How to eliminate split screen after browser restore?

FF 29.0.1 running on OSX 10.8. From time to time, starting FF (after killing it) and restoring all sessions, results in each tabbed window displayed in a split screen. The upper portion is is about 4" high, followed by a seam, then the actual site. Resizing can completely eliminate the useful portion - unable to shrink beyond the seam.
Opening a new tab results in a split screen; opening a new window displays normally.
The problem only occurs after restoring tabs - never when FF is closed normally.
Suggestions?
Thanks.

Hi nxtr, your Safe Mode test strongly suggests that one of your extensions is creating the gap.
If you haven't recently checked for extension updates, you can do that from the Add-ons page. Either:
* Command+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, above the list, click the "gear" button and Check for Updates.
If they are already up-to-date, you could try selectively disabling the nonessential ones. Hopefully the problem is caused by one of those.

Similar Messages

  • HT4515 How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    How to make sure that after browsing that the webpage is not running in the background, but totally closed down

    Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.

  • How can I retrieve imessages after I restored my iphone to factory settings but didn't back up prior to restore?

    How can I retrieve imessages after I restored my iphone 4 to factory setting and didn't back up prior to restore?

    If you synch your phone to your computer via itunes,it performs a backup prior to synching. You can check by luanching itunes select preferences>devices,all backups should be shown there. If in fact there is a backup of your phone listed then do a restore of that back up.

  • How to enable the screen after triggering the error message

    Hi All,
    we have a tcode IW31, in that one field(WBS element -PROID) is not mandatory. so we have written the following code to make it mandatory in a user exit EXIT_SAPLCOIH_010.It's triggering the error message, but it is going into disable mode. Please sugget me how to enable the screen after getting the error message triggering.
    if not caufvd_imp-proid is initial.
      select single * from t350 into wa_t350
              where  auart    = caufvd_imp-auart
                and  imord    = 'X'.
      if sy-subrc is initial.
        pspel = caufvd_imp-proid.
      else.
        call function 'CONVERSION_EXIT_ABPSP_OUTPUT'
             exporting
                  input  = caufvd_imp-proid
             importing
                  output = l_posid.
        concatenate text-t10 l_posid text-t11
                    into l_textline1 separated by space.
        message i208(00) with l_textline1.
      endif.
    else.
      message e208(00) with 'Please maintain WBS element in Location Tab'.
    endif.
    Thanks

    Hi,
    Instead of error message use status message like
    message s208(00) with 'Please maintain WBS element in Location Tab'.
    Leave to screen sy-synnr.
    This will allow to move to the screen and have in enable mode.
    WIth Regards,
    Dwaraka.S
    Edited by: Dwarakanath Sankarayogi on Feb 13, 2009 7:46 AM

  • How to eliminate confirm screen popup

    when i click back arrow, i get a confirm screen. (to resend)
    how to eliminate confirm screen popup every time?

    You get an alert about resending POST data if you go back to a page that was previously requested from the server by submitting form data via a POST form.
    The only way that Firefox can make sure to get the same page is by resending that POST form.
    Firefox doesn't know what that form data means, so Firefox asks for confirmation before resending that form data as such an action can cause you to repeat an action and buy another item or post a message another time.
    The only way to prevent that pop-up is not to use the Back button, but to open links from a page that was requested from a server by sending a POST form in a new tab (window) with a middle-click or a Ctrl + left-click.
    Then you can close that tab or window to go back.

  • How to eliminate  select message  after Radio button in ADF tables

    how to eliminate select message after Radio button in ADF tables
    example <f:facet name="selection">
    <af:tableSelectOne>
    </af:tableSelectOne>
    </f:facet>
    output:
    radobutton select
    radiobutton select
    please help me regarding this issue.

    Hi,
    this usually has a text String in the header saying "Select and .." which can be changed through the property inspector for the TableSelectOne component
    Frank

  • How to use split screen on a mac like on windows 7

    how to use split screen on a mac like on windows 7

    It does not function the same as windows, in that it does not have an automatic snap function.  You can put multiple apps up side by side though.  You might want to consider using Spaces instead.

  • IPod Touch still stuck on connect to iTunes screen after the restore. iTunes went blank.

    Hi, I'm having problems with my iPod Touch. My iPod went off because the battery was empty. And when I tried connecting it to my laptop to recharge, the "connect to iTunes" screen suddenly appeared. According to iTunes I need to RESTORE it for it to work. And that's exactly what I did. However, after the restore and all, the screen is still stuck on the "connect to iTunes" screen.
    By the way, it's a 2nd generation iPod Touch. And it's an MC model.
    And to make things worse, my iTunes screen is totally empty. The RESTORE option is gone and I really don't know what to do anymore.
    Hope you guys can help me out! I'd really appreciate it. Thank you!

    I really don't know what happened but my iPod Touch is working now!!! Thank you so much! I'm not really sure if it went to DFU mode or not but all of a sudden I can access iTunes App Store already!!! WOOOOAAAAHHHH! And it asked me to type in a new name for my iPod! So everything's good! Thank you so much! Thank you! You have no idea how happy I am right now!
    For my iTunes:
    Thank you!
    P.S: Grrrrrrrr! My bad! I'm new here and I kind of messed up the Correct Answer and Helpful Answer buttons. Sorry. Dunno how to change them.

  • Continuous Apple Start Screen after System Restore

    After accidentally deleting a number of folders from Entouage and unsuccessfully trying to restore them via individual file restores, I attempted a full system restore by using Snow Leopard install disk (white, upgrade purchase) and launching from Utilities. Time Machine backup is located on a USB connected 2TB external drive.
    The Restore indicates that it was successfully completed; however, upon restart, the white Apple screen appears and continuously 'spins'. I have left it to do this for up to 20 minutes before giving up and hard restarting.
    I have tried disconnecting the USB drive on startup, zapping PRAM, running Disk Utility and checking/restoring permissions and verifying disk. When I try starting back up, it does the same thing.
    The machine was working perfectly fine prior to restore (except for my erroneously deleted Entourage folders). Help!

    You're correct. Reinstall your original OS X then run the appropriate Combo Update.
    I'm running OS X 10.6.6 also.
    I did a restore yesterday and had the same issue with the Apple Start screen continually clocking. After researching how others fixed this:
    * I left the restore alone.
    * Booted from my OS X 10.6.3 disk
    * Reinstalled that version of the OS. Received my desktop after the restart.
    * Reinstalled the Combo Update for 10.6.6.
    * Repaired Permissions.
    * For a couple of 3rd party apps, I had to reinstall that app (no biggie).
    All was fine and all my apps and data were intact after all of the above.
    I have read where others with OS X 10.6.5 or earlier didn't have this issue. Seems to possibly be something with 10.6.6.

  • How to get split screen on Lenovo Yoga Pro 2?

    Hi! I recently purchased a lenovo pro 2 and I am loving it. Just one quick question, though. I know your able to have split screen (two completely separate windows on the same display, i.e have Google Chrome on the right half of the screen, and say Word on the other half of the screen). And I am not talking about Windows Snap Window feature.  I thought this was possible to do but have no clue on how to activate it. Thanks for any help in advance!
    Solved!
    Go to Solution.

    split screen only works on metro apps. you need to use the snap for desktop apps. You can run Metro IE and split screen it with MS Word.
    Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

  • How to reposition split screen clip keeping complex keyframing?

    New to PP and trying to learn best practices for split screen sequences.
    Lets say the screen is split into 3 vertical panels each with its own video of a person, the panels created by cropping. Each person has been meticulously position/scale/cropping-keyframed to center their faces in the middle of the vertical panel, rather than bouncing around the frame like in the original clips.
    How do I reposition this center panel to the left side with one fell swoop, keeping all the keyframes so the face is still centered in the panel?
    PPCS6 / mac 10.6.8

    Adjust the Anchor Point of the clip on the timeline:
    MtD

  • I have read the posts regarding the split screen prooblem which I have. I have read the posts and I do not have fox splitter add-on. Is there another way I can eliminate split screen?

    I have firefox installed on two computers. The desktop does not show the split screen, but the laptop does. I have checked the posts and I do not have fox splitter add-on but still get the split screen when I click on a second site.

    Right-click that bookmark and select '''Properties''', then un-check the preference for '''Load this bookmark in the sidebar''', and then click Save.
    Using JavaScript buttons on web pages for "Bookmark this Page" causes that preference to be selected when saving the bookmark in that manner. So, don't use those buttons, use the "Bookmark this Page" feature that is built into Firefox instead.

  • How do use split screen on iMovie on a iPhone 5 ?

    Hello I want to use a split screen on imove on my iphone5 , I want to play more than 1 video at once . I want to use this for when I play guitar I can have 2 at once . Please help !

    It does not function the same as windows, in that it does not have an automatic snap function.  You can put multiple apps up side by side though.  You might want to consider using Spaces instead.

  • Why does my new iPhone 5s keep taking me back to the Hello screen after I restore instead of home screen?

    I've just plugged in my brand new iPhone 5s into iTunes to restore all the info from my old iPhone 4 onto it but instead of coming up with the homescreen with the icons it just brings me right back to the Hello screen and walks me back through the first few questions for Setting Language, Selecting Country, and Choosing a Wi-Fi network and then finally to Set Up iPhone and I select the Restore from iTunes Backup.  At that point iTunes gives me the selection on their screen and I restore from backup.  I see the Homescreen for a second and then it goes through the whole thing all over again.  What's happening?

    Are you sure it isn't just going into standby mode, if you touch the screen when it goes black does anything happen?
    Perhaps a recent software update has reset some settings.

  • How do you split screen for 2 documents

    There's a split screen option for the current document but is
    there a way to split 2 different docs in the same window?

    nope. sorry. we all wish there was a way.

Maybe you are looking for