How to edit the URL in the mail that is triggered from Solution Manager 7.1 ?

Hi,
When we perform an action "To Be Approved" for an RFC (Request For Change) in Solution Manager, a mail will be triggered to the respective Change Manager. In that mail, a link will be there which will guide the Change Manager to the SAP Logon Pad.
The problem is, the link in that mail is not pointing towards the required system. It is taking the change manager to Development system instead of Production System.
Can you please help me, how to change this URL link in that e-mail that is being triggered when the action is performed. I just need to remove the Development system URL and paste the Production system URL.
Thanks in advance,
Bharath.

Hi Bharath,
Please check below Blog and KBA:
Incident Management and Change Request Management: E-Mail functionality
in SAP Solution Manager 7.1
http://scn.sap.com/docs/DOC-35291
1831361 - Solution Manager - Changing status in CRM_UI gives BSP error
Exception Class - CX_SY_DYN_CALL_PARAM_MISSING
Thanks
Vikram

Similar Messages

I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

?I'm using Adobe Acrobat with the hope of editing a url on the graphic...a simple 3-letter change, save, close and send for printing..how do I get in edit mode to delete 3 letters and insert 3 new letters?

pkg4ibm wrote:
editing a url on the graphic...
Not sure what you mean by that: is that URL in an image, or is it actual text?
If it is in an image, then you need to extract the image, edit it with something like Photoshop, then add it back to the PDF.
If the URL is actual text, I suggest that you remove the entire URL, then add the corrected link.

Firefox opens when I click on a hyperlink in an e-mail in my Outlook 2003 program, but does not go to the URL in the link. It used to work before I re-installed my MS XP Pro 64 bit OS. Help!

At first, after I re-installed the OS, nothing would happen when I clicked on an e-mail hyperlink. So I went to Folder Options in Control Panel and associated Firefox with the E-mail file type. Firefox then opened when I clicked on a hyperlink in an e-mail, but just opens to the Firefox start page ("Blank page"). Firefox does not open the URL in the hyperlink. I need guidance as to how to restore this function which worked perfectly before I had to re-install the OS due to a corrupted program installer. I have run the MS Office Detect and Repair function twice--both times indicating that everything is fine--but it does not make a difference in fixing the Firefox function.
NEW: An attempt to click on the link in Security Center to go to Microsoft Update brings up an error message that reads: "The requested lookup key was not found in any active activation context." I have no idea what this means, but I suspect it is related to the lack of ability to open Firefox to a link URL.
See the uploaded screen print(JPEG) below.
UPDATE: PROBLEM SOLVED!! Searched on error message on line, solution fixed problem. THANKS ANYWAY

# Yes, if you go to accounts.firefox.org, sign out, you will now be signed out.
# Sign back in, and you will be asked to save the password you entered.
# This will save the password and autocomplete if you have this option turned on.
I am not exactly sure why the menu did not detect the password change or if it was stored incorrectly after you changed it? But after storing the correct password you can manage any duplicate passwords in the password manager.[[Password manager - Remember, delete and change saved passwords in Firefox]]

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

While listening to a podcast on my iPhone I can e-mail the podcast ID. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer.

While listening to a podcast on my iPhone I can e-mail the podcast ID to share it with someone else. The email contains the url for the specific podcast. So you would assume that you could put that url into iTunes and it would take you to the podcast. This used to work but no longer. Months ago when I would e-mail myself the url all I had to do was click on the link in the e-mail and it took me right to the specific podcast in iTunes. Now it only opens iTunes and I can't figure out how to find the specific one. What good is the e-mail tab on the iPhone if it doesn't connect you to the podcast you sent?

Same here. I just posted a question too.

How to get the URL of the window which is opened as a dialog

Hi All,
I am working on BPM Worklist and in BPM Worklist we have created a Custom ADF Application.
What BPM Worklist does is :- it shows the task associated to the user and when user double click on the task , it opens the custom ADF Page created by us.And it opens the ADF Page in the modal dialog.Since i do not have any control on the parent page which is the BPM Worklist page.
I need to check whether the url contains the _ADFvDlg , if it contains then i need to put some logic and then executes something.
Is there any way to find out the Url of the dialog window of the BPM Worklist using ADF not using javascript ?
Regards,
Shah

Hi Frank,
I have used the method which u have said in phaseListener
System.out.println("GOT URL"+((HttpServletRequest) facesContext.getCurrentInstance().getExternalContext().getRequest()).getRequestURL());
System.out.println("GOT URI"+((HttpServletRequest) facesContext.getCurrentInstance().getExternalContext().getRequest()).getRequestURI());
but no help, it gives me the same url of both the pages(parent and dialog one).
Say if i use the javascript and anyhow get the windowId of the dialog and pass it to the server onPageLoad then it can be helpful.
But how to do that as well.?
I mean how will i call the javascript and return url to the server and do the validations on PageLoad.
Please suggest!!
Regards,
Shah

When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?

When I open a new tab, the new tab used to show shots of 6 or so of the last sites I'd viewed, so I could easily click on one and go to it. Now it shows a blank tab and I have to type the URL of the page I want. How can I change it back?

Did you have the Google Toolbar installed?
* http://www.google.com/support/toolbar/bin/answer.py?answer=115561 Web-browsing tools : Google new tab page and most visited websites
Other extension that have a similar feature:
*Speed Dial: https://addons.mozilla.org/firefox/addon/4810
*Fast Dial: https://addons.mozilla.org/firefox/addon/5721

How can I include a captivate variable in the URL of the website widget?

I am using the website widget to bring up some customized content during the course.
The URL contains a variable which will be different for every user.
I can't find the option of including a variable in the URL with the widget.
Has any figured out how to accomplish this?

I am using Cp8.
I publish in both swf and html5 formats so that the course functions on all device platforms.
A swf only solution would preclude IOS since it doesn't support flash.

How do i delete a stationery in mail that doesn't have the X

How do i delete a stationery in mail that doesn't have the X to delete it and its beger then the rest of my other stationery

"when I try save to PDF it just wants to save it to a file?"
Correct. The difference between "Mail PDF" and "Save PDF" is that the first opens a new Mail message with the file attached. the second saves a file which you may attach to an email message.
"Terrainathome is a good example of what I am trying to do."
Not familiar with Terrainathome, but my guess is that the company is sending an email message containing HTML code that downloads what's essentially a web page into the displayed message. To do that, you'll need a website, software that will produce the necessary HTML code, and recipients with email clients capable of interpreting HTML (which is 'most email clients' these days).
Regards,
Barry

Why in address bar in not the url but "go to the web site"? How can I see url in the address bar?

Why in the address bar is not URL but "go to the web site"? How can I see the URL in the address bar?

those are some addons that other users have reported to cause the same problem in the past: Gom player, Ask Toolbar, DivX (Plus) Web Player, RealPlayer Browser Record Plugin...
in case you have one of them present, try to disable/remove it - otherwise you could disable all your extensions & reenable them one by one (a restart of the browser might be necessary after each step) until you find the culprit.

How to edit reservation qty once the reservation is partaily used in TD

Hi Experts ,
How to edit reservation qty once the reservation is partaily used in TD shipment
tried to edit reservation in MB22 but SAp is not allowing since the reservation is allredy have TD shipment.i
Thanks
Niranjan

Hi Niranjan,
Since it has been in O4F1 in TD, you could do the following:-
1. Go to O4F2.
2. Delete Reservation.
3. Go to MB22 --> Change Reservation Qty.
4. Go to O4F2 --> Reassign Reservation to TD shipment (click on "R")
Give the above a try.
Cheers.
Amit C kulkarni

How do I find out the URL of the page a document was downloaded from?

I downloaded a PDF several months ago; I can see it in my downloads history. When I right click it there, I see the link to the PDF itself, but I need to know the actual page it came from.
I've checked my History, but cannot identify the page.
Is there a definitive way of determining the URL of the page that linked to the document?

Open the Download Manager window and select that file.
Copy and paste this code in the Code field in the Error Console and click the Evaluate button.
*Firefox/Tools > Web Development > Error Console
The code adds a tooltip to the area with the file type icon at the left hand side of each entry in the DM window and shows a tooltip when you hover that area.<br />
It only works for entries that are currently visible in the DM and not for new entries that are added by downloading files and only as long as the DM window is kept open, so you need to rerun the code in the Error Console to get a tooltip.
<pre><nowiki>const Cc=Components.classes, Ci=Components.interfaces;
var enumerator=Cc["@mozilla.org/appshell/window-mediator;1"].getService(Ci.nsIWindowMediator).getEnumerator(null);
while(enumerator.hasMoreElements()){var win=enumerator.getNext();
if(win.location=="chrome://mozapps/content/downloads/downloads.xul"){
var i,r,R,C='';
r=win.document.getElementById("downloadView").getElementsByTagName("richlistitem");
for(i=0;R=r[i];i++){
var fP=R.getAttribute("path");
var fU=R.getAttribute("uri");
var sT=parseInt(R.getAttribute("startTime"));
var eT=parseInt(R.getAttribute("endTime"));
var cB=parseInt(R.getAttribute("currBytes"));
var mB=parseInt(R.getAttribute("maxBytes"));
var rU=R.hasAttribute("referrer")?R.getAttribute("referrer"):"<no referrer>";
var sD=cB/(eT-sT);
var tT=[];
tT.push("FILE: "+fP);
tT.push("URI: "+fU);
tT.push("REF: "+rU);
tT.push("");
tT.push("Total Time: "+((eT-sT)/1E3)+" sec.");
tT.push("Curr Bytes: "+cB+" bytes"+((cB==mB)?" (OK)":"(part)"));
tT.push("Max Bytes: "+mB+" bytes");
tT.push("Download speed: "+sD.toFixed(3)+" KB/sec");
R.setAttribute("tooltiptext",tT.join("\n"));
if(R.getAttribute("selected")=="true"){C=tT;}
if(C)prompt(C.join("\n"),C);
</nowiki></pre>

How to open a URL in the default browser via CC HTML Extension?

Hi,
I'm trying to open a link via the default browser in a HTML Extension for Photoshop CC built with Extension Builder 3.
With the initial example the "/indext.html" it look like this:
<li><button class="default" id="btn_PHXS" onClick="onClickButton('PHXS')" disabled="true">Run ps code</button></li>
and I changed the code from "/ext.js" to:
...function onClickButton(ppid) {    var csInterface = new CSInterface();    csInterface.openURLInDefaultBrowser('http://www.adobe.com');}...
This is what the "/lib/CSInterface-4.0.0.js" looks like:
* Opens a page in the default system browser.
* @param url   The URL of the page to open. Must use HTTP or HTTPS protocol.
* @return One of these error codes:\n
*      <ul>\n
*          <li>NO_ERROR - 0</li>\n
*          <li>ERR_UNKNOWN - 1</li>\n
*          <li>ERR_INVALID_PARAMS - 2</li>\n
*          <li>ERR_INVALID_URL - 201</li>\n
*      </ul>\n
CSInterface.prototype.openURLInDefaultBrowser = function(url)
    return cep.util.openURLInDefaultBrowser(url);
Since "util" doesn't seem to be defined I get the message:
Uncaught TypeError: Cannot call method 'openURLInDefaultBrowser' of undefined
Is the something missing?
Thx,
frankin

Hi Franklin,
Apologies for the delay but I have been trying to determine why this API is not been working. I have since discovered that, although this API is documented in the JS library, the behaviour has yet to be implemented into Photoshop CC. Offline I will try to determine why this API was included in the library when it was not ready but for the meantime, if you would like to open a browser, here is a workaround:
Instead of using:
//(new CSInterface).openURLInDefaultBrowser("http://www.adobe.com")
// Use the createProcess API to open a browser. The following shows a workflow in Windows to open Internet Explorer.
var csInterface = new CSInterface();
var rootDir = "/";
var isWindows = window.navigator.platform.toLowerCase().indexOf("win") > -1;
if (isWindows) {
                    rootDir = csInterface.getSystemPath(SystemPath.COMMON_FILES).substring(0, 3);
var processPath = "/usr/bin/open";
if (isWindows) {
    processPath = rootDir + "Windows/explorer.exe";
var url = "http://www.adobe.com";
window.cep.process.createProcess(processPath, url);
Apologies for this inconvenience but we promise to keep you informed when openURLInDefaultBrowser API is fully supported.
Kind regards,
Lea

How to find out the URL of the user coming from?

Hi folks,
From the HttpServletRequest, is there a way to find out the URL of the user coming from?
Thanks in advance!
Billy

It is strange. The link is on a different http site eg. http://www.othersite.com. The link is pointing https://www,mysite.com/index.html. I put the alert(document.referer) on the index.html. Using FireFox will show the alert http://www.othersite.com every time. However, on IE, the first time is empty. The second time I click on the link, it will show http://www.othersite.com. Very consistent.

How to include the URL in the name of the print job when printing from FF

We log all print activity in our company and it would be helpful to be able to identify print jobs from Firefox, however as only a web page's <TITLE> content is used as the print job name, I was wondering if there was a way to either use the URL as the print job name, or even prefix the print job name as "Mozilla Firefox" to identify jobs from this application?

Thank you for your reply but that's the print job content, i.e. page header / footer will have the URL typed into it. I'm after the name of the print job, i.e. as it appears in the print queue. For that I cannot find an option.
I'm wondering whether a plug-in could do this, replace the normal print function with an identical one that uses the URL as the print job name.

How to edit the URL in the mail that is triggered from Solution Manager 7.1 ?

Similar Messages

Maybe you are looking for