How to edit Table RSR_PREC_TIMEOUT

Hello guys,
we are using broadcaster and want to set a timeout for workbook calculation. To do this SAP recommends to enter workbook ID and the Timeout time in minutes into table RSR_PREC_TIMEOUT. In se16 i can do this to enter a value. But in Acceptance and production i cannot edit this table via se16. There are no entries for this table in acceptence and production. I wanted to transport the enry to the other systems but it does not allow me to write the entry to a transport request because the field Workbook ID is a key field but also if you leave it blank it serves like a wildcart. The timeout belongs to every workbook precalculated. And this entry i want to have also in the other systems. I can't transport it on a transport request because it says key field is missing. But it should be blank.
Can anyone help me? Does amyone dealt with this before?
Any help appreciated.
Thanks and kind regards,
Murat

Hi ItellBasis,
you can use Data Browser se 16 and create an entry or transaction rsprecalcadmin there is one tab also for this. Assign points if it helps.
Thanks,
murat

Similar Messages

How to edit table frame style

I would like to know how to edit table style in front panel. For the example shown below, I would like to remove the gray color overcast frame.
I couldn't find the table style editor.
Solved!
Go to Solution.

Try using decoration frames. Find the attached vi too
Attachments:
frame.vi ‏6 KB

Oracle 10g HTMLDB,.. How to EDIT TABLEs

Hi,
I am new to DBs. I am doing a class project on Oracle 10g HTML DB. I have created the ER Diagram but am having problems implementing it in Oracle.
Here are the problems:
1) Editing tables
Currently I am using the wizard the make the tables:
Workspace AMANSOOR>SQL Workshop>Create Table
Now the table is created, the primary key is set, but then lets say that
a) I have to go back and edit the table, perhaps add a cloumn etc, how do i do that.
b) More over if I have to add a new CONSTRAINT, or TRIGGER, where do i do that,..
I would really appreciate any help,..
Thank you,..

Never mind,.. i got the answer,..

How to create an editable table in ADF 10g??

Hi,
I want to create a editable table using the Jdev 10g.. so that i can do read and write on the table. Can anyone tell me how i can create it...
thanks in advance

Hi,
using ADF BC and ADF, one of the options when dragging a ViewObject from the data control palette is ADF Table. This creates an updateable table
Frank

How to edit a particular row in the table ctrl when a push button is clickd

Hi Experts,
How to edit a particular row (except the Primary keys) after selecting it in the TABLE CONTROL when a
push button is clicked in the table control.
For Eg. If you have a push button say "Modify", the particular row what we select in the table control should be in a
editable mode after clicking "Modify" Push button.
Please help me out.
Thanks in advance.

Hey Ram,
Thanks a ton.
Its working fine...sorry for the late reply.
The reason behind the delay is because i had modified my code as per your logic it worked fine but the thing is that the whole column was in editable mode but not a single row.
For E.g If i want to edit a particular row, first i select the row and then click on "Modify" button. After i click on the button, the whole column gets in a editable mode including the one which i intentionally selected.
Here, the solution is that you have to set a flag in PBO so that once it is done with PBO then it need not come back again after we click on "Modify" button.
And one more query is that after you modify a particular row in the table control ( When it is in editable mode) and click on the "Save" button, it is not getting updated to database.
To update the database, we need to select the row once again after modifying it and click on the "Save" button.
Here, database is updating only when it is selected again. If it is not selected, it is not getting updated.
If you have any alternative solution, then please help me out.( I hope i am clear with the question.)
Thanks,
Ananth.

How to make editable Table in LabVIEW

Hi,
Could you please let me know how can I make an editable table. I read all the contents of the table from a spreadsheet file but I would like when I click on any of the entries in the first column I get checkboxs for all the entries in that row and after updating them the table should also automatically be updated with new values
For example
Let's say this is my table
Device Name Bit 0 Bit 1 Bit 2 Bit 3 Value in binary
1 1.bit0 1.bit1 1.bit2 1.bit3 0000
2 2.bit0 2.bit1 2.bit2 2.bit3 0000
3 3.bit0 3.bit1 3.bit2 3.bit3 0000
4 4.bit0 4.bit1 4.bit2 4.bit3 0000
Now if the user click on 1, I should see 4 check boxes for 1bit0 1.bit1 1.bit2 1.bit3 and as soon as the user update any of them the binary value should be updates . For example if the user enable 1.bit1 and 1.bit 3 then the binary value should become 0101
Could you please let me know if I can I use Table control to do this and how can I do it in LabVIEW
Thanks

altenbach wrote:
Why does the user even need to select a row first? Wouldnt it be sufficient to have an array of clusters, where each cluster contains a devicename string, four enums with 0,1, and a string for the value (or binary formatted numeric). Elements that don't accept inputs should be disabled, but not greyed and can be recalculated whenever needed.
The main problem is the cosmetic fact that this will no longer resemble a table because of all the extra borders...
... That's why we have this idea! Go vote for it!! Thanks!
Here's what I had in mind (LabVIEW 8.2). All you need to add is parsing your input file into the cluster structure. If the number of clusters is large, show the vertical scrollbar of the array.
(...note that it would look much better with my above mentioned idea implemeneted! )
LabVIEW Champion . Do more with less code and in less time .
Attachments:
updateBits.png ‏24 KB
UpdateBits.vi ‏16 KB

How to make table as "editable false"

Dear Forum,
i am user of jDeveloper jClient/Swing .jpr.
cutomer table having following attributes-
1.cust_id (primary key)
2.cust_name
3.cust_add
Suppose customerview bind with jTable1.
Using ViewObjectEditor, i set "updateable never" for all fields.
This show error, when data insert into table " cust_id as
read only".
Help me, Using jClient Binding how to make Table as "editable false".

Overriding method prepareEditor() for new table:
private JTable tableList = new JTable(){
public Component prepareEditor(TableCellEditor editor, int row, int column) {
// 1 and 2 column is not editable
if(column == 0 || column == 1){ return null; }
return super.prepareEditor(editor, row, column);

HOW TO MAKE TABLE CONTROL NON EDITABLE

hi all
how to make table control non editable
Thanks & Regards
harsha

Hi,
Try this code in the PBO inside the module in the LOOP...ENDLOOP.
   IF SY-TCODE EQ 'ZEMPLDISPLAY'.
    LOOP AT SCREEN.
     if screen-name eq 'column1' or screen-name eq 'column2'. "Give the names of the columns in the table control
      SCREEN-INPUT = '0'.
      MODIFY SCREEN.
    endif.
    ENDLOOP.
ENDIF.
Or you can go the Layout of the table control in Change mode and for every column's attributes, make it 'Output' only field. Check 'Output only' field.

How to display table in editable mode

hi all,
I have displayed data using table wizard.Now i want to perform insert and delete row operations in table.but its displaying table in non-editable mode.
can anyone tell me, what should i do to display it in editable mode.
Thanks.

Hi Swati,
Please refer the link,
How to display Table Control in Active mode
Regards,
Hema.
Reward points if it is useful.

How to create editable table with one empty row ?

I'm looking for solution how to create editable table with one empty row using ADF BC. I have seen this solution in application that was created in JHeadstart and it's very well idea to use it insead of creation form.

hammm, i do it this:
drop the VO on the page, select Table->ADF Table....
so, drop the botton create, from de VO->operations->create (the firts), and right botton (mouse) Edit binding....
in Data collection select the VO, in Select an action select CreateInsert
luck

How to edit planning table so that only promote option comes for user

how to edit planning table so that only promote option not aproove, comes for user for process management in planning unit state first pass.
i am using 11.1.1.3 planing version, i have to do this customization very urgently.
guys pls give some clue...thanks in advance!

Hi John,
a lot of thanks for your valuable help on this forum.
if u see first pass state options, it gives only two options(promote,approve) but for other states it give >2 options so they must have put some condition on first pass state by restricting it to two options only.
do u have any idea in which table this condition has been put so that i can restrict it further to 1 option only.
thanks.

How to edit one particular entry in custom database table

Hi all,
I want edit one particular entry in custom database table with or without a program.
1.   I tried using SE16N and &SAP_EDIT but im unable to get entries to edit.
2.   I tried using '/h' and 'code = edit' but it is prompting me to delete an entry but not edit.
3.   I tried using modify statement. But in vain.
I tried this statements through programatically,
                        MODIFY itab FROM wa_itab TRANSPORTING zabc.
                        MODIFY zsample_02 FROM itab.
please suggest with out writing a program, if possible.

Hi ,
Try with FM SE16N_INTERFACE.
1 .Go to SE37
2. Enter FM SE16N_INTERFACE and execute
3. Give table name in Itab,
I_EDIT                  =
X
I_SAPEDIT             =
X
4. Press F8
5. Edit table entries and save.
Thanks

ADF Master Form / Detail editable table : how to update the table ?

Hello,
I'm using ADF faces with entity objects.
Here is a simple explanation of the model :
Table DOCUMENT --> Table LINEA DOCUMENT can have 0 or several row in the LINE table. Model is quite simple.
I'd like to create JSF pages to create and update DOCUMENT/LINE items.
I began with the Edit one :
In my DataControls I have something like :
AllDocuments
|
+- Id
|
+- Name
|
+-> AllDocumentLines
      |
      +- IdLine
      |
      +- ValueI created a form with the "AllDocuments" items having navigation and submit button.
I created an editable table with "AllDocumentLines" items.
The values are correctly filled.
My questions are :
- Which kind of "button" I have to add at the end of each row of the table to :
* validate the update if "Value" changes ? I tried to drag/drop the related Create button but it stays disabled.
* delete the row
- Which button can I put to "Add" a new row ?
I searched the forum but can't find answers of my problem.
Edit: I'm using JDeveloper 11.1.1.3.0
Edited by: Christophe on Jul 2, 2010 5:12 PM

For creating a record drag the createInsert operation and for delete drag the delete operation - just make sure to drag the operation from the right VO in the data control palette.
The you can drag the commit and rollback operations from the AM level - and you can change the "Disabled" properties of the buttons to false.

How to add boolean ckeck box to adf editable table

I have ADF editable table
this table containt EmployeeName , EmployeeID , and EmployeeStatus
the status is (A,I) Active or Inactive
the field in the database is Varchar2(1)
i want to make check box to be checked when the emp is active and unchecked when the emp is inactive and the value is (A,I)

duplicate... answered [url http://forums.oracle.com/forums/thread.jspa?threadID=1056067]here

How to Edit information of existing vendors

Hi All,
How to edit the information of existing suppliers using Supplier Open Interface Import Program. This information is exists in PO_VENDORS table.
I have successfully imported new Supplier with Status = NEW and now I want to edit it.
Can anyone guide/help me ?
regards
Sanjay

Hi Vik & Terry,
Thanks for your update.
I want to update Vendor Heder Information , for example, Vendor Type or Bill To & Ship To Location, and Vendor Site Information , For Example, Vendor Address.
Such task should be accomplished only thru API , not thu Form.
If you have any idea, let me know.
regards
Sanjay

How to edit Table RSR_PREC_TIMEOUT

Similar Messages

Maybe you are looking for