How to edit the shortcut to change tabs.

I am changing from Safari to Firefox, and I am used to the shortcut of (apple)+(shift)+(right) to change tabs.
I was looking for a way to change the default shortcut of (ctrl)+(tab) in firefox to the apple behavior.
Is there an easy addon/change so I can customize this behavior? Or will I have to look into writing/changing the basic code within firefox? If so, can anybody provide tips on how to do so?
thanks,
Kevin.

You might take a look at the Keyconfig extension to see whether it allows that: http://kb.mozillazine.org/Keyconfig_extension
If not, it is possible to dig into Firefox to hack this kind of setting, but such changes probably will not survive the next update. This thread discusses how you would do it: [https://support.mozilla.org/en-US/questions/926508 Making the Home/End keys work on Mac like they do on Windows/Linux].

Similar Messages

How to edit the url of sites in new tab page of firefox

If we open newtab in firefox 9 tabs are visible. How to edit the url address of the previously pinned tab.

I found solution for this problem.
1. Type ''about:config'' in firefox url and click enter.
2. An alert will be shown on click on "I'll be careful, I promise!" button.
3. Type ''browser.newtabpage.pinned'' in textbox and click enter.
4. Right click and select '''Modify''' option to edit the url address.
''I want to change this url address''
[{"url":"http://localhost:8080/Admin/login","title":null},]
After change the url address in firefox is
[{"url":"http://localhost:8080/Admin","title":"Admin"},]

I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edi

I can't change shortcuts editing the shortcut file in preferences (mac) with After Effects CC. I Edit the file, but when i open AE, it still the old same keys.
How to have this working? And why until now, we don't have a GUI for shortcuts?
I use the Apple Wireless Keyboard, and need to change the preview keys to a suitable ones, because this keyboard don't have the num pad.
Until CS6, i was using ? and Shift+?, in the place of some kind of Zoom.
But this time, i edit the file, in a sort of way i tried, and non of then change at all.
WE NEED A GUI in AE Preferences to CHANGE THE SHORTCUTS!
Thank You!

The best way to add a +1 would be for everyone to file a feature request. Those are officially tracked by Adobe (unlike this user-to-user forum) and the more people that ask for something, the more likely it is to be implemented.

How to see the MM invoice changes in sap?

Hi
How to see the MM invoice changes in sap ?

Dear Prashant,
When ever we perform LIV and is blocked for payment (due to price variance or other variance) is stored on table RBKP_BLOCKED
Now when we release it through t. Code MRBR that time its get deleted from RBKP_BLOCKED
So you can always track it :
Go to ->SE16 ->Enter table name CDHDR -.>Table contents (F7)
In the selection screen enter
OBJECTCLAS as INCOMINGINVOICE
OBJECTID as =Invoice no+year (e.g 51056066022011 where is 5105606602 invoice no 2011 is year)
TCODE as MRBR
->Execute
You will find the details when it was released Date ,Time, User ID etc
Edited by: redriver on Dec 26, 2011 2:23 PM

Hi gurus in ALV how to edit the fields on out put list

hi gurus in ALV how to edit the fields on out put list

hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display

How to edit the job name in SM37

Hi All,
I have job in SM37 with the mane ZBI_PROCESSING and the Job in Release status. Now I want to change the Job Name to Z_PROCESSING_SS. Please let me know how to edit the Job Name.
Regards,
Ravi

Hi Ravi,
In SM37 when you have the list of all jobs, right-clic on the job you want to rename, copy, enter the new name.
Then you can delete the first job. The copied one will then be executed.
Regards,
Fred

How 2 Edit the DEFAULT&SMARTBAR ?

Hello
Pls i want 2 know :
How 2 Edit the DEFAULT&SMARTBAR ?!
To read Arabic Characters
Besides
How 2 change it's direction from left to the right ?
Regards
Abdetu...

i am sorry..
what i mean ; is there Docs i mean for the generated forms and obj liberies from designer...!
Besides OFGMNUT.*mmb* is a menu
i was doing the tool bar manually on a staked canvas
Well, but if i att OFGMNUT.*mmb* , it SHOULD be att 2 each form IN my application, afterwards
, i have 2 att the ( Main menu) to my main project form yeah ?!
Abdetu...!

What is the role of Changing Tab infunction module se37

Hi. All,
Any body can help me that what is the role of changing tab in function module.
i am very confuse to take this. please tell me with code ( code implementation)
not only theritical.
Regards
Mohd
Moderator message: please search for information, these forums are no substitute for ABAP training.
Edited by: Thomas Zloch on Mar 1, 2012

SAP help portal
ht[http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/351ee6448c11d189420000e829fbbd/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/2d/351ee6448c11d189420000e829fbbd/frameset.htm]
Configuration for definition of formula parameter
Customizing > Quality Management > Quality Inspection > Results Recording > Define Parameters for Calculated Characteristics
As you know, you can assign the formula for inspection characteristic in inspection plan.
Regards
Luke

How to edit the WSDL

I noticed a few limitations of an automatically generated web service
under WLS 7.0, and I am wondering if there is a way to manually edit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the names given
to the parameters in the EJB. I remember putting in a CR a while back,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to be able to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but could not
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

Indeed, you can do this. But if you have non-built in data types as paramaters
it gets pretty tricky.
manoj cheenath wrote:
You can change the parameter/operation name in the generated
WSDL file by editing the web-services.xml file in the web-inf dir
(inside the war file). This file is generated by servicegen, but can
replaced before deploying the service.
regards,
-manoj
"Joop Kaashoek" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
Thanks very much for your help, I have sent a request to '[email protected]'.
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
I see. No, I don't work in "development" or have any knowledge of what
features are
going to be in the product. I work in the "services" (i.e. professionalservices)
division, which is primarily tasked with figuring out (and showingothers) how the
stuff works :-)
Individuals from "development" (i.e. product managers, developers,architects, etc.)
do monitor this newsgroup, so I think you should create another postthat has a subject
like "Need static or JSP-based WSDL added back to .war". The subject forthis current
post, sounded like you wanted to know how to edit the WSDL (which Ithink I answered
to your satisfaction), but it sounds like you really just want acapability that
was in WLS 6.1, back in WLS 7.0 :-)
I'm assuming that you already know that you can extract the "static"WSDL from the
client.jar and put it anywhere in the .war, you like. The context rootwill be the
name of the .war file, without the file extension. For instance, if your.war file
is hello.war, the context root will be hello. If you then put the"static" WSDL (which
you extracted from the client.jar), into the root directory for for thisWeb Application,
the URL to it would be something like:
http://localhost:7001/hello/HelloService.wsdl
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Your explanation makes sense, but the implementation does not make
sense
to me. This should
clearly be on the list of things to fix. Our partners use .NET or other
technologies, we
want to be able to publish a meaningful self-documented WSDL document(with
meaningful
parameter names and documentation) on our server, not as part of aweblogic-specific
Java
client jar.
Can you indicate whether this is being worked on?
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
The assumption here, is that the client will download your client.jar(or whatever
you named it in your <clientgen> Ant task), and use a file:// URL to
access
it (the
"persisted" WSDL file) from within this archive :-)
If you use the Web Services Technology Stack from BEA
(lib\webserviceclient.jar)
on the client-side, editing this file affects the construction of theSOAP message
that is sent to the Web service, which I'm assuming is hosted on an
instance
of WLS
7.0. The names for the input parameters (and return value), will be
set
to those
that you specified in this WSDL, which is one of the things you said
you
wanted to
be able to do.
If you don't use the Web Services Technology Stack from BEA on the
client-side,
there
is still a very high probability that the WSDL processor of the tool
you
use, will
use this WSDL to create the SOAP message sent to your web service,
which
again is
assumed to be hosted on an instance of WLS 7.0.
If you use the "dynamically generated" WSDL (as opposed to the one inthe client.jar),
you will get the "generic" parameter names specified in it. The
"dynamically
generated"
WSDL is accessed by concatenating "?WSDL" to the location attribute,
of
your <service>
element.
Make sense?
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Mike,
How can editing this client file make any difference to the web
service
itself?
Joop
Michael Wooten wrote:
Hi Joop,
The "persisted" WSDL file is in the .jar file, for the client ;-)
The name of this .jar file is set using either of the following:
1. The clientJarName attribute, of the <client> sub-element for
your
<servicegen>
task, or
2. The clientJar attribute, of the <clientgen> task.
The path leading to the .wsdl file, is determined by the value youassign
to the
packageName attribute (in either of the above tasks).
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
I noticed a few limitations of an automatically generated web
service
under WLS 7.0, and I am wondering if there is a way to manuallyedit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the namesgiven
to the parameters in the EJB. I remember putting in a CR a whileback,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to beable
to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but couldnot
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

Dreamweaver and PhoneGap: How to Edit the Application Manifest for an Android app

I successfully created an Android app using dreamweaver cs6 and the PhoneGap build service. I submitted the app and it is live in Google Play. The only problem is that the app is requiring all kinds of permissions from users that are not necessary for the app. The app requires Internet access, but it does not require access to the camera or the user's contacts, etc. I understand that this information is held in the Application Manifest file, but I don't know where that file is.
Can you help me figure out how to edit the Application Manifest file for my android app?
Thanks,
Michael

To edit permissions, you do so in the config.xml file. After making changes, you can directly upload on build.phonegap.com or from within Dreamweaver.
See this page for info on customizing config.xml: https://build.phonegap.com/docs/config-xml#features

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

Can I edit the rpt file & change the datasource before loading the report?

We are an ISV and our application has a lot of reports. Our reports use a SQL Server database as the data source and each SQL Server at our customer sites has a different name.
In our testing we have determined that ReportDocument.Load tries to connect to the SQL Server that is saved in the RPT. If it can't fine the SQL Server saved in the RPT the load take about 60 seconds while it is waiting for the SQL Server Connection to time out.
We are using the Visual Studio 2008 version of Crystal Reports. This did not seem to be a problem with VB6/CR8.5.
We would like to edit the RPT and change the data source to the appropriate SQL Server before we call ReportDocument.Load.
Is it possible to edit the rpt file and change the data source before loading the report?
Or is there some way to tell Crystal not to try connecting to the DB
during the report.load?
In our case we will NEVER use the data source that is saved in the RPT, we will always change the data source using ApplyLogOnInfo.
Thanks

HI Todd,
You Can Not edit the report document before ReportDocument.Load() because if you dont load the report then you dont have anything to Edit
But as far as changing the datasource is concerned you can change that at runtime.
For changing the datasource following code will help you if both databases have a same schema :
Code for changing the database
ConnectionInfo crConnectionInfo = new ConnectionInfo();
crConnectionInfo.ServerName = "SERVER";
crConnectionInfo.DatabaseName = "DATABASE";
crConnectionInfo.UserID = "USERID";
crConnectionInfo.Password = "PASSWORD";
// Loop through the ReportObjects in a report and find all the subreports
foreach(ReportObject crReportObject in crReportDocument.ReportDefinition.ReportObjects)
     // Check the kind of the ReportObject, if it is a subreport
     // proceed. If not skip.
     if(crReportObject.Kind == ReportObjectKind.SubreportObject)
          // Get the SubReport in the form of a ReportDocument
          string sSubreportName = ((SubreportObject)crReportObject).SubreportName;
          ReportDocument crSubReportDocument = crReportDocument.OpenSubreport(sSubreportName);
          // Use a loop to go through all the tables in the main report
          foreach(Table crTable in crSubReportDocument.Database.Tables)
// Get the TableLogOnInfo from the Table and then set the new
// ConnectionInfo values.
TableLogOnInfo crLogOnInfo = crTable.LogOnInfo;
crLogOnInfo.ConnectionInfo = crConnectionInfo;
// Apply the TableLogOnInfo
crTable.ApplyLogOnInfo(crLogOnInfo);
// Set the location of the database. This value will vary from database to
// database.
crTable.Location = "DATABASE.OWNER.TABLENAME" or crTable.Locations;
The sample for doing this is available on support site.
Thanks,
Prasad

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

How to edit the shortcut to change tabs.

Similar Messages

Maybe you are looking for