How to eliminate the "Ping" sound when starting and stopping videoing

How to eliminate the "ping" sound when starting and stopping a video on iPhone. Thanks.

I asked my friends on Facebook and one came up with the answer... I just had to flip the little "ring-silent switch" on the side of the iPhone to cut the "Pinging" sound! There's probably another way but this works!

Similar Messages

About the bat file to start and stop the weblogic server10.3

I am using windows 2003 os.
i installed the WLS 10.3 .
can anyone help me how to write the bat file for starting and stoping the weblogic server instance.so that it willl run as background service.
I am new to this .Please suggest me
Any help is appreciated.
Thanks
Sailaja.

Hi David,
yes.i am talking about Admin server.
when i am creating the new domain,i didn't encounter any prompt asking me to run the Admin server as windows services.why i am not getting this prompt?where exactly i will get this prompt while creating domain.
i am using the weblogic 10.3
how can i make the admin server as windows services.
Thanks
Sailaja.
Edited by: sj0609 on Dec 2, 2008 4:02 PM

Sound suddenly starts and stops working?

My iPhone 4S isn't making sound. My settings have not changed and I have turned my phone on and off several times. When I click the buttons on the side to adjust, the icon shows on the screen, but the dots for volume are not there. In my music, it plays, but the sound bar is grayed out, and it won't adjust at all when I click it. In some apps, like YouTube, the sound bar is gray as well, but again, I didn't make any adjustments to my phone. I haven't dropped it. It had stopped and started working multiple times. It went in and out while I was getting ready for work this morning. I got a text alert and then the next text it vibrated but made no noise. I don't get the sound when it sends a text or the noise when it locks my phone. It's like the phone suddenly mutes itself but I didn't tell I too. My music has started and stopped as I wrote this message but again, I have done nothing to the phone itself. I assumed this was a hardware glitch because all the advise I have found for this issue is to clean out the sound docks on my phone. I did that already but the issue has persisted. Turning it on and off has not made a difference. I also can't hear calls. My phone is pretty useless without sound.

Hello there, Mac990.
The following Knowledge Base article provides some great steps for resolving your issue:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How to create a .exe script to start and stop Oracle EBS R12 in Linux

Hello,
I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.
Ali

I have installed Oracle EBS R12 in Linux enterprise through Virtual box on windows 7 professional. It takes a long time to start and stop EBS as I have to start and stop the scripts manually - can someone please help me with the following (I have tried searching the web and Oracle for help but have had no joy);
Q1. I want to create a executable file in Linux so I can double click the file in Linux to start EBS automatically instead of going through each script manually
Q2. I want to create a executable file in Linux so I can double click the file in Linux to stop EBS automatically instead of going through each script manually
you help will be appreciated.Please see these links.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Autostart+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Auto+AND+Start+AND+Services&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Managing Server Processes
http://docs.oracle.com/cd/E18727_01/doc.121/e13675/T530130T530133.htm#5274555
Thanks,
Hussein

The "Enter" key keeps starting and stopping itunes songs...

Hey, everytime I hit the enter key for example in Safari to enter a webpage, my itunes songs keep starting and stopping like I have the itunes window active... Does anyone know a solution for this? I tryed reinstalling and no luck...
Thanks

What are the system specs for your pc? It seems it's to slow to play iphone's 720p HD videos. QT 7.7.3 is the latest for windows but VLC Player will play these videos too.

Starting and stopping video and MP3

I can't seem to get around my video and audio files starting when I arrive at the page. I'm even using some example code with start and stop buttons. This is in CS4 Flash. I expect it's because the ActionScript is in the wrong place because when I run the movie it flashes through all of the pages on the site without stopping at the home page. Is there some generic code that will allow me to simply swap out the name of the video or audio file I want to start. If there is, do I need to locate it on its own layer at the top of the timeline? Thanks to anyone who can help.

>>Why is it that the default setting for a video player placed on the stage
is to start playing when the page appears? I would think it would be
paused.<<
I don't know it doesn't seem any more logical to have it paused. I assume it
is just a preference on the part of the developers of Flash.
>>Is there some piece of script that can correct this situation<<
There are several ways to pause the video playback at teh beginning of the
Flash movie. It actually depends on how you have the movie inserted into the
time line. If you used an FLVPlayback component, then all you have to do is
click to select the component, open the component inspector
(window>component Inspector) and se the autoplay value for the component to
false. If you have the video inserted another way let me know.
>>Forgive my naivete but I am trying to learn the ways of Actionscript
wherever I can find it and builds something at the same time.<<
Thats always hard. What tecnology do you normally work with Ajax? C++
The comment about the behavior of video suggests you work with a technology
that has the opposite autoplay behavior.
Jerron Smith

How to start and stop video acquisition in a state machine

hello,
I'm a neuroscience student and here's what I'm trying to do: 1) trigger a GigE camera (200fps), 2) start video acquisition, 3) trigger a light that will stay on for x miliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve simultaneously and 5) stop the video acquisition 1second after 4). For that, my VI is a state machine, with a state for each trigger (ex, 1 state for trigger camera, 1 state for trigger light, ect) plus a state to "stop" and a state "time to wait". Everything was working except the video acquisition - the program would trigger the camera but only acquire one frame, because it wasn't running in a while loop and this is my first question: for a video acquisition is it always necessary to have a while loop?
I assumed the answer was yes, so I built a "consumer" loop for the camera. Putting a queue in the state "trigger camera" in the producer loop, I was then able to start the video acquisition but now the problem is to stop it in the right time. I have another queue in the "stop" state in the producer loop, but it isn't able to start the "stop" state in the consumer loop, I think that may be because the consumer loop gets "stuck" in the while loop.
I hope you can help me, the VI is attached. Thanks!
Solved!
Go to Solution.
Attachments:
trigger_cam.jpg ‏345 KB
trigger_stop.jpg ‏354 KB
Conditioning MS vi 2010.zip ‏68 KB

Hi Gak,
Thanks for the suggestions. I still didn't got it to work though. I moved the stop command to inside the while loop like you said but it didn't work. The problem seems to be in the communication between the producer/consumer loops. When I run the VI in highlight, the queue message "trigger camera" leaves the producer and arrives at the consumer loop in the appropriate time, starting the "trigger camera" state of the case structure. However, the message "stop" doesn't seem to be sent by the producer loop, so the consumer doesn't receive a signal to start the "stop" state of the case structure. Can you think of anything I should change in the producer loop so that the second state (stop) is added to the queue?
About the functional global, I read about it, it seems that either that or a local variable could work, but I don't quite know how to implement it in my state machine, since the stop of the first while loop isn't activated in the "stop" state but in the "shutdown" state. It works more or less like this: after 10 loops of triggering and stopping the camera, light and valve (so after acquiring 10 movies), it goes for shutdown. Can you show me what you had in mind with the functional variable?
Attachments:
Untitled.jpg ‏286 KB

Pops when starting and stopping

I thought that this issue might be related to my m- audio firewire, but i disconnected it and there still occurs a slight static 'pop' when i start or stop a track w/ the space bar. If anyone has had this experience or has any insight to this kind of thing please help...

Thank you, sir. I muted my audio regions and it seemed to considerably decrease this 'popping'. However, I tried this on a piece with multiple midi tracks and it's still pretty evident, especially moving the pointer around. I am mainly concerned if there is something either wrong with my electric setup or something otherwise damaging, but it is annoying as well... thanks again for your reply.

Iphone 3G shows Apple logo when starting and stops there.

Hi, I just got an Iphone 3G 16GB yesterday from a person who had it for 10 days and did not like it. Before giving it to me me he did a general reset using the optino in the settings menu. When he gave it to me the Iphone was still doing the reset and it took 2 hours and 40 minutes to end it. At the end of the reset the screen showed the Apple logo and does not go further. All of this was done with the Iphone plugged in a power outlet to avoid interrupting the operation.
I left it on for all the night just hoping it was a very long procedure but with no results (still the Apple logo and nothing else). This morning I tried to turn it off keeping the sleep/wake button pushed for some time but id did not even shut down. The only way I found to shut it down was to to push the Home button and the sleep/wake button together for a few seconds. When I tried to turn it on again pushing the sleep/wake button it showed the Apple logo again and nothing happened.
COuld someone help me?
Thanks in advance.

Just to report that the problem was solved with Apple Support. They asked me to start Itunes, connect the usb cable to the computer, push the home button while connecting the USB connector to the Iphone. This way Itunes recognized the Iphone in recovery mode and restored everything automatically.
Now the Iphone is working perfectly.
Hope this helps.

Starting and stopping Video File that is Attached to Augmented Reality

I'm trying to do a little augmented reality. I'm using an action script to call a video and play it. The problem that I'm having is that the sound is starting the moment the window is open and the video plays with the marker is shown. I want the sound and video to only play when the marker is seen. I would like it to pause when the marker is removed and then resume where it left off when the marker is seen again. Here is a copy of my code if someone could look it over and tell me what I'm doing wrong. PLEASE PLEASE PLEASE just correct my mistake. I don't understand enough about coding for you to just say Netstream.pause() and netstream.resume. I don't know where to put that information in. ANY HELP is appreciated greatly.....
package {
import flash.display.Sprite;
import flash.events.Event;
import flash.display.BitmapData;
import flash.display.Loader;
import flash.net.URLRequest;
import flash.media.Video;
import flash.net.NetConnection;
import flash.net.NetStream;
////////////AWAY3D FOR
COLLADA//////////////////////////////////////////////////////////////////// ////////////////////////
import org.papervision3d.lights.PointLight3D;
import org.papervision3d.materials.MovieMaterial;
import org.papervision3d.materials.WireframeMaterial;
import org.papervision3d.materials.shaders.EnvMapShader;
import org.papervision3d.materials.shaders.ShadedMaterial;
import org.papervision3d.materials.shaders.PhongShader;
import org.papervision3d.materials.BitmapFileMaterial;
import org.papervision3d.materials.VideoStreamMaterial;
import org.papervision3d.materials.utils.MaterialsList;
import org.papervision3d.objects.primitives.Plane;
// import org.papervision3d.objects.parsers.Collada;
public class test1 extends PV3DARApp {
private var _plane:Plane;
private var _plane2:Plane;
// private var _piso:Plane;
private var videoStreamMaterial:VideoStreamMaterial;
private var quality:uint = 8;
private var netConnection:NetConnection;
private var video:Video;
private var netStream:NetStream;
private var videoStreamMaterialPiso:VideoStreamMaterial;
private var quality:uint = 8;
private var netConnectionPiso:NetConnection;
private var videoPiso:Video;
private var netStreamPiso:NetStream;
*/////////////COLLADA FILE
VAR//////////////////////////////////////////////////////////////////////// ////////////////////
// private var loader:Loader;
public function test1() {
// Transferring the file name of the camera revision file and the
pattern defined file, it initializes.
this.init('Data/camera_para.dat', 'Data/flarlogo.pat');
protected override function onInit():void {
super.onInit(); // Al be sure to call.
//Apply Filters
// The same size as the marker it tries making Plane.
var wmat:WireframeMaterial = new WireframeMaterial(0xff0000, 0,
0); // With wire frame.
this._plane = new Plane(wmat, 80, 80);
this._plane.rotationX = 180;
this._baseNode.addChild(this._plane);
var light:PointLight3D = new PointLight3D();
light.x = 0;
light.y = 1000;
light.z = -1000;
///////////////FLV FILE
HERE/////////////////////////////////////////////////////////////////////// ///////////////////
var customClient:Object = new Object();
customClient.onMetaData = metaDataHandler;
netConnection = new NetConnection();
netConnection.connect(null);
netStream = new NetStream(netConnection);
netStream.client = customClient;
netStream.play("FNF_Intro.m4v");
video = new Video();
video.smoothing = true;
video.attachNetStream(netStream);
videoStreamMaterial = new VideoStreamMaterial(video, netStream);
videoStreamMaterial.doubleSided = true;
_plane2 = new Plane(videoStreamMaterial, 130, 130, quality,
quality);
this._plane2.z = 50;
this._plane2.rotationX = -90;
this._plane2.rotationY = 180;
this._baseNode.addChild(_plane2);
function metaDataHandler(infoObject:Object):void {
trace('metaDataHandler',infoObject);

Helpmeun,
   I am still learning PV3D and AR but from looking this is the only thing I can think of.... not exactly sure what you are doing, but if you only want the video to play when the face of the plane with the video is visible... try something like this....
In your AR code.... most people add a listener to the stage or application for the ENTER_FRAME event and use that for doing their maker detection (I use a timer, but either way it is a modification to your event handler function)... something like....
constructor or creationCompleteHandler()
    // FLAR initialization code
   // PV3D initialization code
   stage.addEventListener(Event.ENTER_FRAME, updateRenderHandler, false, 0, true); // This would probably go in your onInit override
The code you are wanting to change is the code in the handler function when it detects or doesn't detect the pattern....
private function updateRenderHandler(hEvent:Event):void
          // Capture the video as bitmap for pattern recognition
          m_hBitmapRenderer.draw(m_hVideo);
            try
               // Redetect and see if it is high confidence.... then update and show
                if ( m_hFLARdetector.detectMarkerLite(m_hFLARraster, 120) && ( m_hFLARdetector.getConfidence() > 0.75 ) )
                    // Get and set transform matrix from detector and update model
                    m_hFLARdetector.getTransformMatrix(m_hFLARtransform);
                    m_hFLARcontainer3D.setTransformMatrix(m_hFLARtransform);
                    // Re-render the scene
                    m_hRenderer.renderScene(m_hScene, m_hFLARcamera, m_hViewport);
                    // Show viewport
                    m_hViewport.visible = true;
                    // !!!!!!! YOUR CODE SHOULD BE
                    m_hNetstream.play();
               // The pattern is not recognized in the video
                else
                    m_hViewport.visible = false;
                    // !!!!!!! YOUR CODE SHOULD BE
                    m_hNetstream.pause();
Hope that helps.....
JJ

Correct way to start and stop video

Hi All.
I have about 10 flv's in different states. I'm finding that I have to find ways to not only make play interactions but stop interactions for all the other videos
i have in the project otherwise they will all play at once, what am I doing wrong??
Laz

Hi Laz,
There is a property for videos called "Auto Play". If that is checked, videos will start playing immediately.
Merely hiding a video does not cause it to stop playing. If you hid the video by clicking the eyeball, you just hid the video. You need to remove the video from all the states in which it does not exist. To do this, select the video in the layers panel, right-click, and choose "Remove from State", then choose a state. You also might find "Share to State > Current State Only" helpful.
-Adam

Was attempting to use my itouch 4 th generation to play my itunes through my receiver the 1 st song started and stoped after a few seconds so I powered off the itouch and the clockwise circle has been spinning fro the past 20 min ...any thoughts or ideas?

I was attempting to play itunes through my receiver with my itouch 4 the 1 st song started and stopped a few seconds later so I powered off my itouch and the clockwise circle has ben spinning for close to 1/2 hour any suggestions as how to get the thing back to normal...............

I was attempting to play itunes through my receiver with my itouch 4 the 1 st song started and stopped a few seconds later so I powered off my itouch and the clockwise circle has ben spinning for close to 1/2 hour any suggestions as how to get the thing back to normal...............

Hard drive starts and stops a few times

I went to my parents for the Christmas holidays today and tried to use their older computer to put music on to my iPod. Since it's so old I couldn't use iTunes, so instead I used Ephpod. After it was done copying the files to the iPod I saved the changes and disconnected, but immediately afterwards instead of going straight to the menu, the hard drive started and stopped about 10-15 times with the Apple logo being displayed. Now I can't reach the menu, the hard drive will start and stop spinning until it gives up, and when I reconnect it to the computer it won't even recognize it as an external drive. Any ideas?
eMac Mac OS X (10.4.3)

I have the same issue and the iPod wont reset.

Start and stop acquisition using a pulse train

Hi
As illustrated in the attached picture I would like to use a pulse train ( connected to PFI line) as a triggering devide to start and stop acquisition on rising edge
Could you please help me to do it in LabVIEW. My problem is I have to use the same line to start and stop ( trigger and reference trigger ) and both should use rising edge
Thanks
Attachments:
pulse train.jpg ‏33 KB

tintin_99 wrote:
I greatly appreciate help on this. How can I use a pulse train to start and stop data acquisition on rising edges as described in attached picture.
Have a look here
CLA, LabVIEW Versions 2010-2013

Start and Stop of Services for 11x

hi
Can anyone please let me know the order to stop and start the services of 11x (HSS,PLANNING,ESSBASE and BI)
Haven't found any documentation to in the portal related to start and stop of the services.
thanks in advance
Best regards
krishnatilak

I take it you mean the order to start/stop services.
You can find the list at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install/ch05s02.html
Cheers
John
http://john-goodwin.blogspot.com/

How to eliminate the "Ping" sound when starting and stopping videoing

Similar Messages

Maybe you are looking for