How to edit PSA and continue the load with corrected data from PSA.

Hi,
Can you guide me on how to edit data in PSA and then continue a load?
i.e. if you can provide me with the steps on how to fix a load problem if a load fails. The load fails and Monitor shows red, so how do I fix them in the PSA and then allow the load continue with the corrected data into the data target.
I will appreciate the details steps involved.
Thanks

Hi
First select that request then turn to Red and delete the Request , delete the qeruest then system allow to edit the psa data ,selete psa then selet packet then selet record double click modify the data, dont forget after completing save the data. after competing modification then select psa right click select- start update immediatly......
thanks
ram

Similar Messages

HOW TO GENERATE FINITE AND CONTINUOUS PULSE TRAIN WITH USB6216 AT THE SAME TIME?

Hello.
I am using a USB6216 DAQ and need to generate a 20 kHz signal using the
ct0 output and at the same time I need to generate a finite number of
pulses, say 9, on a software trigger using the second counter output
ct1.
Currently, I have two VIs that can do this separately, but when I want
to integrate these into one single VI y get an error in the finite
pulse train for ct1 that indicates that the requested task is already
reserved. I am thinking this has to do with the fact that maybe both
types of task use the same timebase but I have not found the way to
solve this problem.
Any help would be very much appreciated.
Thank you.
Sincerely
JSL

Hello.
If anybody is interested, the problem is solved.
There is no resource confilct if I generate the 20 kHz continuous pulse
signal using the frequency out terminal, and this way I can use both of
my counters as I please with no problems.
It's kind of fun to answer one's own questions...
Sincerely
JSL

I have just gone through the start upo process for a new iMac and skipped the section to upload data from my old computer from an external hard drive. How do I do this now?

I have just gone through the start-up on my new imac and opted to skip the bit where I sync / upload info from my old computer which is on a My Passport external hard drive. I would like to do this now. How do I? Thanks.

See the Second Chance to Use Setup Assistant here...
http://Pondini.org/OSX/SetupLion.html
Also see here > http://support.apple.com/kb/HT4889?

How to find out and locate the top 100 max elements from a 4D array

I try to find out the 100 maximum elements in a 4D array and then I want to put the result in a 2D array, Which should show me the locations of the elements and the values of those elements
====================
=Labview 7.0 & 8.0 & 8.5=
=====================

Hi,
Don't know why you want a 2D array, this VI puts the results in a bundle.
Just because it seems more practical to me (there's less room for
mistakes)...
The VI works as follows:
The max value is returned, incl. it's index.
Then it is replaced by the original minimum value, minus one.
If the last found maximum is the (original) minimum, everything is skipped.
If you really want a 2D array, instead of a bundle, replace the contant with
an empty 2d array, the bundle with a build array, and the indicator with a
2d array...
Regards,
Wiebe.
"asd iyvjh" wrote in message
news:50650000000800000017AC0000-1066448259000@exchange.ni.com...
> I try to find out the 100 maximum elements in a 4D array and then I
> want to put the result in a 2D ar
ray, Which should show me the
> locations of the elements and the values of those elements
[Attachment Max 100 Values From 4D Array.vi, see below]
Attachments:
Max_100_Values_From_4D_Array.vi ‏45 KB

FR Studio - Is there a workaround for the issue with referencing data from a grid with a different DB connection and different # of dimensions?

Hi,
I am trying to reference a column in a different grid with a different database connection. I did some research in the forums, and it seems like this is a known issue with FR Studio. The issue is that if the 2 different database connections have different # of dimensions, then the reference will throw an error.
For example, what I'm trying to do is below:
In grid2.column[A], I have the following formula:
grid1.column[A]
The result is an error.
The ultimate goal is to have a basic variance formula in the grid between grid1 and grid2, which have different database connections with a different # of dimensions. Is there a workaround at all to this bug? The example of the basic formula is below:
grid1.column[A] - grid2.column[A]
Any help is much appreciated!
Thanks,
Tiffany

Thanks for the detailed response Mike.
The issue with trying it in Grid1 vs Grid2 is that Grid1's DB connection has more dimensions than Grid2's DB connection. I can't change the DB connection to a database with more dimensions because you have to be able to map all dimensions from the existing DB connection (Grid1) to the new DB connection (Grid2). This isn't possible, so instead I have to map Grid2 (less dimensions) to Grid1 (more dimensions). It just ignores the extra dimensions from Grid1. Does that make sense?
Thanks again for your responses. It's very much appreciated.
Tiffany

How do I duplicate an image on the main screen so that I can edit it and compare the result with the original?

In Elements 12 How do I duplicate an image on the main screen (as well as the photo bin) so that i can compare any editing with the original?

In full Editor, go to Edit>Preferences>General and check "Allow Floating Documents in Full Edit Mode"
Open the image so that you see it in the project bin
Right click the image thumbnail in the project bin, and duplicate. It will come in as xxxcopy
On the Arrange icon at the top, select 2-up. You should see the original and the duplicate in the work area

HT4859 How do I find and access the photos that are bumped from my iphone to the icloud?

The photos on my iphone keep disappearing, I think because of the storage limits on the phone. My understanding was they were being stored "on the cloud," but I can't figure out how to find them. I have it installed on my iphone 4 and on my PC. Please tell me they aren't gone forever! Thanks.

Re-sync your device to iTunes and uncheck Sync under Photos.

How do I find and reload the music that is missing from my iTunes Library

I lost over 2000 tracks in my iTunes Library
They were still on my iPhone but now that I have upgraded to a new iPhone I can't load them onto the new phone
Help

What is "Other"
It’s generally a combination of local caches from apps, browsers, mail, Messages, Reading List, saved games, app-specific documents and data, notes, and voice memos.
You can backup and restore to reduce "other" but they will start building up over time.

How do I get an app to reinstall with no data from the first time?

Basically, I just want to restart the game, but when I reinstall it, the button doesn't say install, it is an cloud with a down arrow inside.
Thanks guys!

Hi, if the App is in the Dock, right click, choose Options>Open at login.
Or System Preferences>Accounts>Login Items window, drag the App there or click on the tiny plus icon to add it.

Error while updating data from PSA to ODS

Hi Sap Gurus,
I am facing the error while updating data from PSA to ODS in BI 7.0
The exact error message is:
The argument 'TBD' cannot be interpreted as a number
The error was triggered at the following point in the program:
GP44QSI5RV9ZA5X0NX0YMTP1FRJ 5212
Please suggest how to proceed on this issue.
Points will be awarded.

Hi ,
Try to simulate the process.That can give you exact error location.
It seems like while updating few records may be no in the format of the field in which it is updated.
Regards
Rahul Bindroo

I loaded my ipad photos from camera and all the pictures sorted by date. Next, I did a sync with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files?

I loaded my ipad photos from camera and all the pictures sorted by date. I later sync my ipad with my computer and the photos were all reorganized into IMPRT folders an out of date sequence. Any idea how to put the photos back into date files other than reloading all of them from camera?

What version of iPhoto?
Select one and rotate it. Then rotate it back. Does that make it appear?
A much better work flow is the keep the photos after importing. Check the success the import, wait for at least one successful backup cycle then use you camera's format command to reformat the card
LN

I want to get rid of a book in the iBooks "Purchased" collection, but when I touch the Edit button and select the book and then touch the Delete button, then the "Delete this copy" seletion, nothing happens. How do I delete the book from the collection?

I want to get rid of a book in the iBooks "Purchased" collection, but when I touch the Edit button and select the book and then touch the Delete button, then the "Delete this copy" seletion, nothing happens. How do I delete the book from the collection?

The Cloud by the song indicates that is is an iTunes purchase but it is not downloaded on the iPod. If you only want download iTunes purchases to show in the Music app go to Settings>itunes and pp Store and turn off Show aLL.

I want to share a folder of images with a client who is also using bridge. I want the client to be able to edit metadata and rate the image. How can I do this?

I want to share a folder of images with a client who is also using bridge. I want the client to be able to edit metadata and rate the image. How can I do this?

Metadata won't be a problem as long as you use Bridge to copy the file from within Bridge to whatever media (flash drive, CD/DVD. email, etc) you plan to use for the sharing.
I'm not sure about the Label part. Maybe it will travel along too.

How to interrupt an funtion call and continue the followed code?

for example, the code:
public class A{
public static void main(String[] args){
int i = 0;
method1();
system.out.println("exit");
public void method1(){
int j = 0;
while(true){
j +=1;
there is a error in method1(), so the call the method1( ) in main() will make an error.
how can i interrupt this funtion call and continue the followed code?

in actually, I can not control the method1(), that's
an remote object function.
So I can not add exception in methoes().Then in your main method catch whatever "Error" your method1 is throwing.

HT1725 I have paid for a movie rental, when trying to download but wifi got interrupted , therefore I can't see the movie in the download section , it's disappear and I have paid for it , how can I find the movie and continue the download ?

I have paid for a movie rental, when trying to download but wifi got interrupted , therefore I can't see the movie in the download section , it's disappear and I have paid for it , how can I find the movie and continue the download ?

In the "Store" menu, click "Check for Available Downloads"

How to edit PSA and continue the load with corrected data from PSA.

Similar Messages

Maybe you are looking for