How to eliminate confirm screen popup

when i click back arrow, i get a confirm screen. (to resend)
how to eliminate confirm screen popup every time?

You get an alert about resending POST data if you go back to a page that was previously requested from the server by submitting form data via a POST form.
The only way that Firefox can make sure to get the same page is by resending that POST form.
Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time.
The only way to prevent that pop-up is not to use the Back button, but to open links from a page that was requested from a server by sending a POST form in a new tab (window) with a middle-click or a Ctrl + left-click.
Then you can close that tab or window to go back.

Similar Messages

  • How to eliminate login screen

    I would like to just open my laptop and start using it without having to loging everytime I open it if it's still running.
    I have it started up, but I'll close it during the day, not turn it off just close the machine. But everytime I open it, it prompts me to log in. I get that I should log in the first time I start it up, but if it's just sleeping and I need to wake it up, I don't like to log in again.
    So yeah, how does one eliminate the login screen?
    Thank you.

    Thank you guys. I actually did both and both helped. macjack's answer allowed the stuff to still run in the background, but I still had to log in, whereas CT's eliminated the login screen altogether.
    Thank you for the help.

  • How to eliminate split screen after browser restore?

    FF 29.0.1 running on OSX 10.8. From time to time, starting FF (after killing it) and restoring all sessions, results in each tabbed window displayed in a split screen. The upper portion is is about 4" high, followed by a seam, then the actual site. Resizing can completely eliminate the useful portion - unable to shrink beyond the seam.
    Opening a new tab results in a split screen; opening a new window displays normally.
    The problem only occurs after restoring tabs - never when FF is closed normally.
    Suggestions?
    Thanks.

    Hi nxtr, your Safe Mode test strongly suggests that one of your extensions is creating the gap.
    If you haven't recently checked for extension updates, you can do that from the Add-ons page. Either:
    * Command+Shift+a
    * "3-bar" menu button (or Tools menu) > Add-ons
    In the left column, click Extensions. Then, above the list, click the "gear" button and Check for Updates.
    If they are already up-to-date, you could try selectively disabling the nonessential ones. Hopefully the problem is caused by one of those.

  • How to eliminate gray screen?

    After my machine returns from "sleep", I get a white screen and I have to use my mouse to blacken it in order to visualize the gray screen that asks for password to access. I have set my privacy and security settings so that no password is needed, but it does not seem to work. Any help is appreciated.

    Hello,
    Resolution
    Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
    If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
    Additional Information
    This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
    1. Open System Preferences > Security & Privacy > General.  Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
    2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
    Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
    http://support.apple.com/kb/TS4135?viewlocale=en_US

  • I downloaded TunesGoWatch by Wondershare. I deleted the app. Every time I turn on my computer I get a popup saying "TunesGoWatch" can't be opened because the identity of the developer cannot be confirmed. I deleted the app, how do I stop this popup?

    I downloaded TunesGoWatch by Wondershare. I deleted the app. Every time I turn on my computer I get a popup saying "TunesGoWatch can't be opened because the identity of the developer cannot be confirmed." I deleted the app, how do I stop this popup?  Your help is truly appreciated

    First:
     (Apple menu) > System Preferences > Users & Groups > select your account > Login Items.
    Determine if that program appears in that list. If it does, select it and then remove it from Login Items with the "–" (minus) button.
    Next:
    Select the entire line that follows (triple-click to select it), then control-click, and from the contextual menu that appears, select Services > Open:
    /Library/StartupItems/
    If the program or an alias to it appears in that folder, drag it to the Trash.
    Next:
    When you log out or shut down your Mac, de-select the checkbox that begins with the words "Reopen windows... "

  • How can I prevent the open/save file confirmation window popup ? Mine is currently set for "always do this action" but I still get the popup.

    Whenever I "export" a QIF file from my bank I get a File Action confirmation window popup. I have the correct application selected and I have it selected to "open" and "always do this action" but the popup always pops.
    I have checked the applications tab and the correct application is selected.
    How can I prevent the confirmation popup window please ?

    Cheers for the reply.
    I have deleted the rdf file but no difference. I still get the opening file box popup.
    From the resetting download actions link. Both lines in the about:config are missing.
    I have also tried switching the download option for the qif file to use a csr file but that also opens the confirmation box.
    I pulled this from the rdf file
    <RDF:Description RDF:about="urn:mimetype:handler:text/x-qif"
    NC:alwaysAsk="false"
    NC:saveToDisk="false"
    NC:useSystemDefault="false"
    NC:handleInternal="false">
    <NC:externalApplication RDF:resource="urn:mimetype:externalApplication:text/x-qif"/>
    <NC:possibleApplication RDF:resource="urn:handler:local:C:\Program Files\Microsoft Money\System\msmoney.exe"/>
    </RDF:Description>
    <RDF:Description RDF:about="urn:scheme:webcal"
    NC:value="webcal">
    <NC:handlerProp RDF:resource="urn:scheme:handler:webcal"/>
    </RDF:Description>
    <RDF:Description RDF:about="urn:mimetype:externalApplication:text/x-qif"
    NC:path="C:\Program Files\Microsoft Money\System\msmoney.exe"
    NC:prettyName="msmoney.exe" />
    Not sure if that helps.
    Thanks again for the reply

  • How to eliminate large gray bar at bottom of screen?

    This appeared when Firefox was first downloaded. Has not appeared on any other download. Duplicates items in toolbar at top of screen, which is where I want them. How to eliminate this large gray toolbar??

    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    *https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
    Use a compressed image type like PNG or JPG to save the screenshot.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can check for problems caused by a corrupted localstore.rdf file.
    *http://kb.mozillazine.org/Corrupt_localstore.rdf

  • 11.5.10.2 - How to personalize Confirmation page of Forgot Password link

    We have implemented the Forgot Password functionality in our 11.5.10.2 system. We need to personalize the Confirmation screen message.
    How do we personalize the following message:
    "An email has been sent to the email address on file. Contact the system administrator if you do not receive your password within the next few hours."
    Reason:
    Our help desk is getting calls from our users because they think that they will have to wait for a few hours to receive their temporary password. Our goal was to eliminate calls to our help desk regarding forgotten passwords but this message is causing more calls than necessary.
    We need to change the message to read as follows:
    "An email has been sent to the email address on file. You should receive the email within a few minutes. Please contact the Support Center if you do not receive your password within an hour."
    I have accessed the CommonMessagePG that appears to control the Confirmation screen (/oracle/apps/fnd/umx/util/webui/CommonMessagePG) but I cannot find where to change the actual text of the message.
    Any advice?

    Try this:
    Go to "Application Developer" responsibility
    Select "Messages" from the menu
    Query the message name and then enter your message text in the "Current Message Text" field
    Save changes and exit
    Clear cache and bounce Apache to see the change.
    Also, the metalink article below might help:
    How to open customized page when click on "Forgot Password" URL ? [ID 556454.1]
    Kristofer Cruz

  • I install LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it. But the popup keeps on coming with the old name.

    I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.

    I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
    They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
    I don;t have the drive shared out at all at the moment, is this necessary?  How do I do this if so?
    I have attached the screen shots of all the settings.
    Thanks again for your help.

  • How to an on screen dialogue box?

    How to an on screen dialogue box?

    without passing the control to Servlet?Why?
    In HTTP you can send the response only once.The application where i have this requirement is an old one. In the application, I have there are some screens, whose control never goes to Servlet.
    TO be more precise, 2 pages one HTML and another JSP. And the file to be downloaded is created when JSP is called from HTML page. And there is no interaction with Servlet. The JSP inturn calls a method in Java file (which is not a Servlet) and gets all the details including the file to be downloaded.
    I have used window.open() to download the file(in JSP) in order to have Open/Save dialogue box.
    But the approach is working fine in Windows XP systems but not in Windows2000. In Win00 machines it is directly opening the file in popup without giving the user any option for Open/Save.
    Please let me know your suggestion on this.
    Thanks

  • RRI Problem : Variable Screen Popup while Jumping  to Target Query

    While jumping from Source to Target query (both are BEx queries), Variable Entry Screen of the Source is popping Up again during Jump, which after pressing Execute (F8) without entering any values, displaying Target Query results correctly. My Target query is having one and only variable on Inv Doc Num of type Replacement Path and I am not supposed to get any variable Screen Popup during Jump. How can I suppress this reappearance of Variable Screen??. I have tried with Delete Options etc in RSBBS  Assignment rules and searched for OSS Notes but not succeeded so far. I am on BW3.50 SP20. Any help will be highly appreciated.

    Hi Jr,
    I am not having the same variables in the Target at all. In fact the characteristics for which variable screen appears in the source are not there in target. I mean Posting Date, Billing Month...Etc are not ther in the Traget. In the Source Query Rows, I have Inv. Doc No as one of the Characteristics.No variable is defined for Inv Doc Num in the Source Query.
    I am not getting your question"From which cell..??". If I select any perticular Cell in the Inv Doc Result Rows of the Source Output, During Jump it will return only the details of that particular invoice only? Is itn't?. But I want details of all those invoices, that appesrs in the Source Output. That is why, I am selecting my Jump target from the GOTO botton (Red Arrow like Symbol in BEx Tool Bar), and choosing my Target.
    Thanks

  • Bex 3.5 : hide variable screen popup running SAPBEXrefresh

    Hi all,
    We need to create a simple tool specifying a file list of excel workbooks containing queries to be refereshed.
    Thanks to the doc of "boeke" and the precious Peter Knoer's posts, I've done the following :
    > log on BW,
    then for each workbook in the specified file list,
    > open workbook,
    then for each query of the opened workbook ,
    > get Variables from the "SAPBEXqueries" worksheet
    > Run SAPBEXsetVariables ("Memory and reuse variable values" option is ticked on)
    > Run SAPBEXrefresh
    ..and so on
    Everything works fine, except that each time the SAPBEXrefresh runs, the variable screen pops up with the "free caracteristics" input. I've nothing to input in there : and if click on the run button (F8), it continues correctly.
    How can I get rid off this variable screen popup from the refresh process ?
    Thanks in advance for all your helps,
    Sylvain

    Hi sylsyl ,
    I guess you need variable screen at starting level. but when you refrest result set it should not show.
    if it is the requirement, you will have two different buttons to refresh.
    1) variable refresh
    2) normal refresh
    Instead of using normal resfresh you might use variable refresh.
    so please use normal refresh. it will be solved.
    Regards,
    Ranganath.

  • Presenter 8: how to eliminate drop shadown, add outline, enlarge viewer against background

    Can anyone suggest how to
    - Eliminate the drop shadow that appears under and on the right side of the viewer?
    - Instead, I want a thin line - or no line - all the around the viewer to outline the actual slide
    - Or, ideally, how can I enlarge the viewer so it fills more of the background.  In the example below, all the white space around the slide is actually "background"

    Not sure how to eliminate the drop shadow around the bottom and right side of the presentation. I'd dig around in the XML of the published presentation and see if you can find something there.
    as to the Presentation taking up more of the window, the shape of the presentation is based on the shape of the PPT slides. So a square presentation will always look like the image you have above. If you made the PPT deck rectangular, it may fill the screen better.

  • How to Implement the Screen As of Batch Management

    Hello Everyone,
         I want to implement a screen having functionality similar to Batch Management, at "Add" Button another screen popups having two gridviews in First there would be Items and in Second their would be Serial Numbers as defined in Item Master Data.
    The same Functionality for multiple items, like in case of two items when we select first item from GridView1 it gives area in Gridview2 to add data and when we select Item2 it refresh the gridview2 to add the data in gridview2, but again when I select first Item in GridView1 it gives the same data that I added before.
    and in the end on update button all the data save in a table or two.
    How can I do that??
    Thanks in advance,
    Idrees

    Hi Idrees,
    You need two grids and at least 3 datatable.
    Grid 1 bound to DataTable 1 - This will list all the Items, nothing special about this one.
    Grid 2 bound to DataTable 2 - This will list selected batch for current selected Item in Grid 1.
    DataTable3 - This will hold all the selected batches for all the items in Grid 1.
    Now you need to refresh DataTable 2 based on the Selected item in DataTable 1.
    When the user click on a row in DataTable 1, you need to do 2 things :
    1. Read all the records of DataTable 2 and sync it to DataTable 3.
    2. Read all the records of DataTable 3 where the Item Code belongs to the Item selected in Grid 1 populate it into DataTable2.
    Tedious, but will do the job.
    When the user click Add/Update button, write the records of DataTable1 and DataTable3 into database.
    Regards
    Edy

  • How to call the windows popup  on SRM  portal

    Hi ,
    how to call the windows popup on SRM portal.
    For example when I hit "Check" on the shoppoing cart screen I get a popup  saying  that "Shopping cart Test has no errors and can be orderd".
    I am looking to thorw a popup which has got "yes" and "no" options ( like function module POPUP_TO_CONFIRM in GUI ) and based on the users choice the logic follows through.
    Thanks,
    krishna.

    Is this thread still valid? If not, please close the thread.
    If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
    Thanks
    Jason
    SDN SRM Moderator Team

Maybe you are looking for