How to edit width and spacing of bars in Numbers?

I have a graph with 4 bars, each in a different series/set so I could edit the standard deviations separately, but they're spaced far apart and the bars are really narrow. I put the gaps between columns and sets at 0% and that didn't do much. Any way to manually widen the bars and/or move them closer together?

When I have each of the values in the same series and go to use Custom Error Values, I am only able to set one standard deviation for all of the bars, instead of one for each. That gave me this:
As I mentioned in the first post, I manipulated both the gaps between columns and sets, which only let me get the bars this wide and this close together:
This issue is something I've searched extensively, and I think the lack of customization ability might just be an error in the program itself and might not be something they offer (but should).

Similar Messages

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

Help to edit width and height of menu?

http://www.ivoog.com/link4
How can I edit the width and height of this menu so the
background image fits? Please explain and give code if you can.
Thanks!
Here's the pictures for the menu:
http://www.pics.ivoog.com/boxs1.gif
http://www.pics.ivoog.com/boxs2.gif

Your approach simply isn't going to work.
The background image is a fixed width. It will not shrink or
grow like the
text in front of it.
The background image is wider than the word "pie" but not as
wide as the
word "sigh".
So, if you add padding to the left and right of the link to
make the whole
background show behind "pie", the same padding is added to
"sigh". Now the
"sigh" link is much wider than the background image. Because
your
background image repeats, you see the left edge of the next
repeating one
behind sigh.
If you remove the padding to make it so you see just one
image behind
"sigh", now the padding around "pie" is too narrow to see the
whole
background.
You could try giving each link a class and having a separate
padding for
each word, but all that is pretty useless because different
people have
different text size settings in their browsers.
In some browsers, the words will be bigger than the
background image.
In others, the words will be small and you'll only see part
of the
background.
The free tutorial I sent you is just that, a tutorial.
You do the work, you have the copyright.
If you are not interested in that one, here's another idea.
You can use borders and simple background , like a gradient,
to make a tab
that looks just like your tab images and sizes along with
your text...no
matter how long the word is and no matter what size the text
is.
Here's the free tutorial.
You don't even have to do the whole thing, just the first
part where it
shows you how to make links that look like image buttons.
http://projectseven.com/tutorials/css/uberlinks/index.htm
Good luck,
Tim
"hahahaadobeman" <[email protected]> wrote
in message
news:[email protected]...
> Thanks for answering and sorry for the confusion. The
only problem with
> purchasing and doing this is copyright. I want to make
my own code for the
> menus so it is not copyrighted by anyone.
>
> Can you help edit the width and height of this menu so
the background
> image
> fits? See how my link4 where it says pie sigh and all
that the background
> of
> that doesn't fit with the image? Can you help with this
problem? Thats all
> I
> really needed but thanks for all the links!
>

How to edit custom and/or user dictionaries in OPPM v.9 (NOT P6)

Hi All:
Thanx, Sachim for your help on my earlier question.
Now that I have poked around a little more, I realized that I haven't seen anything about how to EDIT the dictionary files once created. The "organizational custom dictionary" text file could just be edited with any text editor, but what about the other available OPPM dictionaries?
I've also noticed that if a User adds a word, it goes into his/her personal dictionary. That means that its not available to other Users. How does one clean them up of accidentally (or unintentionally) added mis-spelled words? Every other application I've ever used with a spell checker has that function somewhere, but I can't see it in OPPM. It would be great to be able, as an Administrator, to be able to "harvest" those added words, to share with the other users.
Anyone have any info on these issues? Thanx in advance.

if you are using 12.1.3/4 then you can do using "Define Parameter" screen to create LOV and attach to integrator.

How to edit PSA and continue the load with corrected data from PSA.

Hi,
Can you guide me on how to edit data in PSA and then continue a load?
i.e. if you can provide me with the steps on how to fix a load problem if a load fails. The load fails and Monitor shows red, so how do I fix them in the PSA and then allow the load continue with the corrected data into the data target.
I will appreciate the details steps involved.
Thanks

Hi
First select that request then turn to Red and delete the Request , delete the qeruest then system allow to edit the psa data ,selete psa then selet packet then selet record double click modify the data, dont forget after completing save the data. after competing modification then select psa right click select- start update immediatly......
thanks
ram

How to get width and height of a jpg file ?

Hello,
I'm trying to insert a jpg file in a blob field on my database. The problem is that I need to get the file width and height in pixels. My class does not have a graphic interface, it's a batch. Does anybody has an idea of how can I do that ?
tia.

Write a jpeg decoder that can figure out how to determine the width/height of a jpeg file? Google it.
Or if you're really lazy, load each jpeg using the
Toolkit.loadImage( URL ) function and use getWidth/getHeight from there, but that's slow.

How to get WIDTH and HEIGHT fields from applet tag?

I am developing an applet using JDK1.1 (to ensure microsoft jvm compatability).
A problem I'm facing is that there are no getWidth() or getHeight() method for Applet in 1.1, so I am hoping I can get this info from my html: <APPLET CODE="MyApplet" WIDTH=600 HEIGHT=856></APPLET>
getParameter didn't work, so does anyone have any ideas how I could get the width and height?
Cheers,
James

Write a jpeg decoder that can figure out how to determine the width/height of a jpeg file? Google it.
Or if you're really lazy, load each jpeg using the
Toolkit.loadImage( URL ) function and use getWidth/getHeight from there, but that's slow.

How do i copy and paste selected rows from numbers to another numbers worksheet

I have asked this question before, but it sounds as if numbers did not have the update at that time. I have pasted a spreadsheet from excel into numbers. I would now like to take selected rows, for example, row 5, row 9, row 22, row 27, etc, copy these entire rows, and pastte into another blank numbers work sheet. In excel, one can hold down the ctrl key, and click on each row they want to copy, and all will be copied in one operation, Than you can paste into a new excel work sheet. I have tried this on my ipad 2 many times, holding down the command key, and tapping on each row I want to copy. I just cannot get this to work. Please let me know how to do this, if numbers even has this possible. Thanks.

I have tried this on my ipad 2 many times, holding down the command key, and tapping on each row I want to copy.
Command Key.... on ipad? Ddint know there was one.
As for copying non-continuous ranges, cannot be done on ipad at this time. On a desktop maybe, but i cannot test it right now.
Each row can be done individually, or you could sort the rows to grab the range you want. To do this (espeically if there is nothing that is unique about them), just make a new column and place a 1 in the cell for each row you want to copy, sort. That will place all your rows together and enable you to copy.paste them back out.
If you want to preserve the original sort order, make another column (I usually use A for this) and put in =ROW() as the equation. Fill it down for the whole table and copy/paste values over it. now after you do any kind of sorting, you can always return the list to the original sort order.
Jason

How to Edit Word and Excel file in N9

Hi, I can open the Ms Word and Ms Excel Files in N9 but I can not edit the text or Cells. Please advise the way to edit the text in the Word or Excel Files.

Apparently, Nokia considers it to be strange that someone want to edit documents on smartphone, and considering that most of the developers (who are able to produce office software) are not interested in MeeGo, we will not have this option available.

How to edit HDV and HD 24F together?

Please help! I just did a 2-camera shoot, on Canon HV 40s. The problem is that my partner and I were in two different recording modes: HDV and HD 24f.
I am new to HD, and really don't know much about it. What is the difference between the two modes, and will it affect the look of my project when I edit footage together from the two modes?

I'd suggest using Streamclip to converty the 24F footage to the specs of the HDV camera footage.
I'm not a Canon user but I think 24F is 24 progressive.
FCE does not work directly with 24 fps.
Al

How to edit tracks and disc number?

I have the iPod Classic 160GB, and I have a Windows 7 desktop PC which has the latest version of iTunes. I am not sure what is the latest, but I always have it up to date.
I have a lot of playlists for my iPod, and I have it labeled by the albums, so in that particular playlist are my songs. Some are multi disc meaning some are two, or more, or some are a complete box set. I know for a fact I'm not doing this right. In my playlist, I drag over every disc of that album, and track numbers, and disc numbers are one big line of songs. Pretty much I would like to group my disc 1 together, and when all tracks play of disc 1 then it plays the next disc, and so on. Could someone please explain how in steps?
Thank you,

I have to sleep... I live in the UK. Your last two posts were at 02:16 and 05:59 respectively. Like anyone else helping out here I'm doing so in my spare time. And you should have all the information by now... For a multi-disc CD give each disc the correct disc number, then give each disc the same album name. If you choose the right column to sort on (Album) the CDs are listed in order with the tracks listed in order within each CD.
In the screenshot you posted you should enable the Track # and Album Artist columns so you can see clearly what is going on.
In fact for a fuller picture, turn on the columns for Track #, Disk #, Album, Sort Album, Artist, Sort Artist, Album Artist and Sort Album Artist so you can see all the factors influencing the sort.
If you sort on the Album column, set to read Album by Artist, then sorting is controlled by the first non-empty value from the following fields: Sort Album Artist, Album Artist, Sort Artist, Artist, then by Sort Album or Album, then Disk #, then Track #.
tt2

How to edit books and pdf in ibooks for mac ?

trying to edit the metadata for books and pdfs in the iBooks for mac app and it doesnt seem possible.. the "get info" window is non existant to make changes..
anyone with any suggestions or methods to edit ? or is this something the engineers left out

for a longer, more complete discussion about this, please check this discussion:
https://discussions.apple.com/thread/5468680?tstart=0
I have forwarded an enhancement request to add this feature in iBooks for Mac. The more providing this feedback, the higher this might get on the priority to solve. Please fill in your remarks and suggestion via http://www.apple.com/feedback/ibooks.html

How to edit ABOUT and HELP contents after app build operation?

I hope people can read the HELP contents and ABOUT information from the program after I build the VI into an exe file or an install file. I don't know where to edit those informations. Thanks!

After you build a VI into an application, (.exe) nothing in it can be changed since any changes would require the application to be recompiled, and that requires the LabVIEW development environment.
On a Windows PC, the "Help" file is external to the application, so you could setup in the VI Proerties > Documentation the link to the exteranl Help file, then edit that file whenever you need to. This path would have to setup before you build the .exe and would not be able to be changed.
You could use a similar approach for an "About" screen. Make a sub-vi for the About screen, and have the application builder set to "Small target file with exteranl file for suVIs" under the Build Options. This will create two files for your built application. An .exe th
at is your top level VI, and an .llb that contains all your subVIs. When you need to change the About info, you would just need to modify your original About dialog, then copy it into the .llb of the built application overwritting the original one.
If this is not what you are asking, please provide some more detail.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

How to edit sharring and proporties on TC.

Hello!
When i try to edit owner of my time capsule it is not possible.
Now it says:
Unknown: read and write (translated from danish..)..
Everyone: No access
My name is not there. And i cant change the present owner name.
What to do?

Hmm..
Now I have done that.
But my time capsule wont get back from "blinking".
You can reset your Time Capsule by pressing and holding the reset button on your Time Capsule for at least 5 seconds, until the orange LED on the front of your Time Capsule starts to blink. The Time Capsule will automatically restart itself after you let go of the reset button.
During the process, the LED on the front will keep blinking until the software has been completely reloaded and the hardware initialization has been completed. This process will take about 30 seconds, after that you will be able to configure Time Capsule again with the AirPort Utility.
Now I am completly lost.
I have tried reseting the internet. I have taken the power from the time capsule, my router, my computer. But every time the TC wont stop blinking.
What to do now?

How to get bookmarks and top tool-bar back after the Mozilla Refresh operation.

I did the Mozilla Refresh, the recommendation for which popped up today on my browser. It promised that I would get my bookmarks back - but they AND the top Toolbar are now gone. Tried Mozilla Help but can't see any detailed help on restoring the bookmarks and the top of the window browser tool-bar. (found notes on restoring bookmarks, but without the tool-bar they are not accessible). Need to get those back.

Also check that "Bookmarks Toolbar items" is on the Bookmarks Toolbar
Open the Customize window and set which toolbar items to display.
*"3-bar" Firefox menu button > Customize
*if "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize palette into the Customize window to the Bookmarks Toolbar
*if missing items are in the Customize palette then drag them back from the Customize window on the toolbar
*if you do not see an item on a toolbar and in the Customize palette then click the Restore Defaults button to restore the default toolbar setup
*https://support.mozilla.org/kb/customize-firefox-controls-buttons-and-toolbars
You can toggle the title bar on/off via the "Title Bar" button at the bottom left in the Customize palette window.
You can have the Menu Bar visible via the right-click context menu of a toolbar to have menus like the File menu with Print (Ctrl+P) and Print Preview and the Bookmarks and History and Tools menus.

How to edit width and spacing of bars in Numbers?

Similar Messages

Maybe you are looking for