How to edit sound in flash

How do i fade out a sound clip in flash without useing any
outside programs?

fks1989,
> How do i fade out a sound clip in flash without
> useing any outside programs?
Drag a sound to the Stage. You'll see it appear in a
keyframe. Click
inside that keyframe and look to the Property inspector.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Similar Messages

HOW TURN ON SOUND IN FLASH?

HOW TURN ON SOUND IN FLASH? It has worked OK for a long time until yesterday. I reinstalled Flash and sound was then OK. Today it was out again so I reinstalled Flash once again but this time sound is not restored. This is the latest version on WinXP and Firefox 22.0
...PLEASE REMOVE THIS QUESTION. The problem was faulty wiring in the headset.
Message was edited by: enablescreenname

fks1989,
> How do i fade out a sound clip in flash without
> useing any outside programs?
Drag a sound to the Stage. You'll see it appear in a
keyframe. Click
inside that keyframe and look to the Property inspector.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

How to edit vector in Flash?

I've imported a vector graphic from AI into my stage. When I click on the vector graphic that's been converted to movie clip symbol and drill down to the vector level, as soon as I insert a keyframe in the timeline, I no longer can use an eraser to edit the vector graphic. It automatically move up one level as soon as I insert a keyframe. Does anyone have any idea why I'm getting this behavior? I want to create a hand written effect with this vector grachic. This is frustrating. It's not behaving like it suppose to be. If I draw a vector square on the stage, convert to movie cli, double double click the movie and then I am able to edit or change the vector shap but that's not the case with the imported AI file.

Okay, I've noticed something. Whenever I import an AI file into Flahs, parts of the vector graphic has turned into bitmaps <Mesh> and so; therefore, I can longer edit it in Flash. Any reason why this is happen? Arent vector graphic suppose to maintain its vector property?

How do i edit sound in flash?????

I have a sound file that is longer than my movie, how do i
make the sound fade out at the end of my movie without using any
programs besides flash???

fks1989,
> I have a sound file that is longer than my movie, how do
i
> make the sound fade out at the end of my movie without
> using any programs besides flash???
You just asked an almost identical question about an hour
ago (which I
answered). While you're waiting for replies, I recommend --
and I recommend
with a friendly WHACK! -- that you open the documentation and
read up a bit
on the topics you're asking about.
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

How to Edit a Missing Flash Image?

I was given a flash project to edit. I have to edit one image in Photoshop, but when I right click on it and choose Edit with - Photoshop, an error message comes up saying "The file G:Web-02\Site\film120902.gif does not exist, unable to launch external editor". I don't understand how Flash can list the image and display the image when I click on it, yet it doesn't exist. I tried to copy the image and paste it in photoshop but it only pastes a very low resolution version of it. What do I do?

Think of your Flash doc as sort of a table of contents.... listing all the stuff that is (suppose to be) in the book. It does not become a .swf until it is "Published" or "Control/Enter" to create a .swf.
But nobody knows if one or more of the pages have been ripped out.
So if you cannot edit that image because it no longer exists, see if there is a version of the .swf or Web page that actually displays the image in the size you need. Then "Print Screen", open PS, File, New, Edit, Paste...there is a screen capture.. crop out what you need and edit from there.
Best of luck,
Adninjastrator

How to edit sounds in iTunes songs on GB?

Hello, I'm trying to figure out how I can change the sound of my itune songs in my garage band.
I already know how to place the Itune tracks into my gragband, but I would love to know how to add bass onto some of my songs?
Change the equalizer? and etc? I want my songs to have more of a deep echo type sort of sound but don't know how? How to change the volumes for each song? I hope you understand what i'm saying and highly aprreciate your help.

I Have found out (by myself) -___- To do what I was looking for, All I simply had to do was click on Master track, then edit and from there I could choose the adjustments I wanted to make for my songs. Such as bass reducing, Echo, Reverb and other track affects. Thanks for nothing I guess.

How to edit F4V from Flash Media Server?

I'm using FMS 4.5 to record a live stream from a webcam. Because of the poor quality when also recording audio on the same stream, I have to use two. So, I end up with two .f4v files - one with the video, and one with the audio. I need to then combine them into a proper video. However I cannot import these files into Premiere - which is quite goofy. Anyone know how to manage this?

Well, there is definitely something weird with the file. I couldn't find what, though.
What worked was converting to MP4 using the following:
http://www.videohelp.com/tools/XviD4PSP

How to Edit PSD Files In Flash Template

Hi Everyone,
I am new to flash and I am trying to create my first flash site using a template that I have downloaded. I can edit the first page fine, but when I click the "about us" or any other section, the standard template text, Which isn't even in english, appears. I believe that these are psd files, and I have tried to edit them, saved and replaced file on my computer, but still I get the same unchanged text on this site when I preview. Could someone please tell me how to edit and replace these files within the flash movie?

Instance names are the reference names that you give to the individual items on the stage. Only movieClip and button symbols can have instance names.
When you import a photoshop file to Flash you will get individual bitmap objects on the stage and in a folder in the movie's Library. You will need to select each item, one at a time, on the stage and convert each one to a symbol. When you make that conversion the name that you give to that new movieClip or button is the name that you will see in the Library.
When you select that new symbol on the stage, look at the Properties window. You will now see a space at the top where you can give that item an instance name. The instance name is what you will use in Actionscript to control that object on the stage.
When you look in the movie's Library, you will see the original bitmap and the symbol that you created that contains that bitmap.
Does that help?

How to Edit Flash Symbol in Photoshop?

In Flash CS4, I have a graphic of a long filmstrip with 24 pix in it. I need to edit the symbol in photoshop (to put all new pix in), and then replace the current filmstrip with the new filmstrip. How? This is CS4, not CS5.

Add an image to a folder with your fla, image folder(with image inside) and then re import image to stage again then try 'EDIT' the file!
Date: Sat, 24 Sep 2011 13:31:35 -0600
From: [email protected]
To: [email protected]
Subject: How to Edit Flash Symbol in Photoshop?
    Re: How to Edit Flash Symbol in Photoshop?
    created by sneedbreedley in Flash Pro - General - View the full discussion
Whe nI double click on the image, a Bitmap Properties window opens with no option to edit. When I right-clcik on the image and select Edit With and choose photoshop, an error message appears saying The file G:\web-02\Site\film120902.gif does not exist, uable to launch external editor.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3936238#3936238
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3936238#3936238. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Flash Pro - General by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How to edit bitmap which is imported in flash using xml and save the edited bitmap back to xml in flash.

hi all
It would be appreciated if any one let me know how to edit
bitmap which is imported in flash using xml and save the edited
bitmap back to xml in flash.
Is it posible to save the bitmap data in flash?
thanks in advance

Yes you can... but like I said before you need to upload the
data from the changes you make to a server.
In terms of the solution... its unlikely that you'll find one
specifically for your needs. You will have to learn whatever you
don't know how already and maybe adapt some existing examples to
your needs.
To change the visual state of a movie clip... you just do all
the regular things that you want to do to it using flash... scale,
rotation, drawing API , textfields etc in actionscript. If you
don't know how to how to do that stuff, then you need to learn that
first. That's basic actionscript.
You can capture the visual state of a movieclip using the
BitmapData class. That includes a loaded jpeg. You can also
manipulate bimatp data using the same class. You should read up on
that if you don't know how to use it or check out the examples
below for uploading info.
For uploading to the server:
Here's an as2 solution that took 15 secs to find using
google:
http://www.quasimondo.com/archives/000645.php
If you're using as3, google search for "jpeg encoder as3" and
look through that info. There are also historical answers in the
forums here related to this type of thing that might help as
well.

How to edit .FLV file in Flash?

Hi,
Can anybody giude me how to Edit .flv movie file in Flash
Professional 8 in MAC.
I can open the .flv file. I can see each frame.
Now when i select some frames from the starting movie &
cut(delete) those frames, I should get the remaining movie.
But i can still see the starting movie frames in my .flv
file.
I don't know how to select particular frames & cut those
frames.
Please reply if you know the answer.
I appreciate your support.
Thanks in advance.
- Nik

Now that I have downloaded the latest Flash software, I have no sound in Flash content. How to fix?

Now that I have downloaded the latest Flash software, I have no sound in Flash content. How to fix?

To give you any useful advice, I'm going to need to know more about your computer and browser:
https://forums.adobe.com/message/5249945#5249945

New edition of adobe flash player will not load on samsung tablet. how do i load an older version?

newest edition of adobe flash player will not install on samsung tablet. how do i download an older version like 10.3?

This might help - How do I manually install Flash Player on my Android device?

How do i actionscript my flash button to play the sound while being transfered to another url?

Hi!
As the title says:
How do i get my flash button to play my sound when i click on
it while being transfered to another url?
I did get it to work, but only when i set the script to
"_BLANK". When i clicked the button then it played the sound and
opened the url in a new window. I want it to be in the same window
and still play the whole sound.
Now i get just 1 or 2 sec then when im transfered, it stops
playing the sound.
I hope this explains it..... if any typo....its because im
Swedish =)
Thanks in advance!

If you are jumping to another URL using the same window you
cannot have a sound start on the press of a button and that sound
to continue on.
Reason
You are removing all trace of the sound and the swf that
contains that sound file.
Work arounds
1.Take a look at "frames". This way you are keeping the
container page and opening another page inside of that page.
2. Div's. again you are importing a page into a particular
area yet keeping the swf, with the sound playing, in the parent
frame.

How to Edit Audio Properly

Hi, I am trying to figure out how to trim /fade my sounds in Flash CS5 but it is a nightmare. So at frame 800 I want to start to fade the sound from 100% to 0% on frame 850, but whatever I try it just get's mucked up. Those little handles just keep duplicating when I try and drag them. Is there any way to delete the points and how do I get the left and right to be identical.
Also, how do I fade the sound? I mean what is the best way to fade the sound so at frame 800 the sound starts to fade from 100% to 0% on frame 850?

Instead of beating yourself up trying to edit the sound in Flash, why not use a real audio editor like Audacity:
http://audacity.sourceforge.net/
using your Flash doc frame rate and the time of the audio file, you could determine exactly where to start and end the fade using time in Audacity instead of frames in Flash.
Very easy and quick!
Best wishes,
Adninjastrator

How to edit sound in flash

Similar Messages

Maybe you are looking for