How to edit planning table so that only promote option comes for user

how to edit planning table so that only promote option not aproove, comes for user for process management in planning unit state first pass.
i am using 11.1.1.3 planing version, i have to do this customization very urgently.
guys pls give some clue...thanks in advance!

Hi John,
a lot of thanks for your valuable help on this forum.
if u see first pass state options, it gives only two options(promote,approve) but for other states it give >2 options so they must have put some condition on first pass state by restricting it to two options only.
do u have any idea in which table this condition has been put so that i can restrict it further to 1 option only.
thanks.

Similar Messages

How does one handle Stock agencies that only allow 64 characters for keyword lists

since LR4 puts the keywords in alphabetical order the keywords would be truncated and my most popular keywords would not make it to agencies search engines. Anybody know of a way to put the most powerfull keywords up the front. Or do I need to edit keywords specifically for this agency thus doubling my work.

The Enet-485 contains several levels of buffers which impact how flow control works. When you write data from the PC the data buffer is transmitted to the Enet-485 where it is stored to be transmitted out of the desired port. In addition to deep software buffers, the Enet-485 also has a deep (128 byte) hardware FIFO that lays just above the physical (RS-485) layer.
This FIFO is "RTS/CTS" sensitive and can react (ie: "turn off") very quickly in response to RTS/CTS handshaking. However the software flow control (XON/XOFF) is handled by the Enet-485 firmware. Thus if the TX FIFO has more then 5 bytes and an XOFF is received, it is not possible to turn off the serial stream until the FIFO is empty, which causes a data overrun.
The reason why wait
ing between bytes works (but is slow) is that at any time an XOFF character is received, the FIFO will contain less than 5 bytes and thus not overflow.
However, if you know the size of the receive buffer, then is it possible to send data in lagre (40k) chunks with a slight pause between to allow for the XOFF to be received and processed? You can guesstimate the timing based on the baudrate, buffer size, and network delay (typically ~100ms but can be more).

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How do I create a rule that only applies to one mailbox?

How do I create a rule that only applies to one mailbox? For example deleting the messages in the box after 10 days.

You don't. Rules are applied only to new incoming messages, or manually to the selected messages. They cannot be used to delete messages after an amount of time. You could create an AppleScript or Automator action that would do that and then use a recurring event in iCal to run that script.

I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

I'm having issues with my gmail accounts in Mail since I upgraded to OS X Mavericks. All the mails start downloading again! How do I correct this so that only the new mails in these accounts get downloaded?

How to redownload an itunes audiobook that only partially downloaded?

How to redownload an itunes audiobook that only partially downloaded?

Audiobooks are currently a one-time only download from the store, so if it didn't download properly then you will need to contact iTunes Support, which you can either do via the 'report a problem' page : http://reportaproblem.apple.com
Or (and ff the 'report a problem' link doesn't work) then you can try this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Building a page that only shows up once for the same user...

I've been asked to create a page that only shows up once for a user. This page is to include a form that the user fills out, but once the user has filled it out, they wouldn't see the page pop up ever again. Does anyone know the best way to do this?
I was told to build an ip logger that checks the database for ip addresses and only shows the page if the ip address is unique. That might be way beyond my ability. Is there a program out there that I could possibly use?
My client wants this done asap, so any help would be much appreciated...
Thanks in advance!
Jules

Some limitations of cookies are that user needs to enable cookies, cookies expire, cookies can be deleted by the client, and they're dependent on the machine/browser that the cookie was set to. Basically, by using cookies, you as a developer do not have any control over the presentation of the data for the visitor because the visitor can manipulate how the data is presented.
That means if more than one person shares the same browser on the same computer then after user 1 visits the page and sets the cookie then users 2,3,4 or whatever will not see the landing page that was intended for a first time visitor since user 1 already set the cookie. Once cookie expires the script will not see a valid cookie so the landing page will display once again. If cookies are disabled on the browser then a cookie will never be set and the landing page will always display. If cookies are enabled on the browser and cookie is set by a user then later the user deletes the cookie from their browser then the landing page will display.
Cookies can be set and checked using javascript or server side scripting. There's plenty of information on the limitations of cookies and how to set and check for set cookies if you search online for php cookies, javascript cookies, etc. or visit http://www.w3schools.com/PHP/php_cookies.asp
Control of your data from a database is the best method of development. If you do not have a registration system currently developed and it's imperative for each individual user to complete the form before continuing on to the site, then the form you speak of *IS* the registration form and should be developed with a database. What information does the user have to complete on this form?
Sometimes there are situations where you do not want to force a signup/login for the user to access a page, yet you still want to control data to some extent. In these scenarios the use of cookies is the only reasonable alternative, which is arguably better than using an IP method. It really all depends on the circumstances that are being considered. Personally I don't think this situation is well suited for cookies or IP use. Based off the information provided I believe this should be developed using a database and server side scripting. It also depends on the importance of the page that is being displayed after the landing page and the importance of the data retrieved from the submitted form on the landing page. If it's of low importance then go with a compromised method such as cookies or IP. If the data is important then use a database.
best,
Shocker

How do you determine the picture that is shown on iTunes for your podcast?

How do you determine the picture that is shown on iTunes for your podcast? Is that done in iWeb or Garagetunes?

That is a supported format,
Pull the battery while the device is ON, replace after a minute, Let the device reboot 1-3 min,
see if the problem is fixed,
If not we may have to reload the device OS to get back the missing option.
Thanks,
If you need more info please ask! If not please resolve the thread using the options by the Kudos’ star, Just place the check in the Post that answered your question, Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

How does one add tables to an existing universe using COM designer SDK.

Morning All
How does one add tables to an existing universe using COM designer SDK. I have tried:
objUniverse.Tables.Add (strTable_Name)
but get "Cannot create Table" error.
Any ideas?
Thanks in advance.
Anita

Hi Anita,
-Use the Add method to add classes and objects to an existing universe using a VB 6 application.
Adding a Class
Definition: Function Add(Name As String) As Class
Syntax: NameOfClassesVariable.Add
Adding an Object Instance
Definition: Function Add(Name As String, [ClassName As String]) As Object
Syntax: NameOfObjectsVariable.Add(name, [class])
- name is the name of the object.
- class is the name of the class containing the object. This parameter should be used in cases where more than one objects exist with the same name.
Sample Visual Basic 6 Code
Dim DesApp As Designer.Application
'MODIFY AND EXPORT CLASSES AND OBJECTS OF AN EXISTING UNIVERSE
Sub modify_and_export_universe()
Dim DesUnv As Designer.Universe
Dim DesCls As Designer.Class
Dim DesObj As Designer.Object
Dim DesDBCol As Designer.DBColumn
Dim DBColName As String
Set DesApp = New Designer.Application
'Login to designer
Call DesApp.LogonDialog
'Make sure to log on with your administrator profile
'e.g : "hostname","username", "password","Enterprise"
'Make Designer application visible
DesApp.Visible = True
'This line disable warning messages from Designer
DesApp.Interactive = False
'to Open locally the universe you want to modify
'Set DesUnv = DesApp.Universes.Open("club_uni")
'Use OpenFromEnterprise method (Universes Class) to import a universe from the repository and opens it
Set DesUnv = DesApp.Universes.OpenFromEnterprise("Universes", "club_uni", False)
'Add a valid connection which already exists
DesUnv.Connection = "club"
'open the universe
'Call DesApp.Universes.Open("club_universe")
'Add the table Account and refresh the view in the main window
Set DesTab = DesUnv.DBTables.Item("Customer").Insert
DesUnv.ArrangeTables
'Add a class
Set DesCls = DesUnv.Classes.Add("Class MyCustomer")
'Looping through all the fields of the DB Table Account
For Each DesDBCol In DesUnv.DBTables.Item("Customer").DBColumns
'Store name of the column
    DBColName = DesDBCol.Name
     'Add an object to the class
    Set DesObj = DesCls.Objects.Add("Obj " & DBColName)
     'Affect a field to the object
    DesObj.Select = "Customer" & "." & DBColName
Next
'Save the existing universe with the same name club_uni or you can change
DesUnv.SaveAs "club_uni"
MsgBox "Universe created and saved Class MyCustomer has been added!!"
'Close the universe
UnvFullName = DesUnv.FullName
MsgBox "The UniverseFilePath is " & UnvFullName
'Close the universe
DesUnv.Close
'This line disable warning messages from Designer
DesApp.Interactive = False
'Export the universe to the CMS DB (to the last universe folder)
'Make sure you save the universe before exporting it
Call DesApp.Universes.Export("Universes", UnvFullName)
MsgBox "This document has been exported successfully !!"
'Close designer
DesApp.Quit
Set DesApp = Nothing
End Sub
Hope this helps.
Regards,
Deepti Bajpai

How to create sharepoint Group with read only permissions using powershell for entire site ?

How to create sharepoint Group with read only permissions using powershell for entire site (including subsites and top level site)

Hi
using (SPSite site = new SPSite(url))
using (SPWeb web = site.OpenWeb())
SPUserCollection users = Web.AllUsers;
SPUser owner = users[string.Format("{0}{1}", "Domain", "Owner Username")];
SPMember member = users[string.Format("{0}{1}", "Domain", "Default Member Username")];
SPGroupCollection groups = Web.SiteGroups;
string GroupName = “Super Exclusive”;//your group name
string GroupDescription = “Super exclusive group description.”;
groups.Add(GroupName, owner, member, GroupDescription);
SPGroup NewSPGroup = groups[GroupName];
SPRoleDefinition role = Web.RoleDefinitions["Read"];
SPRoleAssignment roleAssignment = new SPRoleAssignment(NewSPGroup);
roleAssignment.RoleDefinitionBindings.Add(role);
Web.RoleAssignments.Add(roleAssignment);
Web.Update();
Please 'propose
as answer' if it helped you, also 'vote
helpful' if you like this reply.

How do I compress a video that 160mb to 25 mb for an email

How do I compress a video that 160mb to 25 mb for an email

After it's re-encoded using a lossy format, the OP could also use an application (of choice) to create a segmented file (rar, etc.) and send each portion in individual emails. Most severs won't allow anything over 5 GB, so the user could choose 4 GB segments and the receiver could use a free un-rar app (quite a few available in the App Store - even more for Windows users) to extract the video.
Just some random thoughts...
Clinton

HT3702 how do I cancel an application that I am being billed for monthly that does not work

How do I cancel an application that I am being billed for monthly that does not work anymore?

How to report an issue with Your iTunes Store purchase
iTunes Store: Purchasing and managing auto-renewing subscriptions

How to handle form close event or escape key press event for user defined f

Experts,
Please let me know how to handle form close event or escape key press event for user defined form...
Thanks & Regards,
Pravin.

Hi
You can catch the form close event like this
If ((pVal.FormType = 139 And (pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_CLOSE)) And (pVal.Before_Action = True)) Then
      Try
               SBO_Application.SetStatusBarMessage(pVal.EventType.ToString())
      Catch ex As Exception
                SBO_Application.SetStatusBarMessage(ex.Message)
        End Try
      End If
Hope this helps
Regards
Arun

How to edit database table in jsf

Hi all!
Can anyone give me some clue or link on editing database table in jsf, i have got the database table values shown using h:dataTable but i'm unable to edit and save them in database,i also want to perform jsf validation while editing so that illegal values may not be entered?
Thanks in advance.

Tougher than what? I suggest you try again. It is all there, including sample code, which is a lot more than you're ever going to get here. If you have a specific question, ask it. But just bleating that it's all too hard isn't going to get you anywhere, here as in life.

How to display the table components that make up a structure?

Hi,
How does one display the table components that make up a structure?
I want to see the table fields that make up the structure EKBEZ.
Thx.
Andy

Hi
GOTO SE11 , type the structure name in DataType optional feild , you will get the feilds that make the structure
Kindly rewards the points accordignly
Regards,
Pranshu

How to edit planning table so that only promote option comes for user

Similar Messages

Maybe you are looking for