How to edit wav files

I've been using SoundTrack Pro 3 to edit WAV files, but I've now bought a sound recorder that creates 24bit 192kHz files. These are too big for SoundTrack, so I thought that Logic Pro would do the trick. So far I've had no success in trying to combine two files that are part of the same recording; the first segment is 3.9Gb and the second 4.27Gb.
Can Logic Pro do this this, or will I need to ask for a refund and find some alternative software?
Thanks
Nick

Why 192 KHz? Do you have a compelling reason to use this absurdly high sampling frequency? That is, are you recording bats, or dogwhistles? If not, I'd advise you to convert the files to 24/48 - that'll do for almost all situations. If you really, rea-heally want a high sampling frequency for (very subtle) quality difference (imperceptable but for (maybe) some of the best trained sensitive ears), you could go with 24/96. But again, 24/48 (or 24/44.1) will do. The 24 is much more important (significant diffence with 16)...

Similar Messages

How to edit a file

Ok I probably realise that I've missed something in the literature on installing arch somewhere along the way, but I've spent the last 3 hours trying to find how get past this stage to no avail.
I've managed to realise I have a dhcp connection.
For DHCP IP
For this option, you need the dhcpcd package (already available on most installations). To make use of it, edit /etc/rc.conf like this:
eth0="dhcp"
INTERFACES=(eth0)
ROUTES=(!gateway)
but when i type "edit /etc/rc.conf" I get a colon
I presume I'm in some kind of editor, but I can't see what I'm supposed to change and what commands to use inside the editor.
Any help gratefully received

bzzzz Arch is for competent Linux users - not knowing how to edit a file suggests that you do not fall into this category. If you wish to persevere and use Arch as a learning tool, then you need to be aware that you will be required to do most of the work yourself.
See the wiki: https://wiki.archlinux.org/index.php/FA … se_Arch.3F

How to load .wav files in LabView and vi for TDM,FDM,QPSK,ASK

Hello
I am doing my project in LabVIEW that is VIRTUAL TELEPHONE COMMUNICATION SYSTEM
AND APPLICATION OF LABVIEW IN ADVANCE COMMUNICATION TECHNIQUES.I have implemented every block till date but for the rest part of my project that is advance communication techniques i need vi for QPSK,TDM,FDM,ASK and I just wanted to know how to load .wav file in LabVIEW
Please assist me for this
Attachments:
Telephone communication process.docx ‏25 KB

Hi Dilpreet,
reading wav files is easy using the functions from the sounds palette...
For your other tasks you could use a seperate toolkit or do some programming on your own!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 using ftp

how to edit xml file particular value. and how to send xml file over ip address 192.168.2.10 device using ftp through Ethernet

Hello
For using FTP function in LabVIEW, I recommend you to check this document: FTP Basics
Also, take a look at FTP Browser.vi, which is available at the Example Finder.
To edit a XML file, try to use VIs in XML palette. Maybe Write to XML.vi helps you.
Post your current VI if possible.
Regards
Mondoni

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

Hi, somebody knows how to edit a file that I created in corel draw 11 and I need to edit like PDF!!!! is so simple and nobody knows howwwwwwwwwwww!!!!

See your other thread.

How to edit *.folio files in Folio builder

Hi,
I have list of .folio files and I want to edit those files and copy the text from the .folio fiile.
Can any tell me how to edit .folio files.
Is it possible to edit the .folio files in Folio panel. Or if any other application can able to open the .folio files, please guide me on this.
Thanks,
Krish

You could, but you won't get what you want.
The .folio file simply contains flattened images/pdfs of the page. So thus, you can't copy the text as though it's XML or part of some sort of word document. I suppose you might be able to try to copy and paste the text off of the PDF, if it's a PDF folio. But.. yick.
From folio builder, preview the folio on your machine using the desktop Content Ciewer. (Or Export it via Folio Producer after publishing it privately.)
On your mac, then navigate to \Users\{username}\Library\Application Support\com.adobe.dmp.contentviewer\Local Store\FolioCache\{Folio Name}\{Article Name}\StackResources.
This should get you to the PDF files for each article.

How to edit NTFS file permissions in Windows PE 3.0

Does anyone know how to edit NTFS file permissions from Windows PE 3.0?

Hello,
The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
Since your post is off-topic, I am moving it to the
off topic forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How do I edit wav files on my mac air?

Hi Im new to the site and to mac. Can anyone help me edit a simple wav file on my mac air? I've found plenty of blogs which say I can use quick time app but when I open mine, there are no options to edit or do anything other than play and record. Confused!

Hi lyndafromkingston,
I see that you would like more information about editing files in QuickTime. Here is an article for you that can give you some steps to help you accomplish this:
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files - Apple Support
http://support.apple.com/en-us/HT201066
Editing content
QuickTime Player lets you easily edit content you've created or downloaded. You can trim, combine, and rearrange clips. When you're done, just save or export your finished video.
Trimming
To remove unwanted footage from your media:
Open the file in QuickTime Player.
Choose Edit > Trim. The trimming bar appears.
To select the portion of the recording you want to keep, drag the yellow trimming bar handles to the left and right as desired.
When you are satisfied with your selection area, click Trim. The unwanted footage outside the the yellow trimming bar is removed.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

How to extract wav file in specific time?

I can now play and record the wav file using java. However how can I edit the wav file and extract a specifc time period of the wav file? Which library or method should I use?
Thanks

Well, I'm not going to give you your code on a silver platter. You'll need to put some effort in it yourself.
So look at that available() method yourself an see if you can improve on that. Look at the api docs, there is loads of information there, and often it will give you pointers on why things are not working.

Edit WAV file Description?

How to change or edit the audio properties i.e. Author, Summary and so on for a WAV file in LV. Can some one give some insights on this. TIA

You might find the details in the following post helpfull. It details where to find information on the format and what other have done.
http://forums.ni.com/ni/board/message?board.id=170&message.id=156093

How to edit audio files recorded on Ipod

I'm new at this! I'm recording long interviews on my Ipod, which get downloaded as Voice Memos into Itunes. I need to edit those files, and thought Garage Band would be just the program to do it with. Now I'm not sure it will work. The original files are in.wav format, but I figured out how to translate them into .mp3 format, too. Regardless, Garage Band won't recognize them. What is the best way to edit those interviews? Is there a way to do it with Garage Band? If I have to look to some other app, what do you recommend? Thanks for any light you can shed!

If they are in itunes, you should be able to just drag them from the itunes sidebar area in garageband to edit them.
If not and mp3 isnt working try converting it into aiff although wav works fine on garageband too.

Lightroom won't ask how to edit a file when I select "edit in Photoshop CS6"

Yesterday Lightroom suddenly stopped asking how I want the file edited when I select "edit in Photoshop". I opens the file directly in Photoshop without asking do I want to "edit with Lightroom changes", "edit a copy", or "edit original".
I've tried finding a setting to turn this on or off and found nothing. I've tried shutting down. I've even tried removing and reloading both Photoshop and Lightroom. As far as I can tell it has defaulted to always opening with LR edits.
I'm using Lightroom 5.3 and Photoshop CS6 extended version 13.0. I ran updates on both after reloading yesterday. I'm using the Mac versions of the software.
Please help!
Message was edited by: Jon Beverly in Homer AK

Is it possible that you've switched to using Raw (or DNG) files? There is a different process when using a Raw file versus using a rendered file such as Jpeg, Tiff, PSD....and it's only the latter file-types which will prompt the "Edit a copy, Edit original, etc" question. If the ACR levels are compatible (which they will be if your ACR plug-in for PS CS6 is up-to-date) then there will be NO question when using "Edit In...." on a Raw/DNG file, the file is rendered automatically in the background by Photoshop's ACR plug-in, when you then "Save" in PS the now-rendered file (Tiff or PSD, depending on your external editing preference setting) will appear back in Lightroom.

How to Edit PSD Files In Flash Template

Hi Everyone,
I am new to flash and I am trying to create my first flash site using a template that I have downloaded. I can edit the first page fine, but when I click the "about us" or any other section, the standard template text, Which isn't even in english, appears. I believe that these are psd files, and I have tried to edit them, saved and replaced file on my computer, but still I get the same unchanged text on this site when I preview. Could someone please tell me how to edit and replace these files within the flash movie?

Instance names are the reference names that you give to the individual items on the stage. Only movieClip and button symbols can have instance names.
When you import a photoshop file to Flash you will get individual bitmap objects on the stage and in a folder in the movie's Library. You will need to select each item, one at a time, on the stage and convert each one to a symbol. When you make that conversion the name that you give to that new movieClip or button is the name that you will see in the Library.
When you select that new symbol on the stage, look at the Properties window. You will now see a space at the top where you can give that item an instance name. The instance name is what you will use in Actionscript to control that object on the stage.
When you look in the movie's Library, you will see the original bitmap and the symbol that you created that contains that bitmap.
Does that help?

How to edit PSD files on Photoshop Creative Cloud

Hi there,
I am new to Creative Cloud and just downloaded the Photoshop App to my desktop. However, I can't seem to find the options where I can edit my psd files. Can someone please help me? I would like to know how I can start editing PSD files on the Photoshop Creative Cloud App.
Thank you so much!

HI Resumeboston16,
Which version of Photoshop are you using? Photoshop CC?
You'll probably still want to save you PSD files locally to the computers hard drive. You can upload them to the Creative Cloud files page here https://creative.adobe.com/files through the browser.
Then you could download it on another computer to work on it there.
-Dave

Need help on How to edit RDF file to see fields

Hi all ,
Thank you all for being helping
could please someone explain where and how to edit the RDF file to view the code and fields, sometimes we need extra fields to add in the RTF templates.
And if I get XML file from EBS, on top of the page of xml file tags says <RAXINV>
how can i able to see this RAXINV short name in EBS on particular application to view fields and other info reg report,that way I can see columns and tablenames by using Help- ->record history, and Diagonise that particular report.
any help please
vasu

Hi Srinuk, I'm not sure what you mean?
An EBS report (RDF) "root" tag will always start with the "module" name in the property pallete of the report itself. Your XML tags and nestings are a direct result of your data model groupings combined with whatever your layout is defined as?
Looking at a record history within EBS only tells you what table the form is looking at and I can't see what this has to do with an EBS report definition unless I'm missing something in your question.
You need to open the RDF to getting the data model to understand the XML tags.
Rob.
http://www.scnet.com.au

How to edit wav files

Similar Messages

Maybe you are looking for