How to email reports via SMTP server FORMS AND REPORTS 6i and databse 8i

Dear All,
through reports builder reports are build but i need to email reports via SMTP server is it possible in 6i are not?if yes the how please rep asap

If it will be a scheduled report, you can create a batch file to run report with reqd parameters and generate it's pdf in a oracle directory.
Then schedule the batch file on oracle database pc, (thru task scheduler if OS is windows),
Then a email procedure will be required which will pick up the pdf from oracle directory, attach it and send mail.
Even the email procedure can be scheduled thru oracle job, but the OS batch schedule time and Oracle Job time should be handled as some gap will be needed between the two.
As for the email smtp procedure with attachments, you can find one in this forum or try googling it.
Regards,
Amol

Similar Messages

I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

I have set up a new email account however it is unable to connect to the smtp server as it seems to be offline - how do i take the smtp server online?

the smtp server is the property of the mail provider and running in their server room
talk to them
and make sure the ports required by the mail providers smtp server are not blocked by your firewall or by your router or by your isp

How to poll emails from a SMTP server

Hi, It seems all the examples I found were to construct/send emails to SMTP server. How to build a module to retrieve emails from a SMTP server and then extract the info? I checked the javax.mail.Transport
class and could not find method such as getMail or getMessage. Thanks,

Close but so far... ;)
You'll want to check out the rest of the [url http://java.sun.com/products/javamail/javadocs/index.html] JavaMail API classes . In particular take a look at the Store and Folder classes.
One last thing - here's a really good [url http://java.sun.com/developer/onlineTraining/JavaMail/] tutorial that may help.
∞ brewman ∞

Send iCloud email from alternative smtp server?

How do I send iCloud email from alternative smtp server? The setting is 'greyed out' on my iPhone so I cannot tell iCloud to use another server.
The reason is so I can have my outgoing email appear from my own domain email address rather than my me.com address. Mobileme would allow this - and Mail on the Mac does allow it, but the iPhone under iOS 5 seems not to allow it....
Any ideas?

I have spent about 4-6 hours working directly with folks from Tim Cooke's office, various support levels, and through them their engineers.
As much as I tried to convince them their logic is flawed, the engineers for iCloud come back and say this is expected behavior because somehow it helps secure iCloud from being a spam source. The fine and helpful gentleman from Cooke's office now understands how it is a MobileMail.app client issue, having nothing to do with iCloud servers (because we are in fact trying to bypass their servers) still totes the "it's expected behavior" line from the server engineers.
I have implored him to follow up with the iOS MobileMail app programmers and not the iCloud programmers. I am hopeful he will. Until then you have to choose between having iCloud push and losing your online identity, or losing push email and keeping your preferred address.
Fun to try: turn off all smtp servers. Send email. Gets stuck in outbox. Turn on your preferred smtp server. That one email will use your preferred alternate address, but subsequent ones revert back to the old .me.com smtp servers. Personally I believe this points to a client programming error more than reinstating a preferred behavior. Aggravating!
I spend $500 on a new phone. Google takes away my exchange client ability and apple makes me choose push email vs outgoing email address.

I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone

I send mail via SMTP server with Hebrew text, and I get it gibberish on my iphone

What mail program from what kind of computer are you sending your email? It sounds like an encoding problem that would have to be solved on the sending end. If you want, send me an example of the kind of email which arrives as gibberish on your iphone (tom at bluesky dot org).

How to set up a mail server with a private DNS and relay over a public mail

How to set up the mail server that we can send and pick up emails inside and outside?
Our private network has the DNS name dnsname1.private.
We have our privat DNS Server and he can forward requests to outside over our router.
Our public emails are hosted by an internet provider. This dns name is dnsname2.com and dnsname2.org.
How we have to set up our mail server that we can pick up our emails from our public dnsname2.com?
And when we write an email how we have to set up it that the dnsname is dansname2.com and not dnsname1.private?

If you want to move your mailservice to your own (internal) server, start by making sure you can recieve traffic on port TCP 25 (SMTP). Some ISPs blocks this port, especially on "non business" connections.
Can you send mail from your LAN directly to where your mail is hosted using port 25 TCP or do you have to relay via your ISP?
You have a static public IP?

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
How to correct that
Thanks in advance for any hint you can provide.

I've had the same problem. This solved it...
Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
Hope it works for you to...

How do you create hierarchical folders in Forms Central to organize and manage multiple forms?

How do you create hierarchical folders in Forms Central to organize and manage multiple forms?

Hi,
We do not support this feature right now. Someone else has posted this to our ideas forum, here - http://forums.adobe.com/ideas/1587. I suggest you vote for it, because we look at the popular ideas to help guide us on what new features work on.
Thanks,
Todd

How to config Gmail SMTP server for Crystal Report servers

Hi Experts,
My customer is using Gmail. They need to send out email from Gmail account via Crystal Reports Server to do some reports bursting.
I tried many ways to setup in both CrystalReportJobServer and DestinationJobServer, but just got the following error message.
[AccountsID (8caa73d5-fd2d-469d-8ef2-4d8bd277dc20)]. login error. [[CrystalEnterprise.Smtp] ([1]/[1])]: [SMTP Server does not support authentication. Return code: [SMTP 502 - Command not implemented.].] (FBE60013)
User name and password are correct. It seems it just cannot get authentication.
Anyone can help? Thanks in advance.
Regards,
Christina

Hello,
Sebastian is right. BO doesn't support SSL for email.
However, there is a workaround by using a program sTunnel which redirects a default connection to a SSL connection.
Have a look at the note 1611420 which explains on how to do it.
(https://bosap-support.wdf.sap.corp/sap/support/notes/1611420)
This will not be supported by BO of course but feel free to test it
Regards,
Philippe

How to send email to a SMTP server over a secure channel using STARTTLS setting of a send connector (Exchange and SMTP server are in the same domain)

I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!

-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET,

How to run the report via application server

Report not running?
hi All,
I am calling the report via forms, In application server i had recompiled the reports in two different format too.
1. myreports.rep
2. myreports.jsp
I have called the report from the menu and i used code like below
Declare
      V_id Varchar2(100);
Begin
    V_id := Run_Report_Object('myreports');
End;but i am getting following error.
Frm-41219:Cannot find report:Invalid ID.and subsequently an another too.
Frm-40738:Argument 1 to builtin RUN_REPORT_OBJECT cannot be null.please guide me
kanish

I using Forms 10g R2, i store the recompile version in Application server.
Good, so you can refer to the metalink note I mentioned above, as per storing the reports in the application server, the default place for running reports is not a folder in the FORMS_PATH, the REPORTS_PATH is set in the $ORACLE_HOME/bin/reports.sh file, pointing by default to the sample folder - $ORACLE_HOME/reports/samples/demo, for testing purposes you can put your report there and try it again, or you can modify the REPORTS_PATH variable in the reports.sh file to point to the directory you were mentioning.
Note: I am calling the report throug menu using the eariler posting code.
I would recommend to create a Form to call the Report, I am not sure if there are restrictions about invoking a report directly from the menu.
About the code, you are missing a lot there, refer to metalink note mentioned above, here is an excerpt from that document.
PROCEDURE TEST_REPORT IS
repid      REPORT_OBJECT;
v_rep      VARCHAR2(100);
rep_status VARCHAR2(50);
BEGIN
repid := find_report_object('report5');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,CACHE);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'html');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,'repserver90');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'paramform=no pdeptno='||:dept.deptno);
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
    LOOP
      rep_status := report_object_status(v_rep);
    END LOOP;
IF rep_status = 'FINISHED' THEN
    /*Display report in the browser*/
    WEB.SHOW_DOCUMENT('http://<YourServerName:8888/reports/rwservlet/getjobid'||
   substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
    message('Error when running report');
END IF;
END;
In my eariler version 6i (2 tier) when i call the report it invoke parameter form. will 10g also behave same like 6i?
Yes, there is still a parameter Form which runs in an HTML page.
*1. Should i want to create any Report_Path, Report_classpath ? if yes ,where should i ?* It will depend on your configuration, the easiest way is to setup the REPORTS_PATH in the $ORACLE_HOME/bin/reports.sh file, if you are configuring the reports server to use environment ids, that would not work and you would need to setup the REPORTS_PATH directly in the reports engine configuration file .. $ORACLE_HOME/reports/conf/rwserver.template.
Edited by: Rodolfo Ferrari on Jun 3, 2009 3:19 PM

How configure sending CDR reporting via ftp server

hi
i want to send the CDR reporting automaticly to FTP billing server each 1H.
i have add the billing server
i don t know how or when can i configure the automatique sending CDR report to this server
Thanks for your help

You'll need a SFTP server instead of FTP.
For instructions, please see here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_1_2/admin/sacdrm.html
Thanks!
Michael
http://htluo.blogspot.com

HT4519 How do I use one smtp server for multiple accounts?

I have 5 email accounts on my iPhone.Though they are different providers, I've been using the same smtp server. To simplify my life, I'd like to delete 4 servers. However, each is considered a Primary server and is undeletable. How do I get around this?

Direct your downloads to Users-Shared

How do i change primary smtp server?

How do I change my primary smtp server? I can delete all the old accounts I no longer use as email accounts, but the primary smtp server for the accounts I still use is still set as that for the old server. Not only is there nowhere to delete it, I can't even change it! There should at least be a button to take you to that page in the iOS6 settings somewhere easy to find, like IN the same place as where it is listed.
Very annoying.

What did not work? You could not add an additional SMTP server? It does not matter what the primary is listed as....turn it off. Then turn on the additional server you added.
Better yet remove your .mac account and add it back as .me account.
.Mac to MobileMe transition FAQ
http://support.apple.com/kb/HT1932
Message was edited by: iphone3Gguy

How to email reports via SMTP server FORMS AND REPORTS 6i and databse 8i

Similar Messages

Maybe you are looking for