How to edit the device profile

I need to edit it but I cannot find it.
Please help with how to edit it? Thanks!

Hi,
if necessary you can edit the properties directly in the file. Go to the MI installation folder, openthe settings folder and in there you will find the file MobileEngine.config. In there you can enter all properties you like.
Hope that helps!
Regards,
Oliver

Similar Messages

How to edit the defaul profiles in profile manager?

Hello:
I'm setting up Profile Manager for the first time, and I'd like to change some of the auto-generated content from the EVERYONE group.
Specifically, I would like to chnage the ports in the Mail.app container so that IMAP mail accesses port 993 (not 143). I would also like to provicde a third-party outbound mail server...
I can't seem to find how to edit these settings this anywhere, please help

I believe you are looking for Banner. This is shown below.
But now are you trying to craft a dynanic message based on each user? Of this is generic info?

How to edit the nbu file when the mobile device is...

How to edit the nbu file when the mobile device is not connected?
That software that is available in the nokia site “nokia phone browser” is not useful! Why?
It is not working unless the mobile device is connected (attached)
It is quite slow when editing the contacts! (attached)
Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
Is there some workaround in this regard?
Is there some software the can edit the nbu files?
Thank you for the help,
Best
Jamal
Attachments:
Clip_774.jpg ‏166 KB
Clip_775.jpg ‏127 KB
Clip_773.jpg ‏243 KB

when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
Merry Chrasmas too ;-)

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How to get the device token in windows phone 8 sliverlight application?

Hi,
I am developing a windows phone 8 silverlight application . For my application I want to add push notification service , for this service I have to call one web service in my app . This api requires device token , device id ..etc , I am able to get the all
the things except devicetoken .
How to get the device token of a device ?
any help?
Thanks...
Suresh.M

Most probably device token is the push channel url which is returned by MPNS when a request is made to it.
Step 3 here: Push notifications for Windows Phone 8
http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

How to Edit the CheckBox in Classic ALV GRID Display

Hi,
I want to Edit the checkbox in Grid Display.
I have one checkbox field in my internal Table,
Code Of the Program,
Data :
Begin of itab occurs 0,
CHK type C,
MATNR like MARA-MATNR,
end of itab.
Iam building the fieldcatelog using Merge Funcion module.
After that I am chaning the properties of the field
catelog like below,
loop at I_FCAT assigning <FCAT>.
Case <FCAT>-Fieldname
When 'CHK'.
<FCAT>-Checkbox = 'X'.
<FCAT>-INPUT = 'X'.
I dont have edit option in fieldcatelog.
modify I_FCAT from <FCAT>.
endcase.
endloop.
In the Layout,
I_LAYOUT-box_fieldname = 'CHK'.
I_LAYOUT-box_tabname = 'ITAB'.
It is displaying the Checkbox field.but I couldnt edit the checkBox.
I can able to edit in REUSE_ALV_LIST_DISPLAY.
But I have to use REUSE_ALV_GRID_DISPLAY.How to edit the checkbox.
Thanks in Advance,
Sumithra

Hi vasu,
The below procedure explains you to create a checkbox cloumn in the grid and allows you to edit i hope this will helps u.
The ALV Grid Control displays the cells of a column as checkboxes if the column is marked as a checkbox column in the field catalog.
     Add another field to the output table in which you want to display checkboxes
OR
     Define an existing field as a checkbox.
Procedure
1.     Add a field to your output table:
Data: gt_fieldcat type lvc_t_fcat.
Types: begin of gs_outtab.
Types: checkbox type c. "field for checkbox
Include structure <ABAP Dictionary structure> .
Types: end of gs_outtab.
Data: gt_outtab type gs_outtab occurs 0 with header line.
2 * Add an entry for the checkbox to the field catalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
* Essential: declare field as checkbox and
* mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
* do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
append ls_fcat to gt_fieldcat.
regards,
venu.

How to edit the properties.

I installed a tool in LiveCycle called "LiveCycle Workbench". I dont know how to edit the properties of Reader Extensions server and deselect [CommentsOnline] through Workbench. Please kindly advice me in detail with examples or samples.
Thanks,
Prabudass

This is the Help topic for the Apply Usage Rights operation that the Reader Extensions service provides:
http://livedocs.adobe.com/livecycle/es/wb_help/00000949.html
If you are new to LiveCycle, you should work through this tutorial to learn the basics:
http://livedocs.adobe.com/livecycle/es/wb_help/00000405.html
Scott

How to edit the list box items in labwindow/CVI?

how to edit the list box items in labwindow/CVI?

Listbox items cannot be edited directly in the control: what you can do is to select a line an, transfer its content to a textbox control, edit text there and move text back to the listbox control. Available interactions with the listbox control are listed in the help.
An alternative to it is to use a tree customized to appear like a listbox: tree item labels can be edited directly in the control, at least those in the base column of the tree. You can look at the example \samples\userint\treelist.cws that shows how a tree can be customized this way. I haven't opened it, but this old example too should show the ability to edit tree cells.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Hi gurus in ALV how to edit the fields on out put list

hi gurus in ALV how to edit the fields on out put list

hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display

How to edit the include in the user-exit

hi experts,
how to edit the include in EXIT_SAPMM07R_001 fuction module exit.
when i am trying to edit the incude include zxmbcu08 .
it was giving the message" Program names ZX... are reserved for includes of exit function groups ". at status bar.
what is the way to edit include the fuction module above specified.
what is the issue !
please post ur reply as early as possible.
Thanks in Advance ..,
Regards,
Hitu

Hi,
Are you creating the include for the first time??
If you are modifying the include..Probably you have to use the modification assistant..
In the application toolbar...There are button for INSERT, REPLACE, DELETE..
Place the cursor on the code...Then press INSERT button..
It will open a block in that place..
Thanks,
Naren

How to set the default profiles in pi i have a problem

hi friends
can any one give me the solulation for this problem
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException
Unable to read configuration data (ExchangeProfile/aii.properties)
Exception Details
Exception class: com.sap.aii.utilxi.prop.api.PropertiesException
Message
Unable to read configuration data (ExchangeProfile/aii.properties)
Stacktrace
Thrown:
MESSAGE ID: com.sap.aii.utilxi.prop.api.rb_all.NO_PROPERTIES
com.sap.aii.utilxi.prop.api.PropertiesException: Unable to read configuration data (ExchangeProfile/aii.properties)
     at com.sap.aii.utilxi.prop.api.PropertySourceFactory.initServerMode(PropertySourceFactory.java:202)
     at com.sap.aii.utilxi.misc.api.AIIProperties.initServerMode(AIIProperties.java:401)
     at com.sap.aii.ib.server.applcomp.StartupServerProperties.initPropertiesForServer(StartupServerProperties.java:95)
     at com.sap.aii.ibrep.server.applcomp.StartupCodeEntry.startup(StartupCodeEntry.java:152)
     at com.sap.aii.ib.core.applcomp.IStartupCodeEntry.startupIfNotAlreadyDone(IStartupCodeEntry.java:33)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponentImpl.startup(ExplicitApplicationComponentImpl.java:116)
     at com.sap.aii.ib.core.applcomp.ExplicitApplicationComponents.startup(ExplicitApplicationComponents.java:383)
     at com.sap.aii.ib.core.applcomp.ApplicationComponent.startup(ApplicationComponent.java:209)
     at jsp_Main1198312518875._jspService(jsp_Main1198312518875.java:21)
     at com.sap.engine.services.servlets_jsp.server.jsp.JspBase.service(JspBase.java:112)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:544)
     at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Error History, Build Info, Generic Application Info
plz help me i could not do any work
how to set the defult profiles
raja

Please look at this thread. This might resolve your problem.
Unable to read configuration data (ExchangeProfile/aii.properties)
-Pinkle

How to edit the device profile

Similar Messages

Maybe you are looking for