How to eliminate some samples in exs24?
Consider the exs24 violas (orchestral->strings->viola section). There are two zones (upbow and downbow) which are active when this instrument is chosen (these are the only rows with the "on" box checked), and there are two sets of samples for each zone, one set for velocities 0 - 110, another for 111-127. (I see this in the "Vel. range of the exs24 editor.) The loudness break is clearly heard, with a significant velocity jump and a much greater slope of decibels vs velocity for the upper range. This "feature" makes it difficult to control dynamics in compositions.
So I (thought I) eliminated the higher-velocity samples by simply deleting all the 111-127 rows in the upbow/downbow zones. I then changed the velocity range of the remaining rows to 0 - 127. I saved the edited instrument under a new name.
The problem is that, when I now create a new software instrument track with this new instrument, the break at 110 is still there, so it sounds like the two sets of samples are still being used. However, the editor shows only one set of samples with velocity range 0 - 127.
It doesn't seem that the velocity is automatically non-linear, since for example with Steinway piano club, the break is around velocity 105, and is not as pronounced as for the viola. (The cello is even worse.)
Is this a bug or did I miss something?
Thanks in advance.
P.S. I could use only velocities below 109 in my compositions, but the problem is that the viola sample at low velocity and low pitch is noisy and very ugly and I would have to modify the "legato" instrument to get rid of that. So I need to solve this problem.
The original document was an imported simple(!) Word file without any TOC . . .
I created a guest user account on my computer and started from the beginning with a new document in Pages. The problem did not show up. TOC looked as expected.
Logging back in to my regular user account on my computer I created two new Pages docs and TOC's also looked fine.
I created a new Pages doc and attempted to copy/paste body text and objects from my original doc imported from Word and the TOC period problem came back.
Seems to be a strong suggestion here of a connection with Word corruption.
I will now begin to hand type the text into a new Pages doc . . . it's only 5000+ words or so . . . I'm tempted to say wryly, "thank YOU, Microsoft", but not being 100% sure of that, I'll just be quiet and continue typing . . .
Similar Messages
-
How to eliminate some cookies?
How to eliminate cookies?
You posted in the wrong operating system forum. Cookies are a function of the web browser. Are you using Safari, Firefox, Chrome and what version?
E-mails should not be affected by cookies, unless you are using a webmail website for your internet provider. Most providers offer IMAP and/or POP3 e-mail support. You just need to settings for that. Sending mail with that sort of provider just requires an SMTP server for Mac OS X Mail. Note, if the juice for the internet is not coming from Telenet, but someone else you'll have to use password authentication in Mail, with a port such as 2626, 2662, or 587 with the username being your full e-mail address.
Those settings require no cookie changes in Apple's Mac OS X Mail. If your signature is accurate, Mac OS X Mail is in your Applications folder as just plain "Mail." (without quotes). -
How eliminate some email address when sending to a Group
On Mac mini signed up for Thunderbird because Mail/Comcast would receive but not send messages. I have groups listed in address book. I can select a group and Thunderbird sends BCC out fine. I want to be able to eliminate some of the members in the group from some emails. I do not see who they have been sent to until the email has been sent. I want to edit the names in the group when I get ready to send. Any way I can do this. This is the way I was handling group messages in Mail. It worked fine until they decided to receive but not send my e-mails.
As per https://support.mozilla.org/en-US/questions/1022522 you solved your problem. Please mark this thread as 'Solved'.
Thank you. -
Playback speed in Sample Editor window many, many times faster than track (at correct speed) in arrange area. How do I sync Sample Editor playback speed to correct speed/tempo in arrange area? Track is spoken word. Sample Editor playback sounds like Alvin on a meth binge. Spoken phrase is generated from Textspeech. Textspeech can export files as WAV files or MP3 files. Perhaps a clue?: When exported Textspeech WAV file is dragged and dropped into track in arrange area of new project, it exhibits same supersonic speed. When Textspeech file is exported as MP3 file and dragged and dropped in arrange area track, it plays at correct speed.
Thanks Erik,
If nothing else, this huge list of updates and fixes, shows clearly that the Logic Dev team is working hard on fixing and improving LPX to a major degree.... and from the list of fixes done.. show they do read the bug reports submitted!
As an aside....
I recall how all the 'naysayers' prior to LPX (and in some cases, since...) were proclaiming how Logic was dead, the team was being disbanded, we won't see any further development, the Dev team doesn't listen or care... and so on....... I wonder where those people are now? -
How to eliminate null values from the data?
This query displays data for a project with approval & submission dates...I'm trying to eliminate records that have null values in Approval & submission date columns at the same time. But rather keep the records that have atleast one submission date or approval date?
SELECT distinct QP.QIP_id,
Max(decode( Upper(QP.Status_CD), Upper('Approved') , Effective_date, null )) as Approved_date,
Max( decode( Upper(QP.Status_CD), Upper('Submitted') , Effective_date, null ) ) as Submitted_date
FROM Llp_Sys.Project_Status QP
WHERE SYSDATE >= qp.effective_date
AND (qp.terminated_date IS NULL OR SYSDATE < qp.terminated_date)
GROUP by QP.QIP_ID,Qp.Status_CD
order by QP.QIP_IDfrancislazaro wrote:
This query displays data for a project with approval & submission dates...I'm trying to eliminate records that have null values in Approval & submission date columns at the same time. But rather keep the records that have atleast one submission date or approval date?
SELECT distinct QP.QIP_id,
Max(decode( Upper(QP.Status_CD), Upper('Approved') , Effective_date, null )) as Approved_date,
Max( decode( Upper(QP.Status_CD), Upper('Submitted') , Effective_date, null ) ) as Submitted_date
FROM Llp_Sys.Project_Status QP
WHERE SYSDATE >= qp.effective_date
AND (qp.terminated_date IS NULL OR SYSDATE < qp.terminated_date)
GROUP by QP.QIP_ID,Qp.Status_CD
order by QP.QIP_ID
based on my assumption, will the following not work ? if so then post some sample data and expected output (simplify as much as possible)
SELECT *
FROM (SELECT DISTINCT qp.qip_id,
MAX(DECODE(UPPER(qp.status_cd),
UPPER('Approved'), effective_date,
NULL
)) AS approved_date,
MAX(DECODE(UPPER(qp.status_cd),
UPPER('Submitted'), effective_date,
NULL
)) AS submitted_date
FROM llp_sys.project_status qp
WHERE SYSDATE >= qp.effective_date
AND ( qp.terminated_date IS NULL
OR SYSDATE < qp.terminated_date
GROUP BY qp.qip_id, qp.status_cd
ORDER BY qp.qip_id)
WHERE approved_date IS NOT NULL OR submitted_date IS NOT NULL;Edited by: Clearance 6`- 8`` on Jul 9, 2010 12:46 PM -
How to export some data from the tables of an owner with integrity?
Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
In the DAQmx 9.4 Readme the following is stated:
Samples Not Acquired on NI 660x or NI 6624 Devices When using pulse width, semi-period or two-edge separation buffered measurements with the NI 660x and NI 6624 on counters 0 and 1, some samples may not be acquired under certain circumstances.
Could anyone elaborate on this? I am particularly interested in knowing under what circumstances this problem arises for the 6602 PCI devices.
How should I understand 'NI 660x and NI 6624 on counters 0 and 1'. Is it only a problem on counter 0 and 1 for the 660x or does this only apply for the 6624 devices.
/molaAre there any NI Product Support Engineers out there who has an answer to this question and who are willing to share it with me?
-
How to eliminate spaces while reading a file in BPEL Process
Hi All,
How to eliminate space when reading a file which of fixedlength and inserting into database.
Inserting some of columns sucessfully but there is a column where there is a space n front the value, how to eliminate the that space.
I have a custom XSD and using out in the process. How to resolve this issue to get all rows sucessfully inserted into the database.
Anyone hod gone through this kind of functionality.
Regards,
CHHi,
try to use XPath functions like 'normalize-space()', 'right-trim()', 'left-trim()' in your transformation.
Regards,
Martin. -
How to run a sample Jolt client
Can any one explain me how to run a sample jolt client.
Iam trying to run the following jolt client code ToUpper.java at the command prompt but I am getting the following error.I am getting the same error when i run the Jrepository Applet RE.html.
D:\ToUpper>javac ToUpper.java
D:\ToUpper>java ToUpper
bea.jolt.SessionException: Cannot connect to any //localhost:3050.
Reason:NwHdlr: Network Error: chkauth: J_CHECKAUTH FAILED
at bea.jolt.JoltSessionAttributes.getDomainInfoJoltSessionAttributes.java:584)
at bea.jolt.JoltSessionAttributes.checkAuthenticationLevel(JoltSessionAttributes.java:507)
at ToUpper.main(ToUpper.java:20).
I have the tlistener running and provided apppassword and userpassword as my System login password where I have the complete Tuxedo Installation(server and client). Please see the attached sample jolt client program I am trying to run. I am not sure what configuration Settings I need to do.
ToUpper.java
/* Copyright 1996 BEA Systems, Inc. All Rights Reserved */
import bea.jolt.*;
public class ToUpper
public static void main (String[] args)
JoltSession session;
JoltSessionAttributes sattr;
JoltRemoteService toupper;
JoltTransaction trans;
String userName=null;
String userPassword=null;
String appPassword=null;
String userRole="myapp";
String outstr;
try{
sattr = new JoltSessionAttributes();
sattr.setString(sattr.APPADDRESS, "//GVC3ZA03TESTING:3050");
switch (sattr.checkAuthenticationLevel())
case JoltSessionAttributes.NOAUTH:
break;
case JoltSessionAttributes.APPASSWORD:
appPassword = "123456"//"appPassword";
break;
case JoltSessionAttributes.USRPASSWORD:
userName = "myname";
userPassword = "123456";
appPassword = "123456";
break;
sattr.setInt(sattr.IDLETIMEOUT, 300);
session = new JoltSession(sattr, userName, userRole,
userPassword, appPassword);
toupper = new JoltRemoteService ("TOUPPER", session);
toupper.setString("STRING", "hello world");
toupper.call(null);
outstr = toupper.getStringDef("STRING", null);
if (outstr != null)
System.out.println(outstr);
session.endSession();
System.exit(0);
}catch(Exception e){
e.printStackTrace();
} // end main
} // end ToUpperHi Todd,
I am not getting the jcheckauthentication error now as i changed the port no. to the port where JSL is running.Now I am getting this error.Also find the ULOG contents pasted below.
D:\bea\tuxedo9.1\samples\jolt\ToUpper>java ToUpper
Authentication Level set To :0
Exception caught error no is:6
bea.jolt.ServiceException: TPENOENT - no entry found
at bea.jolt.JoltRemoteService.decodeCALL(JoltRemoteService.java:460)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:345)
at bea.jolt.JoltRemoteService.call(JoltRemoteService.java:267)
at ToUpper.main(ToUpper.java:39)
I have checked the jrepository file and also the Applet window for the service defination(TOUPPER)but still its not recognizing the service.Is there some configuration thing I have missed out before running JOLT client.
ULOG File Contents
132947.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
132956.GVC3ZA03TESTING!WSL.432.5308.0: WSNAT_CAT:1197: INFO: Exiting system
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
132956.GVC3ZA03TESTING!JSH.4000.2464.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
132956.GVC3ZA03TESTING!JSL.2644.2356.0: JOLT_CAT:1197: "INFO: Exiting system"
132956.GVC3ZA03TESTING!DMADM.5844.5348.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
132959.GVC3ZA03TESTING!BBL.3216.4372.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133021.GVC3ZA03TESTING!tmloadcf.6104.3164.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
133028.GVC3ZA03TESTING!BBL.6140.5124.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
133028.GVC3ZA03TESTING!BBL.6140.5124.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
133028.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
133028.GVC3ZA03TESTING!JSL.5608.6088.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133028.GVC3ZA03TESTING!JSL.5608.6088.0: LIBTUX_CAT:262: INFO: Standard main starting
133028.GVC3ZA03TESTING!JSL.5608.6088.0: INFO: JOLT Listener version-BEA Jolt 9.1
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
133028.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
133029.GVC3ZA03TESTING!JSH.6028.5748.-2: INFO: JOLT Handler version-BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Current version: BEA Jolt 9.1
133029.GVC3ZA03TESTING!JREPSVR.3476.4980.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
133029.GVC3ZA03TESTING!WSL.3292.4892.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSL.3292.4892.0: LIBTUX_CAT:262: INFO: Standard main starting
133029.GVC3ZA03TESTING!WSH.2568.3772.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.2568.3772.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133029.GVC3ZA03TESTING!WSH.5764.3836.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
133029.GVC3ZA03TESTING!WSH.5764.3836.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
133242.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133300.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
133359.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
133456.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid32(ACCOUNT_ID) failed for INQUIRY: LIBFML_CAT:8: ERROR: Unknown field name. Maybe FIELDTBLS32 is not set properly.
133612.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
143325.GVC3ZA03TESTING!JSH.6028.5748.-2: Fldid(SAMOUNT) failed for DEPOSIT: LIBFML_CAT:11: ERROR: Cannot find or open field table. Maybe FIELDTBLS is not set properly.
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144116.GVC3ZA03TESTING!WSL.3292.4892.0: WSNAT_CAT:1197: INFO: Exiting system
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144116.GVC3ZA03TESTING!JSH.6028.5748.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144116.GVC3ZA03TESTING!JSL.5608.6088.0: JOLT_CAT:1197: "INFO: Exiting system"
144116.GVC3ZA03TESTING!DMADM.4928.1868.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144119.GVC3ZA03TESTING!BBL.6140.5124.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144142.GVC3ZA03TESTING!tmloadcf.2668.3316.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144148.GVC3ZA03TESTING!BBL.4144.4376.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144148.GVC3ZA03TESTING!BBL.4144.4376.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144148.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144148.GVC3ZA03TESTING!JSL.5072.2444.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSL.5072.2444.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JSL.5072.2444.0: INFO: JOLT Listener version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144148.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144148.GVC3ZA03TESTING!JSH.5856.5268.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Current version: BEA Jolt 9.1
144148.GVC3ZA03TESTING!JREPSVR.2952.1248.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144148.GVC3ZA03TESTING!WSL.3040.5488.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSL.3040.5488.0: LIBTUX_CAT:262: INFO: Standard main starting
144148.GVC3ZA03TESTING!WSH.5740.2764.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.5740.2764.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144148.GVC3ZA03TESTING!WSH.1784.5448.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144148.GVC3ZA03TESTING!WSH.1784.5448.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144157.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144207.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144226.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144229.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1196: INFO: Terminating handlers in preparation for shutdown
144518.GVC3ZA03TESTING!WSL.3040.5488.0: WSNAT_CAT:1197: INFO: Exiting system
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1506: "INFO: Terminating Jolt administration services in preparation for shutdown"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1196: "INFO: Terminating handlers in preparation for shutdown"
144518.GVC3ZA03TESTING!JSH.5856.5268.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name 'jolt'; client name 'joltadmin'"
144518.GVC3ZA03TESTING!JSL.5072.2444.0: JOLT_CAT:1197: "INFO: Exiting system"
144519.GVC3ZA03TESTING!DMADM.4436.5968.0: CMDGW_CAT:1655: INFO: DMADMSVR is exiting
144522.GVC3ZA03TESTING!BBL.4144.4376.0: CMDTUX_CAT:26: INFO: The BBL is exiting system
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144537.GVC3ZA03TESTING!tmloadcf.4892.4980.-2: CMDTUX_CAT:872: INFO: TUXCONFIG file D:\bea\tuxedo9.1\samples\jolt\ToUpper\tuxconfig has been updated
144543.GVC3ZA03TESTING!BBL.5440.4548.0: 02-01-2007: Tuxedo Version 9.1, 32-bit, Patch Level (none)
144543.GVC3ZA03TESTING!BBL.5440.4548.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3149: INFO: BDMCONFIG environment variable not set. Using $APPDIR/BDMCONFIG
144543.GVC3ZA03TESTING!DMADM.1016.6128.0: CMDGW_CAT:3761: INFO: Using version 2 BDMCONFIG, 3DES is enabled.
144543.GVC3ZA03TESTING!JSL.1796.5232.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSL.1796.5232.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JSL.1796.5232.0: INFO: JOLT Listener version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1563: "INFO: Serial Number : <454493271161-2140437240256>, Expiration Date : <2007-02-15>"
144543.GVC3ZA03TESTING!JSL.1796.5232.0: JOLT_CAT:1564: "INFO: Licensee : <BEA Evaluation Customer>"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1030: "INFO: Jolt Handler joining application"
144543.GVC3ZA03TESTING!JSH.3164.4076.-2: INFO: JOLT Handler version-BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Current version: BEA Jolt 9.1
144543.GVC3ZA03TESTING!JREPSVR.860.2916.0: Repository "D:\bea\tuxedo9.1\udataobj\jolt\repository\jrepository" (16 records) is writable.
144543.GVC3ZA03TESTING!WSL.2596.4404.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSL.2596.4404.0: LIBTUX_CAT:262: INFO: Standard main starting
144543.GVC3ZA03TESTING!WSH.3508.5136.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.3508.5136.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144543.GVC3ZA03TESTING!WSH.4288.5676.0: 02-01-2007: Tuxedo Version 9.1, 32-bit
144543.GVC3ZA03TESTING!WSH.4288.5676.0: WSNAT_CAT:1030: INFO: Work Station Handler joining application
144548.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6"
144634.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1198: "WARN: Forced shutdown of client; user name ''; client name 'myapp'"
144734.GVC3ZA03TESTING!JSH.3164.4076.-2: JOLT_CAT:1043: "ERROR: tpacall() call failed, tperrno = 6" -
How to eliminate the alarm "Client License Limit Exceeded" in Lookout 6.0.2?
There are 18 Run Time Only Servers, with no clients, running the same application. Right after the installation of the Lookout 6.0.2 software this alarm didn't show up, but after some time it does in all the systems. It makes not too much sense to me because there are no clients at all, thus no client license was purchased and entered/registered.
How to eliminate this 'false' alarm?
Any help will be appreciated!The design is complex. Within the features, each system collects data in .csv format, and once a day moves a copy of the data collected to some place in the network. Also the systems print to file the events and alarms (once a day as well), then they are copied out with the database to the same place in the network. This folder containing the database and the events-alarms in the network is for other engineers to analize, make calculations, projections, etc. It is weird for me and for the others to have this alarm every day in the events-alarms files of each system.
Each system is independent, doesn't need to have connection with the other systems. There are no clients because the database collection is enough for us. The systems are VERY STABLE, no need to trouble-shoot (remote access), or even checking how they are working. Truly, Lookout shows a good performance with this application. By the way, the application is too extensive, complex, many different things are controlled and monitored, many different communication protocols are used: OPC servers, Serial connections, etc. General speaking, the overall result is excellent. This little, no-reason alarm is the only problem: "Client License Limit Exceeded".
I'll really appreciate any suggestion regarding this issue. -
How to eliminate the noise from the stepper motor
I’m using stepper motors to move a traverse on which a hot-wire anemometer probe is mounted. When the stepper motors are turned on, they induce noise on the analog signal of the hotwire anemometer, or of any other transducer, at multiples of 120Hz.
The stepper drives are P41 Series made by American Precision Inc. The P41 Series contains a power supply, a motor drive and a logic controller. The logic controller inputs are optically isolated and utilize the 5 VDC supplied internally by the drive.
An NI 6251 or NI 6024E DAQ card is used with LabVIEW to send digital output signal to the logic controller in order to step the motors.
The AI input channels of either NI 6251 or NI 6024E DAQ cards and LabVIEW are used to acquire the signal of the hot-wire anemometer. Different DAQ cards are used for the data acquisition and the stepper motor control and the noise is transferred through the laptop to the data acquisition card (analog signal).
All cables are shielded and the noise was confirmed to be conductive and not radiative.
There was no difference when measuring the analog signal with Differential or RSE.
As a test, the leads from to the drive’s logic controller were connected to the AI input channels in order to check the magnitude and frequency of the noise flowing to the DAQ card and were found to be 5 V peak-to-peak at 60 Hz.
Please let me know if you have an idea on how to eliminate this noise.It sounds like you have a ground loop issue. If possible, try totally isolating the stepper controller from the data acquistion AI more than you already have. This could include any of the following:
Ensure the optoisolation on the control lines fully separates the power and ground of the digital output and stepper input.
Use different grounds for the stepper power supply and the DAQ power supply/computer. Isolation transformers can help here.
Use lower inductance lines for the stepper controller. This will reduce the movement of the ground.
I suspect you have probably been over the above, so you are left with filtering the noise out of the signal. Since it has high harmonic content, a simple low-pass is unlikely to work well. Your best bet is probably to characterize it and use some sort of Fourier filtering. If the relative sizes of the harmonics are always the same, you can take the Fourier transform, find the height of the fundamental, use this to calculate the sizes of the harmonics, delete them from the Fourier transform, and do an inverse Fourier transform to recover your signal. Alternately, you can use a series of narrowband filters to remove the noise, although this will also remove any signal at the same frequencies. It is better if you can improve your circuitry to remove the noise.
Good luck. Let us know if we can help you more.
This account is no longer active. Contact ShadesOfGray for current posts and information. -
How to get the sample repository data of over 6000 records for products
Hi,
I have MDM installed and ready to use with the standard 9 repositories provided by SAP. I was wondering if I can get the unarchive .a2a file with the sample data of records (I think over 6000 records) for the Products repository. I have tried to bring in the two .a2a product files that I have, but it was giving version inconsistent errors. How do and where do I get the real sample data (not the one we can create in data manager) correct version provided by SAP, so that I can get my hands on SAP data manager funtionality.
Thanks in advance,
N@v!n KHi Navin,
Business Content archives that are provided by SAP for MDM do not come with the sample data.
In the bsuiness content ,if you unzip the file you will see the a2a archive of the rep as provided by SAP and the import /export maps and the lookup data file.
There is no main records that SAP provide with the sap content it is basically the data modell that SAP provides so that the foundation is set for you and you can now import and work with the data.
However if you wish to use the demo repository or the training rep from Inquera then you will same some sample data already loaded in MDM rep to work upon.
Regarding the version problem
Check the MDM version of the business content rep with the MDM server you are using .They have to match to work correctly.
You can work with a lower archives of the rep(say SP04) with an Upgraded MDM server (say SP06) by using the Update Repository option in the context menu of the MDM server in Console.
But the vice versa is not possible.
Check you MDM server version by clicking on the MDM server and see its details in the right side record detail pane.
To know more on the demo and Inquera rep kinldy view the below links:
https://www.sdn.sap.com/irj/sdn/nw-demomodel#section21 (Demo Rep)
http://www.inquera.com/InqueraCatalog/CustomerLogin.asp(Demo Rep from Inquera you need to register and they will mail you)
Hope It Helped
Thanks & Regards
Simona Pinto -
Goto: How to export some data from the tables of an owner with integrity?
Hi to all,
Help please: How to export some data from the tables of an owner with integrity?
My thanks in advance,
PhilipsThanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs... -
How to eliminate duplicates when merging photos?
How to eliminate duplicates when merging photos?
OK, time to move over to the Aperture Discussions Group.
It's at this link - https://discussions.apple.com/community/professional_applications/aperture
This group you are in now is for Lion discussions, and over in the Aperture group, you'll meet skilled people who will help. Especially if you state your questions clearly and provide sufficient context such that the reader can figure out what is needed.
Make sure you spend some time reading the Aperture User Guide before asking really basic questions, and search the PDF version using Preview.
Also search that group for your question, it may well have been asked and answered -
How to Eliminate Camera Flash Reflection in Photograph?
I"m using PSE 6.0. In neither of the two instruction manuals that I use do they specifically address how to eliminate a camera flash reflection in the photo. I'm sure there is a way to do it in PSE6.0, but I don't know where to look. Can someone direct me?
Thanks.Larry,
There is no information in the area of the flash reflection - it is completely blown out. The clone stamp tool will not yield a satisfactory result, as the details in the adjacent map area lack contrast, especially in this low resolution file.
I experimented a bit -
I sampled the brown color next to the flash with the eye dropper tool
Created a new, blank layer at the top of the stack
Accessed the brush tool, selected the "Dry Media Brushes" library, used brush #60 (Soft Pastel Large) set at 25% opacity, then on the blank layer painted over area of flash. That does not look too bad, but it lacks the detail of the map
Perhaps you can print this, fill in the map by hand, then scan same.
Someone else may come along with another suggestion.
Maybe you are looking for
-
Adobe Set Up Installer not working
I tried to install Adobe CS6 and for some reason, when I opened the Set Up.exe it said "We've encountered the following issues Installer failed to initialize." Then it advises me to donwload the Adobe support advisor to detect the problem. I've tried
-
Hi My bussiness process is i have created stock transport order purchase order in me21n t.code doc type UB,item category 'U'then i do mb11 t.code 351 movement type Transfer posting to stock in transit from unrestricted-use.then i do the goods receipt
-
Groupware - only synchronise activites with a certain status?
Hello out there, is it possible to set a filter as to only send activites with one certain status e.g. 'open' to the Groupware-Server (Exchange)? If so, when the activity status changes from 'open' to 'finished', are the activities removed from the u
-
HI Guru's I am working SAP BI Consultant, We are unable to execute the queries and getting the following error. "The address is not valid - Windows Internet Explorer" Please provide me solution ASAP. Thanks & Regards, Kumar.
-
Does anyone know how include a labeled 'phase change line' within a Flex chart? These types of charts are normally used to track behavior over time (the phase change denotes changes in medication, etc.). Any advice would be greatly appreciated.