HOW TO EDIT THIS MAP

How do you edit this map? I want to remove the outer info and just keep the map.
What is not seen is that this map sits in a checker board background in PS and it's a .gif file.
What can I do??

Hi there -
The image you're working with is a transparent GIF. The checker pattern you're seeing when you open in it Photoshop represent the transparent pixeles in your image.
To edit the map, you'll first need to change the color mode from Indexed Color to RGB or CMYK Color. Do this by going to Image > Mode > RGB Color.
Now, you can take a selection tool (I'm using the Rectangular Marquee tool) and select the areas of the image you want to delete. Just drag your tool around an area of the image and hit Delete on your keyboard. Repeat this until you are happy with your result.
If you want to have this image remain transparent, you can stop here and save it in a file type that supports transparency (such as PNG, GIF, or PSD).
If you want to add a background, create a new layer in your Layers Panel and drag it below your map layer.
Then, grab your Paint Bucket tool and fill the background with whatever color you want.
There you go! Hope this helps!
Cheers,
Kendall

Similar Messages

  • I have a document in Tamil language scanned and saved in TDF format. How to edit this?

    I have a document in Tamil language scanned and saved in TDF format. How to edit this?

    try NeoOffice or OpenOffice. I don't know what apps you have. Pages might open it or TextEdit, but, again, I don't know. All I can do is suggest. If you are really a stickler for format,  if you're on that dell PC again, try saving the document as a .pdf and then putting it on the thumb drive.
    JB

  • SONGS THAT I HAVE PURCHASED APPEAR TWICE ON MY PHONE. DOES ANYBODY KNOW WHY AND HOW TO EDIT THIS PROBLEM?

    Songs that I have purchased on Itunes appear twicw on my Iphone. Does anybody know why and how do I edit or remove one copy of the song?

    I have had two similar events with my Gen4 iTouch. An album was purchased thru iTunes with my iTouch. When I sync'd it with my MAC Mini (OSX Lion) each song that was included in the purchased album appeared twice on the iTouch but only once on the MacMini. Deleting the duplicates on the iTouch did not resolve the issue. With each sync they were reinstalled. The only way I could get around this was to delete the album/songs on the MAC, elect to move them to trash then re-sync the iTouch to remove them. Afterwards I was able to re-download the purchase on the MAC then sync the iTouch. This resolved the issue.
    The second event was different but the result was the same: An album was purchased thru iTunes but this time thru iTunes Store on the MAC mini. When I sync'd the iTouch there were 2 entries for each song purchased but this time there was an entry for the song itself AND an identical entry beneath it that looked similar to the play/pause sampling icon in iTunes when sampling a song prior to purchase. I am not using iCloud and I don not sync wirelessly on the iTouch. Again, all I could do was delete the purchase on the MAC Mini, sync the iTouch to remove them, re-load the purchase from iTunes and re-sync. This also resolved the issue but it makes me a bit nervous since I have a very large library. What is causing this?

  • MAP Toolkit - How to use this MAP tool kit for all SQL Server inventory in new work enviornment

    Hi Every one
     Just joined to new job and planning to do Inventory for whole environment so I can get list of all SQL Server installed . I downloaded MAP tool kit just now. So looking for step by step information to use this for SQL Inventory. If anyone have documentation
    or screen shot and can share would be great.
    Also like to run It will be good to run this tool anytime or should run in night time when is less activity? 
    Hoe long generally takes for medium size environment where server count is about 30 ( Dev/Staging/Prod)
    Also any scripts that will give detailed information would be great too..
    Thank you 
    Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

    Hi Logicinisde,
    According to your description, since the issue regards Microsoft Assessment and Planning Solution Accelerator. I suggestion you post the question in the Solution Accelerators forums at
    http://social.technet.microsoft.com/Forums/en-US/map/threads/ . It is appropriate and more experts will assist you.
    The Microsoft Assessment and Planning (MAP) Toolkit is an agentless inventory, assessment, and reporting tool that can securely assess IT environments for various platform migrations. You can use MAP as part of a comprehensive process for planning and migrating
    legacy database to SQL Server instances.
    There is more information about how to use MAP Tool–Microsoft Assessment and Planning toolkit, you can review the following articles.
    http://blogs.technet.com/b/meamcs/archive/2012/09/24/how-to-use-map-tool-microsoft-assessment-and-planning-toolkit.aspx
    Microsoft Assessment and Planning Toolkit - Technical FAQ:
    http://ochoco.blogspot.in/2009/02/microsoft-assessment-and-planning.html
    Regards,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • How to edit this to say (no live stream at this time instead of loading)

    <div id="content2_vid">
        <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" height="377" id="videoPlayer" name="videoPlayer" type="application/x-shockwave-flash" width="640"><param name="movie" value="http://video.domain.com/swfs/videoPlayer.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#000000" /><param name="allowfullscreen" value="true" /><param name="flashvars" value="&amp;videoWidth=0&amp;videoHeight=0&amp;dsControl=manual&amp;dsSensitivity=100&amp ;DS_Status=true&amp;streamType=live&amp;autoStart=true&amp;serverURL=rtmp://video.domain.c om/live/livestream" /><embed allowfullscreen="true" bgcolor="#000000" flashvars="&amp;videoWidth=0&amp;videoHeight=0&amp;dsControl=manual&amp;dsSensitivity=100 &amp;DS_Status=true&amp;streamType=live&amp;autoStart=true&amp;serverURL=rtmp://video.doma in.com/live/livestream" height="377" id="videoPlayer" name="videoPlayer" pluginspage="http://www.adobe.com/go/getflashplayer" quality="high" src="http://video.domain.com/swfs/videoPlayer.swf" type="application/x-shockwave-flash" width="640"></embed></object></div>
    How can you change this to where when the page is loaded it does not say (loading) and it will say (No live video streams) you can view archived videos.
    Is this on the server FMS Interactive in the configuration or can it be done from the code inserted above?
    Any help/advice would be great.
    Thanks

    The code above is what is pesently on the server, what inside this code would need editing?
    Presently it just states:
    loading...
    I would like for it to say (no live video stream) an image would be great (how do I change the code)?
    Do you know what part of this needs to be added/modified to say 'no live video stream is currently schduled' <--- example
    This is my code that I am using it needs to be done on the server side.
    <p>
         </p>
    <div id="content2_vid">
        <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" height="377" id="videoPlayer" name="videoPlayer" type="application/x-shockwave-flash" width="640"><param name="movie" value="http://video.domain.com/swfs/videoPlayer.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#000000" /><param name="allowfullscreen" value="true" /><param name="flashvars" value="&amp;videoWidth=0&amp;videoHeight=0&amp;dsControl=manual&amp;dsSensitivity=100&amp ;DS_Status=true&amp;streamType=live&amp;autoStart=true&amp;serverURL=rtmp://video.domain.c om/live/livestream" /><embed allowfullscreen="true" bgcolor="#000000" flashvars="&amp;videoWidth=0&amp;videoHeight=0&amp;dsControl=manual&amp;dsSensitivity=100 &amp;DS_Status=true&amp;streamType=live&amp;autoStart=true&amp;serverURL=rtmp://video.doma in.com/live/livestream" height="377" id="videoPlayer" name="videoPlayer" pluginspage="http://www.adobe.com/go/getflashplayer" quality="high" src="http://video.domain.com/swfs/videoPlayer.swf" type="application/x-shockwave-flash" width="640"></embed></object></div>
    <p>
         </p>
    Thanks

  • How to edit this help

    I have inherited a project that has about four sub-folders
    and a hundred odd HTML files.
    Now I need to add a few pages to this help project, I can add
    the individual help pages but the issue is how do I update the TOC
    (toc_oc.htm) because when I open it in DW, I get the error:
    "JavaScript required for this navigation system."
    How do I update the TOC to reflect entries for pages that I
    add?
    If this were RoboHelp, things would be pretty simple, but in
    DW I'm totally lost. Please advise.

    > open it in DW, I get the error:
    > "JavaScript required for this navigation system."
    Guessing- that is what is visible IN the design view window,
    it is not an
    error message dialog box?
    Then the entire table of contents page is a JavaScript, what
    you are seeing
    in design view is <noscript> JavaScript required for
    this navigation
    system</noscript>
    Look in code view.
    you will have to sort out how the nav script works and edit
    by hand.
    If you are lucky, there might be a copyright notice that you
    can google to
    get instructions about the script
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • After getting data in tableView, how to edit this data in database ?

    I got data in tableView with the following code.
    Now How to make changes in database with this tableView.
    Can any body help me?
    //tableView codes
    try{
    data = FXCollections.observableArrayList();
    String SQL = "SELECT * from accounts";
    //ResultSet
    ResultSet rs = db.con.createStatement().executeQuery(SQL);
    * TABLE COLUMN ADDED DYNAMICALLY *
    for(int i=0 ; i<rs.getMetaData().getColumnCount(); i++){
    //We are using non property style for making dynamic table
    final int j = i;
    acctCode.setCellValueFactory(new Callback<CellDataFeatures<ObservableList,String>,ObservableValue<String>>(){
    public ObservableValue<String> call(CellDataFeatures<ObservableList, String> param) {
    return new SimpleStringProperty(param.getValue().get(0).toString());
    acctName.setCellValueFactory(new Callback<CellDataFeatures<ObservableList,String>,ObservableValue<String>>(){
    public ObservableValue<String> call(CellDataFeatures<ObservableList, String> param) {
    return new SimpleStringProperty(param.getValue().get(1).toString());
    acctTypeId.setCellValueFactory(new Callback<CellDataFeatures<ObservableList,String>,ObservableValue<String>>(){
    public ObservableValue<String> call(CellDataFeatures<ObservableList, String> param) {
    return new SimpleStringProperty(param.getValue().get(2).toString());
    tableView.getColumns();
    * Data added to ObservableList *
    while(rs.next()){
    //Iterate Row
    ObservableList<String> row = FXCollections.observableArrayList();
    for(int i=1 ; i<=rs.getMetaData().getColumnCount(); i++){
    //Iterate Column
    row.add(rs.getString(i));
    data.add(row);
    //FINALLY ADDED TO TableView
    tableView.setItems(data);
    tableView.getItems();
    }catch(Exception e){
    e.printStackTrace();
    System.out.println("Error on Building Data");
    }

    Hi Anubhav,
    You could try this:
    <htmlb:tableViewColumn columnName = "ACTION"
                                           title      = "<center>Action</center>"
                                           edit       = "<%= gv_edit %>"
    declare the variable gv_edit in the layout and default it to 'FALSE'.
    when the event 'modify' is trigerred, set the variable gv_edit as TRUE.
    Regards,
    Madhumitha

  • How to do this mapping in XI

    hi,
    My Source Structure is like
    Object_IND      FILENAME    FILEVALUE
    0                     Column1       aaa0
    0                     Column2       bbb0
    0                     Coulmn3       ccc0
    0                     Coulmn4       ddd0
    0                     Coulmn5       eee0
    1                     Column1       aaa1
    1                     Column2       bbb1
    1                     Coulmn3       ccc1
    1                    Coulmn4       ddd1
    1                   Coulmn5        eee1
    2                    Column1       aaa2
    2                     Column2       bbb2
    2                     Coulmn3       ccc2
    2                    Coulmn4       ddd2
    2                  Coulmn5        eee2
    Basically there is a group of five records for a particula object index
    I have to display in file values for coulmn1 and column3 only
    ie my output file should like
    aa0,cc0
    aa1,cc1
    aa2.cc2
    Can we do via value mapping , or is there a simpler way to do .
    If any one of you have does , please do revert back
    Thanks
    Amit

    Hi Amit,
    <b>Can you please provide the XML structure of your source and target messages ?</b>
    As I understand, the source structure you are using is something like this -
    <Object_IND>
         <Column1>
                     <FILEVALUE> aaa0 </FILEVALUE>
         </Column1>
         <Column2>
                     <FILEVALUE> bbb0 </FILEVALUE>
         </Column2>      
         <Column3>
                     <FILEVALUE> ccc0 </FILEVALUE>
         </Column3>
         <Column4>
                     <FILEVALUE> ddd0 </FILEVALUE>
         </Column4>
         <Column5>
                     <FILEVALUE> eee0 </FILEVALUE>
         </Column5>
    </Object_IND>
    <Object_IND>
    </Object_IND>
    And so on. Correct me if this is wrong.
    There is fix no. of elements (i.e 5 elements of Column1 to Column5) for each Object Index.
    <b>Do you want to use the same values viz. aaa0 and ccc0 to be copied in the target message ? or you want that these values to be mapped first to some other values and then assign to target message ?</b>
    Create the target structure similar to this -
    <Object_IND>
         <Column1>
                     <FILEVALUE>  </FILEVALUE>
         </Column1>
         <Column3>
                     <FILEVALUE>  </FILEVALUE>
         </Column3>      
    </Object_IND>
    If you want to pass the same values of column names, then do the message mapping by mapping the Column1 and Column3 elements of source message to the Column1 and Column3 elements of target message.
    Let me know whether this is ok.
    Regards,

  • How to edit this eps image

    I have an image uploaded here for those who wish to help me hxxp://hotfile.com/dl/121047243/ca6eecc/sample.eps.html  (Please replace xx with tt)
    I nned to get rid of the lowermost single hhygely thick concave copper red glow path (and leave only the upper three concentric convex thin blur paths) but am unable to do so
    I tried ungroup (it does not exist) and i even tried delete anchor points (in zoom mode) but am unable to separate the paths and delete what i do not want
    Can you please explain how it is to be done because i find this a common issue with wave image files that have curves
    Thanks or any help

    It's a Gradient Mesh.
    Use the Direct Select Tool (the White arrow) and select the anchors corresponding to the bottom arc. Then change their color in the Color panel.

  • Any ideas on how to Edit this?

    I don't know why this photo turned out the way it did. I had no problems prior to taking this picture. Please help! I desperately need to fix this the best I can,

    One quick fix - copy the whole image onto a second layer - set new layer to Multiply.
    Adjust the opacity until you get the look you want.

  • May you please tell me how to edit this Illustrator file?

    I am kindly asking you to assisting me editing an image. https://www.dropbox.com/s/s9no77jfag62vsi/padder3Core.ai?dl=0
    As you can see, there are 4 colors (red, blue, yellow, light gray). I am struggling to find a way to delete the grey color and to stretch the other three colors enough to form a sort of equilateral triangle. Let me explain.
    At the moment, each of the four colors form a 90 degrees angle. Is there any way to delete the light grey color and make space to the other three colors so that they form a 360 degrees angle? (120 degrees each).
    Thank you so much in advance,
    Cesare

    Cesare,
    What appears in the expanded Layers palette when you have the selection shown in the Dropbox screenshot?
    It should be the three thirdendeal circles, in a Group unless Ungrouped. Each should be selectable.
    Before posting, I tried the Pathfinder Divide with the Radial Dividers, and it worked.
    If the Radial Dividers are too short to reach the circle (so there are gaps), it will be a Compound Path instead. I believe(d) that issue to only apply to rather old versions (before CS (1) or something).
    One way to get round an issue with too short Radial Dividers is to create the Polar Grid a bit too large and reduce the size of the circle to the desired value, and then to Pathfinder>Divide (the outlying ends of the dividers will disappears); in cases with an even number of dividers you may alternatively create the Polar Grid at the final size and increase the size of the divider group.
    If there is such an issue, the easy solution is Shapebuilder/Live Paint with Gap Detection, of course.

  • How To Edit This

    See image please,realy need help.
    https://plus.google.com/photos/115221653662814636124/photo/5935297198531373922

    That is a problem with delta-search.
    *http://malwarefixes.com/remove-delta-search-virus/
    You can use the SearchReset extension to reset some preferences to the default values.
    *https://addons.mozilla.org/firefox/addon/searchreset/
    Note that the SearchReset extension only runs once and then uninstalls automatically, so it won't show on the "Firefox > Add-ons" page (about:addons).
    You can check if you have a user.js file in the profile folder to initialize some prefs on each start of Firefox.
    The user.js file is only present if you or other software has created it, so normally it wouldn't be there.
    you can check its content with a plain text editor if you didn't create this file yourself.
    The user.js file is read each time you start Firefox and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    *http://kb.mozillazine.org/Preferences_not_saved

  • How to edit an XML file?

    Guys, I have a podcast in iTunes, I want to start to promote it. In order to do this, I think I will have to put tags in the XML file for different sites and I would like to know how to edit this. Does anyone have any good places for me to check out how to do this?
    Thanks!

    Vinnie, thanks for getting back to me on this, I am pulling my hair out!
    What FAQ are you speaking of? The one in iTunes or someplace on this board?
    By claim, what I mean is this. Lets say I try to add my podcast to Podcast Alley's directory. If I copy and paste my RSS feed in there, it says that it needs me to add their "tag" or whatever in my RSS so they know it is my podcast. They need me to add this line in the XML file I think to "claim" my podcast so it will show up in their directory. This seems to be a common thing with other sites as they give me some XML code to add to my RSS also.
    Make sense at all?

  • How to remove a mapped drive

    Hi all,
    i created a mapping in my iMac pointing to a folder on my notebook with windows.
    When I start Parallels to run a Windows VM and my notebook is not connected to the lan, the system stays popping up a message saying "The connection fails, maybe the server Notebook doesn't exists or blablabla...".
    I would like to know how to remove this mapping because it doesn't appear on my Mac Desktop if my notebbok is connected to the lan, but when using Parallels, is almost impossible to work with the message popping up all the time.
    TIA,
    Alano.

    The drive doesn't appear on the list...
    That's the problem...I don't know where should I go to exclude this configuration...

  • How to edit the application : tc~sec~ume~wd~enduser/LogonHelpApp

    Hi
    How to edit this application?
    When the end users use this application they are not returning back to the logon page of the portal - but to the zdsfdasf/index.html og the J2EE - which may result in confused end users.
    Anyway - how to change the redirect when selecting the Submit or Cancel button?
    Earlier you could used the com.sap.portal.runtime.logon.par file and make changes, upload it and change the autscheme.xml to use your custimized application - that does not work from SAP EP 7.0 SP11

    I've the same issue.  I'm sure, there are many clients who updated it.  Can somebody post a response on the above question.  How to modify sap.com/tcsecumewdenduser/Logon web dynpro DC?
    Thanks

Maybe you are looking for