How to edit the value in the email activity in process flow

I have an email activity in my process flow.
I want to change the value for the message body of the email activity. But it is not editable. While creation all the columns are in editable mode and after deploying and testing, i want to change the body of the email to be sent.
How can i do it now? Please advice. This issue is in 6.0.4 release.
Edited by: 910070 on Feb 17, 2012 12:48 AM

got the solution after so much research !
in 6.0.4, only way we can change the value for the message body or subject is to change the associate email procedure. which is something like edx_rpt_email.

Similar Messages

How to use the compensate activity in bpel flow

Hi
Can anyone please let me know how to use the compensate activity in bpel flow. Like i have 4 DB adapters in a flow if any one fails i want do the roll back by using compensate activity.
I am femiliar with transactions proparties, I want to do it from compensate
Any suggestions would be appricite.
Thanks in advance.

Hi,
wrong forum, please try the SOA forum SOA Suite
Frank

How to set FROM ADDRESS for EMAIL activity in Process Flow

Hi all,
Can any one tell how to set(which address) FROM ADDRESS for EMAIL activity in Process Flow?
Thanks,
Suvvi

Did you set what OWB guide says:
To execute a process flow with an email activity, you may need to access different host machines and ports. New security measures implemented in Oracle Database 11g Release 1 restrict access to hosts and ports. You must explicitly grant access to hosts and ports that the email activity accesses using the DBMS_NETWORK_ACL_ADMIN package.
For example, the user OWBSYS needs to send an email through the mail server mail.example.com using port 25. The DBA must perform the following steps:
1. Create an Access Control List (ACL) for the user OWBSYS using the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.CREATE_ACL
(’acl_for_owb_cc.xml’,’ACL for Control Center’,’OWBSYS’,’CONNECT’);
The ACL has no access control effect unless it is assigned to network target.
2. Assign the Access Control List (ACL) to a network host, and optionally specify a TCP port range. Use the following command:
EXECUTE DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL (’acl_for_owb_cc.xml’,’mail.example.com’,25)
3. Commit the changes made using the COMMIT command.

Using email activity in Process Flow

Hi
I am creating a process flow in owb, in it I am using the email activity, that if its a success or error then send the email. In the email activity parameters there is an option of binding, so can some one tell me that how will it work and how can I use binding with email.
Thanks
Salman

Hi Salman,
add the wanted parameters (smtp server, port, to_address...) to the start_1 operator in your processflow (see another thread in this folder how to do this, because it doesn't work properly). Set the values in this operator. Bind the parameters of the email activities to these parameters. You have to fill the from and to address in each email activity even if they are bound, otherwise you will receive an error, that the values are empty. This is another bug in my opinion, isn't it...
Regards,
Torsten

How to create the compensate activity in 11.1.1.5

Hi
Can anyone please let me know how to use the compensate activity in bpel flow. Like i have 4 DB adapters in a flow if any one fails i want do the roll back by using compensate activity.
I am femiliar with transactions proparties, I want to do it from compensate
Any suggestions would be appricite.
Thanks in advance

To create users, please refer to Page 108 of http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security.pdf
To create Native Directory groups, please refer to Page 112 of http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_security.pdf
Cheers,
Jasmine.

Email utility activity in process flow

Hi.
I am new to environment. I am trying to use email activity in Process flows. I have given the parameters that have to be given like "to-address" etc. Validation, Deployment and start are getting succeeded. But I am unable get a mail. Can anybody suggest me How to use this. And also How can I find the SMTP server in my local machine. Else suggest me any links pls.
Edited by: SwapnaPrerana on Jul 20, 2010 2:19 PM

Hello Swapna,
First of all you want to configure ACL and then do the following steps.
In email properties mention the details are as follows:
PORT = 25
SMTP SERVER = (Get this details from your ITIS Team of Email Server).
Regards,
Ava

How to edit the records value fetched by select statement query in sqldever

How to edit the records value fetched by select statement query in sqldever 2.1.1.
EX-
SELECT * FROM emp WHERE ename like 'Jaga%'
Edited by: user9372056 on Aug 31, 2010 2:16 AM

Hi,
Although some forum members may be using that tool, there is still a dedicated forum for SQL Developer.
SQL Developer
Maybe your chances are better there.
Regards
Peter

How do I edit the email address that's set-up in my iPad Mail client? It's at iOS7

How do I edit the email address that's set-up in my iPad Mail Client Account? It's at iOS7 and the email address was entered incorrectly; this means the email doesn't work. There's an Edit button, which causes 3 horizontal lines to apperar at the end of the field, but does not seem to allow me to place the cursor in the field and correct the error. Unless I can correct this I'll have delete the account and start again so if anyone's able to tell me how to edit that address that would be briliant? Here's hoping................

Thanks mabaeyens; it IS the address entered in the email account, on the iPad, but sadly, as explained above, once you get to the Settings > Mail, Contacts, Calendars > Account > tap in the wrong account > Email and then hit edit, the 3 horizontal lines appear at the end of the field but touching the screen within the text of the incorrect address doesn't make the cursor appear, so I can't edit! Very frustrating obviously. In the edit mode you can drag the field up and down the page but that's all............

How to edit the node value of a tree in webdynpro java

Hi ALL
I have Tree UI element where i got displayed all the nodes by calling the BAPI
Now my requirement is when i put the cursor at any node in the Tree struture then on click of insert button i need to insert the new node with the text , the user has to be option to give new text for the new node dynamically , so while adding the new node in a tree the tree has to choose the text for new node , like how to edit the node of a tree to add new text.
If any one can send the sample code on the same then it would be great help to me.
Similar requirement like in table UI Like however we are adding the new row in a table when we click on the insert button then cursor will go to that new row in a table where user can enter his details in the table.. now i am looking for the same requirement in a Tree UI element.
is it possible the same requirement in tree UI element in webdynpro for Java??
Thanks
kallki reddy

Hi kallki reddy
In general I think this is not possible in the form you'd like. It seems the Tree control is read-only thing always. It cannot provide editing capabilities.
Table is different thing. You can select within many different cell editors including Input Fields.
I guess that you scenario could be implemented not with Tree control, but with Table with Master Column. The master column allows to bring up a hierarchy into a plain table. So it's just a tree inside a table.
Here you can find further details: [TreeByNestingTableColumn API|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/92/12a74046033913e10000000a155106/content.htm]
BR, Siarhei

How to Construct the Email To activity in SharePoint 2013 Workflow

I have a created a custom workflow and custom association and initiation form using SharePoint 2013.
My Assn. form is fine. I pass in the people picker (Active Directory group) value to my workflow just fine.
Now on my Init form I use the passed in value from people picker and display a list of users and email addresses from the people picker group. The list of users and email addresses are listed in a table with a check box to the left of each row. I am
using JQuery, Knockout and MVC web service to retrieve the values from the group.
All is well.
Now my users pick who they want to send the email to. Let's say they pick two users!
When the user clicks the submit button, I have JSOM code which starts the workflow and sends in the 2 users email addresses as an argument to theworkflow.
Note: I tried sending my two emails as a collection and failed. So i converted it to a string. The variable is called strUsers.
Since the argument is a string and Email Activity requires the To attribute to be an array, I use the BuildCollection<String> Activity to convert my string to an array.
Now in my workflow I use WriteToHistory Activity to write out my BuildCollection variable (recipients). Here's what is sent to the workflow history... [email protected];joejones@yahoo,com) Note:
Both names are bogus and I'm not Joe Jones.
I then configure the email Activity and set to To property to my BuildActivity variable (recipients).
When I deploy my Visual Studio 2013 solution, and attach my workflow to a publishing page, I am getting this error after I submit the Init form.
An unhandled exception occurred during the execution of workflow instance. System.ArgumentNullException.
Does anyone know of an example of how to set up the Email To collection value.
Note: I tried using comma and semi-colon for my string (strUsers). Neither worked.
Thanks
Tom
none

I think I'm getting close.
Here’s an
article
that helped me out and below is my code. Note: I added a ParseDynamicValue and GetDynamicValueProperty to push the data from the "emails" property to colleciton of strings called EmailCollect.
Here is what the data look likes
The value of Selected Emails is [{"emails":"[email protected]"},{"emails":"[email protected]"}]
Code excerpt in InitiationForm. Note: I am using MVVM and Knockout for the selected users from a list with checkboxes.
  //build array for workflow
  var emailUsers =
new Array();
  //cycle through viewmodel emails
for (var
i = 0; i < viewModel.SelectedEmails().length; i++)
var a =
new Object();
                    a["emails"]
= viewModel.SelectedEmails()[i];
                    emailUsers.push(a);
wfParams['strSelectedEmailsHMgr']
= JSON.stringify(emailUsers);
     // Get workflow subscription
and then start the workflow
var context = SP.ClientContext.get_current();
var wfManager = SP.WorkflowServices.WorkflowServicesManager.newObject(context, context.get_web());
var wfDeployService = wfManager.getWorkflowDeploymentService();
var subscriptionService = wfManager.getWorkflowSubscriptionService();
                context.load(subscriptionService);
                context.executeQueryAsync(
function (sender, args) {
// Success
var subscription =
null;
// Load the workflow subscription
if (subscriptionId)
                            subscription = subscriptionService.getSubscription(subscriptionId);
if (subscription) {
if (itemId !=
null && itemId !=
// Start list workflow
                                wfManager.getWorkflowInstanceService().startWorkflowOnListItem(subscription,
itemId, wfParams);
Now I deploy and publish the workflow but now I’m getting this error when trying to
System.InvalidOperationException: Looking up a value using a key is not supported on an instance of 'Microsoft.Activities.Dynamic.DynamicJsonArray'. at Microsoft.Activities.Dynamic.DynamicItem.TryGetValue(String
key, DynamicItem& value) at Microsoft.Activities.Dynamic.DynamicValueBuilder.PathSegmentFactory.ObjectPathSegment.Get(DynamicItem obj) at Microsoft.Activities.GetDynamicValueProperty`1.Execute(CodeActivityContext context) at System.Activities.CodeActivity`1.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
none

How to configure the email in SAP

Hi Experts,
Can you please let me know how to configure the email in the server?
Thanks in Advance
Regards,
Kuldeep Verma

Hello Indu Rayepudi ..
I have followed the Recommendations and everything is going well but I can only send emails from the same domain, how can I set up to send to hotmail, gmail, yahoo?
Mi sap es SAP ECC 6.0
The administrator said that the Exchange server already has registered the server's ip sap to enable him to relay this IP.
But nothing happens.
Do you have any idea? any help from you, I would greatly appreciate .. Gina
Here is the error: http://img.photobucket.com/albums/v484/mauzzz/SAP/SO01Erroringles-1.jpg
Edited by: GCH on Sep 25, 2008 11:24 PM

Hi gurus in ALV how to edit the fields on out put list

hi gurus in ALV how to edit the fields on out put list

hi
REPORT ZSB_ALV_EDITABLE_SAMPLE.
TABLES: SFLIGHT.
DATA: gc_container TYPE scrfname VALUE 'LIST_AREA',
gc_custom_container TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
gc_grid TYPE REF TO CL_GUI_ALV_GRID,
gs_layout TYPE LVC_S_LAYO,
gt_fieldcat TYPE LVC_T_FCAT.
DATA: ok_code TYPE SY-UCOMM.
DATA: gt_outtab TYPE TABLE OF SFLIGHT.
*DYNPRO
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '100'.
CREATE OBJECT gc_custom_container
EXPORTING
container_name = gc_container
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
CREATE OBJECT gc_grid
EXPORTING
i_parent = gc_custom_container
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5 .
PERFORM prepare_field_catalog CHANGING gt_fieldcat .
PERFORM prepare_layout CHANGING gs_layout .
PERFORM get_alv_display.
ENDMODULE.
*& Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
OK_CODE = SY-UCOMM.
IF OK_CODE = 'BACK'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR OK_CODE.
ENDIF.
ENDMODULE.
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE LVC_T_FCAT.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
I_BUFFER_ACTIVE =
I_STRUCTURE_NAME = 'SFLIGHT'
I_CLIENT_NEVER_DISPLAY = 'X'
I_BYPASSING_BUFFER =
I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fieldcat[].
ENDFORM.
FORM prepare_layout changing p_gs_layout TYPE lvc_s_layo.
p_gs_layout-zebra = 'X'.
p_gs_layout-edit = 'X'.
ENDFORM. " prepare_layout
FORM get_alv_display .
SELECT * FROM sflight INTO TABLE gt_outtab UP TO 10 ROWS.
CALL METHOD gc_grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT'
IS_LAYOUT = gs_layout
CHANGING
it_outtab = gt_outtab
IT_FIELDCATALOG = gt_fieldcat
ENDFORM. " get_alv_display

How to edit the WSDL

I noticed a few limitations of an automatically generated web service
under WLS 7.0, and I am wondering if there is a way to manually edit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the names given
to the parameters in the EJB. I remember putting in a CR a while back,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to be able to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but could not
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

Indeed, you can do this. But if you have non-built in data types as paramaters
it gets pretty tricky.
manoj cheenath wrote:
You can change the parameter/operation name in the generated
WSDL file by editing the web-services.xml file in the web-inf dir
(inside the war file). This file is generated by servicegen, but can
replaced before deploying the service.
regards,
-manoj
"Joop Kaashoek" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
Thanks very much for your help, I have sent a request to '[email protected]'.
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
I see. No, I don't work in "development" or have any knowledge of what
features are
going to be in the product. I work in the "services" (i.e. professionalservices)
division, which is primarily tasked with figuring out (and showingothers) how the
stuff works :-)
Individuals from "development" (i.e. product managers, developers,architects, etc.)
do monitor this newsgroup, so I think you should create another postthat has a subject
like "Need static or JSP-based WSDL added back to .war". The subject forthis current
post, sounded like you wanted to know how to edit the WSDL (which Ithink I answered
to your satisfaction), but it sounds like you really just want acapability that
was in WLS 6.1, back in WLS 7.0 :-)
I'm assuming that you already know that you can extract the "static"WSDL from the
client.jar and put it anywhere in the .war, you like. The context rootwill be the
name of the .war file, without the file extension. For instance, if your.war file
is hello.war, the context root will be hello. If you then put the"static" WSDL (which
you extracted from the client.jar), into the root directory for for thisWeb Application,
the URL to it would be something like:
http://localhost:7001/hello/HelloService.wsdl
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Your explanation makes sense, but the implementation does not make
sense
to me. This should
clearly be on the list of things to fix. Our partners use .NET or other
technologies, we
want to be able to publish a meaningful self-documented WSDL document(with
meaningful
parameter names and documentation) on our server, not as part of aweblogic-specific
Java
client jar.
Can you indicate whether this is being worked on?
Regards,
Joop
Michael Wooten wrote:
Hi Joop,
The assumption here, is that the client will download your client.jar(or whatever
you named it in your <clientgen> Ant task), and use a file:// URL to
access
it (the
"persisted" WSDL file) from within this archive :-)
If you use the Web Services Technology Stack from BEA
(lib\webserviceclient.jar)
on the client-side, editing this file affects the construction of theSOAP message
that is sent to the Web service, which I'm assuming is hosted on an
instance
of WLS
7.0. The names for the input parameters (and return value), will be
set
to those
that you specified in this WSDL, which is one of the things you said
you
wanted to
be able to do.
If you don't use the Web Services Technology Stack from BEA on the
client-side,
there
is still a very high probability that the WSDL processor of the tool
you
use, will
use this WSDL to create the SOAP message sent to your web service,
which
again is
assumed to be hosted on an instance of WLS 7.0.
If you use the "dynamically generated" WSDL (as opposed to the one inthe client.jar),
you will get the "generic" parameter names specified in it. The
"dynamically
generated"
WSDL is accessed by concatenating "?WSDL" to the location attribute,
of
your <service>
element.
Make sense?
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
Mike,
How can editing this client file make any difference to the web
service
itself?
Joop
Michael Wooten wrote:
Hi Joop,
The "persisted" WSDL file is in the .jar file, for the client ;-)
The name of this .jar file is set using either of the following:
1. The clientJarName attribute, of the <client> sub-element for
your
<servicegen>
task, or
2. The clientJar attribute, of the <clientgen> task.
The path leading to the .wsdl file, is determined by the value youassign
to the
packageName attribute (in either of the above tasks).
Regards,
Mike Wooten
Joop Kaashoek <[email protected]> wrote:
I noticed a few limitations of an automatically generated web
service
under WLS 7.0, and I am wondering if there is a way to manuallyedit
files to overcome these limitations:
- the parameter names have no meaningful names, such as string0,
string1, etc. This needs to be changed to at least use the namesgiven
to the parameters in the EJB. I remember putting in a CR a whileback,
but this has not been implemented yet.
- The documentation field says 'todo'. It would be nice to beable
to
add some explanatory text there.
I looked for the WSDL file in the web-services.war file but couldnot
find it. Any pointers as to whether/how this stuff can be edited?
Thanks,
Joop Kaashoek

HT201269 How to change the email address associated with an iPhone account?

How to change the email address associated with an iPhone account? I inherited my son's phone and it still shows his phone number even though I can add my own email account. My iCloud is also associated with his phone number.

If you mean you want to change the iCloud ID your phone is signed into on your phone (which looks like an email address), you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use.
If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

How to edit the records in error stock.

Hi Experts,
i have error records in error stack and the remaining records are loaded successfuly . here my doubt is how to edit the records in error stack because its not giving the edit option .
i want to get the edit option means i need to delete the request in target r wt ?
and there are two more targets is there below this process .
Advance Thanks.
Regards
SAP

HI
If you have less number records in this request(which you extracted now), delete that request from all the targets and reload again with option Valid records update, reporting not possible.
this is the option which is recommended.
follow the below 2 docs as well.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80dd67b9-caa0-2e10-bc95-c644cd119f46?QuickLink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/007f1167-3e64-2e10-a798-e1ea456ef21b?QuickLink=index&overridelayout=true
Regards,
Venkatesh
Edited by: Venkateswarlu Nandimandalam on Jan 24, 2012 4:35 PM

How to edit the value in the email activity in process flow

Similar Messages

Maybe you are looking for