How to edit sharring and proporties on TC.

Hello!
When i try to edit owner of my time capsule it is not possible.
Now it says:
Unknown: read and write (translated from danish..)..
Everyone: No access
My name is not there. And i cant change the present owner name.
What to do?

Hmm..
Now I have done that.
But my time capsule wont get back from "blinking".
You can reset your Time Capsule by pressing and holding the reset button on your Time Capsule for at least 5 seconds, until the orange LED on the front of your Time Capsule starts to blink. The Time Capsule will automatically restart itself after you let go of the reset button.
During the process, the LED on the front will keep blinking until the software has been completely reloaded and the hardware initialization has been completed. This process will take about 30 seconds, after that you will be able to configure Time Capsule again with the AirPort Utility.
Now I am completly lost.
I have tried reseting the internet. I have taken the power from the time capsule, my router, my computer. But every time the TC wont stop blinking.
What to do now?

Similar Messages

  • How can we share and transfer data at Labview using the internet

    How can we share and transfer data at Labview using the internet
    Dr. Eugene Berman, Moran Kamilyan and Ravit Bar

    [email protected] wrote:
    How can we share and transfer data at Labview using the internet
    Check these links:
    Basic TCP/IP Communication in LabVIEW
    Data Sockets
    Integrating the Internet into Your Measurement System

  • How to edit custom and/or user dictionaries in OPPM v.9 (NOT P6)

    Hi All:
    Thanx, Sachim for your help on my earlier question.
    Now that I have poked around a little more, I realized that I haven't seen anything about how to EDIT the dictionary files once created. The "organizational custom dictionary" text file could just be edited with any text editor, but what about the other available OPPM dictionaries?
    I've also noticed that if a User adds a word, it goes into his/her personal dictionary. That means that its not available to other Users. How does one clean them up of accidentally (or unintentionally) added mis-spelled words? Every other application I've ever used with a spell checker has that function somewhere, but I can't see it in OPPM. It would be great to be able, as an Administrator, to be able to "harvest" those added words, to share with the other users.
    Anyone have any info on these issues? Thanx in advance.

    if you are using 12.1.3/4 then you can do using "Define Parameter" screen to create LOV and attach to integrator.

  • How do you share and iTunes Library?

    We have two computers and share one iTunes account for purchases. How do we share libraries and both receive the purchased music?

    delphine25 wrote:
    We have two computers and share one iTunes account for purchases. How do we share libraries and both receive the purchased music?
    You can only download it once. After it is downloaded to one computer, use a flash drive to copy it to the other. See more information here.

  • How to edit PSA and continue the load with corrected data from PSA.

    Hi,
    Can you guide me on how to edit data in PSA and then continue a load?
    i.e. if you can provide me with the steps on how to fix a load problem if a load fails. The load fails and Monitor shows red, so how do I fix them in the PSA and then allow the load continue with the corrected data into the data target.
    I will appreciate the details steps involved.
    Thanks

    Hi
    First select that request then turn to Red and delete the Request , delete the qeruest then system allow to edit the psa data ,selete psa then selet packet then selet record double click modify the data, dont forget after completing save the data. after competing modification then select psa right click select- start update immediatly......
    thanks
    ram

  • How to edit/share documents between iMac and iPad

    I would like to edit documents on my iPad and have those changes appear on my iMac and vice versa.
    I was hoping to use Office2 HD and Dropbox, but it seems that documents can't be saved back to Dropbox on the iPad. Everytime I try and save in Office2 HD I get a "this folder is read-ony" error.
    Is this a problem with Dropbox or is it a problem with Office2 HD?
    What work flow would people recommend? I was hoping to not have to buy the whole iWorks for both my iMac and iPad. I don't do that much of this kind of stuff and was hoping for a cheaper solution.

    Thanks Angelus angel.
    I think I worked out my problem. Because of the way the iPad deals with security you can't open a document directly from the Dropbox app into another app and then save it back.
    Instead I had to setup my Dropbox details in Office2 itself. Now it works great!

  • How to Edit Word and Excel file in N9

    Hi, I can open the Ms Word and Ms Excel Files in N9 but I can not edit the text or Cells. Please advise the way to edit the text in the Word or Excel Files.

    Apparently, Nokia considers it to be strange that someone want to edit documents on smartphone, and considering that most of the developers (who are able to produce office software) are not interested in MeeGo, we will not have this option available. 

  • How to edit HDV and HD 24F together?

    Please help! I just did a 2-camera shoot, on Canon HV 40s. The problem is that my partner and I were in two different recording modes: HDV and HD 24f.
    I am new to HD, and really don't know much about it. What is the difference between the two modes, and will it affect the look of my project when I edit footage together from the two modes?

    I'd suggest using Streamclip to converty the 24F footage to the specs of the HDV camera footage.
    I'm not a Canon user but I think 24F is 24 progressive.
    FCE does not work directly with 24 fps.
    Al

  • How to edit tracks and disc number?

    I have the iPod Classic 160GB, and I have a Windows 7 desktop PC which has the latest version of iTunes. I am not sure what is the latest, but I always have it up to date.
    I have a lot of playlists for my iPod, and I have it labeled by the albums, so in that particular playlist are my songs. Some are multi disc meaning some are two, or more, or some are a complete box set. I know for a fact I'm not doing this right. In my playlist, I drag over every disc of that album, and track numbers, and disc numbers are one big line of songs. Pretty much I would like to group my disc 1 together, and when all tracks play of disc 1 then it plays the next disc, and so on. Could someone please explain how in steps?
    Thank you,

    I have to sleep... I live in the UK. Your last two posts were at 02:16 and 05:59 respectively. Like anyone else helping out here I'm doing so in my spare time. And you should have all the information by now... For a multi-disc CD give each disc the correct disc number, then give each disc the same album name. If you choose the right column to sort on (Album) the CDs are listed in order with the tracks listed in order within each CD.
    In the screenshot you posted you should enable the Track # and Album Artist columns so you can see clearly what is going on.
    In fact for a fuller picture, turn on the columns for Track #, Disk #, Album, Sort Album, Artist, Sort Artist, Album Artist and Sort Album Artist so you can see all the factors influencing the sort.
    If you sort on the Album column, set to read Album by Artist, then sorting is controlled by the first non-empty value from the following fields: Sort Album Artist, Album Artist, Sort Artist, Artist, then by Sort Album or Album, then Disk #, then Track #.
    tt2

  • How to edit books and pdf in ibooks for mac ?

    trying to edit the metadata for books and pdfs in the iBooks for mac app and it doesnt seem possible.. the "get info" window is non existant to make changes..
    anyone with any suggestions or methods to edit ? or is this something the engineers left out  

    for a longer, more complete discussion about this, please check this discussion:
    https://discussions.apple.com/thread/5468680?tstart=0
    I have forwarded an enhancement request to add this feature in iBooks for Mac. The more providing this feedback, the higher this might get on the priority to solve. Please fill in your remarks and suggestion via http://www.apple.com/feedback/ibooks.html

  • How to edit width and spacing of bars in Numbers?

    I have a graph with 4 bars, each in a different series/set so I could edit the standard deviations separately, but they're spaced far apart and the bars are really narrow. I put the gaps between columns and sets at 0% and that didn't do much. Any way to manually widen the bars and/or move them closer together?

    When I have each of the values in the same series and go to use Custom Error Values, I am only able to set one standard deviation for all of the bars, instead of one for each. That gave me this:
    As I mentioned in the first post, I manipulated both the gaps between columns and sets, which only let me get the bars this wide and this close together:
    This issue is something I've searched extensively, and I think the lack of customization ability might just be an error in the program itself and might not be something they offer (but should).

  • How to edit ABOUT and HELP contents after app build operation?

    I hope people can read the HELP contents and ABOUT information from the program after I build the VI into an exe file or an install file. I don't know where to edit those informations. Thanks!

    After you build a VI into an application, (.exe) nothing in it can be changed since any changes would require the application to be recompiled, and that requires the LabVIEW development environment.
    On a Windows PC, the "Help" file is external to the application, so you could setup in the VI Proerties > Documentation the link to the exteranl Help file, then edit that file whenever you need to. This path would have to setup before you build the .exe and would not be able to be changed.
    You could use a similar approach for an "About" screen. Make a sub-vi for the About screen, and have the application builder set to "Small target file with exteranl file for suVIs" under the Build Options. This will create two files for your built application. An .exe th
    at is your top level VI, and an .llb that contains all your subVIs. When you need to change the About info, you would just need to modify your original About dialog, then copy it into the .llb of the built application overwritting the original one.
    If this is not what you are asking, please provide some more detail.
    Ed
    Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
    Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

  • How to edit bmp and other graphic files

    I need to edit bmp file by erasing some text or part of the graphic from it. Is it possible to do? In other words what is the analog of Windows paint brush application in Mac OS?

    OS X does not come with a paint program, but you can find them at VersionTracker or MacUpdate. For image editing consider GraphicConverter.

  • HT1631 How  can I share and sync passwords between  iMac and iPad

    I'm in password ****!!!!  My memory is not what I once was and managing passwords on my iMac and iPad is making me crazy.  The iMac is the home planet at work for the iPad and it use it all day... the iPad is my device of choice when at home. 
    The value of a strong password cannot be understated in these times!!!!
    Is there an easy way to sync passwords between the two.  I find I spend way to much time  resetting passwords because I simply cannot remember them.
    Again... and again... and again... is the story of my life.
    Help
    mike

    The following may help:
    If you are using Safari on both devices and you have iOS 7.0.3 or later on the iPad and OS X Mavericks 10.9 or later on the Mac, iCloud Keychain may be what you want: iCloud: Frequently asked questions about iCloud Keychain
    There are other options available with 3rd party software. Two popular ones are https://lastpass.com and https://agilebits.com/onepassword

  • How do you share and view multi article folios on any desktop computer without DPS?

    How can one view a multi article folio on a desktop computer, mac or pc, using the Adobe Content Viewer?
    I need this for desktop sharing purposes, for people without DPS of any other Adobe software installed (except for probably Content Viewer).
    It`s an interactive brochure that needs to be spread among a number of people. Some use mobile devices, but others use Desktop computers.
    Thank you.

    DPS is essentially a mobile publishing platform.
    The only desktop ACV that is available is for Windows 8.1. Otherwise these
    folks need tablets.

Maybe you are looking for