How to eliminate the delay on my X-Fi Surround 5.1 external sound car
I just bought is. I finally am able to hear my keyboard through my headphones running from my computer.
Only problem now is the delayed response. I hit a note and 2 seconds later it responds.
Any ideas on how I can get the sounds to some through in real time.
I have a 2 sided stereo plug. One end going from the headphone jack on the keyboard (KORG triton)
the other end is pluged into the line in port on my <span class="mainlink">X-Fi Surround 5. sound card.
I have elminated the keyboard as cause. Ive tried adjusting sampling rates and I still get the same delayed response.
I originally had the audigy 2nx which never had the issue.
Any help would be greatly apreciated. Thank you.
Hi Fabryc,
Please refer to this thread.
Similar Messages
-
How to know the delay in redo log apply on Active Dataguard 11g
Hello All,
How to know the delay in redo log apply on Active Dataguard 11g...
Do we need to wait till log switch occurs?
Or is it recommended to schedule a log switch every 15 min, no matter data is updated/inserted or not in primary?
Please suggest...
Oracle : oracle 11g Release 2
OS : RHEL 5.4
Thanks
Edited by: user1687821 on Feb 23, 2012 12:02 AMHello CKPT,
Thank you for the valuable information...
We have not configured databroker.
Output of the query
SELECT * FROM (
SELECT sequence#, archived, applied,
TO_CHAR(completion_time, 'RRRR/MM/DD HH24:MI') AS completed
FROM sys.v$archived_log
ORDER BY sequence# DESC)
WHERE ROWNUM <= 10
Primary...
SEQUENCE# ARCHIVED APPLIED COMPLETED
29680 YES YES 2012/02/23 01:11
29680 YES NO 2012/02/23 01:11
29679 YES NO 2012/02/22 23:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29678 YES NO 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29677 YES NO 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29676 YES NO 2012/02/22 22:02
Standby...
SEQUENCE# ARC APP COMPLETED
29680 YES YES 2012/02/23 01:11
29679 YES YES 2012/02/22 23:11
29678 YES YES 2012/02/22 23:11
29677 YES YES 2012/02/22 22:32
29676 YES YES 2012/02/22 22:02
29675 YES YES 2012/02/22 21:24
29674 YES YES 2012/02/22 19:24
29673 YES YES 2012/02/22 18:59
29672 YES YES 2012/02/22 17:42
29671 YES YES 2012/02/22 17:41
Primary shows yes as well as no...
Next,
From primary:-
SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
From standby:-
SQL> select thread#,max(sequence#) from v$archived_log where applied='YES' group by thread#;
THREAD# MAX(SEQUENCE#)
1 29680
What is the redo transport service you are using? is it LGWR or ARCH ?
Output of query select * from v$parameter where name like 'log_archive_dest_2' shows below value...
SERVICE=b_stdb LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=b_stdb
So is it lgwr already configured...? if yes then how do i see the delay in both servers..
Yes, the network is good as they both resides in same LAN within same rack
Thanks... -
How to fix the delay problem while recording? Can't set the Latency to 0. Win7, CS6,Realtek,C03u Mic
I am using Win7, with CS6, Realtek soundcard and Samson C03U microphone.
There is a problem that's really been bothering me. When I record songs the recorded audio always comes 0.1 seconds after where it's supposed to be and I need to fix the problem every time. How to fix the delay problem while recording? I can't set the Latency to zero. The minimum is 30ms and I still get an obvious delay.
I saw some previous discussions saying that installing ASIO would help. Is it gonna work on my PC?
Thank you in advance guys.You probably should look at a more 'serious' audio interface rather than the Realtek
Yes ASIO drivers are the way to go
If you want zero latency you need to monitor via your audio hardware (hence the 'serious' audio interface suggestion)
There are a heap of reasonable audio interfaces which will do the job for you that are pretty inexpensive and I'm sure that someone will jump in with a suggestion -
How to eliminate the ACTIVE RECTANGLE? in flash 8
hi can somebody tell me how to eliminate the active rectangle
in flash movies. I am using flash 8 but i dont like the active
rectangle around the movie can somebody tell me step by step how to
do it? FLAS 8 VERSIONPlease search this forum or google - it's been the most asked
and answered question everyday for
months - search for:
"Click to activate this control".
hope this helps.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
valla23 wrote:
> hi can somebody tell me how to eliminate the active
rectangle in flash movies.
> I am using flash 8 but i dont like the active rectangle
around the movie can
> somebody tell me step by step how to do it? FLAS 8
VERSION
> -
How to eliminate the JButton��s border or set it invisible?
How to eliminate the JButton��s border or set it invisible? Thanks.
import javax.swing.*;
import java.awt.*;
public class TestJB extends JFrame{
private static TestJB tJB;
private static Container c;
private static JButton j1, j2,j3;
private static GridLayout gL;
public static void main(String [] args){
tJB=new TestJB();
tJB.setVisible(true);
//why I set setOpaque(true) or setOPaque(false) on JButton,
//their result are same???????????????????????????????
private TestJB(){
super(" TestJB ");
setSize(400,400);
c=getContentPane();
gL=new GridLayout(3,1,0,0);
c.setLayout(gL);
j1=new JButton("JButton1");
j1.setOpaque(true);
c.add(j1);
j2=new JButton("JButton2");
j2.setOpaque(false);
c.add(j2);
j3=new JButton("JButton3");
j3.setOpaque(false);
c.add(j3);
}ok. you eliminated it and I made it invisible...
;o)
how would we share the duke dollar??? lolthe result would be: getDukeDollars( null );;-)
But instead of this you can have it und put it onto your thread's duke-dollars(Syntax-Highliting) :))
regards
Tim -
How to eliminate the "Ping" sound when starting and stopping videoing
How to eliminate the "ping" sound when starting and stopping a video on iPhone. Thanks.
I asked my friends on Facebook and one came up with the answer... I just had to flip the little "ring-silent switch" on the side of the iPhone to cut the "Pinging" sound! There's probably another way but this works!
-
How to change the delay for a specific message
Hi,
I need to change the delay for an specific message, So how can I consume message by JMSCorrelationID which is enqueued with delay?
I am using Java and Oracle.JMS classes.
This a sample code of the deque method
public BasicAQData dequeue(int insId)
try
String usr = dbUtil.getCurrentUser();
AQjmsStreamMessage stream_message = null;
int id = 0;
int priority = 0;
int destino = 0;
String selector = null;
String instanceId = String.valueOf(insId);
BasicAQData dd = new BasicAQData();
queue = q_sess.getQueue(usr, queue_name);
selector = "JMSCorrelationID = '"+instanceId+"'";
receptor = q_sess.createReceiver(queue, selector);
stream_message = (AQjmsStreamMessage)receptor.receive(sleeptime);
if (stream_message == null) return null;
id = stream_message.readInt();
priority = stream_message.readInt();
destino = stream_message.readInt();
stream_message.clearBody();
dd.setId(id);
dd.setPriority(priority);
dd.setDestino(destino);
return dd;
It returns the desired message if that is available; however it returns null if the message was enqueued with delay and isn4t still available.
Thanks in advance.Hi Glenn,
Messages enqueued with a delay can be dequeued by specifying message id. In your example,
you can dequeue the message with message_id, change the delay and enqueue the message again.
Thanks,
Brajesh. -
How to solve the delay from 'SWW_WI_ADMIN_CALLBACK'.
Hi expert,
We have a workflow in Send Notified vai SAP Express and
E-mail step that is delayed occasionally. Each time it happens, I've noticed that the log (see below) contains an entry for SWW_WI_ADMIN_CALLBACK that executes
for 10 to 15 minutes before the next step of the
workflow. This does not happen all the time, only occasionally.
Workflow System (Sub)workflow created 15.07.2008 10:08:12
Workflow System Execution started automatically 15.07.2008 10:08:12
Workflow System SWW_WI_ADMIN_CALLBACK 15.07.2008 10:20:05
I want your help about
- What's 'SWW_WI_ADMIN_CALLBACK' ?
- How to solve the problem ?
Thanks for your help.
KP.Have either of you tried a Reset Settings yet? (Settings App -> General -> Reset -> Reset All Settings NOT Erase All Content and Settings.) You could also try just the "Reset Network Settings" first too. Resetting settings will purge your lock screen and wallpaper, and probably some other things that will be annoying for a bit (like turning back on the keyboard clicking sound,) but it seemed to help my problems.
I work on iPhone problems all day (mostly backup and restore right now), so I collect a lot of the debugging logs. I saw a lot of networking error garbage on my 5S right after upgrading from iOS7 that was vastly reduced after doing a reset all settings (I wish I would have tried just Reset Network Settings first, so I knew if that worked alone.)
If that still doesn't help, I would love to take a look at your phone debug logs (like I said, I do iPhone troubleshooting all day, so investigating and hopefully fixing a serious problem sounds exciting to me ) If you want, you can contact me through my company's webpage: http://deciphertools.com/support.html and we can start looking at what kind of errors are happening while the wifi is acting up. You can mention my name directly, Kelly, so you know the message gets to me! (This is an open invitation to anyone having serious wifi problems after the update, not just mendoSYK and tragic330.)
(Note: As I mentioned, the link I am posting is to my company's website. So, I stand to benefit, financially or otherwise, from the link I am providing.) -
How to eliminate the thumbnail picture from a .TIFF picture?
I apologize but could not think of a more suitable forum to ask the question - if someone has an idea for a better place, I will appreciate.
When I create a picture with my (Nikon) camera in the TIFF format, it appears that the picture file contains in addition to the full blown picture, a reduced version of the picture, something like a large thumbnail vrsion of the picture. I found it by trying to create a PDF file of the .TIFF file - Acrobat created a two page file, one with the full picture and one with the reduced picture. It looks that I can't tell the camera not to embbed the thumbnail version.
So my question is, from someone who is familiar with the .TIFF file format, how to eliminate that thumbnail version from the .TIFF file. Must be somewhere (hopfully one) location in the file that when modifying it it eliminates the thumbnail picture from Acrobat's view into the .TIFF file.
As to the question why not simply erase that undesired page from the PDF file - the answer is that I actually going to assemble many (hundreds) such pictures into one PDF file. Acrobat will put all those pictures such that each main picture will be followed by its own thumbnail and therefore I will have to select manually each single thumbnail page before erasing them, extremely tedious. If I could process it at the individual .TIFF file as describrd above, I could easily write a program that does this modification to all my .TIFF files with one invokation.
Many thanks,
DavidTry ExifTool
http://www.sno.phy.queensu.ca/~phil/exiftool/ -
IP/VC 3540 MCU: How to eliminate the local image on the local endpoints?
FACT: When creating a multipoint call using an MCU, the local image has been sent to the local endpoint which may result a slow connection since the video packet were sent to the origin.
QUESTIONS:
1. How can we prevent the local image to be sent to its original endpoint?
2. If it does happen, does it consume more bandwidth?- In a symmetric conference that is setup to allow for 320K video would allow for 320K in and out. It does not get divided in half to produce 160K in and out.
- The EMP has additional features above and beyond the RMM. You can see if the EMP is registered with your MCU by going into the administrative interface of the MCU and clicking on the Registered MPs tab. You should see both the MCU MP and EMP that is your system is using.
- In a continuous presence conference 5 people would need to be in a conference in order for the local image to fall off the screen. This does not really eliminate the participant from the conference; it basically masks their image from being sent since they are not one of the primary speakers. If that person does talk the will show back up in the one of the four squares.
- The only reasoning that I could possibly give for the local image looking good on the Polycom is that it may be sending back the original image to the local party. If you were to have another unit dial into the conference how does the image look?
- Without the Audio Transcoder card you will only be able to handle G.711 Audio. Advantages of the Audio Transcoder card are that it allows you to transcode from G.711 to the following audio codecs.
The IP/VC 3540 audio transcoder modules for the MC03A and the MC06A provide the following features:
= Translates to G.722 codec
= Translates to G.723 codec
= Translates to G.728 codec
= Translates to G.729 codec
= Translation for up to 30 ports simultaneously -
How to eliminate the duplicate rows in the table
How can we eliminate the duplicate rows in the table. Is it possible to write a single query or should we write a pl/sql block to do it
Scope works outwards.
SQL> DECLARE
2 n NUMBER;
3 BEGIN
4 n := 0;
5 DECLARE
6 n number;
7 BEGIN
8 n := 2;
9 dbms_output.put_line(n);
10 END;
11 END;
12 /
2
PL/SQL procedure successfully completed.
SQL> DECLARE
2 n NUMBER;
3 BEGIN
4 n := 0;
5 DECLARE
6 x number;
7 BEGIN
8 dbms_output.put_line(n);
9 n := 2;
10 dbms_output.put_line(n);
11 END;
12 END;
13 /
0
2
PL/SQL procedure successfully completed.
SQL> ed
Wrote file afiedt.buf
1 DECLARE
2 n NUMBER;
3 BEGIN
4 n := 0;
5 DECLARE
6 x number;
7 BEGIN
8 dbms_output.put_line(n);
9 x := 2;
10 END;
11 dbms_output.put_line(x);
12 EXCEPTION
13 WHEN others THEN dbms_output.put_line('oh no!');
14* END;
15 /
dbms_output.put_line(x);
ERROR at line 11:
ORA-06550: line 11, column 27:
PLS-00201: identifier 'X' must be declared
ORA-06550: line 11, column 6:
PL/SQL: Statement ignored
SQL> Cheers, APC -
Each time I start iPhone or iPad I get a message: 'Password required/ Enter the password for the CardDAV account'. Can anyone tell me what that is about and how to eliminate.
Also this began happening the same time my Yahoo mail account was hacked which resulted in my mail program (on mini) to fail. It crashes on startup.
ThanksThanks Steve that did it on my iPad. It was the yahoo account. Im beginning to think that Yahoo is dangerous. It was the hacking of my Yahoo mail account that started these problems. My mail account on my mini still does not work. I posted the problem here and got real professional advice but to no avail it still doesnt work and I cant re-install the OS because Im in China and their Great firewall keeps the net too slow.
-
How to eliminate the alarm "Client License Limit Exceeded" in Lookout 6.0.2?
There are 18 Run Time Only Servers, with no clients, running the same application. Right after the installation of the Lookout 6.0.2 software this alarm didn't show up, but after some time it does in all the systems. It makes not too much sense to me because there are no clients at all, thus no client license was purchased and entered/registered.
How to eliminate this 'false' alarm?
Any help will be appreciated!The design is complex. Within the features, each system collects data in .csv format, and once a day moves a copy of the data collected to some place in the network. Also the systems print to file the events and alarms (once a day as well), then they are copied out with the database to the same place in the network. This folder containing the database and the events-alarms in the network is for other engineers to analize, make calculations, projections, etc. It is weird for me and for the others to have this alarm every day in the events-alarms files of each system.
Each system is independent, doesn't need to have connection with the other systems. There are no clients because the database collection is enough for us. The systems are VERY STABLE, no need to trouble-shoot (remote access), or even checking how they are working. Truly, Lookout shows a good performance with this application. By the way, the application is too extensive, complex, many different things are controlled and monitored, many different communication protocols are used: OPC servers, Serial connections, etc. General speaking, the overall result is excellent. This little, no-reason alarm is the only problem: "Client License Limit Exceeded".
I'll really appreciate any suggestion regarding this issue. -
How to eliminate the noise from the stepper motor
I’m using stepper motors to move a traverse on which a hot-wire anemometer probe is mounted. When the stepper motors are turned on, they induce noise on the analog signal of the hotwire anemometer, or of any other transducer, at multiples of 120Hz.
The stepper drives are P41 Series made by American Precision Inc. The P41 Series contains a power supply, a motor drive and a logic controller. The logic controller inputs are optically isolated and utilize the 5 VDC supplied internally by the drive.
An NI 6251 or NI 6024E DAQ card is used with LabVIEW to send digital output signal to the logic controller in order to step the motors.
The AI input channels of either NI 6251 or NI 6024E DAQ cards and LabVIEW are used to acquire the signal of the hot-wire anemometer. Different DAQ cards are used for the data acquisition and the stepper motor control and the noise is transferred through the laptop to the data acquisition card (analog signal).
All cables are shielded and the noise was confirmed to be conductive and not radiative.
There was no difference when measuring the analog signal with Differential or RSE.
As a test, the leads from to the drive’s logic controller were connected to the AI input channels in order to check the magnitude and frequency of the noise flowing to the DAQ card and were found to be 5 V peak-to-peak at 60 Hz.
Please let me know if you have an idea on how to eliminate this noise.It sounds like you have a ground loop issue. If possible, try totally isolating the stepper controller from the data acquistion AI more than you already have. This could include any of the following:
Ensure the optoisolation on the control lines fully separates the power and ground of the digital output and stepper input.
Use different grounds for the stepper power supply and the DAQ power supply/computer. Isolation transformers can help here.
Use lower inductance lines for the stepper controller. This will reduce the movement of the ground.
I suspect you have probably been over the above, so you are left with filtering the noise out of the signal. Since it has high harmonic content, a simple low-pass is unlikely to work well. Your best bet is probably to characterize it and use some sort of Fourier filtering. If the relative sizes of the harmonics are always the same, you can take the Fourier transform, find the height of the fundamental, use this to calculate the sizes of the harmonics, delete them from the Fourier transform, and do an inverse Fourier transform to recover your signal. Alternately, you can use a series of narrowband filters to remove the noise, although this will also remove any signal at the same frequencies. It is better if you can improve your circuitry to remove the noise.
Good luck. Let us know if we can help you more.
This account is no longer active. Contact ShadesOfGray for current posts and information. -
How to eliminate the extra line in the emaildody while using EMAIL_PLAIu200BN
Hi Experts,
I am using EMAIL_PLAIN option for extended notifications via SWNCONFIG. In the body of the email a horizantal line is getting displayed on the top of the email body. How to eliminate this line??
Thanks and Regards
Srini..Hi,
In tcode SE80, select BSP Application and put SWN_MESSAGE1 in text field. So, you can see plain_indiv and plain_multi HTML. If you click-on this you can see the layout and the standard horizontal line.
If you want to change it, you have to copy this BSP and create a Z one and change the layout. Now, in tcode SWNCONFIG, go to Message Template and change BSP-URL.
Regards,
Maybe you are looking for
-
How to use a query in two different roles without copying it
Hi, The report I try do should display only data that concerns only Controlling area (0co_area) of the user (there is need for two groups of users)). So far I created an authorization where I wrote down "0co_area = 1002" condition. then I created a r
-
Collaborators in SAP Sourcing 10.0 must not view RFx responses unless assigned as scoreres
Dear SAP Sourcing Specialists, We are implementing SAP Sourcing 10.0 We assign collaborators on an RFx as with the collaborator approver role before it is published, and these collaborators review, edit and approve the RFx and then it is published t
-
Getting Date error when I process
Hi All, I have DEV & QA Analysis services on 2 different server. This is 2005 SSAS I am using same solution so DEV process OK but QA gives me date error when I check with SSMS , date fields look fine . But I am getting this error in QA Errors in th
-
How to use Rstxt in smart forms
hi how to use Rstxt in smart forms
-
HT4865 how to register my ipad mini?
how to register ipad mini