How to edit the application : tc~sec~ume~wd~enduser/LogonHelpApp

Hi
How to edit this application?
When the end users use this application they are not returning back to the logon page of the portal - but to the zdsfdasf/index.html og the J2EE - which may result in confused end users.
Anyway - how to change the redirect when selecting the Submit or Cancel button?
Earlier you could used the com.sap.portal.runtime.logon.par file and make changes, upload it and change the autscheme.xml to use your custimized application - that does not work from SAP EP 7.0 SP11

I've the same issue. I'm sure, there are many clients who updated it. Can somebody post a response on the above question. How to modify sap.com/tcsecumewdenduser/Logon web dynpro DC?
Thanks

Similar Messages

Dreamweaver and PhoneGap: How to Edit the Application Manifest for an Android app

I successfully created an Android app using dreamweaver cs6 and the PhoneGap build service. I submitted the app and it is live in Google Play. The only problem is that the app is requiring all kinds of permissions from users that are not necessary for the app. The app requires Internet access, but it does not require access to the camera or the user's contacts, etc. I understand that this information is held in the Application Manifest file, but I don't know where that file is.
Can you help me figure out how to edit the Application Manifest file for my android app?
Thanks,
Michael

To edit permissions, you do so in the config.xml file. After making changes, you can directly upload on build.phonegap.com or from within Dreamweaver.
See this page for info on customizing config.xml: https://build.phonegap.com/docs/config-xml#features

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

Hi, I followed the instructions to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple. How to track the application progress? Can someone help?

Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? Can someone help? < Edited by Host >
Thank you.
Best Regards,
Gerald

Hi Gerald
This is a user-to-user forum, and your message will not be received by Apple. You will need to sign into your Developer/MFI account, and contact Apple that way. This can be done here.
P.S Please do not post your e-mail address here.
Taylor

How to edit the include in the user-exit

hi experts,
how to edit the include in EXIT_SAPMM07R_001 fuction module exit.
when i am trying to edit the incude include zxmbcu08 .
it was giving the message" Program names ZX... are reserved for includes of exit function groups ". at status bar.
what is the way to edit include the fuction module above specified.
what is the issue !
please post ur reply as early as possible.
Thanks in Advance ..,
Regards,
Hitu

Hi,
Are you creating the include for the first time??
If you are modifying the include..Probably you have to use the modification assistant..
In the application toolbar...There are button for INSERT, REPLACE, DELETE..
Place the cursor on the code...Then press INSERT button..
It will open a block in that place..
Thanks,
Naren

How 2 Edit the DEFAULT&SMARTBAR ?

Hello
Pls i want 2 know :
How 2 Edit the DEFAULT&SMARTBAR ?!
To read Arabic Characters
Besides
How 2 change it's direction from left to the right ?
Regards
Abdetu...

i am sorry..
what i mean ; is there Docs i mean for the generated forms and obj liberies from designer...!
Besides OFGMNUT.*mmb* is a menu
i was doing the tool bar manually on a staked canvas
Well, but if i att OFGMNUT.*mmb* , it SHOULD be att 2 each form IN my application, afterwards
, i have 2 att the ( Main menu) to my main project form yeah ?!
Abdetu...!

Find out how many times the application was touched by a particular user

Hello,
can anyone please help me out with this issue.
I want to find out how many times the application was accessed by a particular user,their session IDs for each of the applications in a particular workspace. I am using a role based authorization scheme for my application. I am using Oracle APEX 3.2 version. Are their any underlying APEX tables/Views to find out the above details.
thanks,
Orton

Hi,
Have you check views APEX_WORKSPACE_ACCESS_LOG and APEX_WORKSPACE_ACTIVITY_LOG
Regards,
Jari
Edited by: jarola on Oct 20, 2010 7:37 AM
This might help also
http://download.oracle.com/docs/cd/E14373_01/appdev.32/e11838/advnc.htm#CHDDHGJI

How to edit the volume in a slide

Hello,
I don't know how to edit the audio volume in a slide.
I need low volume at the begining and increasing volume while the slide is on.
Can anybody tell me how to do it?
Thanks!

Hello,
Captivate allows some audio editing but for what you want to achieve you need a typical audio application like Audition or Soundbooth. Audacity (free) will do as well.
Lilybiri

How to edit the WSDL

I noticed a few limitations of an automatically generated web service
under WLS 7.0, and I am wondering if there is a way to manually edit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the names given
to the parameters in the EJB. I remember putting in a CR a while back,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to be able to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but could not
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

Indeed, you can do this. But if you have non-built in data types as paramaters
it gets pretty tricky.
manoj cheenath wrote:
You can change the parameter/operation name in the generated
WSDL file by editing the web-services.xml file in the web-inf dir
(inside the war file). This file is generated by servicegen, but can
replaced before deploying the service.
regards,
-manoj
"Joop Kaashoek" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
Thanks very much for your help, I have sent a request to '[email protected]'.
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
I see. No, I don't work in "development" or have any knowledge of what
features are
going to be in the product. I work in the "services" (i.e. professionalservices)
division, which is primarily tasked with figuring out (and showingothers) how the
stuff works :-)
Individuals from "development" (i.e. product managers, developers,architects, etc.)
do monitor this newsgroup, so I think you should create another postthat has a subject
like "Need static or JSP-based WSDL added back to .war". The subject forthis current
post, sounded like you wanted to know how to edit the WSDL (which Ithink I answered
to your satisfaction), but it sounds like you really just want acapability that
was in WLS 6.1, back in WLS 7.0 :-)
I'm assuming that you already know that you can extract the "static"WSDL from the
client.jar and put it anywhere in the .war, you like. The context rootwill be the
name of the .war file, without the file extension. For instance, if your.war file
is hello.war, the context root will be hello. If you then put the"static" WSDL (which
you extracted from the client.jar), into the root directory for for thisWeb Application,
the URL to it would be something like:
http://localhost:7001/hello/HelloService.wsdl
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Your explanation makes sense, but the implementation does not make
sense
to me. This should
clearly be on the list of things to fix. Our partners use .NET or other
technologies, we
want to be able to publish a meaningful self-documented WSDL document(with
meaningful
parameter names and documentation) on our server, not as part of aweblogic-specific
Java
client jar.
Can you indicate whether this is being worked on?
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
The assumption here, is that the client will download your client.jar(or whatever
you named it in your <clientgen> Ant task), and use a file:// URL to
access
it (the
"persisted" WSDL file) from within this archive :-)
If you use the Web Services Technology Stack from BEA
(lib\webserviceclient.jar)
on the client-side, editing this file affects the construction of theSOAP message
that is sent to the Web service, which I'm assuming is hosted on an
instance
of WLS
7.0. The names for the input parameters (and return value), will be
set
to those
that you specified in this WSDL, which is one of the things you said
you
wanted to
be able to do.
If you don't use the Web Services Technology Stack from BEA on the
client-side,
there
is still a very high probability that the WSDL processor of the tool
you
use, will
use this WSDL to create the SOAP message sent to your web service,
which
again is
assumed to be hosted on an instance of WLS 7.0.
If you use the "dynamically generated" WSDL (as opposed to the one inthe client.jar),
you will get the "generic" parameter names specified in it. The
"dynamically
generated"
WSDL is accessed by concatenating "?WSDL" to the location attribute,
of
your <service>
element.
Make sense?
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Mike,
How can editing this client file make any difference to the web
service
itself?
Joop
Michael Wooten wrote:
Hi Joop,
The "persisted" WSDL file is in the .jar file, for the client ;-)
The name of this .jar file is set using either of the following:
1. The clientJarName attribute, of the <client> sub-element for
your
<servicegen>
task, or
2. The clientJar attribute, of the <clientgen> task.
The path leading to the .wsdl file, is determined by the value youassign
to the
packageName attribute (in either of the above tasks).
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
I noticed a few limitations of an automatically generated web
service
under WLS 7.0, and I am wondering if there is a way to manuallyedit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the namesgiven
to the parameters in the EJB. I remember putting in a CR a whileback,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to beable
to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but couldnot
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

How to run the application in weblogic

Hello!
I have deployed 1 application in Apache Tomcat , it is working fine. Now i want to deploy same application in Weblogic Server. I have already installed "Weblogic 9.1". Now i dont know how to do and what to do next.
I also dont know where to copy that application folder in weblogic, and how to run & deploy the application?
I have stuck over here.
Please if anybody knows how to run the application in weblogic, plz let me know.
I need your help.
Thank you.

hi,
have you gone through [this link.|http://e-docs.bea.com/wls/docs92/index.html]. i think it may help.

How to give the application server file path in the module pool programming

Hi,
     Could somebody help me how to provide the application server file path in module pool programming once the logo is uploaded to sap system.
For eg I have imported a logo name owens into sap system by using transaction se78; now I need to call the path in the below url,
if container2 is initial.
CREATE OBJECT CONTAINER2
EXPORTING
    CONTAINER_NAME              = 'PICTURE_CONTAINER2'.
CREATE OBJECT PICTURE2
EXPORTING
    PARENT = CONTAINER2.
CALL METHOD PICTURE2->SET_DISPLAY_MODE
EXPORTING
    DISPLAY_MODE = CL_GUI_PICTURE=>display_mode_fit_center
EXCEPTIONS
    ERROR        = 1.
CALL METHOD PICTURE2->LOAD_PICTURE_FROM_URL
EXPORTING
    URL    = " ? "
EXCEPTIONS
    ERROR = 1
    Others = 2.
endif.
Thanks in advance
Deepu

hi Deepu,
Use FM '/SAPDMC/LSM_F4_FRONTEND_FILE' for fetching the data from the application server path/presentation server path
Regards,
Santosh

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

How to Edit the CheckBox in Classic ALV GRID Display

Hi,
I want to Edit the checkbox in Grid Display.
I have one checkbox field in my internal Table,
Code Of the Program,
Data :
Begin of itab occurs 0,
CHK type C,
MATNR like MARA-MATNR,
end of itab.
Iam building the fieldcatelog using Merge Funcion module.
After that I am chaning the properties of the field
catelog like below,
loop at I_FCAT assigning <FCAT>.
Case <FCAT>-Fieldname
When 'CHK'.
<FCAT>-Checkbox = 'X'.
<FCAT>-INPUT = 'X'.
I dont have edit option in fieldcatelog.
modify I_FCAT from <FCAT>.
endcase.
endloop.
In the Layout,
I_LAYOUT-box_fieldname = 'CHK'.
I_LAYOUT-box_tabname = 'ITAB'.
It is displaying the Checkbox field.but I couldnt edit the checkBox.
I can able to edit in REUSE_ALV_LIST_DISPLAY.
But I have to use REUSE_ALV_GRID_DISPLAY.How to edit the checkbox.
Thanks in Advance,
Sumithra

Hi vasu,
The below procedure explains you to create a checkbox cloumn in the grid and allows you to edit i hope this will helps u.
The ALV Grid Control displays the cells of a column as checkboxes if the column is marked as a checkbox column in the field catalog.
     Add another field to the output table in which you want to display checkboxes
OR
     Define an existing field as a checkbox.
Procedure
1.     Add a field to your output table:
Data: gt_fieldcat type lvc_t_fcat.
Types: begin of gs_outtab.
Types: checkbox type c. "field for checkbox
Include structure <ABAP Dictionary structure> .
Types: end of gs_outtab.
Data: gt_outtab type gs_outtab occurs 0 with header line.
2 * Add an entry for the checkbox to the field catalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
* Essential: declare field as checkbox and
* mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
* do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
append ls_fcat to gt_fieldcat.
regards,
venu.

How to edit the application : tc~sec~ume~wd~enduser/LogonHelpApp

Similar Messages

Maybe you are looking for