10.5.6 and all of the current Apple updates I am no long able to create a disk image.
I keep getting an error several minutes into the imaging process that says +"*File name too long".*+
I've run permission repair on the disk and Disk Warrior with still no luck. I've also used different machines and a boot FireWire drive to make he image and still have had no luck. I can use CCC to clone my Master build to another machine but I need to be able to make an image of it.
Thanks in advance for any help.

Bear in mind that in Unix, a file name includes the path, so if you have a very deep file or perhaps some kind of infinite recursive link, that might cause the problem, since that would make the file name very long indeed.
This may not be the problem you are having, but it just came to my mind when I read your post

JAXB: Error compiling classes generated by xjc (file name too long)

Hi friends,
I am trying to compile classes that are generated by using XJC tool on xsd file. The compilation fails with following message.
buildxsdmodel:
    [javac] Compiling 794 source files to /home/uchamad/working/teleworker/ejb/build/classes
    [javac] /home/uchamad/working/teleworker/ejb/build/tmpsrc/uk/co/novatel/teleworker/model/wlr/bulksearch
results/impl/ApplicationInformationTypeImpl.java:58372: error while writing
uk.co.novatel.teleworker.model.wlr.bulksearchresults.impl.ApplicationInformationTypeImpl.XMLRequestID
TypeImpl.SearchOrderResultsTypeImpl.SearchTypeDetailTypeImpl.OrderTypeImpl.OrderDetailsTypeImpl.
OrderLinesTypeImpl.NumberPortingTypeImpl.OLODetailsTypeImpl.NumberLocationTypeImpl.OLOMainP
STN1AddressTypeImpl.Unmarshaller: /home/uchamad/working/teleworker/ejb/build/classes/uk/co/novatel
/teleworker/model/wlr/bulksearchresults/impl/ApplicationInformationTypeImpl$XMLRequestIDTypeImpl$S
earchOrderResultsTypeImpl$SearchTypeDetailTypeImpl$OrderTypeImpl$OrderDetailsTypeImpl$OrderLin
esTypeImpl$NumberPortingTypeImpl$OLODetailsTypeImpl$NumberLocationTypeImpl$OLOMainPSTN1A
ddressTypeImpl$Unmarshaller.class (File name too long)
    [javac]                                             public class Unmarshaller
    [javac]                                                    ^
    [javac] 1 error
The compiler is complaining about the file name being too long. This is happening because the java classes when generated from XSD contains deep nesting of inner classes. So when it comes to compile the .class name file is too long for the operating system.
I am trying this on unix box.
I wonder if there is a way to configure XJC so that it does not produce inner classes but instead keep them out.
Any help would be appreciated.
many thanks
Usmangani

Flattening your schema definition will flatten the output files, too -- that will probably be nice for coding as well since you wont have to use class names such as SomeTypeNestedInAnotherTypeThatHasYetAnotherType. Instead of having all of the elements defined directly within the enclosing root element, define logical chunks at the top level and incorporate them in the definition of real root element of your documents by reference.

Consolidating Library Error: File Name Too Long, But What File?

I am trying to consolidate my library to put all my music (very unorganized) in one spot so I can back it all up. When I try to consolidate, it takes a second to prepare, then immediately brings up an error window saying "Copying Music Failed. The file name was invalid or too long."
How do I fix this? I really would like to back up my music!

Hi, ZeroGravity107.
This can be a tricky problem to figure out since iTunes doesn't specify what file name is "invalid or too long" and there's no documentation on what determines if a file name is "invalid or too long".
We had one user report that he was able to use his/her keen eyesight to note the last file that appeared before the error message appeared and it turned out that file was the cause of his/her trouble.
If your eyesight isn't that keen, I'd suggest concentrating on the file name being too long possibility.
The entire directory path leading to the file is considered part of the file name so, as an example, iTunes' default settings might place a particular file at C:\Documents and Settings\ user name \My Documents\My Music\iTunes\iTunes Music\artist folder\album folder\whatever.m4a.
Is the directory path leading to your consolidated location much longer than that?
polydorus has suggested a way to look over your file names: Assuming your music is currently in the default location, make your way there with Windows Explorer and select List in the View menu menu and see if anything stands out as being unusual.

Jdbc:oracle:thin:@ service name too long

I am going to use jdbc:oracle:thin:@ as my connection.
but my service name is too long....
is that any ways to include the long service name?
Thanks!

user652882,
Pardon me for asking, but how do you know your service name is too long?
Good Luck,
Avi.

XML Tag Name too long, won't run from a procedure

I have a select statement that creates an xml file using the xmlelement syntax. When I run the select statement on its own it runs fine and the xml file is generated with no errors. I'm building a procedure that does a bunch of stuff, with the end product being the generated xml file. Everything in the procedure works great, until I add the xmlelement select statement. When I try to compile it I get an error message that one of the identifiers is too long (it is 40 characters). Is there something special I need to do to get this to run within a procedure with the given tag names? I can't change the names as they are set by another department.
Thanks.

Sorry about that, Mondays are painful...
I'm not sure if you want the whole procedure, it is quite long, but here is the xml part. I am using TOAD, and when I right click and Compile I receive this error: PLS-00114: identifier 'PostalCodeOfPatientsCurrentResidenceKnownFlag FROM Admissions' too long
The part that confuses me is why does it run fine when I run it on it's own, I get the expected XML file, but when I try to run it from a procedure it fails.
SELECT sys_xmlgen(XMLELEMENT("MHR", XMLELEMENT("Control",      XMLELEMENT("DeliverySiteInstitutionNumber",a.institution_number),
                                                       XMLELEMENT("CreationTimestamp",sysdate),
                                                                           XMLELEMENT("DSSVersion",'NotSure'),
                                                                           XMLELEMENT("ResubmissionFlag",'1'),
                                                                           XMLELEMENT("SubmissionYear",a.REPORT_YR_AND_MNTH),
                                                                           XMLELEMENT("SubmissionPeriod",a.SUBMISSION_PERIOD)),
     XMLELEMENT("Stakeholders",XMLELEMENT("Stakeholder", XMLELEMENT("SubmissionType",'A'),
                                                                                                              XMLELEMENT("ULI", a.ULI),
                                                                                          XMLELEMENT("Gender",'Male/Female/Unknown'),
                                                                 XMLELEMENT("BirthDate", XMLATTRIBUTES(a.BIRTH_DATE_TYPE,a.BIRTH_DATE)),
                                                                                                              XMLELEMENT("ResidenceInformation",XMLELEMENT("ProvinceOfPatientsResidence",a.PROVINCE_OF_RESIDENCE),
                                                                                                                                  XMLELEMENT("PostalCodeOfPatientsCurrentResidenceKnownFlag",a.POSTALCODE_KNOWN_FLAG),
                                                                                                                                                      XMLELEMENT("PostalCodeOfPatientsCurrentResidence",a.POSTALCODE))
                    )).getClobVal() AS "result"
FROM Admissions a
Edited by: user11293056 on Jun 22, 2009 12:54 PM

Can't access files with names too long

I have some files on a Windows formatted external hard drive that have filenames that seem to be too long for OS X to handle. I can't open them, nor can I delete them. I can't even seem to "rm" them from the command line. I know they're there, and not just some bitwise mirage. Does anyone have any way to deal with these files (they're 0 bytes long, as far as the Finder is concerned, and if you click on them, they disappear)?

MacOS X supports file names of 256 characters (or is it 255?). Are your files names longer then that? If not, then I would suspect the problem is somewhere else, probably permissions.
When you try to rm the file, does it produce an error? If so, what is it?

Column Name too long

While loading the data from XML source I am getting following error
ORA-00972: identifier is too long
I understand that some of the Column name are more then 30 char (Oracle Limit) inmy source but I like to know what needs
to be modified in the IKM to pick only first thirty characters of column name in case of column name is more then 30 Char.
The LKM works fine as it take only the first 30 char to create the table name, I think it take that setting from topology manger.
but what need to modify in IKM to take only first 30 char for column name.
I am creating target table on the fly and I dont wanna modify each column name in the target table, It'll be alot of work for me.
Please let me know your thoughts on this.
Thanks

Yes its erroring out for IKM step for creating target table.
The step is ignoring the error on Create Target Table because of following error
972 : 42000 : java.sql.SQLException: ORA-00972: identifier is too long
java.sql.SQLException: ORA-00972: identifier is too long
ofcourse the column name is longer then Oracle limitation that is 30 Chars.
In the next step for inserting data it is also failing because of same error.
LKM steps work fine as it strip the column name longer then 30 char.

How to edit music album names - too long to display in Ipod

Similar Messages

Maybe you are looking for