How to edit out the iMovie credit in my movies

I am making movies in iMovie using the ready made library......
How do I get the iMovie name out of the credits and replace with my own?
Dave says thank you!

Try these options:
Credit Kappy.
Ciao.

Similar Messages

Can I edit out the middle of a video clip in iMovie?

I know how to crop the beginning or end of a video, but I would like to crop out a section in the middle. I don't want to lose the part following the cropped frames. What must I do? Thanks for any advice you can offer. Miriam

Can I edit out the middle of a video clip in iMovie?
Yes.
What must I do?
Basically you have three options:
1) If the clip is in the "Event" window, simply select (i.e., set and adjust if necessary "in" and 'out" points) the segment you want and transfer it to your "Project" window and place it where you want it.
2) If the clip is already in the "Project" window, simply select (i.e., set and adjust if necessary "in" and 'out" points) the segment you want to keep...
a) and press the "Split" option in the edit menu (or the "Split Clip" option in the context menu) to divide the clip into three segments. Then select each of the segments you don't want and press the "Delete" key to remove them from the "Project" window.
b) or, even easier, simply press the "Trim to Selection" option in the "Edit" menu.
All of these work flows do not physically remove anything from the "Event" but merely perform a non-destructive edit of the project for the purpose of later output.

How do you edit out the date and time stamp from a photo

How do you edit out the date and time stamp from a photo

You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie

How do i edit out the dark places in a pdf?

how do i edit out the dark places in a pdf? I xeroxed pages from a book, and the xeroxes were not of great quality--lots of shadows where the book opened on the copier glass.
When I had the xeroxes scanned, the dark places turned deep black and made the xeroxed/ scanned texts almost unreadable.
How can I lighten the images in the PDFs so that the text is readable again?

Depending on your Acrobat version; see if anything in these Blogs help
http://blogs.adobe.com/acrolaw/2007/12/cleaning_up_scanned_images/
http://blogs.adobe.com/acrolaw/2014/01/how-to-erase-and-clean-up-a-scanned-pdf-in-acrobat- xi/

I don't know how to program my DVR to edit out the commercials

I had heard that that feature was available with the DVR. Does anyone know how to do that?

There is no way to edit out the commercials. If you are watching a previously recorded show or are in a buffer for live TV, you can skip past the commercials. The skip button on the remote and be programmed to jump ahead 10sec, 30 sec, 1 min, 5 min. So set the time frame to skip and press the skip button until you are past the commercials. I then use the previous button to jump backwards to where the show started again. That can be programmed to the same time frames. Me personally, I have mine set to skip 30 seconds and jump back 10. With the average commercial break being 3 minutes, I press the skip button about 6 times very quickly, then press it until I'm into my show. Once in my show, I jump back 10 seconds at a time until either the very end of the commercial break or the start of the show.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Recorded a software instrument on garageband, how do I edit out the "silence"?

I have recorded a software track, how do I edit out the "silence" that was created before and after I recorded using the keyboard?
Hope that made sense, thanks.

If you want to get rid of it forever, you could also snip and delete it:
Move the red timeline to the spot where you want to snip and remove the silence before your music comes in. Press Command T to snip. Then click anywhere in the work area to deselect all segments. Then select the beginning silent segment by clicking on it, and delete. Do the same at the end.

How to find out the person who did a transport.

How to find out the person who did a transport.
There are 3 basis admins in our Org.
so is there a way of tracing out , who did what transport.
Regards,

- Goto import Overview (STMS)
- Import Queue
- Select DEV req (goto Import History)
- Edit - Display More
It will show the user who did the transport
Rgds

How to find out the Tcodes for the exits

Hi All,
how to find out the Tcodes for the exits. i have a list of exits (customer, user, badi ). i need to find out what are the Tcode affected by this exits.
Customer Exits: EXIT_RFEBBU10_001
                          EXIT_RFEKA400_001
                          EXIT_RFFOEXIT_100
User-Exits: USEREXIT_DELETE_DOCUMENT
                   USEREXIT_FIELD_MODIFICATION
                   USEREXIT_MOVE_FIELD_TO_VBAK
                   USEREXIT_PRICING_PREPARE_TKOMP
BADI: CUSTOMER_ADD_DATA_CS
          HISTORICAL_VALUES
          MD_ADD_ELEMENTS
          MD_CHANGE_MRP_DATA
          MD_PIR_FLEX_CONS
          MD_PLDORD_POST
          ME_REQ_POSTED
          NOTIF_EVENT_SAVE
Can anyone help on this <urgency factor removed>.
Regards
Ksihore
Edited by: Suhas Saha on Feb 20, 2012 12:58 PM

i have just started reading about all these-user exits ,customer exits etc.
i have read somewhere that:call to customer exits are triggered by function modules exits.
the structure of function modules are like this:
EXIT_RFEBBU10_001
MEANS
Keyword EXIT followed by program name fllowed by three digits.
and the call is like this:
call customer function 0001.
From above we can conclude that this customer exit must be used in program RFEBBU10.
GOTO SE38 andenter prog name RFEBBU10.check for above function module.
for the rest i stick to the same method for user exits and BADI that we can findthe corresponding TCODES
using Where used lists.
please Tell me if i m wrong!

HOW to find out the tablespace space utilized by a patch after applying the

someone has already applied the patch in test env before recording the tablespace size , so I cannot find out the figure in test env.
So is there any general practice or general guidelines on it?
hOW to find out the tablespace space utilized by a patch after applying the patch?
Thanks & Regards,
Sree.
Edited by: 846579 on Mar 22, 2011 10:50 PM

I think there is no direct way to determine what tablespace is utilized by a patch from the README file. You could check the content of the patch file and see what modules are affected (assuming there are changes and the database level), then query DBA_USERS (DEFAULT_TABLESPACE column) for those schemas which are updated by a patch. Or, you could check the size of the tablespaces before and after applying the patch and you will determine what tablespaces have been utilized (provided that the application services are down, and none of the application users is connected to the application).
Thanks,
Hussein

How to find out the Non Partitioned Tables used 2Gb on oracle

Hi team
how to find out the Non Partitioned Tables used > 2Gb on oracle where not is sys & system
regards

heres 1 I made earlier
set pagesize 999
set linesize 132
col owner format a25
col segment_name format a60
select owner,segment_name,segment_type,(bytes/1024/1024)"MB size"
from dba_segments
where owner not in ('SYS','SYSTEM','XDB','MDSYS','SYSMAN') -- edit for taste
and segment_type = 'TABLE'
having (bytes/1024/1024) > 2000
group by bytes, segment_Type, segment_name, owner
order by 4 asc

Does anyone have any idea how to find out the version of weblogic plugin

Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
I could not find version in plugin directory.
it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
Sun One 6.1 SP6
Weblogic 9.2
Solaris 5.10
Edited by: 985608 on 01-feb-2013 8:20
Edited by: 985608 on 04-feb-2013 6:25
Edited by: 985608 on 04-feb-2013 6:27

Hi,
You can find version of weblogic plugin using below command.
strings <plugin module file> | grep -i wlsplugins
Mark if this helps.
Regards,
Kishore

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

How to find out the BI Publisher Version from the Excel output generated.

Hi
Can any one tell me How to find out the BI Publisher Version from the Excel output file generated using BI publisher.
Edited by: 781689 on Aug 1, 2010 10:22 PM

Hello,
This forum is the "Oracle Reports" OTN Forum.
The "BI Publisher" OTN Forum is here :
BI Publisher
Regards

How do i copy The iMovie video from Mac, to iPad mini?

How do i copy The iMovie video from Mac, to iPad mini?

The easiest way is to firstly export the movie to iTunes (Share > iTunes), then sync the iPad Mini with iTunes. In iTunes, include your movie as an item to be synced. After syncing, on the iPad it will appear in the Videos app. That's how I do it for my wife's Mini.
If you need help with exporting or with syncing to iTunes, please post back.
I'm caught up with something else at the moment, otherwise I'd give you full instructions now (just wanted to get this to you quickly).
John
Message was edited by: John Cogdell

Voiceovers - How to Edit Out Breaths and Move Audio Track Together

I am a Voiceover professional and new to Logic Express. I have learned how to edit out breaths between sentences to conserve time if I have to, but I do not know how to move the track together to eliminate the resulting "silence gap". Is there a way to grab/select and drag?

I think you will find this free video tutorial helpful. Click on "Organizing the Takes."
Ron

How to edit out the iMovie credit in my movies

Similar Messages

Maybe you are looking for