How to edit 'native' start-up applications.

Hi,
I have installed Cisco Clean Acess Agent, and can't uninstall it.
It appears on the top menu, and I can quit it. However, I can't find
a place where the application is. It is not anywhere in preferences or
applications folder. Spotlight doesn't find any appropriate
matches for 'clean', 'access' or 'cisco'.
I tried holding control and moving it, just to get rid of it from the
menu bar, however, nothing happens (contrary to other, more native menu
elements).
So I have two questions:
1. How do I find this application? Where can it be?
2. How do I remove it from the 'autostart'?
It's not in the login preferences, because it integrates more tightly into OS.
Thanks!

Well... I downloaded it from the Wellesley College local network (which forces all visitors to use it). I can't get to this webpage until I actually go to Wellesley.
However, thanks for idea! Cisco indeed has some uninstall suggestions.
http://www.cisco.com/en/US/docs/security/nac/appliance/configurationguide/413/cam/magntd.html#wp1276391

Similar Messages

  • How to edit the starting time for clips in properties?

    Hello there ,
    I’m testing the CS5 Audition right now and find it great except for one thing:
    In the properties for each clip there is a starting time. But it just can’t be edited!
    I can change the starting time of the whole session – yes.
    But not the ones of the individual clips. Only by moving them around and that is not very precise.
    Is there a way to edit this starting times for the clips by typing in numbers?
    Thank you :).

    AAUser777 wrote:
    But wasn't that easier before?
    Do I have to save any time I make a change?
    As far as I'm aware, you've always had to save changes to metadata to make them permanent!
    One more please:
    Can't I group Clips and move them together anymore?
    One more thing please:
    Many people say that CS5 is worse than 3.
    Why are all those people bothered?
    No you can't group clips in CS5.5. And the reason that a lot of people are bothered is - because you can't group clips in CS5.5.
    There are a few other reasons cited too, but I think that the lack of clip grouping may be at the top of the list, judging from the number of comments about it. If you look around the forum you will find a lot of discussion about this.

  • How to edit a webdynpro JAVA application of ESS portal

    Hi,
    I have to work on a webdynpor JAVA app configurged in ESS portal,the app shows the salary slip of the employees,but don't have logo in it,so i am suppose to put logo there,but not able to understand how to start work on it.
    i have fair idea of Webdynpro ABAP,but not able to undertand what to do in this case,also have to show few more text fields on its smartform/adobe form too,not even sure,the form which is generating in salry slip is based on smartfoms/adobe forms.
    pls advice...
    regds
    vipin

    Dear Vipin,
    What I will suggest you is to first find out the component  name,
    then from the component  find out the Model (RFC) which is used, I believe that HR forms or SAP Script is used to display the
    PDF, and if this is the case then it should be changed by your ABAPer.
    You can find the component name from the Iview Property "Application Namespace" (I hope you can find the iview),
    Now go to  Content Administration>>Web Dynpro >>Deployed Content. Here you can find your Model, Now you can go to R3. Type T-CODE se37, here type the name of your model,now you can see whether its a SMART FORM, HR FORM, SAP SCRIPT or ADOBE FORM(SPF).  In case its none, then definately It would be a interactive form UI in your webdynpro Application.
    Now when you have got the name of the Component, you can make your changes.
    Hope it helps.
    Warm Regards
    Upendra Agrawal

  • How to edit flat file in application server

    Hi all,
    I have requirment of flat file load. User will update flat file and I need to upload data in cube. I am done with loading data from application server flat file to cube Now I want to know where this file will be stored so user can update the data .
    Do i need to store it some where in application sever only ? I checked my current file data but it's not in editable form.
    Please let me know your expert suggestion.
    Thanks.
    P.S. - Point will be provided as required.

    Neither user or you can not upload or edit the CSV files directly from the AL11(Application level directories).
    Using this Functional Module: ARCHIVFILE_CLIENT_TO_SERVER you can upload the file from your machine to AL11
    Note: you must have an authorization to execute this FM in PRD! otherwise you can follow the below procedure.
    (Or)
    As you data flow is from a flat file, you can ask your basis team to run a FTP program, so that when ever user give a new file every day, using the FTP program the latest file will upload into the AL11 directories. you can execute data using the Info package as usual  from AL11.
    Edited by: YJV on May 23, 2011 12:10 PM

  • Where is the cron for root and how to edit at start-up?

    I was using Cronnix (as I am not very familiar with cron, unix etc). to create a root system task to reboot my server every night.
    As I hit safe I noted I made a mistake and have it run every minute. so I do to get in any more.
    So there are two solutions I can see. One is to remove the file that holds the information. in order to this I need to know where it is and I do not.
    or to get in over command S at startup and change it there.
    Or?
    FYI I can get to the computer in T mode via an other one.
    as you might imagine any help is more than welcome.

    I'd go for the single-user mode startup and edit the crontab from there.
    Hold Cmd-S during power up. Once the system finishes booting follow the instructions on screen to mount the root filesystem, then log in as root and run:
    crontab -e
    use the arrow keys to move to the offending cron entry then type:
    dd
    <esc>
    qw!
    The 'dd' deletes the current line. <esc> (the Escape key) switches to command mode and 'qw!' tells vi to quit and save the file.
    From there you should be able to exit to resume normal startup.

  • [AIR + AS3] How to restart native desktop AIR application?

    Hello,
    I develop AS3+Air application on desktop. I have problem with restart feature. Is it possible to do it without making externall app which only load a main swf file?
    I found only one code solution.
        var mgr:ProductManager = new ProductManager("airappinstaller");
                                  SmartLogManager.info(NativeApplication.nativeApplication.applicationID);
                                  SmartLogManager.info(NativeApplication.nativeApplication.publisherID);
                      mgr.launch(NativeApplication.nativeApplication.applicationID + " " + NativeApplication.nativeApplication.publisherID);
                                  NativeApplication.nativeApplication.exit();
    but this only close app, no restart.

    document.location.href='';//resets the program
    It seems to be the only quick solution to restart the program.
    It comes with one major downside though.... It can cause memory leaks each time you call that function.

  • How to start a application with a login window?

    hi there
    does anyone have any idea on how to start an application with a login window? a login window is the first frame or window to be displayed when an application starts running. and only correct login id and password have been entered the real application will start. any sample out there? thank you.

    You can start a new thread by making a thread object and passing it an implementation of a runnable object. Runnable has just one method, public void run(), this is was gets executed in a second thread. perhaps the code you would use would look something like this.
    <code>
    // set up thread for login window
    new Thread(new Runnable() {
    public void run() {
    // construct your login window here
    // when you are done processing the
    // password....
    if(goodPassword) {
    authorized = true; // a global variable
    notifyAll(); // don't forget this
    else {
    System.exit(42);
    }).start();
    // control does not stop this code gets executed while
    // the above thread is running.
    // Set up main program here. This is done in the
    // backround.
    while(!authorized) {
    synchronized(this)
    { wait(50); }
    // now when the user logs in this frame pops
    // up real quick.
    myFrame.setVisible(true);
    </code>
    Hope you can figure it out.. good luck :)

  • How can I run a java-application on starting of Windows 2000

    How can I run a java-application without any user on starting of Windows 2000?
    For example, if the computer is restarted and nobody enter into it yet, my java-application should run anyway.
    How can I do that?

    Hi, you have to put it in a Windows service.
    To do this you have a program, Srvany.exe that allow to insert a .exe or .bat program in a Windows service.
    For example, i develop a program, TomcatGuardian and i put it in a service because i need to run it in a server without Administrator logged in.
    Regards,
    Ivan.

  • How to edit the application : tc~sec~ume~wd~enduser/LogonHelpApp

    Hi
    How to edit this application?
    When the end users use this application they are not returning back to the logon page of the portal - but to the zdsfdasf/index.html og the J2EE - which may result in confused end users.
    Anyway - how to change the redirect when selecting the Submit or Cancel button?
    Earlier you could used the com.sap.portal.runtime.logon.par file and make changes, upload it and change the autscheme.xml to use your custimized application - that does not work from SAP EP 7.0 SP11

    I've the same issue.  I'm sure, there are many clients who updated it.  Can somebody post a response on the above question.  How to modify sap.com/tcsecumewdenduser/Logon web dynpro DC?
    Thanks

  • How to configure Sun Java System Application Server Enterprise Edition 8.1

    hi all,
    How to configure Sun Java System Application Server Enterprise Edition 8.1 to my IDE..( jstudio)
    I have installed jes for my windows system.. so that i have removed platform version of Application Server..
    I try to add the Enterprise application Server (Sun Java System Application Server Enterprise Edition 8.1) to JStudio IDE..
    but i couldn't;

    Configuring your IDE to integrate with Sun App Server is something you probably will have to ask in some sort of JStudio forum. Other than for Netbeans, Eclipse, or possibly IntelliJ IDEA, you might not have much luck answering an IDE question here. I could be wrong though. Maybe somebody will have an answer for you and set me straight.

  • How to make fields editable in Personal Profile Application(WDA)

    Hi Experts,
    I am not able to make the  passport field field editable in Personal Profile Application.
    The passport field is uneditable. How do we make it editable so that user can enter Identity No.
    Please help.
    Regards,
    Priti

    Hi Priti,
    Do not maintain use case B* - This is not editable.
    Maintain Use case A* - This is editable.
    Did you maintain entries in this below table.
    In this table - V_T7XSSPERSUBTY
    Regards
    Somu

  • Dreamweaver and PhoneGap: How to Edit the Application Manifest for an Android app

    I successfully created an Android app using dreamweaver cs6 and the PhoneGap build service.  I submitted the app and it is live in Google Play.  The only problem is that the app is requiring all kinds of permissions from users that are not necessary for the app.  The app requires Internet access, but it does not require access to the camera or the user's contacts, etc.  I understand that this information is held in the Application Manifest file, but I don't know where that file is.
    Can you help me figure out how to edit the Application Manifest file for my android app?
    Thanks,
    Michael

    To edit permissions, you do so in the config.xml file. After making changes, you can directly upload on build.phonegap.com or from within Dreamweaver.
    See this page for info on customizing config.xml: https://build.phonegap.com/docs/config-xml#features

  • I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?

    I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?

    Go to System Preferences / Accounts - Login Items.
    In order to make changes, click the lock icon bottom left corner of the pane. You may be prompted for your admin password.
    Select the apps you don't want to launch on startup then click - (minus).

  • Edit start-up applications ??

    hi all
    I have installed the Cairo-dock application and launch it , everything is OK , but it disappear automatically when I reboot.
    so how I can modify the start-up applications in Gnome-shell ??
    thanks

    Please learn to search the wiki before asking questions here. This one, for example, as some of your others, is well documented:
    https://wiki.archlinux.org/index.php/Gn … logging_in
    Help vampirism is discouraged.
    Closing.

  • How to start an application in the background using "oscmd" on windows

    Is there any way to launch a windows application using oscmd without suspending xmath?
    From a "cmd" window one can use the start command:
    > start notepad
    Which starts the application without suspending the "cmd" window.
    From xmath command line, one may use:
    > oscmd("start notepad")
    This starts the application. However, the user cannot interact with xmath as long as the application is running.
    Thanks
    Xmath715, windows xp version 5.1 SP2

    Hi Farshid,
    There is a command in the Shell API of Windows that runs an executable:
    #include <utility.h>
    #include <ansi_c.h>
    #include <shellapi.h>
    #include <windows.h>
    int main (int argc, char *argv[])
        int res;
        if (InitCVIRTE (0, argv, 0) == 0)
            return -1;    /* out of memory */
        HINSTANCE stuff;
        stuff = ShellExecute(NULL, "open", "notepad.exe", NULL,NULL, SW_SHOW);
        printf("%i",stuff);
        return 0;
    You can build a similar program into an executable and since the Parent
    executable will finish executing, control will return to XMath even
    while notepad is still open.
    Richard
    Field Sales Engineer, New Jersey
    National Instruments

Maybe you are looking for