How to Edit Post Script file Programitically Using PSUTILS in Windows XP

I am haiving millions of post scripts file. Each having 4 to 5 pages. Except at page number one each page has little content. So though the content size is small but stationery wastage is quite high.
I googled arround and came to know about a produch PSUTILS that could narrow down my page numbers.
But unfortunelely, I am not able to get through that how it works.
Anybody having idea may please expalin in detail step by step that how to use Psutils. Anyother like software may also be intimated please.
PSUTLIS may be downloded from
http://gnuwin32.sourceforge.net/packages/psutils.htm
My sample PS file can be downloaded from
https://www.dropbox.com/s/m80x4hfcpf49r5x/1010493909.ps
Regards
[email protected]

Hi gimbal2,
about code
jTextArea1.setText(e1.getMessage());I am using this code so that the user will be prompted with a message rather than stack trace.
About the issue I am getting on linux i believe its because of following statement.
processBuilder = new ProcessBuilder("sqlplus",userName+"/"+password+"@"+databaseName, script_location); //ORACLERegards,
Ajay
Edited by: Ajay Sharma on Nov 23, 2012 12:05 PM
Edited by: Ajay Sharma on Nov 23, 2012 12:06 PM

Similar Messages

How to Print Post Script Files

Hi All,
I am trying to make a utility software in foxpro that could print post script file on:-
1) Post script printer
2) Non Post Script printer
Operating System Windows 95 & above
Help is requested from all the community members
Reagards
Harsh

PostScript printer - send it to the printer port e.g. LPT1: with a simple copy.
Non-PostScript printer - you'll need to buy a PostScript RIP, or perhaps use Acrobat Distiller to convert the PostScript to PDF, then print the PDF with Acrobat's API - see the Acrobat SDK. (This is not possible with the free Reader).

Converting Back to Original PDF Using Post Script File

Is there any way to convert back to an original PDF using a post srcipt file that was created from that original PDF? Allow me to fully explain my situation:
I converted multiple pdf's that I created into a post script file. I then utilized Adobe Distiller to convert them into a pdf that could be used for better printing and better usability by the end user. Unfortunately, when Distiller did this conversion, it replaced my original pdf with the new one. By the time I realized what was happening, all files had been replaced.
I still have the post script file that was created from the original PDF file; is there any way possible using this post script file that it can be somehow converted back to the original PDF file? There are some edits that I need to do on the original PDF. The pdf that Distiller creates doesn't allow for anymore edits. My goal is to be able to make my edits without having to re-create 37 pages of documents.
The software versions I'm using are as follows: Adobe Acrobat X Version 10.1.4, Adobe Distiller Version 10.1.438.
If anyone has any ideas, please let me know!

Hello, thank you for responding.
Yes the url links start with http:
For example when I type in
http://canberracontemporaryartspace.wordpress.com/2013/07/06/staying-out-of-trouble/
in the word document and click on it, the link works; but when I save it as a pdf it says "not found"
And then when I type in
http://www.camberwellspecialists.com.au/what-is-skin-cancer.html
in the word document and click on it, the link works; but when I save it as a pdf it says "page not found"

How can I rip a 10" x 10" post script file from InDesign 6, it keeps telling me "the active document

How can I rip a 10" x 10" post script file from InDesign 6, it keeps telling me "the active document uses multiple pages sizes and won't print. My page sizes are all 10" x 10"

Please post in the InDesign forums here http://forums.adobe.com/community/indesign/indesign_general. They will be able to help you.

Saving PDF files as Post Script files using Adobe Professional

I have a 2 Page PDf document that mainly has Text on each page. Both the Pages have a 2D Data Matrix Barcode also.
I opened the PDF file in Adobe Professional and saved the file as Post Script file.
Post Script file gets saved successfully. When I open the Post script file - It has almost 40,000 line for a 2 page post scipt file.
It has lot of Hex data that looks so huge in the file. ( I thought only Images get converted to Hex format).
Is there a setting or something I am missing that I have this huge Post script file for a 2 page text file PDF

Your barcode may be a high resolution graphic. A lot of junk (hex) is what you would see in such a case with PS. How it looks to you may depend on what application you are using to view the PS file. If you open it in a code or text editor you might get a better idea of what is there. I don't look at PS files much and agree with graffiti's question of why do you want to?

Hi I need help ..I do not know how to edit a pdf file that I scanned in,

Hi I need help ..I do not know how to edit a pdf file that I scanned in, will someone please tell me what I should do PLEASE HELP

What program are you using? If it is just Adobe Reader you can not edit.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

SapScript output spool to a POST script file

We generate billing invoice output using custom
program/Sap script. Subsequently we release the invoice print out from
the print spool to create a post script file from the print spool by configuring command set "G" in
transaction u201CSPADu201D. This processis is working fine in R/3
However, when we migrated the same functionality to ECC, we are finding
that the file created containing only garbage data.
Anyone has encountered this issue and have suggestions to resolve this.
Thanks
Palani

Hi Gary
How the issue is resolved, please let me know. Since i am also facing same issue.
Thanks
M G Shankar

I am getting some errors while distilling the post script file.

I am getting some errors while distilling the post script file. please check and suggest me, how to control this?
<PDFX ISO="15930-1:2001" COMPLIANT="true">
PDF/X Compliance Report
1. Summary
   Warnings: The total found in this document was 0.
   Violations: The total found in this document was 0.
   No problems were found in the document.
   This document passes PDF/X-1a:2001 compliance checks.
</PDFX>
Regards,
Jack

@Jack – you were using a joboptions file by Distiller to convert a PostScript file to a PDF/X-1a.
What you get is no error message, just a report, that everything went ok. And in this case I cannot see any advantage using PDF Export for printing to PostScript/distilling to PDF. Ok, maybe one, CS5 and above would export in a background process.
To prevent InDesign flattening transparency, you could use PDF/X-4 as your export setting. You cannot use writing to PostScript for that task.
Check including tags for tagged export to prevent misalignment of text because of a strange bug with PDF Export when you are using 9pt text on 12pt leading or text with a ratio of 9/12 for point size and leading in multicolumn text frames.
Uwe

How to edit move rename files in iTunes

how to edit move rename files in itunes

I don't like iTunes.
I don't want iTunes to keep the physical location of my files because they can be on a SD card, or an USB drive and i don't want iTunes to stop me from playing a song because it cannot find it anymore.
So i would like to use physical files just to upload to iTunes Match and then delete the link to the physical file.
If needed, iTunes Match will download the file.
The problem is just that i would like to delete all references to physical files to make iTunes Match download the file only when needed and stop using the first version i had given to it
maybe i could have a Apple Script to check if there is a physical file referenced and if so delete it to have only the Cloud version

Unable to create post script file in framemaker.

I installed TCS 4.0 licensed suite. Due to some reason I need to delete Adobe PDF from Devices and Printers. Since then I am unable to create post script file using framemaker. I have tried uninstalling and installing TCS 4.0 again, but all in vain. What should I do now?

If you delete critical parts of Acrobat there will be problems. Try doing a REPAIR of Acrobat Pro (from the Programs Control Panel), maybe it can undo the damage.

How to edit the nbu file when the mobile device is...

How to edit the nbu file when the mobile device is not connected?
That software that is available in the nokia site “nokia phone browser” is not useful! Why?
It is not working unless the mobile device is connected (attached)
It is quite slow when editing the contacts! (attached)
Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
Is there some workaround in this regard?
Is there some software the can edit the nbu files?
Thank you for the help,
Best
Jamal
Attachments:
Clip_774.jpg ‏166 KB
Clip_775.jpg ‏127 KB
Clip_773.jpg ‏243 KB

when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
Merry Chrasmas too ;-)

Exctract data from Post Script file

Hi all;
I need to extract, manipulate some data from post script file send them to database.
How can i do that process?

OT: Hey Rene, I see you've become a local celebrity
around here!I'm still waiting for the groupies to show up, though. No luck so far. :p
I think it's a nice initiative and
enjoyed reading the interview.
; )Thanks. :)

How can i get a file header using this method cl_gui_frontend_services= gui

Hi Experts,
How can i get a file header using this method cl_gui_frontend_services=>gui_download
Thanks
Basu

Hi,
You can use the FM - GUI_DOWNLOAD to specify the headers. It can be done in the following manner -
TYPES: BEGIN OF ty_head, "Structure for header
             h(10) TYPE c,
             END OF ty_head.
DATA: it_head TYPE TABLE OF ty_head WITH HEADER LINE.
"Adding header details
it_head-h = 'Field1'.
APPEND it_head.
it_head-h = 'Field2'.
APPEND it_head.
it_head-h = 'Field3'.
APPEND it_head.
it_head-h = 'Field4'.
APPEND it_head.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename                        = p_file
   filetype                        = 'ASC'
   write_field_separator           = 'X'
   header                          = '00' "<= note this
TABLES
    data_tab                        = it_tab
   fieldnames                      = it_head[] "<= Pass your header table here
EXCEPTIONS
   OTHERS                          = 1.
Hope this helps.
Regards,
Himanshu

Reading post script files

Does Adobe offer a program that reads post script files?

Adobe Acrobat can convert Postscript to PDF and display the PDF.

Append file name using FileSelectPopup under Windows 7

Hi,
I saw the following thread for the same issue in Vista, just wanted to make sure that this issue has been fixed for Windows 7 also before I upgrade to the latest version.
http://forums.ni.com/t5/LabWindows-CVI/Append-file-name-using-FileSelectPopup-under-Windows-VISTA/m-...
Thanks,
Karthik
Solved!
Go to Solution.

Hi,
I ran across that issue when I was running applications built under CVI 7.1.1 on Windows 7. I can verify that rebuilding the application under CVI 2009 SP1 and later CVI 2010 fixed the issue. So you should be ok.

How to Edit Post Script file Programitically Using PSUTILS in Windows XP

Similar Messages

Maybe you are looking for