How to edit the starting time for clips in properties?
Hello there ,
I’m testing the CS5 Audition right now and find it great except for one thing:
In the properties for each clip there is a starting time. But it just can’t be edited!
I can change the starting time of the whole session – yes.
But not the ones of the individual clips. Only by moving them around and that is not very precise.
Is there a way to edit this starting times for the clips by typing in numbers?
Thank you :).
AAUser777 wrote:
But wasn't that easier before?
Do I have to save any time I make a change?
As far as I'm aware, you've always had to save changes to metadata to make them permanent!
One more please:
Can't I group Clips and move them together anymore?
One more thing please:
Many people say that CS5 is worse than 3.
Why are all those people bothered?
No you can't group clips in CS5.5. And the reason that a lot of people are bothered is - because you can't group clips in CS5.5.
There are a few other reasons cited too, but I think that the lack of clip grouping may be at the top of the list, judging from the number of comments about it. If you look around the forum you will find a lot of discussion about this.
Similar Messages
-
Does anyone know how to set the starting time for an audio book?
I am trying to restart a burn in iTunes that failed for an audiobook. I need to set the start time so it will not have to reburn the disks that were already completed. I cannot find out how to do that in version 11 if the book consists of more than one file. Anyone have an idea how to do this? Apple wants me to pay $20 for something that should be in the help menu.
UCCX 5.0(2)SR02 is the version
I attached a screenshot of what I am trying to use but I am not sure what to put as the value? I tried using "now" and "null" but no success. -
I want to creat a playlist of all the podcasts I have from a particular show, want to edit out the first minute on all to skip the intro. Do not want to edit over 200 podcast manually. Is there a solution?
View menu -> Show Status Bar
Then the total play time for any group of tracks you select in the Songs area, for any selected album or for any selected playlist will show at the bottom of the iTunes window as in previous versions.
The ability to open playlists in separate windows was for some unfathomable reason removed in iTunes 11. Whether it will ever come back none of us here can say, but you can express your need for that feature via Apple's feedback page:
http://www.apple.com/feedback/itunesapp.html
Regards. -
The start time for SAP service
Experts:
Sometimes I need to know the start time for SAP service at
the NT service panel.
However either the service panel or the event viewer does
not give the service start time.
Is there a file to check above info?
Thanks!Hi Jenna,
Windows Event Viewer will give you details on how long the service has been running since its startup.
A simple mathematical subraction can give you when the service was started.
Hope this is useful.
Regards,
Deepak Kori -
Editing the display time for grouped objects
Hello, I am having issues editing the display time for grouped items. I am using Captivate 7 and I love how now the grouped items only show as one item in the timeline because it reduces the number of rows visiblein the timeline for each object on a slide. However, now that the grouped objects no longer individually appear in the timeline, I can't make any display adjustments to the grouped objects as a whole.
Has anyone else had this issue and is there a work around? My main issue is that if I have to extend or shorten the audio for the slide, and I have assigned an advanced action to the grouped object, in order to adjust the grouped object to match the audio, I have to now ungroup, make the adjustment, regroup, then reset the advanced action using the new group name. It is frustrating and time consuming.To expand and view the grouped items on the timeline, you need to click the Arrow symbol next to the group name. Once you expand, you can select the individual object and adjust the timings.
Alternatively, you can select the individual object of the group on the slide and adjust the timings from the Timing accordion. You can do this without ungrouping.
Sreekanth -
Setting the starting time for multiple podcasts
How do I set starting time for a group of podcasts at the 30 second mark. Mostly the beginning are all repetitious which I heard before.
I know, I can do that individually by going to info and set the slider. But how can I do this collectively?I don't think you can do it on multiple files at once. Probably the easiest thing to do is to select the first one and change the setting. Before you close out of that window, copy your start time from the field and then click next at the bottom of the window and paste into that one and so on until you're done. It's not pretty, but the quickest way I know of to do it. Otherwise, you might Google Doug's Scripts and see if that site has a script that might do this.
-
How to increase the waiting time for response in Adapter Engine not in IE
Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true -
When will I receive my I phone 6 case which i ordered along with the I phone 6 ?As per the website it says October. How long is the wait time for the I phone 6 case?
While we have no idea within this Community Forum how long you would have to wait for your iPhone 6 Case, I can tell you that there would not be a "general" answer of value. Like any product that is available in different materials and colors, the inventory varies based on what you have specifically ordered. For example, I visited an Apple Store on the day after the iPhone 6 became available and was interested in the "Midnight Blue" Leather" Apple iPhone 6 Case. The store had plenty of all the other colors, but that specific case and color had sold out that morning.
-
How to improve the activation time for a standard DSO
Hi all,
I'm facing an issue related to the activation of a DSO. The SM37 log is as follows....
12:03:16 Job started
12:03:16 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
12:03:20 Attivazione is running: Data target ZFIZIASA, from 93,627 to 93,627
12:18:00 Overlapping check with archived data areas for InfoProvider ZFIZIASA
12:18:00 Data to be activated successfully checked against archiving objects
12:18:02 Status transition 2 / 2 to 7 / 7 completed successfully
12:18:13 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218130
12:18:19 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4IC45QJA588GKZ0M7JEJ3HCAR with ID 1218190
12:18:20 Parallel processes (for Attivazione); 000003
12:18:20 Timeout for parallel process (for Attivazione): 000300
12:18:20 Package size (for Attivazione): 020000
12:18:20 Task handling (for Attivazione): Processi batch
12:18:20 Server group (for Attivazione): Nessun gruppo di server config
12:18:20 Activation started (process is running under user BWREMOTE)
12:18:20 Not all data fields were updated in mode "overwrite"
12:18:20 Process started
12:18:20 Process completed
12:18:20 Activation ended
Please have a look into the bold 3rd & 4th line. I couldnt able to analyse where the issue is and what to do to minimize the time for activation.
It is very challenging, please reply!
Please help.
Thanks in adv.
AjayHi Kundan,
Thanks for the response!
Actually, I have two identical DSO, having all the char & KF same and feeding the data from same DS at the same time but the issue is...
1) For 1st DSO, Activation log....
01.07.2010 02:02:41 Job started
01.07.2010 02:02:41 Step 001 started (program RSPROCESS, variant &0000000006946, user ID BWREMOTE)
01.07.2010 02:02:46 Attivazione is running: Data target ZFIZIASA, from 93,751 to 93,751
01.07.2010 02:19:27 Overlapping check with archived data areas for InfoProvider ZFIZIASA
01.07.2010 02:19:27 Data to be activated successfully checked against archiving objects
01.07.2010 02:19:27 Status transition 2 / 2 to 7 / 7 completed successfully
01.07.2010 02:19:28 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICC6UMXYT00Z2DYOQV8QL8CJ with ID 021
01.07.2010 02:19:30 Parallel processes (for Attivazione); 000003
01.07.2010 02:19:30 Timeout for parallel process (for Attivazione): 000600
01.07.2010 02:19:30 Package size (for Attivazione): 020000
01.07.2010 02:19:30 Task handling (for Attivazione): Processi batch
01.07.2010 02:19:30 Server group (for Attivazione): Nessun gruppo di server config
01.07.2010 02:19:30 Activation started (process is running under user BWREMOTE)
01.07.2010 02:19:30 Not all data fields were updated in mode "overwrite"
01.07.2010 02:19:30 Activation ended
2) For 2nd DSO, the activation log is..
01.07.2010 02:01:13 Job started
01.07.2010 02:01:13 Step 001 started (program RSPROCESS, variant &0000000006947, user ID BWREMOTE)
01.07.2010 02:01:35 Attivazione is running: Data target ZFIGL_02, from 93,749 to 93,749
01.07.2010 02:01:43 Overlapping check with archived data areas for InfoProvider ZFIGL_02
01.07.2010 02:01:43 Data to be activated successfully checked against archiving objects
01.07.2010 02:01:53 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015300
01.07.2010 02:01:54 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015400
01.07.2010 02:01:56 Program RSBATCH_EXECUTE_PROZESS successfully scheduled as job BIBCTL_4ICCAR91ALHE1VHSB6GV9PAPV with ID 02015600
Now my client is asking to lower the activation time for 1st one as it is taking for 2nd one.
I'm toatally blank now that what & how to do it!
The volume of data ...
ZFIZIASA
Active table - Number of entries: 13.960.508
Change Log Table - Number of entries: 13.976.530
ZFIGL_02
Active Table - Number of entries: 21.923.947
Change Log table - Number of entries: 21.938.657
Thanks,
ajay
Edited by: sap.ajaykumar on Jul 6, 2010 1:47 PM -
How to Minimize the starting time of the application in iPhone?
Please anybody suggest, how can i reduce the starting time of a web application developed for iPhone?
Application is connecting to the web quickly in the Simulator, but it is connecting the web with some delay in the device.
I am using GPRS for the internet connection in device.
Any quick help regarding this will be very much helpful to us.
Thanks,
AdamDon't make the user wait while you're downloading data. Cache the data in a local file for fast startup, then use NSURConnection to download in the background, and update the UI when finished.
-
How to get the start time and date
Hi everyone! I have a question ,who will be glad to help me! Thanks in advance!
As we know ,when we finish the UUT test ,it generate report . The report format maybe like"SeqFileName_Report[Time][Date]_00001.xml"
My question is"how can I get the [Time] and [Date] in the test sequence"See this post.
How To Display Time Information in Report/Results?
http://forums.ni.com/t5/NI-TestStand/During-a-test-how-can-I-find-the-start-time-and-date-of-that/td...
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness -
How to find the Execution Time for Java Code?
* Hi everyone , i want to calculate the execution time for my process in java
* The following was the ouput for my coding,
O/P:-
This run took 0 Hours ;1.31 Minutes ;78.36 Seconds
*** In the above output , the output should come exactly what hours , minutes and seconds for my process,
but in my code the minutes are converted into seconds(It should not)...
* Here is my coding,
static long start_time;
public static void startTime()
start_time = System.currentTimeMillis();
public static void endTime()
DecimalFormat df = new DecimalFormat("##.##");
long end_time = System.currentTimeMillis();
float t = end_time - start_time;
float sec = t / 1000;
float min = 0, hr = 0;
if (sec > 60) {
min = sec / 60;
if (min > 60) {
hr = min / 60;
System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
}* How to Calcualte exact timing for my process....
* Thanks* Hi flounder, Is following code will wotk perfectly?
public static void endTime()
DecimalFormat df = new DecimalFormat("##.##");
long end_time = System.currentTimeMillis();
float t = end_time - start_time;
float sec = t / 1000;
float min = 0, hr = 0;
while(sec >= 60){
min++;
sec = sec -60;
if (min >= 60){
min = 0; //or min = min -60;
hr++;
System.out.println("This run took " + df.format(hr) + " Hours ;"+ df.format(min) + " Minutes ;" + df.format(sec) + " Seconds");
} -
Dreamweaver and PhoneGap: How to Edit the Application Manifest for an Android app
I successfully created an Android app using dreamweaver cs6 and the PhoneGap build service. I submitted the app and it is live in Google Play. The only problem is that the app is requiring all kinds of permissions from users that are not necessary for the app. The app requires Internet access, but it does not require access to the camera or the user's contacts, etc. I understand that this information is held in the Application Manifest file, but I don't know where that file is.
Can you help me figure out how to edit the Application Manifest file for my android app?
Thanks,
MichaelTo edit permissions, you do so in the config.xml file. After making changes, you can directly upload on build.phonegap.com or from within Dreamweaver.
See this page for info on customizing config.xml: https://build.phonegap.com/docs/config-xml#features -
Can we some how display the start time for meetings on the monthly calendar
I would like to be able to start times to apointments on the monthly calendar view and also be able to print it. Can this be done with i Cal? If not is there an add-in that will allow it?
iCal Preferences>General and check 'Show event times in month view'.
-
How to find the Response time for a particular Transaction
Hello Experts,
Am implementing a BAdI to achieve some customer enhancement for XD01 Transaction . I need to confirm to customer that after the implementation and before implementation what is the response time of the system
Response time BEFORE BAdI Implementation
Response time AFTER BAdI Implementation
Where can i get this.
Help me in this regard
Best Regards
SRiNiHello,
Within STAD, enter the time range that the user was executing the transaction within as well as the user name. The time field indicates the time when the transaction would have ended. STAD adds some extra time on using your time interval. Depending on how long the transaction ran, you can set the length you want it to display. This means that if it is set to 10, STAD will display statistical records from transactions that ended within that 10 minute period.
The selection screen also gives you a few options for display mode.
- Show all statistic records, sorted by star
This shows you all of the transaction steps, but they are not grouped in any way.
-Show all records, grouped by business transaction
This shows the transaction steps grouped by transaction ID (shown in the record as Trans. ID). The times are not cumulative. They are the times for each individual step.
-Show Business Transaction Tots
This shows the transaction steps grouped by transaction ID. However, instead of just listing them you can drill from the top level down. The top level will show you the overall response time, and as you drill down, you can get to the overall response time.
Note that you also need to add the user into the selection criteria. Everything else you can leave alone in this case.
Once you have the records displayed, you can double click them to get a detailed record. This will show you the following:
- Breakdown of response time (wait for work process, processing time, load time, generating time, roll time, DB time, enqueue time). This makes STAD a great place to start for performance analysis as you will then know whether you will need to look at SQL, processing, or any other component of response time first.
- Stats on the data selected within the execution
- Memory utilization of the transaction
- RFCs executed (including the calling time and remote execution time - very useful with performance analysis of interfaces)
- Much more.
As this chain of comments has previously indicated, you are best off using STAD if you want an accurate indication of response time. The ST12 (combines SE30 ABAP trace and ST05 SQL trace) trace times are less accurate that the values you get from ST12. I am not discounting the value of ST12 by any means. This is a very powerful tool to help you tune your transactions.
I hope this information is helpful!
Kind regards,
Geoff Irwin
Senior Support Consultant
SAP Active Global Support
Maybe you are looking for
-
Transferring music from your iPod to your iTunes programme
Is there anyway you can put the music you have on your iPod back onto your iTunes. I recently had to get my hard-drive replaced in my iMac and i was told i could put my music back on my library by pulling my iPod in but it's only asking me to transfe
-
HT3705 how i can solve format behind text troubleshoot?
when im goin to move a picture, i go to format objects, and then select layout, then i select behind text and press ok... and this message is pop up: "the serve application,souce file, or item cannot be found. make sure the application is properly in
-
Is anybody graded full feature film (2k or 4k)on color.How is the result?Is there will be a differnce if i use base light or lustre?Cause i am planning to use colr with a good colorist for my feature film.
-
Decimal Factors in Internal Order Report S_ALR_87012993
Hi, I need to add the decimal factor in the report to view the 2 digits after .full stop.I am able to do it in my User id.But how can i activate this for all users in the client place. Kindly advice me.. Thanks Supriya
-
Web service proxy generation validation failed - two declarations collision
Hi, I'm creating a JAX-WS web service proxy against a web service with very complex payload. When I point the wizard to the WSDL, during the analysis, it throws an error, Error creating model from wsdl "<mywsdl>": (Related to above error) This is the