How to Edit the subject of a form that is submitted to me via email?

Is there a way to Edit the subject of a form that is submitted to me via email?
Ex. I've created multiple forms in Dreamweaver. They are submitted to my email address without problem.
When I receive them, the default subject line in my email is "Form posted from Microsoft Internet Explorer"
I want each of my forms to have their own subject line.
Thanks

Hi
In your form to mail script insert the following just above the actual function to send the mail -
$optional_subject = $_POST['form_subject'];
and $optional_subject in your mail function just before the body info of your email.
Insert an hidden field in your form with the id "form_subject" and the value you wish.
PZ
www.pziecina.com

Similar Messages

How can I edit the Subject Line of an ongoing thread of emails?

Is there a way to edit the Subject of an email? At times the topic of conversation changes throughout an ongoing thread of emails, and I'd like to manage that by editing the Subject before filing it into a folder.

The problem with the add-on solution is it stops working every time there is a new Thunderbird release. Editing the subject line is a fundamental feature than should be built-in. How can you possibly file incoming messages if you can't give them a meaningful subject.
It is your data. It effects no one else.

How can I edit the Subject Line of an email I've received?

When the sender inserts vague or misleading text in the Subject Line (or leaves it blank), sometimes I'd like to edit it - makes organization and retrieval of information which might be in the email easier for me.
I've tried opening the email file with a text editor (TextWrangler) and editing the "Subject" line. That partially works: When the message is open for reading, my edited Subject appears near the top of the message.
However, when looking a list of emails in a Mailbox, Mail still displays the unedited Subject - which defeats my purpose.
What am I missing, here?
-gw

Hi Gary, I think Mail is using stored info, not sure which of these two hold that, but...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

Editing the subject line of a received email in Outlook 2010.

I'm not sure if this is intended or not, but a coworker of mine pointed this out to me. Are you supposed to be able to edit the subject line in an email that you receive from someone, BEFORE replying to it? For instance if you double click on an email to
view it in a separate window you can select the text in the subject field, edit it. and save it as the original.
Example here http://tinypic.com/r/2bdykh/7
In this example the subject line originally read "This is a test.". I've deleted "est." leaving what you see.
You can then save it so that it looks like the person who sent the message sent it to you with a completely different subject. (I can see where this could be used maliciously within the workplace or otherwise).
Just something i was curious about. Any thoughts?

Arjan is actually right. You can always edit the SUBJECT of a message.
It is just not so obvious how you have to do it - although Arjan described it.
This is because you first have to ENABLE editing of a message (email).
1) open one mail you want to change by double-clicking it
2) press the button which looks like a hyphan with a triangle under it in the top row on the right which opens a pull-down menu to access 'Customize Quick Access Toolbar'
3) choose 'More commands
4) customize the toolbar in the middle by 'choose commandos from': go to 'All Commands'
5) choose 'Edit message'
6) press the 'Add button' so that it gets added to the Quick Access Toolbar of an opened email / message
7) confirm by pressing 'ok'
If you now press the new (green) Edit Message button in the email you opened you can go to the subject line and change it to you needs, afterwards press the save-button
-> the email gets saved with the new subject
Once you enabled editing of an email you can easily do it for every mail without to running again through the whole procedure.
Thanks Arjan for the hint - I was already searching since long for a solution of this 'problem'. I use it to rename titles of emails which had either no subject, a wrong or misleading title. This helps me to find them easier back.

Hi gurus in ALV how to edit the fields on out put list

hi gurus in ALV how to edit the fields on out put list

hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display

How 2 Edit the DEFAULT&SMARTBAR ?

Hello
Pls i want 2 know :
How 2 Edit the DEFAULT&SMARTBAR ?!
To read Arabic Characters
Besides
How 2 change it's direction from left to the right ?
Regards
Abdetu...

i am sorry..
what i mean ; is there Docs i mean for the generated forms and obj liberies from designer...!
Besides OFGMNUT.*mmb* is a menu
i was doing the tool bar manually on a staked canvas
Well, but if i att OFGMNUT.*mmb* , it SHOULD be att 2 each form IN my application, afterwards
, i have 2 att the ( Main menu) to my main project form yeah ?!
Abdetu...!

How to edit the WSDL

I noticed a few limitations of an automatically generated web service
under WLS 7.0, and I am wondering if there is a way to manually edit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the names given
to the parameters in the EJB. I remember putting in a CR a while back,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to be able to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but could not
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

Indeed, you can do this. But if you have non-built in data types as paramaters
it gets pretty tricky.
manoj cheenath wrote:
You can change the parameter/operation name in the generated
WSDL file by editing the web-services.xml file in the web-inf dir
(inside the war file). This file is generated by servicegen, but can
replaced before deploying the service.
regards,
-manoj
"Joop Kaashoek" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
Thanks very much for your help, I have sent a request to '[email protected]'.
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
I see. No, I don't work in "development" or have any knowledge of what
features are
going to be in the product. I work in the "services" (i.e. professionalservices)
division, which is primarily tasked with figuring out (and showingothers) how the
stuff works :-)
Individuals from "development" (i.e. product managers, developers,architects, etc.)
do monitor this newsgroup, so I think you should create another postthat has a subject
like "Need static or JSP-based WSDL added back to .war". The subject forthis current
post, sounded like you wanted to know how to edit the WSDL (which Ithink I answered
to your satisfaction), but it sounds like you really just want acapability that
was in WLS 6.1, back in WLS 7.0 :-)
I'm assuming that you already know that you can extract the "static"WSDL from the
client.jar and put it anywhere in the .war, you like. The context rootwill be the
name of the .war file, without the file extension. For instance, if your.war file
is hello.war, the context root will be hello. If you then put the"static" WSDL (which
you extracted from the client.jar), into the root directory for for thisWeb Application,
the URL to it would be something like:
http://localhost:7001/hello/HelloService.wsdl
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Your explanation makes sense, but the implementation does not make
sense
to me. This should
clearly be on the list of things to fix. Our partners use .NET or other
technologies, we
want to be able to publish a meaningful self-documented WSDL document(with
meaningful
parameter names and documentation) on our server, not as part of aweblogic-specific
Java
client jar.
Can you indicate whether this is being worked on?
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
The assumption here, is that the client will download your client.jar(or whatever
you named it in your <clientgen> Ant task), and use a file:// URL to
access
it (the
"persisted" WSDL file) from within this archive :-)
If you use the Web Services Technology Stack from BEA
(lib\webserviceclient.jar)
on the client-side, editing this file affects the construction of theSOAP message
that is sent to the Web service, which I'm assuming is hosted on an
instance
of WLS
7.0. The names for the input parameters (and return value), will be
set
to those
that you specified in this WSDL, which is one of the things you said
you
wanted to
be able to do.
If you don't use the Web Services Technology Stack from BEA on the
client-side,
there
is still a very high probability that the WSDL processor of the tool
you
use, will
use this WSDL to create the SOAP message sent to your web service,
which
again is
assumed to be hosted on an instance of WLS 7.0.
If you use the "dynamically generated" WSDL (as opposed to the one inthe client.jar),
you will get the "generic" parameter names specified in it. The
"dynamically
generated"
WSDL is accessed by concatenating "?WSDL" to the location attribute,
of
your <service>
element.
Make sense?
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Mike,
How can editing this client file make any difference to the web
service
itself?
Joop
Michael Wooten wrote:
Hi Joop,
The "persisted" WSDL file is in the .jar file, for the client ;-)
The name of this .jar file is set using either of the following:
1. The clientJarName attribute, of the <client> sub-element for
your
<servicegen>
task, or
2. The clientJar attribute, of the <clientgen> task.
The path leading to the .wsdl file, is determined by the value youassign
to the
packageName attribute (in either of the above tasks).
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
I noticed a few limitations of an automatically generated web
service
under WLS 7.0, and I am wondering if there is a way to manuallyedit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the namesgiven
to the parameters in the EJB. I remember putting in a CR a whileback,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to beable
to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but couldnot
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

Editing the subject of incoming emails

I would like to be able to edit the subject of an incoming post, and then save the edited version so that I can find it easier in future.
The subject often bears no relation to a mail's contents, and can be a duplicate or fwd with a subject which is completely off-topic.
Editing the subject and then saving it is possible with Eudora (I believe), but is it possible with Mail?
If not, how can I suggest to the Leopard team to include it as an option.
I don't care whether it is a regular feature or some kind of Applescript fix.
Grateful for any ideas . . .

I swear that someday the lawyers will destroy everything that is logical in this country. I've been using Eudora for years and I can edit the subject line to reflect the e-mail's content to be relevant for ME, THE USER. The content can't be edited, so that should take care of any witch hunt that MIGHT occur someday.
I switched to Mail to use it with my iPhone, but this single bone-headed "feature" renders Mail useless for me. I'm afraid to use Entourage because who knows how long MS will sell & support that product? I don't want webmail, because I want my e-mail stored on my Mac.
What other options are out there that will work easily with the iPhone and fly under the lawers' radar?
Thanks in advance,
Rick
TiBook 867 MHz Mac OS X (10.4.10)

How to improve the performance of adobe forms

Hi,
Please give me some suggestions as to how to improve the performance of adobe form?
Right now when I' am doing user events it is working fine for first 6 or 7 user events. From the next
one it is hanging.
I read about Wizard form design approach, how to use the same here.
Thanks,
Aravind

Hi Otto,
The form is created using HCM forms and processes. I' am performing user events in the form.
User events will doa round trip, in which form data will be sent to backend SAP system. Processing will
happen on the ABAP side and result will appear on the form. First 6 or 7 user events works correctly,
the result is appearing on the form. Around 8 or 9th one, the wait symbol appears and the form is not
re-rendered. The form is of size 6 pages. The issue is not coming with form of size 1 page.
I was reading ways to improve performance during re-rendering given below.
http://www.adobe.com/devnet/livecycle/articles/DynamicInteractiveFormPerformance.pdf
It talks about wizard form design approach. But in SFP transaction, I am not seeing any kind of wizard.
Let me know if you need further details.
Thanks,
Aravind

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to print the contents of a form(window)

I'm devloping visitors application in java. After the data entry, I need to display the selected information from database along with the photo and take a printout so that it looks like a card.
I know how to display the contents in a form. How do I print the contents of the form?
-Thanx
Hane

in JComponent there is a method called print(Graphics g)
you can use that with a Printable class
read bout the java.print package in the java doc

How to edit the existing data in the XML file from java programming.

Hi all
i am able to create XML file with the sample data as below from java programming.
i need sample code on how to edit the existing data in the XML file?
for example
<?xml version="1.0"?>
   <mydata>
           <data1>
                     <key1>467</key1>
                    <name1>Paul</name1>
                    <id1>123</id1>
          </data1>
          <data2>
                     <key2>467</key2>
                    <name2>Paul</name2>
                    <id2>123</id2>
          </data2>
    </mydata>
i am able to insert the data in the XML.
now i need sample code on how to modify the data in the above XML file from the java programming for only key2,name2,id2 tags only. the remaining tags data in the XML file i want to keep same data except for key2,name2,id2 which are i want to modify from java code
Regards
Sunil
[points will be always rewardable]

hi
u need a parser or validate the xml file for to read the xml file from java coding u need for this
xml4j.jar u can download this file from here
http://www.alphaworks.ibm.com/tech/xml4j
or we can use the SAX(simple API for XML)
some sample applications for this
http://www.java-tips.org/java-se-tips/javax.xml.parsers/how-to-read-xml-file-in-java.html
http://www.developertutorials.com/tutorials/java/read-xml-file-in-java-050611/page1.html
http://www.xml-training-guide.com/e-xml44.html
let me know u need any other info
bvr

How to Edit the CheckBox in Classic ALV GRID Display

Hi,
I want to Edit the checkbox in Grid Display.
I have one checkbox field in my internal Table,
Code Of the Program,
Data :
Begin of itab occurs 0,
CHK type C,
MATNR like MARA-MATNR,
end of itab.
Iam building the fieldcatelog using Merge Funcion module.
After that I am chaning the properties of the field
catelog like below,
loop at I_FCAT assigning <FCAT>.
Case <FCAT>-Fieldname
When 'CHK'.
<FCAT>-Checkbox = 'X'.
<FCAT>-INPUT = 'X'.
I dont have edit option in fieldcatelog.
modify I_FCAT from <FCAT>.
endcase.
endloop.
In the Layout,
I_LAYOUT-box_fieldname = 'CHK'.
I_LAYOUT-box_tabname = 'ITAB'.
It is displaying the Checkbox field.but I couldnt edit the checkBox.
I can able to edit in REUSE_ALV_LIST_DISPLAY.
But I have to use REUSE_ALV_GRID_DISPLAY.How to edit the checkbox.
Thanks in Advance,
Sumithra

Hi vasu,
The below procedure explains you to create a checkbox cloumn in the grid and allows you to edit i hope this will helps u.
The ALV Grid Control displays the cells of a column as checkboxes if the column is marked as a checkbox column in the field catalog.
     Add another field to the output table in which you want to display checkboxes
OR
     Define an existing field as a checkbox.
Procedure
1.     Add a field to your output table:
Data: gt_fieldcat type lvc_t_fcat.
Types: begin of gs_outtab.
Types: checkbox type c. "field for checkbox
Include structure <ABAP Dictionary structure> .
Types: end of gs_outtab.
Data: gt_outtab type gs_outtab occurs 0 with header line.
2 * Add an entry for the checkbox to the field catalog
clear ls_fcat.
ls_fcat-fieldname = 'CHECKBOX'.
* Essential: declare field as checkbox and
* mark it as editable field:
ls_fcat-checkbox = 'X'.
ls_fcat-edit = 'X'.
* do not forget to provide texts for this extra field
ls_fcat-coltext = text-f01.
ls_fcat-tooltip = text-f02.
ls_fcat-seltext = text-f03.
append ls_fcat to gt_fieldcat.
regards,
venu.

How to Edit the subject of a form that is submitted to me via email?

Similar Messages

Maybe you are looking for